As a long Time Warner Cable customer, I've gotten used to how their DVR boxes work (and am very glad to be off of them now). One very common thing I would do is start watching a show, and mid way through it decide I want to record it and watch it later. The nice thing was that the recording would contain everything I had watched up to that point plus the remainder of the show. Well... whenever I do the same thing in media center, I notice that the recording starts at the point of where I pressed the record button as opposed to from the start of when I started watching. Is this a limitation of Media Center or is something not set up correctly on my end?
Got my computer back from having its PSU fixed, and this is happening.When I press the power button, it powers on for a second, then off, then back on again automatically and actually stays on this time. It does this every time.
(Fresh installed Win7 Ultimate 64bit)I used Aero Peek a couple of times earlier without any problem while multi-tasking. and after 15 minutes, this sh*t starts to happen!When I press the Windows Button on my keyboard, my computer shuts down! I thought earlier that I just pressed it and clicked or highlighted the "shutdown" button on the start menu. But I have tried it a dozen times, that when I press the Windows Button,?In fact this is the second time that I am posting this thread because I accidentally pressed the d*mn Windows Button again.
My aunt got a lap top, can't remember the name of it. It's running win7 64-bit.When you press the power button, instead of turning off, it just goes into standby.
I have two new Windows 7 computers (laptops) that I run 3D design software on. I have multiple programs that utilize a simultaneous pressing of both left and right mouse buttons (not double-click). This command goes unrecognized in my software and is used extensively to go into 3d rotational manipulation. I also have a mouse that has the central scroll-wheel button that will activate this feature, but the dual button press also goes unrecognized from from the mouse. My old XP computer recognized this input just fine. I have already been through mouse properties and found nothing obvious. I have also checked for updated mouse drivers.
Whenever I press the media button on my remote, my Xbox starts up. Is there anyway I can stop that short of putting some tape over the IR receiver on the Xbox when I'm not using it?
my lenovo laptop is not starting when i press power button it start showing lenovo flash screen then stop working showing a blink in left side of screen
I am using Lenovo Ideapad g460 windows 7 home premium. From last 3 days it just hangs without showing any error, most of the time the screen is black with all the lights on. I try to press ctrl+alt+del but nothing works not a single key except the power button works.
I have check my even viewer only one error I have found most of the time this error is there Event ID 7026 with following details The following boot-start or system-start driver(s) failed to load: TPPWRIF. I have tried to find this file TPPWRIF in my system but its not there. I was using preinstalled Mcafee AV but now I am using BitDefender (paid) AV. I am also using IObit Security 360.
I would like a way to program my notebook computer to 'turn off' not 'shut down' when I press the power button, like a desktop computer would. In Windows 7, there does not appear to be that option available in the list of available options under 'Power options'.
My Asus Laptop needs to press F1 during booth every Time, there is no message to press F1, during booth the screens stops on Asus screen, Black and White, then to continue booth i always need to press F1, I already set Bios to default but the problem still occur!
I have a windows 7 hp laptop model dv6000 and I want to check all my hardware components through the BIOS. I know that the key is f2, but whats the best time to hit this key..........
Whenever I press the sleep button on my computer, or when I leave it idle and it goes to sleep by itself, I get a blue screen of death. I would really like to solve thiNow, this computer came with an AMD video card, but I uninstalled those drivers and took out the video card and installed a GTX 570 from EVGA. The drivers are up to date, so I am pretty sure the new hardware is installed correctly. Furthermore, it was not doing this for the first few months of having the video card installed. This is very recent, so I don't understand what it could be
When I click the start button my pc restarts everyime without warning or error. I have formatted it and it does no good. I am using windows 7 64 bit sp1.
the time in the taskbar goes back one hour after restart. When readjusting it to the exacttime, the radio button 'apply" is greyed out and does not react when clicked. The adjustedtime remains ok until restart when it goes back one hour again
WHen you copy a file in Windows 7 do previouly deleted records & sheets exist in the new file (Excel file)? If they do is there a method to "wipe clean" the deleted records & individual sheets? How about SQL data base records that are deleted. How do you "wipe them clean"?
I've been looking around for 2 days I and haven't been able to solve this. At first I thought my headset had died. so I bought a new one, but windows still des not record any sounds. (used ventrilo and the vocale windowsetup to see if it picked up anything, it doesn't seem like it.Then, I figured it was the onboard sound. So I grabbed a spare soundcard from the shop and installed it, but the result stays the same.I tried boosting to +30 DB, all people get is static, no real sound capture. I uninstalled and and reinstalled the manucaturer drivers as others have suggested in other threads but it didn't work either.I am thinking the problem is with windows itself, but I would like to avoid reinstaller everything from scratch (saving myself 7 hours!)
ImageShack� - Online Photo and Video Hosting I just did a 2 pass overwrite of my entire HDD using copywipe, but yet Easus is still finding over 60,000 + NTFS file records and near 4,000 files identified?Why didn't the overwrite erase this data? I don't understand - I've been at this for a whole day now. I literally formatted, booted from a usb and ran copywipe, did a 2 pass overwrite, and reinstalled windows. How do I get rid of these NTFS file records?I'm looking through my RAW recovered files and it's still all there...
My printer keeps giving me the error message "A printer error has occurred, turn off the printer, then press on button to turn on. See your documentation" I have unistalled it held down the on button and cancel button at the same time to print a test paper, but still can't get anything to print.
I only learnt about this a couple of weeks ago!If you want to make the Aero Peek button at the far right of your Taskbar into a plain and simple Show Desktop button:Simply right-click the Aero Peek button and un-check the "Peek at desktop" option. Et Voila!! That's it!
recently I used a software AVG PC Tuneup and it has never been a problem for me until a couple of days ago when I decided to install it on my DELL. Now, I went to system advisory and did a system scan on recommended settings, I pressed 'fix selected' and my Wifi was disabled, I tried everything. I can't get my wifi to work without plugging in my modem directly ot my pc. I noticed my wifi radio was disabled, so I pressed the F2 button but nothing worked. I am trying to re enable my wifi radio / wireless radio connection button but it won't work.
My program intel my wifi utility tells me my wifi is disabled but I can't enable it.
System information Manufacturer: Dell PC Model: Inspiron N5010 System Type: 64-bit Windows 7 Professional Screen Caps
Ok so when ever i hold w button and pressing up button its not scrolling or not moving up i mean i play fifa 11 and fifa online i have w as sprint i cant sprint up.
I am running dual monitors and when I use PSR.exe it "records" both monitors even if one monitor is off.I would like to use only one monitor when running PSR, but see no option to do so
When i press my left mouse button it should trigger another button on the keyboard, and as long as left mouse button is pressed they key on the keyboard stays pressed (virtually of course).
I have not been able to get any email on my [url]..addresses. My verizon mail works and some of my hotmail accounts work. Also, I can't seem to get onto most microsoft sites.
About a month after I started using it, the Say the Time clock program I bought stopped launching the management menu when I right click the date/time field in the task tray (notification area).
Therefore, I can't use or edit the program. Neither the touchpad nor the cordless mouse works.
Other than this problem, my computer works great. Every single item that's meant to be right clicked works for me.
Is there a way I can generate a log to show the software manufacturer (Provenio) that it's their problem and not mine? I am a novice user but I can follow instructions. However, I don't want to put my computer at risk if I make an entry error.
I've been using computers for 18 years and I've never had this problem until I bought this software and used it for about a month.
I just wanted a conclusive way of putting the ball back in the manufacturer's court.
I spilt some water on my laptop a few days ago but fortunately it's completely dried out and working perfectly.... apart from this minor (but important) issue.
Problem: the system time does not stay correct. Even after manually updating the BIOS time and also even after manually syncing it with the various servers available under the time options.
Fix: set the internet time sync interval to every minute rather than its default setting? How do I do this?
P.S. This couldn't be a CMOS battery issue surely because even when the system is on and plugged in the system time still deviates from correct. (I assume the CMOS battery is only used when the system is powered off.) If I need it replaced, how does that sit with my Dell hardware warranty?