Just Built Computer But Cannot Get Windows 7 To Install
Jun 28, 2010
I just built a computer, but it will not load an OS. I got Windows 7 x64 to load once, and everything worked perfect for about an hour while I updated my drivers and whatnot, but then it froze and erased the hard drive. I've been trying to install it the exact same file in the same way off my flash drive and it just won't work. I've tried to switch the ram around and remove one each time, using the cd, using a friends cd, using new connectors from the cpu to each drive and I even tried installing Windows Xp pro but it didn't work for any of that. Here are the parts that I put in my computer, maybe some aren't compatible with each other? [code]
View 3 Replies
ADVERTISEMENT
Dec 14, 2012
First time building a new pc. A new motherboard, new dvd/rw ram, old hard drive. I used the old case from my old computer - power supply was already connected so did not change it. System boots up fine but when I start to install windows computer shuts off. I have a seagate hd so I downloaded seagate tool and wiped the hardrive because I was thinking that may be the problem. Tried to install windows again computer cuts off. Whet in and checked the ram using windows.
View 14 Replies
View Related
Sep 18, 2011
I just built a new computer ordering the parts online & putting them together and I have come to the stage of trying to do a fresh Windows 7 install on the HDD. But, for some reason when I get to the step of selecting which hard drive to install on, Windows can't detect my hard drive. A Samsung 1TB F3 Spinpoint SATA II. The weird thing is that it shows up fine in the BIOS. I've tried changing SATA connection port on the motherboard (this changes which channel it is listed under the BIOS. i.e Channel 1/2/3 Master/Slave) but Windows still can't detect it. So apparently I need to format the hard drive before I can install Windows on it. I've been told this is easily done using the Windows 7 disk but I am still having no luck. It can't detect the hard drive to format in the first place. When I press Esc to go to the boot manager there isn't an option to format there either. And when I browse for drivers under Windows installation, I click on C and format and an error message appears saying check that it's connected properly or it's read-only. I have also tried burning boot disks and running them but they just won't run when I insert of disk and boot from CD-ROM.
View 14 Replies
View Related
Feb 1, 2012
I have put together a computer, new motherboard, processor, hard drive, everything. Now I'm trying to install Windows 7 from a boot DVD, but obviously have no drivers installed, so my computer doesn't communicate with my monitor. I guess I'm stuck between needing the driver installed, but needing Windows to install the driver? Do I need to install MS-DOS or something first?I have a completely blank hard drive. Trying to install Windows 7 Pro, 64-bit.
View 9 Replies
View Related
Apr 25, 2012
I have built my own pc and i know it works and all that but when i insert the disk for windows 7 Prem i get as far as to select drivers to be installed. It says no drivers were found?
View 20 Replies
View Related
Mar 8, 2011
A newbie and i want to build my own computer..i would like to assemble the parts on my own..can u guys give some guide to install the OS on a new built computer..can i install win 7 using usb drive on a new pc? im planning to buy two HDD..can u guys give a guide to set up RAID0
View 4 Replies
View Related
Jun 29, 2011
I need to upgrade from Win XP 64 to Win 7 x 64. 1/ What is the difference between Win 7 Oem version and Win 7? Can I use either - are there problems? 2/ Occasionally I need to do a clean re-install ( Upgrading PC neds HDDs etc). With XP 64 re-activation is not a problem, I bgelieve Win 7 only permits one activation - is this correct and if so how are cases such as hardware upgrades and fatal crashes handled?
View 3 Replies
View Related
Nov 6, 2011
So I recently put together a computer for a friend of mine. We booted it up, and everything seemed to be fine. Unfortunately, he has been having intermittent BSOD crashes, often when installing new software (though not always). We've tried reinstalling Windows 7 (64 bit) several times, and I've had him run various RAM and hard drive diagnostics, which have (so far) not indicated any issues. My suspicions are beginning to point towards the motherboard or power supply, but honestly I'm pretty inexperienced when it comes to analyzing dumps. I've attached the relevant dump files. I don't have a full list of hardware directly at my disposal, but if necessary I can have him run a dxdiag tomorrow.
View 1 Replies
View Related
Aug 11, 2011
I have Windows 7 on my computer. I have built-in Windows Defender. Is Windows Defender useful? If not, specifically how can I delete it from my computer?
View 3 Replies
View Related
Oct 1, 2012
build a new computer and now that I've got it up and running, I'm trying to go through the long line of the windows updates. At some points, the computer will just freeze up and crash, or randomly shut off, during these updates. Not all of them, but some of them. A lot of the time it will occur while I'm doing something else, so I've tried to update some of them and not use the computer at all while it's doing them, but I've still encountered some crashes this way.I can't remember all of the updates it has crashed on, as it has crashed around 5-6 times give or take, but the latest ones it crashed on were the general/security updates for microsoft .net framework 4[CODE]
View 10 Replies
View Related
Apr 29, 2011
I guess my title says most of what i want. I've ordered parts for a new pc, but because of my budget I did not buy the cd drive in order to buy better parts for my pc. For two years, I've never used my cd drive so I didn't need it anyway. But now I need a way to install windows 7 on my pc without using the cd drive. I have a question if there is a way to install windows with a usb. I have a laptop at home which i can use to create the usb.
View 6 Replies
View Related
Nov 6, 2011
I have read several accounts of people building a computer and installing the OS from a windows 7 upgrade disk.
View 8 Replies
View Related
Jan 1, 2013
I have just built a new computer and i am wondering if it is possible to use my old windows 7 OS on a hard drive on the new computer. old computer was a HP pavilion elite-141f and the new computer has AMD fx-8350 , asus GTX 660 TI and a gigabyte motherboard
View 5 Replies
View Related
Apr 29, 2012
I needed to upgrade anyway, so I bought a new motherboard, new SATA HDD and a new copy of Windows 7 Home Premium..I had problems with th initial install, it started hanging three quarters of the way through, I checked online and found that if I disconnected all USB connections it installed fine.Now installed it won't load up correctly, or if it does it crashes almost straight away, it runs fine in safe mode, but I can't use Windows Update in safe mode.Rather than reinstall again.I've got the feeling the problem may relate to the build rather than the software, but wanted to check if anyone had experienced similar problems?
View 3 Replies
View Related
Nov 23, 2012
I have built many computers but am having a little bit of a problem with some things and my new one. My new install went great. All programs installed without a hitch. Fast and furious is the way it went to get everything installed. Now, after a week or so I have started having a couple glitches. When I go to install a new program or update it the program just sits there for 4 or 5 minutes before doing anything and then finally starts to do its thing. The other issue is that I am trying to do a backup and image clone to get my new system backed up. The problem there is that the windows backup won't see my hard drives. I then tried Norton Ghost and the same thing happened. What is causing this?
View 13 Replies
View Related
Jun 17, 2012
So i just built a new rig i got everything hooked up and i installed windows 7 ultimate x64. Here are the details.
Intel i7-3820 3.6ghz
Asrock X79 Extreme9
RAM G Skill 4x4gb ddr3
EVGA geforce gtx 680 2gb
Corsair HX 850
rosewill rnx-n250pce wireless network adapter
I got all the motherboard drivers and the video drivers installed then when i installed the drivers for my wireless network card and restarted and it froze on the starting windows screen.
I've been trying everything i can think of to fix this. I pulled the extra memory out, switched the power supply with one from another rig, switched the hard drive out for another one that i had.
after that, since it was a fresh build and nothing was saved on it i tried to reformat the hard drive and re-install windows, but the install disc also freezes on the starting windows screen.
so now i can't get it boot normally, in safe mode, from the disc or from another hard drive. when i try and boot in safe mode it stops at ClassPNP.sys
View 2 Replies
View Related
Feb 23, 2012
Alright I am running Windows 7 ultimate x64 on my newly built computer. My computer can successfully boot past the bios and get to the logo screen. Then I get to the Windows logo which is a hit or miss. Sometimes it will boot successfully and I will have no problems whatsoever and I can enjoy my computer without worrying about anything. Then sometimes it will get hung on the logo and it will just stop responding. I don't know if this is an issue with my HDD or maybe my power supply. I think that this may be a problem with my power supply because I notice that my keyboard LED turns of when it hangs like that. The only question then is "why is this not a consistent problem that I can isolate?"
Here are my specs:
Case: Coolermaster HAF 922
CPU: Core i7 3930k (3.2 ghz stock; will OC to 4)
Motherboard: x79 Asrock Extreme 4 (x5 sata 6.0 Gb, x2 usb 3.0 ports, PCI-e 3.0 support, and quad-channel memory)
RAM: 8 gigs (2x4 gig's) of 1600 DDR3
GPU: x1 Radeon 6870
PSU: 600 Watts
HDD: 500 gig's 7200 RPM (Seagate baracuda)
Cooling: closed loop liquid cooling, Tuniq TX-2 High Performance Thermal Compound, and the standard fans on the case
Optical drive: LG 12x Blu-Ray reader and DVD combo drive
Monitor: 22" LED 1920x1080 -- ASUS VS228H-P (21.5 viewable)
View 8 Replies
View Related
Jan 8, 2013
I'm trying to install Windows 7 64 bit on a newly built PC; All pieces are brand new. While trying to install Win 7, I get past a couple of screens then I get stuck at a "Select the driver to be installed." screen. Whenever I click on any of the drives showing up I get an error message that says Load Driver "No signed device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK."
I have the bios set to boot from CD/ROM first, Hard disk second, and USB third. The bios reads the hard drive as the correct 1 TB that it is. The "OnChip SATA Type is [Native IDE]." I have checked and double checked that things are plugged in correctly, but do tell me if its still possible I did something wrong. I have also tried booting with a copy of Windows XP that I had laying around but that gave me an error about "unable to partition drive."
View 25 Replies
View Related
Apr 8, 2011
I've recently built my a Windows 7 desktop and i'm getting all kinds of blue screens.I have tried doing a clean install, i've done a system restore since then to when it was working best and i've still had BSOD.Originally it kept BSOD when i had two sticks of RAM in (at least once every 30 min) and worked fine when only one was in. I've since done a clean install and have both in.I've attached the dmp files from the two BSOD i've had since i have done the clean install.The only programs installed are Avast! 6.0.1000) and the software to run the wireless dongle (Netgear WG111v3) plus whatever came with Windows 7.I've ran dskchk and sfc /scannow with no errors reported. I've ran memtest86 and that returned no errors (though only ran once)The motherboard has MemtestOK! and that shows no errors.Motherboard: Asus M4A88T-V EVO USB3 (the latest drivers for the chipset, audio, graphics, lan and usb3 from the amd website have been installed)THe drivers for the wireless mouse and keyboard are install as is for the wireless dongle.The BIOS is the latest chipset as well.
Processor: AMD Athlon(tm) II X4 640 Processor 3.00GHz
4gb of RAM
Windows 7 Ultimate x64
View 12 Replies
View Related
Aug 20, 2011
I have been getting a BSOD after i have built my new computer. I have just enable a minidump and it happened this morning. I am uploading it by any chance
View 9 Replies
View Related
Jul 5, 2011
i built this computer on june 23rd, had zero issues. i oc'd it to 4.5ghz on the 25th, have been playing crysis 1, and nfs undercover with no issues. i've run both at the same time while running prime95, and having core temp up, averaging 53c.
[code]...
listed above is all of my components.the crash happened while i was transferring files from my slave drive to my external drive.my cousin was using the computer, watching a video on Internet.the dump file is attached to this thread, i'd analyze it myself, but i haven't the slightest clue how.the bsod error said: stop 0x00000124
View 4 Replies
View Related
Jul 9, 2012
I recently built a computer and am getting BSOD's on a relatively frequent basis. After checking around I have no idea what the problem could be. This is the first build I have ever done. Here is what I know: Using WhoCrashed, it tells me that in 5/6 crashes it was related to ntoskrnl.exe, and in the 6th is was related to ntkrnlmp.exe,The BSOD's are not recurring, that is I will get one, then go back and do the same thing I was doing before, and it will be fine.
View 5 Replies
View Related
May 7, 2011
When I first bought my laptop installed with Windows 7 Home Premium 64 Bit, the built in webcam was appearing in 'computer' but when I installed Windows 7 Ultimate 64 Bit, it disappeared from 'computer'. My laptop is an Acer Aspire 5552 and my older sister also has an Acer laptop with a built in webcam and also not appearing in 'computer' and I think she is still using the default installed operating system because hers is Windows 7 Home Premium 64 Bit And I don't think she would choose to just format and install the same exact OS right out of the box...I called Acer tech support and they say they can fix the problem remotely but for a fee of almost 100$ which I dont have.
by the way it dont actually really matter if it works or not because I have my laptop connected to a 52" 120 hz full hd lcd hdtv via hdmi cord so the laptop is closed and upside down with the battery taken out ...on my fireplace mantel...all i use it for is to download 1080p bluray rips and watch 1080p bluray rips via 2tb external harddrive
And the driver for the built in webcam does show up in device manager without any problems there and it is also up to date
View 1 Replies
View Related
Aug 5, 2011
Ive never built a computer before but plan on giving it a try. I think Ill be able to handle the mechanical part OK, but the setup part I'm not 100% clear on. Not sure about setting up the eif bios.
View 9 Replies
View Related
Apr 30, 2012
My computer is not recognizing my built in web cam I have searched forums and even called the company and they said I should download a bison driver but I can't find one for windows 7 64bit.
View 2 Replies
View Related
Aug 2, 2012
So I recently custom built a computer and installed windows 7 Home Premium with a Dell OEM disc that came with my laptop and tried using my dell laptop's activation code. It doesn't work and I don't understand why. I used a dell CD and the dell code and it still doesn't activate?
View 7 Replies
View Related
Jul 30, 2012
I built a new computer recently; and I seem to get these errors mostly when playing games but sometimes even in computer boot/bios loading. [URL] Ive updated video and motherboard drivers.
But it seems the newer Nvidia drivers cause the problem more frequently.
My pc specs are : Code: OS:7-64bit
CPU:i7 3770k
Motherboard:Gigabyte GA-Z68X-UD3H-B3
Memory:2x4GB Corsair Vengence
Graphics Card:EVGA 670GTX
Monitor :27" Samsung LED
Hard Drives:128GB SSD, 1TB Seagate
PSU:750W Corsair
View 4 Replies
View Related
Mar 4, 2012
I just set up a new computer and built in the old harddrive from a Windows XP machine. The new computer is running Windows 7 Professional 64bit SP1 (German). I can access my XP Harddrive (NTFS) but when I try to open some files (Word Documents, PDFs), i am running into problems that Windows 7 is telling me that I don't have enough rights to open that file."The document can not be opened: The user has no rights"I have read about this problem and I know that it is a problem of the user rights. The XP user that created those files is now with the new Windows 7 computer not available anymore which is causing some problems. I have to take over the rights of these files again and I am severely struggeling. I have about 1000 files in several subfolders.
View 4 Replies
View Related
Dec 30, 2011
i have recently built a computer and i am experiencing frequent freeze-ups and bsod events with it. none of my previously built rigs have experienced this, and the most recent computer used several of the components currently in use, including the ssd, graphics card, case/ps, cpu cooler, and windows 7. [code] all of this has been assembled recently, though many of the components (listed above) have been in service for some time.nothing is overclocked.i have experienced more freeze ups than bsod. these have come at all different conditions, including web-browsing, watching video (both wm player and online Internet), downloading files while computer is unattended (i return and find computer unresponsive) and occasionally while gaming (mostly ms flight sim x). i have not determined a pattern.cooling is very good in the case, and the asrock board fan controllers maintain the cpu reported temp below 45c at idle and i have not seen the core temp above 60c in any situation other than a run of the program 'core damage'. i followed the directions for how to assemble a help thread for this forum, but i have not looked up any error codes yet (have not ever needed to with windows 7) so i will look into that in parallel.
View 7 Replies
View Related
Mar 17, 2012
I just built a new computer and whenever I play the game CoD:mw3 my computer randomly crashes, sometimes it'll show pale blue on my screen sometimes it'll be yellow and there really is no specific timing for it either. I've already upgraded my drivers.
Computer specs:
Asus p8z68-v/gen3 (motherboard)
Intel i5 2500k quad core 4cpu 3.3ghz(cpu) EVGA 012-P3-2066-KR GeForce GTX 560 Ti (Fermi) 448 Cores FTW 1280MB 320-bit GDDR5 PCI Express 2.0 x16 HDCP (gpu)
8gb RAM
500gb HDD
700W PSU
View 8 Replies
View Related
Jun 13, 2012
So I built a new computer yesterday and when I ran a speed test today I was only getting 9.5mbps when I usually get over 30mbps. It has something to do with this computer since my other computer is getting 30mbps. And yes this computer is connected directly through and ethernet cable.
View 2 Replies
View Related
