I accidentally installed 32 bit windows 7 on my pc earlier today. As such, I've been trying to do a clean install of the 64 bit from the windows 7 OEM disk.I seem to be running into a problem though, once the computer boots from the Windows 7 disk nothing happens. I get the load bar for "windows is verifying files" (not sure if that's what it is exactly, but it's something like that.)After the load is done, the generic startup/shutdown screen for Windows 7 shows up, the pointer switches over to show me it's busy for about 3 seconds, then nothing else happens. I tried waiting ~10 minutes and still, nothing happens.
DVD drive {D:} stopped showing in menu. Deleted upper & lower from registry as suggested. Rebooted, etc. etc. Did a system recovery back to when it did work - still N/G.
I'm just migrating over to Windows 7, and am having a hard time with the start menu. I've downloaded Classic Shell so the menu looks like XP again, but I noticed that when I look at 'all programs' some of my programs aren't there. Turns out Windows 7 has two program folders, apparently one is for purely 64-bit programs and the other for ones that still use 32-bit. Does anyone know how I can get both of these folders to show up in the start menu, preferably combined? At the moment, I can only find the 64-bit folder, and can't find the 32-bit folder in the start menu at all.
I would like to know if is possible to show All Programs in the start menu automatically when you click the orb. Because clicking every time to show the list of All Programs is not very nice since I don't use the recently programs open function.
for some reason when I go to start menu properties, and customize, the Music shortcut is ticked to be displayed as link but it's not showing up. Anyone have any ideas what could be causing this?
A while back I used a few different programs to tweak Windows 7. One of the programs I used caused the recently used programs to stop showing up in the star menu. Under properties now I can't even set the number of programs to show because it is grayed out and unselectable. Any body know how to get this function back? I have ran SFC to see if there was something corrupt in Windows 7 with no errors returned. I think there is something turned off in the registry but have no idea where to look.
Seen several different posts about this issue but really no definitive answer as to why is occurring. Never happened with XP or Vista only Windows 7. Seems most users with this issue report having a Dell computer but mine is a Toshiba Satellite L505. I just find it very annoying to have approximately half inch of desktop space visible on top of any type maximized window, browser window, explorer window, whatever.
Last night I installed Windows 7 (x64) on a separate partition.
Anytime I had tried this in the past, using Vista, it always detected the Windows XP partition, and gave me a boot menu with "Earlier Version of Windows" option to boot to.
This is not so with Windows 7.
How can I get the boot menu to show both options, to boot to XP or to Windows 7?
Okay I'm SO close to having this fixed now... Long story short, my SSD got corrupted so I reformatted it and now I'm trying to reinstall windows on it. So I reformatted the SSD and it shows up fine now in disk management and My Computer, but when I go to install windows on it, it won't show up in the Install Windows screen. I went into disk management and made sure it showed up as "Active, primary partition" which was fine. But it still doesn't show up as an install option? I hate being this close and not being able to just install windows now. I already tried running it in AHCI and RAID and nothing works.
I am trying to overwrite Win7 32-bit with Win7 64-bit. When I run Win7 install it does not find my two HDDs (they are RAID-1). When I look in my Device Manager (before starting the install process) under "Disk Drives" it only shows "GRAID SCSI disk device" and some other drives that are not hard drives. It does not show two HDDs. The BIOS shows both drives and shows a GRAID-1 configuration. I am not sure what to do next to get Win7 to either find the HDDs to write the new Win7 to or do something with the "GRAID SCSI disk device." I bought this machine like this and am not familiar with how to set these things up: I am not an expert.
I had installed windows 7 32 bit and it had compatibility issue with my Thomson Speedtouch since it doesnt have windows 7 driver I found a tweaked one online and was using it and it worked fine. Suddenly it stopped working and I formatted and reinstalled windows 7 but I was not able to connect the net. The message is always no valid IP configuration. I tried even with a router but the message is the same. So I installed XP on the other partition and I have no problem connecting to the net. Now I want to format the other partition and reinstall windows 7 but I am not able to format the partition from XP or with the installation CD for windows 7.With XP the format fails and with the installation DVD it always goes into BSD.What to do? On startup the previous installation of windows 7 doesnt even show up and goes directly into XP?!
Long before I bought Windows 7 I was running XP on a dual boot with Ubuntu, I then removed Ubuntu from computer but was still left with the boot option which I successfully removed. I then installed Win 7 as a dual boot with XP and once I was happy with 7 decided to remove XP just leaving 7. As soon as I did so for some reason the Ubuntu option returned to my boot menu. I have tried lots to remove this option but to no avail. The option does not appear on easybcd but seems to be a remnant of XP left in the now useless boot.ini file. I am able to access the boot.ini file using "run" but when I try to edit the Ubuntu option out access is denied. I know I have to change permissions to edit this file but have no idea of it's location and a search returns no results.
Basically I'm trying to do an install on a partition.
1. I tried using a DVD to install Windows 7 and it would go through "Windows is Loading Files" and then the "Starting Windows" icon appears.
2. After that the install menu is suppose to show, instead the background appears along with the mouse but the menu doesn't.
3. I thought maybe it was a problem with the file or disc. So I tried using another file of Windows 7, and I tried using another disc but still stuck at the same spot.
4. Next I tried to install off a flash drive and still same thing happens, the install menu won't appear.
I'm not sure if it's called install menu but basically it's the screen where you select "install now"
so i custom/clean installed windows 7 ultimate from usb, formatted through the windows installer, and deleted all pervious partitions. i then installed windows.windows created two partitiions one primary and one "for backup drivers" a total of 100mb. for some reason though it still shows me all my previous programs?like microsoft office 2007, wich actually is disabling my office 2010.hat i want to do is totally clear the hard drive so that i really only have windows 7 ultimate on it. similiar i guess to task 29ing my old htc touch pro
After a new (clean) install of Windows 7, the start menu is empty - all installed programs and other items usually posted by the installer are missing. Is there a fix (not a workaround) for this problem? There have been a lot of postings for this issue over time throughout the Internet, but I cannot find a real fix (like a patch from Microsoft) for this problem. When I install Windows 7 with a newer release of Windows 7, the start menu is populated as expected, so I can only infer that Microsoft knew about and fixed the problem in later releases, but did not post a fix. Unfortunately, I have a couple of systems that have recently been built with an earlier release of Windows 7, and subsequently, have the problem.
I did a clean install of Windows 7 Ultimate onto my Vista Ultimate Boot Camp Partition (on my MacBook Pro), rather than an upgrade install.
Windows 7 told me that it would move Vista to a folder called Windows.old or something like that.
Fine. After everything was installed, I used Disk Cleanup to delete that folder, and the space was recovered on my partition
But when booting into Windows 7, I get a boot menu that seems to indicate Vista is still there.
So my question is, can I simply delete Entry 2? Or is there other remaining stuff from Vista still on my drive somewhere that I should also delete? What is the drive "Active Boot Partition"?
I wish Windows 7 gave an option to do a clean install WITHOUT keeping the old system around...The whole point of doing the clean install was to get rid of all the accumulated junk and start fresh.
I'm putting together a slide show of 3D images that I want to show on my TV next week when we have company.I would like the images to stay on the screen a little longer without having to actually create a slide show in some special application like Premiere. The Slide Show function in Explorer works great if I can control the timing.
my brother's hdd in his laptop was going bad, it kept failing to boot. so i replaced it with another one. when i turned the laptop back on it started installing all the drivers for his hardware (windows was already installed on the 2nd hdd) and prompted me to reboot. after i did windows failed to start several times. i re-installed windows from scratch, and now his graphics card isn't showing up in device manager and windows cant find a driver for the network or ethernet card.
his specs: gateway windows 7 professional x64 ati mobility radeon hd 4250 broadcom bcm943225hm (network card) amd phenom II x4 n9790 4gb ddr3
Did a fresh install of Win 7 Ultimate 32 bit on new SSD (old computer) and having slow operation issues and have had these two BSOD. Computer boots up and shuts down quick and also downloads programs, and such fast, but navigating through menus or browser windows - ultra slow.
So im having issues with my PNY 8gb Flash drive that im trying to use to install 7 onto my desktop. The problem is that whenever I insert it into my computer and try and boot off it, (Clean install btw) even though the bios menus detect the drive when I boot it acts as though it didnt insert. I need my desktop.
just completed a first-time new Windows 7 PC build. Successful installation of Windows 7 Pro on WD 600GB 10000 system drive. Went back and installed 4 additional HDD. (2) WD Caviar Black 1TB 7200 RPM and (2) WD Caviar 7200 500GB HDD from XP system that were used for storage.
BIOS sees all HDDs, but are not viewable in Disk Management. System Specs: Antec Nine Hundred ASUS P6X58D-E MOBO
[Code].....
However, only three are visible in Disk Management. Missing (1) WD 500GB (previously used on WinXP system) and (1) new WD 1T.
I know that the full version can be achieved while holding the shift key, but is there way to bypass that and have the regular full sized menu by default?
ihave windows 8 my lpatop is acer aspire E1-531, I am trying to install windows 7 but boot manager wont show me dvd boot !! it show me only network boot what can i do to be able to boot from dvd
I was using my desktop like normal then an error came up saying that there was a hdd failure, and that i needed to scan for errors. all my files disappeared and only this error would come up. There would be hundreds of the same msg spamed on my screen. I scaned my hdd for errors using my Bios/Advanced options and no errors came up. I decided to take out the hdd and put it into my External Hdd bay to hook up to my laptop to extract the data off it.When i hooked it up to my laptop it showed up empty. I went into folder options and clicked on show hidden files and folders. Everything came up but it was grey/transparent. I then copied the files to another hdd for backup.
Then i formatted the hdd and put on a fresh new OS. Id like to mention i have a second internal drive that i use for backups but it wasnt backed up recently when this issue happen so i had to take out the main drive and use it as an external to back up onto another external drive.so then when i click on my second internal drive after the reinstall of the new OS it shows empty i have to go in and show hidden files and folders.. now they show again transparent. also i plug in my external to get the recent back up and all those files are still transparent when i move them to my desktop that is freshly OS installed they are still grey/transparent and i have to keep the show hidden files and folders to view them.. so its all my music, pics, documents etc they are all greyed out..i tried to copy my backup IE favs into my new IE browser and they wont show up because they are hiden it shows it copied to the favs folder but in ie i cannot view them if that makes any sense.
