Hp Laptop And Hard Drives Failing?
Feb 8, 2013
I recieved a HP G62 340US about a year ago. A couple months back, around christmas, the computer stopped booting. It hung at the windows 7 starting screen. I ran a test and the long dst failed. I bought a new seagate 500Gb hard drive and reinstalled windows 7 (from the recovery disks that I had to buy). My computer has been working fine since about a week ago. When I opened Firefox or wordpad, I would get a BSOD. I found out it was a problem with my fonts folder. If I try to open the fonts folder, I get another BSOD. Then today I opened Photoshop and another BSOD. When my computer restarted, It said hard drive failure is immenent, then I preformed hard drive diagnostics. SMART passed, short dst passed, and long dst failed. Last week when I preformed the test, everything passed. I am worried that my hard drive will die again soon. Could it be that the hard drive is corrupted where the font folder is?
Failure ID:QC7VBS-5LI6H6-XXD0141-61DJ03
Product ID:XH066UA#ABA
COMPUTER:
Windows 7 64 Bit Home
8 GB upgraded ram
My hdd is:
Seagate Momentus Thin ST500LT012 500GB 5400 RPM 2.5"
Should I include the dump for the bsod as well?
View 1 Replies
ADVERTISEMENT
Mar 30, 2011
I have a failing hard drive on my laptop, when i proceed to buy a new one, what do i need to do to get windows 7 onto the new hard drive? can i do that with system restore or back up software?
View 2 Replies
View Related
May 30, 2009
Being a laptop owner i was not happy to read this SSD laptop drives ‘slower than hard disks’
But are 40% more expensive
Solid-state drives (SSDs) are becoming a more frequent storage component in laptops, and are promoted as being faster and more energy-efficient than traditional spinning hard drives. But tests prove that such drives are actually slower than standard laptop hard disks.
View 5 Replies
View Related
Feb 9, 2010
I want to put my old hard drive that has files and was used with windows vista and put it into a new windows 7 laptop. Is there any overlap or any config problems I can run into doing this? Or do I just put it in and the old files should work and all i have to do is update some drivers from vista to 7?
View 2 Replies
View Related
Aug 8, 2012
in the past i had a seperate personal hd for my work laptop I would take my work HD out then install my personal drive in and it worked great. But now on new laptop there is a biosandhard drive can I still switch hard drives or will it not work or will my work know I swap. Them.
View 2 Replies
View Related
Sep 19, 2011
I have a toshiba hard drive in my laptop that Windows 7 says "Windows detected a hard disk problem." I've backed up my personal files, and now I'm trying to figure out if it can be repaired or if I'm going to have to buy a new hard drive. I tried to run the Toshiba hard drive diagnostic, but the tool isn't allowing me to select my drive and can't run without being able to do that, even though it is my only hard drive. I've checked for viruses and malware, and it says there are none. I've defraged as well
View 4 Replies
View Related
Oct 8, 2011
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies
View Related
Jan 28, 2012
I have a WDC WD5000BEVT-75A0RT0 Laptop hardisk ,and just in recent times it gave me an error from Windows 7 and when I boot my laptop saying that S.M.A.R.T found an error, and backup your data immediately the HDD is going to fail. Now I am quite a power user, and understand computer's quite well, but my laptop is just a year old (out of my warranty period), now how can this happen? I don't rough use my laptop at all, I didn't notice any hardware failure problems related to the HDD no clicking noises,I think its more to do with the software ? I ran a chkdsk and everything came out normal for my drive C: which is the WD drive.What do I do next?
View 3 Replies
View Related
Jul 16, 2011
I bought a refurbed Asus K50IJ-BBZ5 laptop this week.When I log into an administrator account after bootup, it will immediately give me a message about installing new device driver software, then in 20 seconds or so say that the install failed.The failure message specifically says"Device Driver software was not successfully installed.First, my ethernet works fine. I've plugged the laptop into a router and gotten to the internet, lost connection upon unplugging (i.e., it's not a wireless signal that is connecting me), reconnected upon plugging back in. Furthermore, when I have wireless enabled and am not plugged in by ethernet, I connect to the internet fine as well.So my wired and wireless internet access is fine.Third, it shows that specific network adapter working fine. Fourth, when I do try to update the device driver software using the device manager, it tells me that my driver is up to date.So my issue isn't so much with the network adapter/ethernet, since they do what I want them to. My issue is how do I stop the computer from pushing this driver at me?And I have cleaned the computer of most ASUS bloatware, and used msconfig to find what's running at startup, and there's nothing running that I see that is pushing this on me.
View 3 Replies
View Related
Apr 11, 2012
I am trying to install Windows7 as I did earlier but now I m getting an error "Cant install on this disk Pls use another"...Now how to check whether my hard drive has gone bad or any other issue.
View 1 Replies
View Related
Apr 6, 2011
i built me a gaming computer with windows 7, its up and running. I have a old Dell with Windows Xp that i have had for 5 years. I want to put that hard drive in my new computer. is this possible? will there be any conflicts? I want to make it so maybe in bios i can select witch OS to boot up. Or maybe it defaults to Win7 and i can switch to WinXp whenever i wanted.
View 5 Replies
View Related
May 16, 2011
I've recently purchased a PC with 1 64GB SSD and 1TB HD. Contrary to instructions the seller uploaded everything onto the SSD at C: and not just the OS. He now says I should use a disk partitioner to transfer the files. Also to reset my BIOS.
View 5 Replies
View Related
Dec 16, 2009
I currently have a dual boot of Windows Vista Ultimate on one hard drive and Windows 7 RC1 on the other and was planning on
upgrading to Windows 7 ultimate. I have could either upgrade my Vista hard drive which would be easy or I could upgrade the release candidate Windows 7 which is a fresh install on a new drive. Which should I put Windows 7 on?
View 4 Replies
View Related
Feb 5, 2013
If I Format my Hard drives ,do I lose all my systems ,Like Windows???
View 4 Replies
View Related
Jun 3, 2011
I have two laptops that are identical...HP Compaq nw9440. I have a 100gig drive in LAPTOP#1, and a 750gig drive in LAPTOP#2. Both drives are running an identical Windows 7 Enterprise typical install. Can I put the 750gig drive in to LAPTOP#1? Can I create and save an NTBTLOG.txt file from each laptop (I.E. ntbtlog-LP1.txt) and select either one during the boot-up? The reason is LAPTOP#2 is not running very well. It has been dropped and I fear the motherboard may have a crack in it causing random boot problems. Sometimes the laptop doesn't even recognize the hard drive.
View 2 Replies
View Related
Jul 28, 2009
64installed on c, win 7 later installed an d. dual boot has been working perfectly until
something caused the drives to switch. now win 7 starts ok but looks for all it's files on c, which is locked.
vista starts up fine, and sees all it's files on c as it should.
my windows 7 repair disk, created at start of win 7, does not correct problem, nor does system restore.
View 9 Replies
View Related
Dec 23, 2009
After upgrading, I've found that I have 7 IDE hard drives ranging in size from 1 GB (!!!) to 200 GB. I'd like to get rid of them all. Is there a free reliable recylcing service out there. I've already wiped them clean (except for the 1 GB drive which won't spin up. It's from 1994).
View 7 Replies
View Related
Nov 7, 2011
Just added this to my computer Safely Remove Hardware Shortcut - Create
and when I try and eject using the right click on the desktop I get
Problem Ejecting XXXXXx USB Device
The 'XXXXXXXXX' device is not removable and cannot be ejected or unplugged
This is when I try any combination of clicking stop on the drive name and drive letter in the window.
View 4 Replies
View Related
Jul 10, 2012
I can only run one at a time instead of two. I would like to copy my 1.5tb over to my 2tb so I have a back up.
My laptop only holds 200GB of remaining data so I can't use that hard drive or I would.
View 7 Replies
View Related
Jul 31, 2012
This morning my pc started acting up for some unknown reason. After numberous attempts to fix it, I decided to restore from a restore point. It said it did restore but things got even worse.I then decided to restore an Maxium Reflect image I had made a couple weeks ago. When I made the image, the pc was working fine. The restoring of the image went normally.I have two strange things occurring.
1. I have two hard drives with 3 partitions on each drive. After about 10 minutes I can NOT see second hard drive in either windows explorer or Disk Managaer.
2. When the pc is first booted and a few minutes pass, I get what sounds like a radio station playing. It only lasts for about 20-30 seconds then goes off. It comes back randoms times. I have checked the processes that are running and nothing stands out that would cause this.I built this PC in 2009 and the combination of these identical hard drives (1 TB Sata) have always acted strange at times. Example the second hard drive would NOT always boot when windows booted. This was usually fixed by just rebooting.I have checked and all fans are working normally and inside the case is relatively clean.Is there any software that can be used to check hard drives???
View 4 Replies
View Related
Oct 5, 2010
I blow away a computer so I'm taking the Hard Drive out and putting it into another computer. From a AMD 3000 to a AMD 3800 and all it does in re-boot. I put in the XP CD and tried to do a repair but it didn't work or I didn't do it right.
View 3 Replies
View Related
Oct 21, 2009
I have a slight issue that I'm not sure how to fix. It's nothing serious but it's something I'd like to take care of.
Basically, I bought a new hard drive, made it the primary drive, and kept the old one in so I could transfer everything over to the new one and keep the old as my backup drive.
I installed Windows 7 but when I boot my machine without the disc in the drive it wont boot. I made my old drive the primary one again and I discovered that when I installed Windows 7 it put the boot information on the old hard drive instead of the new one.
Basically, I'm looking for an easy way to get it to boot from the new hard drive without having to use the old one as the primary. Any ideas?
View 2 Replies
View Related
Feb 4, 2010
I have a laptop that came with Windows 7 home premium and one hard drive. I purchased a second hard drive and installed. Is there anyway to set this up, even if it means wiping everything and reinstalling, so that both hard drives are seen as one C drive? My laptop does not have a RAID option in the BIOS. What about if it was Windows 7 professional?
View 9 Replies
View Related
Dec 15, 2009
If you think that switching to the high performance power plan is enough to set your computer to the best plan, well, it isnt.
Heres how to set your hard drives so they are included in the high performance:
1. open control panel
2. type power in the search bar and click "change power-saving settings"
3. to the right of the plan name click "change plan settings"
4. Click "change advanced power settings"
5. Go to the hard disk section and then "turn off hard disk after"
6. Enter 0 (zero) in the box (this will change to never)
Doing this prevents your disks from being "turned off".
View 7 Replies
View Related
Dec 24, 2009
As my hard disk, I have a 1TB Western Digital Caviar Black Edition.. it's 7200RPM, 32MB cache. Yet, WEI only gives it a score of 5.9. Everything else on my PC is a 7.0 or above.. any reason for that?
View 9 Replies
View Related
Apr 5, 2012
Can I install software/programs onto my external Hard drive and run them through my laptop as normal?
I have lots and lots of adobe products and heaps of music and movie editing software. I dont use them everyday but play around often.
View 4 Replies
View Related
Nov 1, 2009
i can't see the hard drives in my computer
View 5 Replies
View Related
Jan 21, 2012
why does Toshiba have a C AND D hard drives. Other computers I have had only have 1 C hard drive
View 2 Replies
View Related
Jan 29, 2012
Can we install same OS in different hard drives?
View 2 Replies
View Related
Jan 20, 2010
Any trick on how to get windows7 to keep seeing your slave drives?
I have tried un-sleeping, increased time to 999min. All drives have drive letters & are listed as active and healthy etc. Each have mix of ide but mostly sata drives. Windows have been updated.
I have a small office with 8 computers trying to run Windows 7 now. All fresh installs onto new sata drives @ 2 weeks now. (The old xp drives was just turned off awaiting reformat). Everyone is starting to have the same problem with drives that disappears. On some of the computers it happens as quickly as in 5 min, sometimes right as you moving one file on one drive over to another drive. Nothing but rebooting all day.
Any clues?
View 2 Replies
View Related
Sep 1, 2012
I have Win 7 desktop with 2 hard drives. One small SSD I use for work only and it only contains few work-related programs. The second larger HDD has a cloned bootable copy of SSD (in case of failure of SSD I would be able to continue working) but also has other non-work related stuff (pictures, videos, games....).
I was wondering how to set up the system so that I get a choice of which drive to boot from every time I turn on the system. That way I could choose which drive to access depending on whether I need to work or play.
View 5 Replies
View Related
