following code cant open all process also gives error in InjectLibrarry() why?
void main()
{
HANDLE hProcess;
DWORD procID[1024];
DWORD noOfProcs;
DWORD szretrn;
int i=0,j=1;
LPTSTR procName;
[code]....
i will be building a new PC soon and I want to use my old HD in the new PC which has Win 7 32bit installed and working fine. The new PC is a 64 bit machine so I will need to move to the 64bit version of Win 7 which came with the 32bit on another dvd.So my question is, What do I need to know before I start the process of going to 64bit Win 7?
View 5 Replies View RelatedThis tutorial will show you how to open a folder as a new process in Windows 7.
View 0 Replies View RelatedI have a system I have used for a while now and I actually reformatted a few months ago. The system has been working great with no problems but recently during a boot up I noticed an issue. Right when Windows begins its setup to take you to the login screen I noticed a bluescreen and a quick reboot. So I used F8 to boot from the last known good config, no change. I went and disabled the automatic reboot after a crash so I could read the error and it's the:
"Process1_initialization_failed" error.
I looked around for that error and found this: Fix: STOP 0x0000006B PROCESS1_INITIALIZATION_FAILED Blue Screen | The Windows Club
However, when I tried to get into the C: to remove that file, it said "Access Denied" and locked me out. I have yet to be able to get into the system since. To make matters worse I gave up and decided to just reformat the drive and start fresh. However, when I load up my Windows Installation DVD it is noticeably slow, it takes 5-10 minutes to go from step to step. So I got to the "Install" button screen, clicked it and it says "Setup is starting..." and then...nothing. It just stays on that screen for a long time, I gave it 30 minutes last night. So I'm unable to even reformat.
How to Open a Folder Window in a New Process in Windows 7 ?
View 0 Replies View RelatedWhen I try to open a process file location, it won't let me. Specifically, this is winlogon.exe. I'm afraid it might have a virus, since my internet is running pretty slow and I haven't seen this process stay on the task list for as long as it is now.
View 3 Replies View RelatedEverytime i shut down my laptop or restart i get a screen force shutdown there are open backgroundprocesses. But the screen dont show which program is open. Its empty..It shuts down immediately. I must remind you that i used quite allot ccleaner to clean up the registry.
View 2 Replies View RelatedEverything was running fine, and all of a sudden I can not open .exe files unless i run them as an administrator. When I try to run them, the cursor does its 'loading' thing and then nothing open on the screen. I check processes under task manager and the program is open, but is not on my taskbar, or open anywhere on my screen. This is happening to about 90% of my programs.This is the second time I have had this problem. I had it before, and I did a clean re-install of windows 7 64-bit, and it happened again.I have tried multiple fixes, and nothing has worked so far. The driver for my Asus Xonar D2X sound card is what looks to be the culprit. I have no idea why and now I have to find a way to install the driver so I can use my card without this happening again.
View 9 Replies View RelatedI recently installed new software that requires port 8080 to function. When I try to run the software I get an error that port 8080 is being used.How do I check to see what process is using port 8080 so that I can open up the port to run the software? MACHINE: Windows 7x64
View 9 Replies View Relatedwhen I open PDF file in Fx (open in new tab), I can scroll only that PDF file, however if I change focus to other tabs it doesn't work (external mouse is not affected, only touchpad).Closing PDF tab restores scrolling ability.
View 1 Replies View RelatedI have tried EditPad Lite but it cannot open text files > 2GB.
View 2 Replies View RelatedI was away from my computer on saturday and when i returned it had restarted itself. I don't know if it installed updates or just crashed, i can't find any reccord of updates. Since then i can not open any 32 bit programs.
I can not install anything, when i try i get the error "The windows installer service could not be accessed. This can occur if the windows installer is not correctly installed. contact your support personel for assitance."
I also can not uninstall anyhing, i can inly access uninstall utility in safemode but it still will not let me uninstall anything i've tried running sfc/scannow several times along with chkdsk, both found nothing.
I did a system restore also with no change. Booting into safemode doesn't change anything.
I am getting this error all the time with Windows 7. I open a text file I want to edit, then go to save my changes and I get this error:"The process cannot access the file because it is being used by another process".I have full admin rights, running Win7 Ultimate x64 SP1. From a bit of research I have seen where many others have been experiencing this problem or something similar too. The only "fix" (that doesn't work all the time) is to close explorer.exe and then restart it to "release the handle"? Anyway, this is not acceptable for all the money and time I spent upgrading/configuring this new OS from XP -where I never had this problem- and seriously cuts down my productivity.Has Microsoft even acknowledged this as a bug yet? I can duplicate this scenario the second or third time I try to edit/save/delete a text file and I know that explorer.exe is the problem or a big part of it in any case. I don't want to go back to XP x64 but having to deal with this headache 10-20 times a day is just too much to ask.The file here is a game's map script & has to be saved to a .pk3 and then loaded into the program's root before it can run so i know othing else is running the file. No apps running in taskmngr either.
View 13 Replies View RelatedNew dell n7110/win7sp1x64.At startup on new machine from dell, process explorer (procexp64.exe) lists 81 processes running (seems like way too many - compared to xp with maybe 25 at startup). But which processes I can turn off is a question for another day. OK, read carefully, at least 15 processes in PE show " Path: error opening process". PID, CPU, Private Bytes, and working set columns are shown for these "problem" processes, but nothing after that, ie, description, company name etc. For all other listed running processes (with known paths), all info is shown in all columns. The problem processes include some important ones, services, crss, ism, wininit, winlogon, that must to be working for the computer to work, and everything seems to be working properly, and no cpu spikes or other weird stuff is happening. Right clicking properties on these problem processes, properties window pops up as normal, but shows "version: n/a, build: n/a, path: error opening process, no command line, no current directory, autostart location: n/a, Parent: non existent process (708), user: access denied. Again, this info can not be correct since the computer is working. And then, after a few minutes, another window pops up and says PE has stopped working, and closes the program. Now, if this was the whole story, I would go to sysinternals with this, but read on... Task manager running simultaneously with PE lists 83 processes running, more processes than PE, and also ~5 different processes than PE, and PE lists some processes running that TM doesn't list. So PE and TM show different running processes at the same time. How can that be? For the processes that PE shows "error opening", e.g., crss, etc., when I click properties in TM for the same process, sometimes I get the usual/normal pop-up window listing the path, and all the other data as normal, suggesting the process is working properly. But sometimes when I click properties in TM for the processes that PE shows "error opening", I get no pop-up at all, nothing for that process. So, IMO, it's not just a PE glitch, something is actually wrong here. This is a new machine, with PE the only 3rd party installation. I have installed several dell driver updates, but this problem occurred before I installed them. Also, remember PE and TM simultaneously list some different running processes and TM also fails to show paths, etc.
View 3 Replies View RelatedFirst things first. Brand new discovery! Did you know that it's impossible not to backing-up and lose your old files during Windows 7 installation? That's right! Microsoft contradicting it-self in the first steps of installation preparation step by step information. At first they say that we should back-up our old files as they WILL BE deleted. Then they practically force an option of where our old Windows files will be backed up into Windows.old folder. So the folders such as "Users, Program Files, Windows ...etc" will be stored in Windows.old folder. And any other files created by you that are stored in "C:" directory will remain untouched! So don't worry about upgrading or backing up anything, since Windows 7 does it all for you! My advice, just go with a clean install and you'll be safer that way. Now back to business. Have you ever experienced a really bad day with such as Windows 7?Possible solutions for your headache have finally arrived:We need to try almost everything possible in our powers to locate and solve the problems, right?NOTE: I'm gonna do these steps backwards like if we don't really know how to solve this quick!
[code]...
Windows Mobile Device Center doesn't work with Outlook 2010 if installed as 64 bit. Microsoft says to "fix" this by uninstalling Office 2010 and installing the 32 bit version!My question is are there any 3rd-party sync programs that will work with Windows 7 64 bit and Microsoft Office Outlook 64 bit and Windows Mobile 6.5 devices? I don't need to sync email but I do need to sync calendar, contacts, and tasks. And yes, I am aware that the iphone will sync with it! Silly Microsoft. I have 1.5 years left on my mobile contract with my Windows Mobile 6.5 phone?
View 6 Replies View RelatedCan I boot Windows 7 64bit on a 32bit processor if the Windows installation took place on a 64bit processor?
View 10 Replies View RelatedI have just gotten a job working on the internet and am trying to get updates done...Can I fix somehow all of the failed updates in one process? I really need to keep the window open to see who needs what on my work. I just need to know too, why all the failed updates, I am just estimating but am sure there are more than 7 of them. I want to get to work asap...
View 14 Replies View Relatedim running win7 64bit and have noticed that host process for windows services is sucking up 30mbs upload and 30 mbs download per day . i have checked and my system is clean . i just wondered if there was anything i can do to stop them using so much data . in just 3 months its used over a 1 gig which is to much.
View 5 Replies View RelatedI have Windows 7 32 bit on my laptop and Windows 7 64 bit on the desktop, both Home Premium. Every time I go online with the desktop it starts a download according to NetLimiter. The download appears as Host process for Windows services and it expands to process 720 and then to 92.122.126.243:80. I use 3G mobile broadband for my net access and this download could use a considerable amount of my Gb allowance. Using NetLimiter I can kill the download but I would like to know what is happening and do I need the download? Some idea of the d/l size would be handy as well. None of this happens when I log on using the laptop.
View 1 Replies View RelatedMy VB6.0 application process does not Exit under Win 7 but it exits properly on Win XP. After exiting the application process VB6 exe remains running in Task Manager. So every time I need to manually end that process. Is there any way to release all resources held by VB6.0 exe & VC++ dlls on Win 7 OS through VB6/C++ code.
View 5 Replies View RelatedI recently re-formatted my hard drive, and noticed an icon in the task bar called "windows host process (Rundll32)". I looked it up and it said it could be malicious. I'm not sure if it is or not, but I ran Malwarebytes and nothing came up.
View 14 Replies View Relatedi have a computer that was running fine for a year or so, but now its been a couple of days and after an hour or two of use, it slows down and finally freezes. I dont know what it is. The clues i have include:
-ive run memtest86, no errors.
-ive scanned the whole system with 4 different virus programs, so not a virus.
-but ive noticed that rundll32.exe has been using ALOT and i mean ALOT of resources. After a couple hours, norton tells me that it has high disk and cpu usage. i checked core temp and voila, 100% on all 4 amd phenom 955 cores. I dont get it.
Specs are:
Amd phenom 955 be
4 gb crucial 1333
ati 5450
1tb hitachi hdd
Windows 7 host process (rundll32)?
View 4 Replies View RelatedExplain windows 7 process and threads.
View 7 Replies View Relatedhow can I find what is the process that causes the last reboot on Windows 7.
View 1 Replies View RelatedI am using win7. I get the msg backup your files. I start the process and get goes to 25% and sits there for a short while then it goes to 50% and stays there over 10 hrs. I get no other msg or requests for a cd or anything. I have done this for a dozen or so attempts to back up with same results each time.
View 3 Replies View RelatedI can be in MS Word, After Effects, Surfing or ANY OTHER PROGRAM, and not click out, but be just working away and all the sudden SOMETHING (your part) causes my active window/program to go like it was a background process. could be in the middle of typing an email, and in the middle of a word and I can get half of it typed and then... BOOM! I'm out. The program DOES NOT close, it just acts like I clicked away to the desktop or another program.
Then I have to click back on my email and can resume typing for a bit. This happens every 5 minutes or so (haven't timed it). When it clicks itself out, it doesn't really go anywhere that I can tell, but something is definitely making my active window/program become inactive. I'm assuming it's some background process, but I don't see anything pop-up or blink or give me ANY indication at all that it has taken the active position.
I'm not sure how to even phrase this question since I don't know what is really going on. But it's driving me crazy in my video editing program (Premiere) especially since I'm in it about 15 hours a day. So it's happening, as you can imagine, 5-10 times an hour during my playack.
In fact, just at this very moment it did it again while writing here. My Chrome page became inactive and I had to reclick right here to continue writing.
I've had probably 50 computers since Windows 98 and I've never seen this before. And of course this has to happen on my big edit monster that I'm on all day. The system is a dual Xeon x5680, overclocked to 4.5Gzh, with 48 GB ram. I'm running on a EVGA SR-2 motherboard running the latest bios (as of 2 months ago). Runs like a beast in everything, very stable, just this annoying problem that keeps surfacing all the time. I'm running Win 7 Ult 64.
My PC goes through the BIOS stage and starts to load Windows 7, the GUI comes up and then it just stays there, goes into space with nothing happening. I have booted in Safe Mode and that works, but it won't boot into Safe with Command Prompt or Networking. I have tried the Repair my Computer option but that did not fix it. Then I did a System Restore but that did not fix it either. Not sure as to what to do next.
View 2 Replies View RelatedI have a Dell Inspiron 1440 Windows 7 Home Premium 64 Bit. This message on my computer keeps coming up in one window it says ost process for windows services has stopped workingWindows is collecting more information about the problem this might take several minutes. It's a gray bar, It never loads, another window is also open that says Do you want to send more information about the problem?I click on view details and this comes up, I copied and pasted this[CODE]I click send information, and it goes away and comes back a little while later. When I click cancel, or the x it goes away and comes back a little while later also.
View 3 Replies View Relatedchanging registries etc !!!bt nothing worked !
View 1 Replies View Related