How To Setup Asio4all In DAW Software
Oct 30, 2011
I'm trying to get sound output from either FL Studio, Reason, or Ableton Live to my headphones which are plugged into my Auzentech Bravura. I go into either software, click audio settings, then select ASIO4ALL as the Input/Output, click show ASIO panel. When I select Auzen X-Fi Bravura 7.1, the sub menu shows a red X on both Auzen X-Fi Bravura 7.1 S/PDIF-In as well as Auzen X-Fi Bravura 7.1 Headphone. If I hover over the X it has a > "In use by another application?" I have no idea what the problem is. The sound works fine running through my onboard sound with speakers.
View 1 Replies
ADVERTISEMENT
Dec 20, 2009
I am using ASIO4ALL with Traktor 3 so that I am able to get 2 channels out of my soundcard.What I mean is that I am using one channel for the speakers and another channel for my headphones.I need the headphones so as to listen to the "Cue" Deck.I have connected my speaker system to my soundcard with one cable.But I had figured out (when I used XP) that I was able to have what I want when the settings were 5.1 speaker system at realtek settings.Now I cannot listen to anything from Traktor 3 when using ASIO4ALL.What can I do?
View 2 Replies
View Related
Oct 5, 2011
one of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup.Now when I boot up the netbook, and it attempts to go through the initial windows setup "Setup is starting services", and then throws an error message: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation.I restart, and the cycle continues. This happens whether I try to boot normally or in safe modeI've got no CD-drive attached to it, so I'm not sure what I can do to break this error cycle.
View 6 Replies
View Related
Jan 16, 2009
When I try to install some programs and drivers i get error: 'Setup will only run in administrator mode. setup is aborting.'. I only have one account which has administrator rights. I have already tried to enable and disable UAC, booting in safe mode, run as administrator, enabling original administrator account, adding permissions, taking ownership, changing compability mode and other but nothig is solving my problem. I'm running windows 7 x64 build 7000.
View 4 Replies
View Related
Oct 28, 2009
I am trying to upgrade Vista to Windows7 Home Premium and I got this message after the installer copied ~2GB of files on my PC:
"setup can't continue. restart the computer and restart setup. when prompted try getting the latest updates."
I restarted the PC and restarted the setup and I got the same message. I updated the Mother Board Bios and restarted the setup I got the same message. I have tried both options (get update and no update during the setup). And it didn't work.
I do not want to do custom install (fresh install) on my computer.
View 1 Replies
View Related
Jun 20, 2011
I downloaded the HP Photosmart Premium Fax All-in-One Printer - C309a software package. Once it extracts it stops running. When I go to the folder and run the Setup.exe file I get the circle on the pointer which makes me believe it is trying to run but then nothing happens. There seem to be sevelar threads about this being a problem with Windows 7 / IE8 but none that I have found have a solution. Running Windows 7 Home Premium 64.
View 3 Replies
View Related
May 31, 2012
I'm starting to upgrade my PC piece by piece. I just upgraded my video card, and I'm getting an SSD to load my OS on. I'm going to upgrade from Windows XP 32 bit to Windows 7, but I'm unsure if my current system will support 64 bit or not.
- GIGABYTE GA-EP45-DS3L LGA 775 Intel P45 ATX Intel Motherboard
- Intel Core 2 Duo E8500 Wolfdale 3.16GHz LGA 775 65W Dual-Core Processor BX80570E8500
- G.SKILL PI Black 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 900(PC2 7200) Dual Channel Kit Desktop Memory Model F2-7200CL4D-4GBPI-B
- SAPPHIRE Radeon HD 7870 GHz Edition OC
- 1 TB 7200 Western Digital Caviar Black Sata HD
- Crucial M4 CT128M4SSD2 2.5" 128GB SATA III MLC
View 10 Replies
View Related
Jul 25, 2011
I'm trying to install Windows 7 on my notebook. It currently has Vista and the computer will not boot up at all. It will not let me go into safe mode, or even system recovery. The memory and hard drive are both fine (based on the tests.) Whenever it boots from the Windows 7 disc it goes to "Setup is starting." and just hangs there. I've let it sit for about 40 mins and I really doubt it needs more time. I've searched on this a little but none of the solutions seem to work.
View 4 Replies
View Related
Dec 20, 2011
I have been trying for about 8 hours to install my new win 7 on a new box.I only have a 500GB drive in it and a dvd. The rest is on the mobo.I have a usb mouse and usb kB plugged in.I started with the setup DVD and changed language and chose to install It go to expanding files okay and updates then rebooted back to where I was at the start.I have tried to Repair but just get nowhere. I am so confused now.I just redid it again and now get a blue sceen with multiple_irp_complete requests.I did notice that this time it had allocated a partition 1 to system so I had to choose part 2.
View 3 Replies
View Related
Dec 30, 2011
I saw anohter thread like this one, but it was stupid :P So I'm trying to install a computer game, and when i run Setup.exe, it says "Do you want the following program from an unknown publisher to make changes to this computer?" I click Yes, and thats it. It goes away and nothing happens. The hourglass shows up for a second and nothing happens.
View 1 Replies
View Related
Jul 30, 2010
I am new with windows 7 -previously used xp - how do I set up a backup to go to the cd? in xp it would go to a file and then tell you that you had files waiting to be burned. Any suugestions would be great
View 3 Replies
View Related
Dec 30, 2010
I have two SATA hard drives. I was poking around in the BIOS yesterday and noticed that they were setup IDE instead of AHCI. I am not sure what either does and did not want to change anything without asking. When I first got my PC, it had XP installed, so I am thinking that is why IDE is set. Do I need to change it to AHCI? I am not having any problems. Would it be of any great advantage to change it? I understand that after the OS is installed, it is a problem to switch to AHCI.
View 4 Replies
View Related
Dec 16, 2011
I recently bought my new computer, and it came with two RealSSD C300 256 GB. I want to set up raid 0 to have one drive with 512 GB. I really don't mind the performance boost, i just want to have one partition with 512 GB. I already have it on RAID mode, but whenever the Marvel screen appears, i already tried pressing CTRL M, CTRL R, CTRL I, Space, none of those seem to work.
I own the Maximus IV Extreme motherboard.
View 9 Replies
View Related
Jul 14, 2012
I bought a 2nd 580 3GB GPU fitted it in no probs, and apart from trying to figure out which DVI slot runs the display (for some reason it wasnt the original) - got SLi up and running. However the first thing I did was to benchmark it with the "Heaven" demo - it ran (with audio) and then spluttered and crashed.Since then I have no sound on the PC... apart from via the TVThe PC is hooked up to a hi-fi usually via line-out 3.5mm jack. Since the upgrade this wont work at all. Sound only comes via the option of the TV in audio settings. Ive disabled that, and saw "speakers" were not plugged in (when they were). After much tooing and froing I googled this and found it may be a Realtek setting. I enabled "front ports" via Realtex and the speaker icon re-appeared, I tested the unit - NO SOUND!! However the green "level" bars show up for both back panel and front panel but nothing is heard. Ive tried a different set of speakers, different cable and different OS but same issue.
Ive tried uninstalling the Nvidia drivers thinking it could be their HD Definition Audio driver, also went into Nvidia control panel and saw an option for the GPUs audio to be turned off - still nothing. Tried disabling onboard audio via BIOS - still nothing.Tested my hi-fi - works fine.Its my worry that something may have borked up on the motherboard (Rampage 4 Extreme)
View 1 Replies
View Related
Apr 13, 2011
Remember when you installed Windows 7, there was that one setup thing that asked you for the time, your username, and password?Ok so my friend wanted me to upgrade his HP laptop to Windows 7, since he originally had the you-know-is-junk version of windows (Vista).I was able to install all of the software, but what I want to know is if there's a way to run that configuration setup thing again.
View 1 Replies
View Related
Feb 1, 2012
I just ordered a Gigabyte Z68X-UD3H- B3 mobo.
If you were me would you add a 64GB SSD and setup this system for Smart Response Technology or would you add a 120GB SSD and install the OS on it?
View 2 Replies
View Related
Sep 13, 2009
So i just build my computer.....well upgraded from quad core 9550 to core i7 now with my old computer, i was thinking of making that a data server, and having my main rig just os and applications and having the serve on a 2 gig connection to the network does that seem feasible. I have 4 1tb hard drives i wanted to do them in a raid 5 however the Intel controller on the x58 chipset will not let me do non boot raid setup so i can only get 2tb max in that setup.
The i know on board raid isn't the best but raid controller cards are expensive. I will basically use this server for all my data, website creation movies, and music store. i have my os on a raid 0 2x 300gb veloci raptor. Let me know what your ideas are.
View 2 Replies
View Related
Jan 1, 2013
How to set up my 120 GB SSD as just my OS Drive then use my 1 TB and my 750 and another 750 for data etc. So I have backed up all my data from my current install (right now I am running my OS from the 1 tb and the SSD isn't even being used yet. I just wanted to know the best way to set it up so I can use the SSD JUST FOR THE OS and then install programs and steam etc in the 1 TB (cuz i got at least 500 GB of games from steam). Can I just install the OS on the SSD then format my 1 TB and make 3 folders Users, Program Files and Program Files (x86), and then install programs in to the appropriate folders? User Profiles - Create and Move During Windows 7 Installation.
View 7 Replies
View Related
Aug 15, 2009
I have just upgraded my HP MC from Vista to Windows 7 Ultimate with a clean install. When I run the Live TV setup, Im able to go through all the steps including selecting the set top box and channel changing speed etc. However, when I get to the very last step where it aks me to confirm the signals to be configured with, I select next and get the follwoing error " TV Setup has encountered a serious problem, select finish to exit and try again. If the problem pesists, restart MC or the computer. I have tried this but to no avail.
View 2 Replies
View Related
May 28, 2011
I would like to know the commands to enter to find the following:
-IP Address
-Internal IP Address
-Subnet Mask
-Gateway
-DNS Server
They are needed to set my new Sony TV for network setup.
View 3 Replies
View Related
May 27, 2012
Can my computer in china( Beijing) connect to my cousins router in hong kong...using his ip/network and browse the web, like setting up his network as VPN server?
View 2 Replies
View Related
Aug 19, 2012
I have recently moved to the Netherlands and now in an apartment with a common internet that 3 people, including myself are sharing from. I have been unable to hook up my own wireless router and cannot figure out how to solve this. As of now I am hard wired into the wall where the internet is working. When I plug in my wireless router I lose all internet.If I plug in a cable from Lan1 to my computer I still get nothing...I'm not the most tech friendly person but I do know how to set up my computer. Am I unable to hook it up because of the main shared modem or what?
View 1 Replies
View Related
Sep 23, 2011
install SP2 to WinCC V7
View 6 Replies
View Related
Oct 29, 2009
How to Setup and Use ReadyBoost in Windows 7 ?
View 0 Replies
View Related
Jan 26, 2012
i have 2 pcs at home.1 my new comp and 2nd m old lappy both windows 7 ultimate.i have a binatone dt845w - wifi modem due to some conditions i cant connect any of them with wire
1)so my question is how i set homegroup?
2)can i transfer any file over it?
3)can i install windows 7 with computer to another ?(reinstall)
View 4 Replies
View Related
Apr 6, 2012
I have this problem where whenever i want to install a game or program that uses "setup.exe" doesnt work. Autorun doesnt show any forms of life so i go into the disk find the setup.exe run it and nothing happens, cant even see it in task manager, tried shutting processes and stuff, checked my windows files using some cmd command, nothing helped, I just double click it and nothing happens, literally nothing. I cant install anything.
View 3 Replies
View Related
Sep 27, 2012
how to setup a router
View 2 Replies
View Related
Oct 27, 2012
I have a wireless router; how do I set up wifi?
View 1 Replies
View Related
Feb 4, 2009
I have an application with a setup.ini file that is causing the Application Compatibility Service to flip out when I try to install it. I edited the setup.ini file to include the following (which is probably incorrect):
[Win7]
MajorVer=6
MinorVer=1
MinorVerMax=2
BuildNo=7000
PlatformId=2
If anyone has an idea of how to correctly edit this file so that Windows 7 knows there are no compatibility issues, it would be much appreciated.
View 2 Replies
View Related
Sep 1, 2011
fix a new Toshiba laptop which would not allow the installation of an HP PSC 1315 printer/scanner. After disabling all startups and services other than MS, succeeded in getting the drivers installed. Now I'm trying to clean the crap out of the computer, one of which is "Amazon Links". Will not uninstall from EITHER Programs and Features or Revo Uninstaller. Get the message that is the title of this post. 've seen many threads on the Web about this, but none that had a real answer. I would ordinarily try safe mode, but cannot find any folder with Amazon Links in it, so don't know where it is.
View 3 Replies
View Related
Mar 26, 2011
Just formatted a laptop, reinstalled windows7 and all of the drivers. My laptop is an Acer Aspire 7738G-6006.
Here's the problem: To get the volume slider on the keyboard to work, I need to install Launch Manager. I found the download on the website and extracted it. When I run setup.exe though, absolutely nothing happens. It doesn't even show up for a split second in task manager.
I tried the same file on another computer and it ran just fine. I installed .Net framework as well as the C++ Runtime Distributable. No change. I've tried to run in compatibility as well as an administrator. I also tried Dependency Walker, it had this to say:
I tried downloading the new IE, no change, even tried DLing the DLL and putting it in the folder and that had no change either.
View 3 Replies
View Related
