I have this problem where whenever i want to install a game or program that uses "setup.exe" doesnt work. Autorun doesnt show any forms of life so i go into the disk find the setup.exe run it and nothing happens, cant even see it in task manager, tried shutting processes and stuff, checked my windows files using some cmd command, nothing helped, I just double click it and nothing happens, literally nothing. I cant install anything.
View 3 Repliesone of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup.Now when I boot up the netbook, and it attempts to go through the initial windows setup "Setup is starting services", and then throws an error message: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation.I restart, and the cycle continues. This happens whether I try to boot normally or in safe modeI've got no CD-drive attached to it, so I'm not sure what I can do to break this error cycle.
View 6 Replies View RelatedWhen I try to install some programs and drivers i get error: 'Setup will only run in administrator mode. setup is aborting.'. I only have one account which has administrator rights. I have already tried to enable and disable UAC, booting in safe mode, run as administrator, enabling original administrator account, adding permissions, taking ownership, changing compability mode and other but nothig is solving my problem. I'm running windows 7 x64 build 7000.
View 4 Replies View RelatedI am trying to upgrade Vista to Windows7 Home Premium and I got this message after the installer copied ~2GB of files on my PC:
"setup can't continue. restart the computer and restart setup. when prompted try getting the latest updates."
I restarted the PC and restarted the setup and I got the same message. I updated the Mother Board Bios and restarted the setup I got the same message. I have tried both options (get update and no update during the setup). And it didn't work.
I do not want to do custom install (fresh install) on my computer.
Lately, sometimes at random one of my opened programs would freeze ant not respond.So I would use Task Manager to delete the process. But then that not responds and then I can't to anything and have to force restart by holding the power button.e.g. Firefox, Chrome, Task Manager are open. Chrome freezes, then task manager and firefox would be fine until i open up a new tab or affect it in anyway.
View 9 Replies View RelatedI've tried just about anything I can get my hands on for a week now and I still can't solve the problem. I keep getting disconected from the net or worse not even connected and get the message that the DNS server is not responding.I tried removing NIS (Norton) but it doesn't help, then I entered "safe mode"with networking and as a miracle everything is perfect and the speed connecting to a web page is outstanding.
View 9 Replies View RelatedDNS is not responding?
View 1 Replies View RelatedKeep getting a dns not responding !!!
View 23 Replies View RelatedI can t regist from youtoub to realplayer and i have internet its problem with DNS.
View 4 Replies View RelatedMy computer is only a couple weeks old. I use the latest version of Firefox and today it keeps freezing up. It will just say Not Responding. I've rebooted several times and it's still doing it. Not sure what else to do.I'm not very techie.
View 12 Replies View RelatedAs an employee of Home Depot we have a website we can enter from our home computer to access our weekly hours, pay benefits, etc,. I have been using this for months.As of last week my log in page will not allow me to enter this site. I have tried everything I can think of to correct this. I've called the tech support at the Home Depot. We have reset and changed the password three times. The Tech can access the site from his side and I can go to a different computer and access it. I just can't access it from my home computer. I have a Windows 7 64 bit operating system. Question
View 2 Replies View RelatedJust wiped my computer with my Windows disc. It connects to our wifi and everything but it says the DNS is not responding, so no internet. I have a Linksys WUSB600N as an adapter that connects to our Linksys WRT320N. Manufacture: eMachines <--- Hate them!
View 1 Replies View RelatedI am working on an Acer laptop running Windows7. Internet connectivity was fine, then just stopped. I have attempted to get on the internet with multiple access points, hotspots, pdanet, 2wire router. The connection is fine to the devices, when attempting access the internet, Internet Explorer cannot display webpage. Diagnostics message isDNS server isn't responding.
View 5 Replies View RelatedI have a router which is connected to a desktop (not wireless) and a laptop which is connected wireless. On my laptop, i have internet, i have connections, i can browse the internet, but my computer says this :
Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding.
when i connect to the wireless internet, my laptop seems to be connecting, but taking longer than usual.
i have flushed the dns cache, and disabled IPv6
I'm experiencing wireless connection problem right in the middle of browsing. Loading of page suddenly stops. The wireless connection seem fine cause I don't see any exclamation point appearing next to it. I tried to powercycle but it didIt comes and goes for couple of days. I troubleshoot the connection and receive this message: "Your computer seems to be correctly configured, but the device and resource (DNS server) not responding. Here is the ipconfig /all turn out:[CODE]
View 2 Replies View RelatedI'm having trouble with the internet on my laptop. It says that it is connected to my wireless but it will take a long time loading sites or just pop up an error stating the the DNS server is not responding or that the DNS lookup failed.
View 9 Replies View RelatedI have a desktop with Windows 7 on it, which hosts a virtualbox VM which runs Windows XP. For some reason I can't connect to the internet from my Windows 7 machine, however I can connect fine from the VM which runs on top of it? My wife primarily uses the VM so I'm not sure exactly when this stopped working, it used to work fine. When running the troubleshooting tool it tells me the Firewall may be preventing the program from running, so I turned the firewall off but that didn't change anything. A second problem the tool indicates is that "Windows can't communicate with the device or resource (primary DNS server)". I have tried releasing and renewing my ipconfig, also to no avail.
View 7 Replies View Relatedi have problem With my new Laptop it says DNS server not responding Router (Wifi). only pages dosnt load and it says internet access my desktop Works fine here is my internet ipconfg Microsoft Windows [Version 6.1.7600]Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Fahad-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter Wireless Network Connection 8:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter #
[code]....
Ok, after 4 days of research and much head scratching, I will enter the fray. I think that my problem is in my router after reading everything I can find on the net. I'm getting the error ' DNS server not responding' but have followed suggestions from this site and others to resolve the problem. I ran into a problem with my router, and had to do a hard reset to factory defaults. After I had restored info provided by my ISP for settings required by them, I have network connectivity and I have Internet, but the two will not connect. I can ping my router from the network, but cannot connect to the Internet. I know just enough about networking to be dangerous to my self. Unfortunately for me this is my business network, and it is vital that i have internet.
View 6 Replies View RelatedI am having problems connecting with the internet on my PC. I have a Linksys WRTP54G router and am running two computers (desktop, laptop) on wirless G and an Xbox 360 wired.
I flashed the firmware on the router and this seems to have cause problems, but the new firmware is way better for VOIP and has improved the wired connection.
Weird thing is, my laptop with the integrated wirless card connects to the internet and network without a hiccup.
The desktop keeps connecting to the network, but has no internet connection. The diagnostic says the DNS server isn't responding. Both those fields for IPV4 are set to obtain automatically, the same as my laptop. IPV6 is not being used for any of the computers.
The only difference I see between the setups are that my desktop uses a USB wireless card. For some reason when I connection to my network which is called "connection" with the desk top it shows up as "connection 2".
I have tried re-installing the USB adaptor, I have manually given IP address and the DNS servers. None of it works, keep getting "The DNS Server isn't Responding".
last night, without any reason, my f4, f5, f6, and esc keys stopped working. it solved itself, but shortly afterwords it did it again, and even after two reboots i cannot get them to work again. i use hotkeys all the time in firefox and elsewhere, and these are probably my most-used keys. they're very useful and not being able to use them feels really restricting. i don't know what caused this, but i do know that both times it happened i was browsing Internet. i don't know if that's coincidental or not, but at this point i just don't care.
View 1 Replies View Relatedim having trouble with my internet it says Your computer is working fine but the (DNS server) Is no responding
This is my Ipconfig /all
C:UsersOwner>ipconfig /all
Windows IP Configuration
[code]...
Suddenly got an error saying dns server was not responding while I was trying to connect printer to wireless router. Let me know what other info you need.
Windows IP Configuration
Host Name . . . . . . . . . . . . : G550
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : gateway.2wire.net
Wireless LAN adapter Wireless Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
Physical Address. . . . . . . . . : 00-26-82-CF-C1-3A
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . : gateway.2wire.net
Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter
Physical Address. . . . . . . . . : 00-26-82-CF-C1-3A
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
[code]....
I am windows 7 IE8. Keep getting internet explorer (not responding). So I have to wait then I click and I am back on track. Is it a windows 7 issue as there is nothing wrong with my computer?
View 9 Replies View RelatedApexProgress.dat Is Not Responding
View 5 Replies View RelatedMy Internet Explorer IE8 and IE9 plus most of my programs like office and so forth give me "not responding" about a third of the time so I have to wait a minute for it to start responding. I went out and bought myself a SSD 60 GB for my OS. So I'm thinking of putting on my SSD drive and just building my OS from scratch. But before that I was also thinking of reinstalling my OS but I have the full version. Then Windows 8 Beta is coming out month after next and was going to put my SSD drive on that but can always get another one. So any ideas how I should approach this.
View 4 Replies View RelatedI have recently installed windows 7100 x64 on my acer 5920G laptop.
t7300, 8600mgt, 2gigs of ram
antivirus: nod32 v4.
The problem is that after a period of time of using my laptop (movies, browsing,...) it just ends responding. (I'm talking about 10-15minutes of use) for example:
Im watching an xvid, the xvid freezes, I say '**** not again'. Then I try to exit the mediaplayer and get to my desktop, try to get to the taskmanager but can't. Then it freezes. The hdd light remains on and stays like this. after this I do a forced shutdown but pushing the button for 7sec.
This same problem also occures when I'm on the net with my mozilla firefox browser, I don't know about the other browsers but I'm guessing that they would have the same issue.
All my devices work fine except for the intel turbo memory (pci memory controller) for wich i can't find a driver... there's another thread about it on this forum but the people don't seem the have the same problem I'm experiencing.
I am finding often that when I am running programs that even whilst they are running I get a response at the top of the program especially when I use Pro Tools say that it is not responding. I have adjusted my hard drives so that they don't go to sleep after a set period so why is it that I am constantly receiving this error?
View 6 Replies View RelatedSometimes my pc freezes...cant do anything anymore and also sound freezes. Then after a while it says the driver was not responding and has been restored. but sometimes it doesnt restore and then i have to manually power off the pc and restart it again. This problem happens both on desktop and on gaming.
View 5 Replies View RelatedI have a Samsung Q430, 64bit Laptop. A few days ago i got a blue screen so i didnt think much of it so i just restarted my computer. I didnt notice it for awhile but all my number keys with the exception of 3,4,6,8,0 now do not work.Things ive tried: Restoring computer to factory default, Updating keyboard driver and Running Virus and Malware scans.Its quite frustrating, i dont kno what to do now? Seeing how i have a factory restored computer & my number keys are still not responding.
View 4 Replies View RelatedA few days ago my keyboard stopped working. I believe I was uninstalling VMWare, which did not complete (but I don't know if that has any effect on it). I obviously tried the batteries, different keyboards to make sure it wasn't something simple. I tried plugging in to different USB ports (which all recognize the keyboard and installs the drivers) but it simply does not recognize the characters that I type. I have a several different keyboards that I have tried and I can not get them to work on the computer. The mouse works fine, and the volume and calculator key's work, along with the function keys. Everything else on the keyboard does not work. I have uninstalled all the hubs, re-installed driver's, which show the keyboard is installed (with no ! or error). I have ran out of options to consider, I am about to delete all the registry keys regarding the keyboards. I have been using the onscreen keyboard to login.I have both Logitech and Microsoft keyboards and installed and uninstalled Setpoint, Intellitype.
View 4 Replies View Related