How To Put Externals HDD Into Internals With RAID
Aug 10, 2012
i have decided to put my external HHD into my Desktop, because i have 4 WD externals, but the lack of Sata ports i bought PCI Express ( HighPoint RocketRAID 640 ), connected it, installed the driver & everything, but when i looked for my HHD in My Computer & Device Manager i didn't find them! Please tell me how to make a RAID between the two to show up in My Computer as one 6 Tera HHD as it was in the external unit? PS: i tried to but them back to the external unit, but that also didn't work! this is the device manager:-
View 9 Replies
ADVERTISEMENT
Jan 6, 2010
I have tried multiple fixes and still cannot connect any flash drive or external drive to any usb port on my computer without the dreaded "Usb not recognized" error. My mouse and keyboard are both usb and have worked fine though. I have unplugged the power cord from my psu for a few minutes. I have booted into safe mode. I have deleted the infcache.1 file. I have check my Bios settings (and have latest bios update). I have completely removed all the usb devices in device manager and rebooted which reinstalled everything. I have booted the computer up with a flash drive already in a usb port. I have gone into Drive Manager to see if anything is recognized without a drive letter. I have even applied the hotfix from here - [URL]. Nothing seems to work, yet all of these devices work fine on my netbook running Windows XP.
When I originally installed Windows 7 everything was working fine. I would say it roughly stopped working a month or two ago. I don't constantly use flash drives or my externals so I could be a little off on the time frame (why I didn't do a system restore). I first noticed the problem when I plugged in my Tmobile G1 phone to transfer files and it wasn't recognized. My phone would still charge off of the usb port, but I couldn't mount and browse the 4 gig sd card in my phone. It was working before because I have files on my phone that I transferred from my computer after the Windows 7 install. I started testing out my known, working flash drives as well as my usb powered 2.5" external drive and they too come up unrecognized on all usb ports (front and back).
My specs:
AMD X2 5000+ BE
Gigabyte GA-M55plus-S3G mobo
G.Skill PI Black 4GB ram (2x2 - DDR2 800)
2 Western Digital Sata drives
Nvidia 9800 GTX+ video card
450 Watt PSU (don't remember brand right now, but good amp rating on 12v for video card).
Windows 7 Ultimate x64
The only drivers I am using for the system that are not the default Windows 7 drivers are for my video card and onboard audio. Onboard audio is the only Windows 7 driver provided on the Gigabyte website for my motherboard. What shoild I do, check or double check or should I start considering formatting and a reinstall of Windows 7 (which I have been trying to avoid)?
View 4 Replies
View Related
Nov 19, 2011
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
View 1 Replies
View Related
Aug 24, 2012
I need a PCI SATA 6 RAID card that has at least 4 slots for 4 X 2TB Hard drives for a RAID 5
View 3 Replies
View Related
Jan 1, 2013
I had one hard drive failed(640gb). I bought replacement and tried to restore image but it failed. Then I wanted to convert to non raid system. I changed both drives(640gb) to non raid and bios change in advance setup. I am getting error when I try to reinstall win 7, "setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information". I have deleted old partition many times but win 7 setup on this dell xps435 desktop won't install windows.
View 4 Replies
View Related
Apr 25, 2012
I have tried to find the way to do this, but without success as I cannot see the wood for the trees.
I have a mature Windows 7 system, with so many applications loaded that rebuilding from scratch is just not an option. I have a 300MB Velociraptor wholly given over to the OS and another empty 300MB VR. I want to extend, that may not be the right word, my OS to use both disks in Raid 0.
View 2 Replies
View Related
Aug 12, 2012
Which configuration would be better using mobo sats 2 raid or using seperate rid controller via pcie card Rosewill Rc-211 wsis3132) or should I use mobo for raid and card for extra sata w/o raid I have more drives than sata slots. How do I transfer data videos/Tv shows from existing drive to raid?
View 1 Replies
View Related
Jul 10, 2012
I have Win 7 Pro 64 bit installed on an ASUS P7P55D LE motherboard which supports RAID 0,1,5 and 10 using Intel Matrix Storage Technology through an on board Intel P55 chip set. The system was assembled in Nov 2009 using two Western Digital Caviar Black 750Gb drives in RAID 1 as Drive C:. (I now know from Western Digital Customer Service that I shouldnt have done that, but lets move on from there). Last December, an error message informed me the RAID array was broken and identified one of the 750 Mb drives as needing replacement. I happened to have a spare 1.5Tb WD Caviar Black at the time, so I pulled the 750Mb drive and replaced it with the 1.5Tb drive. Life was once again good. Then on July 4th (wouldnt you know) there was a repeat of the December 2011 error message telling me to replace the other original 750Gb drive. Okay so I had another 1.5Tb WD Caviar Black laying around (dont ask) and did a similar swap out. Thats when I emailed WD Customer Support asking about the 750 since their diagnostic software said the drives were fine. Thats when I learned that I should be paying lots more for enterprise quality drives if I want/need RAID. Well thats not what ASUS says in their advertising, but live and learn. All thats prologue, because my real question is whether its possible to break the hardware-based RAID 1 array and set up a Windows 7-based RAID 1 with the two 1.5Tb WD Caviar Black drives without having to reinstall Windows 7.
View 1 Replies
View Related
Jan 6, 2009
anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
View 0 Replies
View Related
Feb 26, 2012
Recently had my RAID 1 go critical, "a member of the array has failed or is not responding". This happened after getting BSOD while playing Battlefied 3 (that was loaded on the RAID (is serving as C). I replaced one of the drives, repaired the RAID and then loaded Call of Duty MW3 into a different 320 GB drive. That game has also crashed to BSOD and now RAID is listed as critical again. RAID looks like it has split the two drives. One is listed as <LD 2> and the other is listed as <single drive>. Is there a way to get them back together again? Sure would love to find harmony within my computer.
View 3 Replies
View Related
May 12, 2009
Currently I'm running the RC1. I just got two additional hard-drives to throw into a raid configuration which I set up properly within the bios (worked in XP).
The trouble is when I boot it makes it out of the BIOS and into the Starting Windows Screen. Windows bluescreens at that point. It only bluescreens when I have the RAID option enabled in my bios. I imagine that there aren't drivers for the controller?
When I go to intel's website to install their matrix controller drivers, I get this error: this computer does not meet the minimum requirements for installing this software.
View 5 Replies
View Related
Dec 16, 2011
I recently bought my new computer, and it came with two RealSSD C300 256 GB. I want to set up raid 0 to have one drive with 512 GB. I really don't mind the performance boost, i just want to have one partition with 512 GB. I already have it on RAID mode, but whenever the Marvel screen appears, i already tried pressing CTRL M, CTRL R, CTRL I, Space, none of those seem to work.
I own the Maximus IV Extreme motherboard.
View 9 Replies
View Related
Mar 2, 2012
This may just be an idle thought, but I'm wondering if one could setup a RAID configuration across two or more PCs? I know that one PC can have more than one RAID system in it, and even outside of it, with controller card going to an external case, but how about two totally separate PCs only connected via a Wireless adapter on a network?
View 4 Replies
View Related
Aug 10, 2010
I am looking into setting up Raid 1 on my windows 7 machine
View 4 Replies
View Related
Apr 18, 2011
I'm using a p8p67 motherboard, an OCZ ssd, and two samsung hdd's.
The raid works great, expcept the fact that its always showing empty. I just installed a bunch of stuff to it, but I think that somehow went into the SSD...
View 1 Replies
View Related
Nov 30, 2010
I amtryuing to reinstall windows 7 pro x64 on my desktop, but I have a raid 0 array setup. I had it installed on these before I had virus problems, now when I go to install it I cant seem to see the hdd's when in raid in bios, only when in ahci mode
View 2 Replies
View Related
Jun 13, 2011
I did have 2 hdds in RAID 0, and wanted to switch to a single disk (so I could swap the motherboard without issue).Cloned the 2 hdds to the single using Norton Ghost. It works fine and the PC boots no problem - but only if the bios (Asus) is set to 'configure sata as RAID'. If I change to 'configure sata as IDE' it won't boot (bsod during windows loading screen).The PC clearly thinks the new, single hdd is still a raid system - which presumably could cause problems when I upgrade the mobo. I have tried Windows 7 repair, fixmbr,fixboot, rebuild bcd... none of it makes any difference! How can I get the PC to realise it's just a single disk?
View 4 Replies
View Related
Oct 11, 2011
My refurbished HP desktop came configured for RAID but has just one drive. Long story short, this PC is slow and getting glacially slower -- apparently due to my hard drive's abysmal performance which, I believe, is due to (i) RAID config and (ii) the reportedly crappy AMD AHCI-compatible controller/driver.
I've found lots of great info here for moving from IDE to RAID but not the reverse. Hoping by switching to IDE that I can at least see decent performance. It is unusable "as is" (imagine right-clicking on a file in Windows Explorer and it not responding for nearly a minute at times!).
I attempted to change the BIOS for IDE or AHCI (the two options besides RAID) but Windows refuses to load in either case. So, my question is:
How can I reconfigure to boot Win7 to IDE (instead of RAID) without having to start from scratch? Reinstalling all my apps is just too painful to contemplate, so I'm hoping I won't have to.
Thought about doing a non-destructive reinstall of Win7 (found an article describing how to do this), but have NO idea how to accomplish the changeover to IDE from RAID, i.e. what to do, and when.
PC SPEC/CONFIG
HP BK169AAR-ABA HPE-210f | Windows 7 64-bit Ultimate
CPU: AMD Phenom II X4 945, 3000 Mhz, 4 core
[Code]......
View 9 Replies
View Related
Apr 22, 2012
I have windows 7 and a single RAID HDD. I want to convert the HDD to non-RAID, so I use with windows. How do I do that under the OS? I was unsucesfull in doing so in BIOS.
View 1 Replies
View Related
Feb 20, 2010
How can I program Raid ?
View 3 Replies
View Related
Feb 22, 2010
I am planning on upgrading from XP Home to Windows 7 Home Premium and would like to install two new hard drives with RAID 1 at the same time. I purchased the Upgrade Windows 7 version, not the full one. But I do still have the full version of XP. So I'm thinking that I will have to configure the RAID, install XP on the new drives and then go back and do a clean install of Windows 7. Is there any shorter way to go?
View 1 Replies
View Related
Dec 26, 2012
I currently run windows 7 Premiem on 2 1gb RPM S-ATA Drives in Raid 0 (i have over 50 new games installed) i am upgrading my OS drive to a SSD in a few days can i simpley install windows on the new drive set it to boot from ssd from bios and continue to use my HHDs in Raid 0 for the main part of my games because i have way more games then space on my ssd.
View 2 Replies
View Related
Nov 27, 2010
I have W7 installed, works fine. I bought 2 HDDs and wanna add them just as data disk and set up as RAID1. If I set up RAID in bios, Windows crashes when loading with classic blue screen + restart. Is there any way to make it work (install some driver etc.) or do I have to reinstall Windows with RAID set up prior to Windows installation? I have Asus P7P55D-E board.
View 1 Replies
View Related
Jun 27, 2009
I am planning to set up RAID but cannot figure out if I need to load drivers at install of the OS or not. Does anyone know if you need to install the driver or not? I guess I could do it just in case...it's for a GA-EP45-UD3P Gigabyte. I guess this pic confirms I have on board RAID support right?
I had to sign up to find this but here is the "checklist" for anyone with the same question.
View 8 Replies
View Related
Oct 1, 2009
I've recently bought ST-Lab A142 PCI ATA 133 IDE Card to make RAID to make RAID from my 2 HDD drives 60GB each.
It comes with a cd on which there are drivers for win 2000/xp/vista 32/64bit. But no mention of Windows 7. I am trying to install Windows 7 x64 on this RAID but it doesn't see RAID. I've tried downloading the lates drivers from ST-Lab official site but with no success, Windows 7 just doesn't want to install them. Is there any solution u can advice?
View 4 Replies
View Related
Oct 28, 2009
I had to move the hard drive that I installed W7rc on to a SATA port that is configured in the BIOS as a raid. Now it will not startup because it needs the raid driver installed.
How can I install that driver?
I have tried "Startup repair" and it tells me it can not fix the problem. I tried to do an upgrade and you all know what it said. Must boot into that os first then do the upgrade.
View 9 Replies
View Related
Oct 31, 2009
I have 2x 500GB Western Digital WD5001AALS Caviar Blacks. I have set the BIOS up for raid 0 instaled a intel raid driver during install (not f6) windows 7 64bit says that its one drive and lets me install it but when i go to device manager it says that there is no driver installed. i have installed intels matrix storage manager thats relling me that raid 0 is operating (but is as os not saying that there is no driver) i have a bloodrage mobo.
View 2 Replies
View Related
Nov 30, 2009
I have been trying to install Windows 7 x64 Ultimate on a Gigabyte GA-P35-DS3 (rev 2.0)
and everytime i do the install fails and the install is then rolled back.
I currently have Vista x32 installed on Gigabyte Raid 0 (there's also an intel raid option but i've never used it). The Vista install runs fine and i've never had a problem.
When i try to install using the GA-P35-DS3 (rev 2.0) raid drivers from the Gigabytes site i get the usual microsoft grumbles about unsigned drivers but then the install seems to go OK from there until the install completes and reboots. At this point it errors out and reboots into the OS rollback install.
Does anyone know if this is an issue with this driver or does anyone have a link to another driver?
View 8 Replies
View Related
Jan 4, 2010
I've read several forum threads on this, but am still having trouble. I have win 7 32bit RC up and running for a long time on a 500 gig WD. Bought two 1Ts for a raid 0. I have the RAID chosen correctly in the BIOS, and the utility works fine. At the clean install for either 64 or 32 bit, I try to choose the drivers which I have downloaded from Intel and Asus, and tried to use the Vista drivers off my P5Q install disk, and still, Win 7 does not recognize the drive.
I have been home building and using computers for the past 25 years and I guess technology has gotten way over my hobbiest head. I have tried the USB flash drive route and I doesn't work either. Please, I know of the F8 workaround for unsigned drivers, but that doesn't work either. So, how are people raiding Win 7 at clean install?
Second question, is there a good tutorial at technet.com (which I can't find there) or someother place that tells step by step how to raid under disk manager in win 7?
View 4 Replies
View Related
Apr 28, 2009
I've just installed Windows 7 RC build 7100 onto my system. As always like with Vista installations in the past, I run into this problem. I have a DFI Lanparty NF4 Ultra-D motherboard and for some reason my RAID drive doesn't show up. I can see the two HDs I have set up as a raid appear and separate individual drives under My Computer but can't access them unless I format them which is something I dont want to do. I checked under Device Manager and under Stoare Controllers, NVIDIA nForce RAID Controller is installed...but I think I'm missing the proper RAID tool? I'm not too sure about this.
My Device Manager lists everything as installed, but each time I restart my computer and boot up, the computer is trying to install some drives but "Failed." The prompt says, "Standard Dual Channel PCI IDE Controller" x3, and all 3 Failed to install. I have no idea if this is the actual problem because I'm trying to get my RAID Stripe to work and they are both on SATA connections and not IDE...I have tried a few sets of nForce packs such as Fernandos_XP_64bit_nForce4-5_non-AHCI_WHQL_PACK_v5.4 but no avail.
View 5 Replies
View Related
Dec 20, 2010
Can i get a detailed article on RAID. What is it? What does it need? What are its advantages? I think i have RAID enabled desktop(if there is anything like that !?!)
View 9 Replies
View Related
