I'm using a p8p67 motherboard, an OCZ ssd, and two samsung hdd's.
The raid works great, expcept the fact that its always showing empty. I just installed a bunch of stuff to it, but I think that somehow went into the SSD...
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
I had one hard drive failed(640gb). I bought replacement and tried to restore image but it failed. Then I wanted to convert to non raid system. I changed both drives(640gb) to non raid and bios change in advance setup. I am getting error when I try to reinstall win 7, "setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information". I have deleted old partition many times but win 7 setup on this dell xps435 desktop won't install windows.
I have tried to find the way to do this, but without success as I cannot see the wood for the trees.
I have a mature Windows 7 system, with so many applications loaded that rebuilding from scratch is just not an option. I have a 300MB Velociraptor wholly given over to the OS and another empty 300MB VR. I want to extend, that may not be the right word, my OS to use both disks in Raid 0.
Which configuration would be better using mobo sats 2 raid or using seperate rid controller via pcie card Rosewill Rc-211 wsis3132) or should I use mobo for raid and card for extra sata w/o raid I have more drives than sata slots. How do I transfer data videos/Tv shows from existing drive to raid?
I have Win 7 Pro 64 bit installed on an ASUS P7P55D LE motherboard which supports RAID 0,1,5 and 10 using Intel Matrix Storage Technology through an on board Intel P55 chip set. The system was assembled in Nov 2009 using two Western Digital Caviar Black 750Gb drives in RAID 1 as Drive C:. (I now know from Western Digital Customer Service that I shouldnt have done that, but lets move on from there). Last December, an error message informed me the RAID array was broken and identified one of the 750 Mb drives as needing replacement. I happened to have a spare 1.5Tb WD Caviar Black at the time, so I pulled the 750Mb drive and replaced it with the 1.5Tb drive. Life was once again good. Then on July 4th (wouldnt you know) there was a repeat of the December 2011 error message telling me to replace the other original 750Gb drive. Okay so I had another 1.5Tb WD Caviar Black laying around (dont ask) and did a similar swap out. Thats when I emailed WD Customer Support asking about the 750 since their diagnostic software said the drives were fine. Thats when I learned that I should be paying lots more for enterprise quality drives if I want/need RAID. Well thats not what ASUS says in their advertising, but live and learn. All thats prologue, because my real question is whether its possible to break the hardware-based RAID 1 array and set up a Windows 7-based RAID 1 with the two 1.5Tb WD Caviar Black drives without having to reinstall Windows 7.
anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
I just downloaded Windows 7 and transfered over my program files from windows.old to the program files in windows 7. The problem i'm having is that start->all programs is empty, it isn't populating from the program files folder. Is there a way to tell the computer to search for programs and repopulate the all programs?
I erased a TV serie and some musc and subtitles off a DVD-RW, then proceeded to replace it with the same show but with subs in Spanish. Guess what? It says it has only 260MB free, and won't let me burn the show to it!
got windows 7 on my computer and its kinda <profanity removed> up,when i start it,i can be online for some time and then it kinda freezes,on task manager i can see like 30 svchost.exe or smth like this,and after some time i cant open anything more.so i want to empty the computer,remove the windows and all files and then im going to put on the windows XP,so can i remove it without the cd?
Tech Support Guy System Info Utility version 1.0.0.1OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bitProcessor: Intel(R) Celeron(R) CPU900 @ 2.20GHz, Intel64 Family 6 Model 23 Stepping 10Processor Count: 1RAM: 1915 MbGraphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 6 MbHard Drives: C: Total - 227676 MB, Free - 207087 MB; Motherboard: TOSHIBA, Portable PC, Base Board Version, Base Board Serial Number
I just reinstalled windows 7(32bit) and my windows.old file, which doesn't contain anything in it except for empty folders, still has size to it. Does anyone know what the deal is with this? Never had this happen to me.The show hidden files/folders option is ticked and still shows nothing. Is this a glitch?
I have a folder I've been trying to delete for some time but I am unable to. I am using cmd prompt and get the message "the directory is not empty". I know it's not empty but it needs to get deleted.
D:>RMDIR /s m m, Are you sure (Y/N)? y - The directory is not empty.
The one he has is a 32 bit with Windows 7 and Mcafee Antivirus. There are some free aplications such as a cd/dvd cover software that he installed on his old laptop with Vista that worked ok. On the newer one they seem to install but theres no Desktop icon that he requests and in All Programs the folder is there but shows as empty. In uninstall or change the files are there. I thought it may be User Account control so i suggested he disables it and try to download again but its still the same. He also tried to install trials of other things with the same result. I installed the applications he wants on my Vista with no problems so i immagine the problem is with Windows 7 security somehow.
I have a couple of Windows 7 machines that have suddenly had several empty folders appear in the root directory of the c drive.
The odd part about it, they are all labelled <computername>.1234 or four to five seemingly random numbers. They aren't a jumble of hex numbers that I'd expect from Windows Update in XP (which is pretty much the only thing google has spat out for me on this issue). I'm trying to find out if this is a virus or what sort of software might be creating these folders. I did a full MBAM of the system, as well as a full GMER scan, and gave it a shot with TDSSKiller as well a Sophos AV and they have all found nothing. I also took a look using process explorer and autoruns and I didn't find anything suspicious as far as I could tell so I don't think it's malicious. I just want to figure out what could be creating them, or if anyone had heard of this issue.
A client brought in a Dell laptop with a missing driver. A tech downloaded a driver onto a flash drive. I'm not sure of where the driver came from. When the flash drive was put into the computer it started loading something and the tech pulled it out and restarted the unit. After reboot the tech noticed that the start menu was empty. Typical of a hidden files infection. After a second reboot the unit goes straight to startup repair. I pulled the HDD out of the unit and hooked it up to another computer with an enclosure. The drive reads as 99.9% free space. All of the the folders are there but they all show as empty (0 bytes). The recovery partition is intact and the drive passes Dell diags. Any ideas on recovering the data? I'm sure I could just restore it but the client needs the data.
I recently had some issues with my month old Dell N5050 Laptop that required I do a System Restore, After discovering that for some odd reason all my Restore files were gone, I restored the computer to Factory, I set up the Restore option, saved a Restore and made sure to keep some restores, about a week or two later here we are, and all my restore files are gone, I wanted to restore my computer to fix an issue I just posted in here, but I can't, and I really don't have the patience to do another Restore to factory
The manage add-ons folder is empty. There are a variety of ways to get to that folder and I have tried them all. There is nothing in it. No toolbars, no search providers, and no Accelerators. It doesn't even contain the InPrivate filtering link. What's more the navigation Pane is also empty.
It's odd because the most common add-ons that shoud be accessable there seem to work OK. Adobe Flash, Java ..etc. Everything is updated. PC: Windows 7 x64, IE8,
I'm having a very strange issue after I did a boot time virus scan in Avast to remove a virus. Avast seems to have removed the virus just fine, however I can't get Windows to show directories or files any more.If I open Windows Explorer and go to C:Users it says the folder is empty. However if I right click and select properties, it calculates the folder as 10.8 GB. I can still log in fine and run software etc. This problem isn't just in the C:Users folder. My library directories show empty and I was immediately afraid I lost all of my pictures because searching for *.jpg on my system yields no results. However, I remembered the exact path to one of the file names and sure enough it opened the picture. For example when I enter the exact address in Windows Explorer:C:UsersMyUserNamePictures2011MyPic.jpg it opens.But if I list C:UsersMyUserNamePictures2011 it says "folder is empty". One more thing to mention is that I tried browsing files through the command prompt. Whenever I try to do a directory listing with the dir command I get the error: Volume in drive C has no label. Volume Serial Number is 2AEE-FDC8. File not found. However, I can still cd into existing directories that I know exist. I just can't list the directories or files. Unfortunately I upgraded to Windows 7 SP1 right after this happened because I thought it might fix the problem. Now I can't do a system restore to the point where my computer wasn't having this problem.
After an update install from Vista everything seems to be working perfectly EXCEPT none of my existing program are listed in the Start-All Program--it is completely empty! I find I can pin programs to the menu and if I install a new program it does show up. I have no problems accessing my programs from the desktop icons. I want my All Programs back!!
im currently Networking a HTPC with my main rig, now i can pass info from one machine to the other but it will only see the Windows 7 HDD in the main rig..??, is there no way i can access the Vista HDD..??, or does it have to be the same OS to network..??
i tried to add a shortcut to the vista HDD into the user account on Windows 7, but upon opening it on the HTPC all folders are empty..??
Here's the problem: when I open task manager to close unresponsive programs, none show up. occasionally some programs do show up but they go away before i can do anything. I will record it so you can see. the same happens with record/playback devices.
I've updated my mobo's BIOS today and the new version adds support for PCEEv4, so I get the Dolby tab working, but the enhancements all disappeared. I know for a fact they work, since I had them before changing the BIOS. I can't really rollback the bios as I pretty much need the SSD updates on the BIOS.I've reinstalled the drivers about 3 times already. I've tried from both the motherboard's page: GIGABYTE - Motherboard - Socket 1155 - GA-Z68X-UD3-B3 (rev. 1.0)And from Realtek's page. Neither worked as far as giving me the enhancements back. I get this shiny new Dolby thing that is quite frankly, useless. It uses only 3 speakers out of the 5.1 system and I'd much rather have the enhancements back so I can use the audio fill to get all my speakers going when there's a stereo stream.
Any suggestions on how I can fix this? Except for rolling back the BIOS, that is.All the DTS dlls appear as installed and part of the driver. The mic enhancements still work just fine. I have RAVBg64.exe starting with /forpcee4 toggle. I was wondering if there was perhaps a toggle that ignored the PCEE(Dolby tab) thing and went for windows enhancements instead. The enhancements also disappeared from the Realtek HD audio manager, so no luck there either. It doesn't even show an enhancement tab there, so I'm assuming it's loading wrong to favor the PCEE thing.
i can't see any printer list in my computer, i'm using window7 and i'm just sharing a printer to my other officemate, i want to change my default printer but when i look at my printer list it was empty.
I accidentally created a folder in C:UsersName called "Videos". I am the administrator on my computer and I am set to have full access to this folder, but I can't delete it (it says I need permission to delete the folder). The folder is completely empty too, if that matters.
My hard disk is corrupted and it causes frequent blue screen and restarts. I bought a new hard disk and transferred the data to the new hard disk. While transferring the files from old hard disk to new hard disk, the pc still encounters frequent blue screen and restarts, causing the data transfer to suddenly stop when it restarts.
Now I have installed the new hard disk and everything works fine.
The problem is when I open some word and excel files, the files are blank (like a new document) or show me a error message. This is probably caused due to the sudden restart while I was transferring files. I remembered some of the corrupted files are being transferred when the pc restarts by itself.
In the Windows Explorer, if I click on "Libraries" nothing shows up - it appears empty. However, if I search for a file I know to be in Libraries, I can find it via the search window. If I look at its location in the search, it certainly looks like the file is in the right location... I can even right-click on the file and" go to the location". When I do so, the window opens and is still empty. The location is, for example, LibrariesDocumentsMy Documents.
If I navigate up one level to "Documents" by clicking on it in the address bar, this too is empty, even though clearly there was "My Documents" there just a second ago.
I think the problem happened when I tried to view hidden files in the Libraries folder.