ADVERTISEMENT

Windows 7 Raid 0 Setup / Missing Raid Controller Driver

Nov 19, 2011

Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..

View 1 Replies View Related

Pci Sata 6 Raid Card That Has At Least 4 Slots For 4 X 2tb Hard Drives For A Raid 5?

Aug 24, 2012

I need a PCI SATA 6 RAID card that has at least 4 slots for 4 X 2TB Hard drives for a RAID 5

View 3 Replies View Related

Bios Change From Raid To Non Raid On Dell Xps435

Jan 1, 2013

I had one hard drive failed(640gb). I bought replacement and tried to restore image but it failed. Then I wanted to convert to non raid system. I changed both drives(640gb) to non raid and bios change in advance setup. I am getting error when I try to reinstall win 7, "setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information". I have deleted old partition many times but win 7 setup on this dell xps435 desktop won't install windows.

View 4 Replies View Related

Converting To Raid 0 Windows 7, Not Hardware Raid 0

Apr 25, 2012

I have tried to find the way to do this, but without success as I cannot see the wood for the trees.

I have a mature Windows 7 system, with so many applications loaded that rebuilding from scratch is just not an option. I have a 300MB Velociraptor wholly given over to the OS and another empty 300MB VR. I want to extend, that may not be the right word, my OS to use both disks in Raid 0.

View 2 Replies View Related

Raid Better With MB Config Or Separate Raid Controller

Aug 12, 2012

Which configuration would be better using mobo sats 2 raid or using seperate rid controller via pcie card Rosewill Rc-211 wsis3132) or should I use mobo for raid and card for extra sata w/o raid I have more drives than sata slots. How do I transfer data videos/Tv shows from existing drive to raid?

View 1 Replies View Related

Hardware RAID 1 To Windows 7 RAID 1

Jul 10, 2012

I have Win 7 Pro 64 bit installed on an ASUS P7P55D LE motherboard which supports RAID 0,1,5 and 10 using Intel Matrix Storage Technology through an on board Intel P55 chip set. The system was assembled in Nov 2009 using two Western Digital Caviar Black 750Gb drives in RAID 1 as Drive C:. (I now know from Western Digital Customer Service that I shouldnt have done that, but lets move on from there). Last December, an error message informed me the RAID array was broken and identified one of the 750 Mb drives as needing replacement. I happened to have a spare 1.5Tb WD Caviar Black at the time, so I pulled the 750Mb drive and replaced it with the 1.5Tb drive. Life was once again good. Then on July 4th (wouldnt you know) there was a repeat of the December 2011 error message telling me to replace the other original 750Gb drive. Okay so I had another 1.5Tb WD Caviar Black laying around (dont ask) and did a similar swap out. Thats when I emailed WD Customer Support asking about the 750 since their diagnostic software said the drives were fine. Thats when I learned that I should be paying lots more for enterprise quality drives if I want/need RAID. Well thats not what ASUS says in their advertising, but live and learn. All thats prologue, because my real question is whether its possible to break the hardware-based RAID 1 array and set up a Windows 7-based RAID 1 with the two 1.5Tb WD Caviar Black drives without having to reinstall Windows 7.

View 1 Replies View Related

SB600 ATI RAID AHCI Drivers? (BSOD On Boot If In RAID/AHCI Mode.)

Jan 6, 2009

anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).

Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.

(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)

I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.

Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.

Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.

View 0 Replies View Related

Portable Program Which Includes A Browser And A Mailing Program?

Aug 29, 2011

Im looking for a portable program which includes a Browser and a Mailing program, like Opera is, but NOT Opera (must be able to run beside Opera & Firefox!!)

View 5 Replies View Related

Windows Runs Installation Of Program When Start Program

Aug 14, 2012

I installed Weathrbug Plus and for some odd reason recently when I run it Windows runs the installation for the program. When I run the prograsm I get the typical "Preparing to install..." abnd then tyhe 'Configuring Weatherbug. I've been in contact with Weatherbug Support all day and we can't seem to find an answer.I'm using Microsoft Security Essentials.This is a clean install of Windows 7. I haven't used any other real-time security software other than MSE.I disabled MSE and tried it and got the same results.

View 6 Replies View Related

Stop Windows 7 64 Bit Program To Be Installed In Program Files (*86)?

Jun 23, 2011

64bit application is getting installed in program files (*86). How to change the destination folder. Insta shield is not giving this option.

View 3 Replies View Related

Write A Program In C Program That Shuts Down A Computer In 20 Seconds?

Sep 12, 2012

how can i write a program in c that shuts down a computer in 20 seconds

View 6 Replies View Related

Add / Remove Program File Only Contains Program Java

Dec 12, 2011

I don't know where this error hs_err_pid came from.I closed down explorer and there were all this notepad messages on my desktop and I can't get rid of them. Researching, I know this is a Java thing. I've uninstalled and reinstalled several times to no avail.My windows update is fully updated.I've run 3 virus programs.I notice this was addressed for someone using XP but what of Windows 7? My add/remove program file only contines the program Java (TM) update 29. Nothing else is listed as far as Java is concerned.I've run cleaner programs and these did not take care of the problem. Every time I restart my machine these errors immediate pop up at start up.

View 1 Replies View Related

Program Blocked By Program Compatibility Assistant?

Oct 3, 2009

Im trying to run a program on Windows 7. The program is a logitech installer. But Windows 7 Program Compatibility Assistant blocks the program and prevent me from running it. I have tried disable the Program Compatibility Assistant service in the service manager and i have also enabled the "Turn off Program Compatibility Assistant" group policy.But windows still keep blocking the program.

View 9 Replies View Related

Unable To Remove Old Program And Thus Cannot Install New Program

Feb 25, 2012

I have been using a program called Raw Therapee. I downloaded a new version and on installing it quit saying the old version must be removed. I could not find it listed in Revo Unistaller Pro, so I did a forced uninstall with the location of the main executable. This removed a lot of stuff. I checked the program folder and the folder and many files were still there, so I deleted them. I did a CCleaner in between and after. I then unhide and show system files and deleted the folders in the Appdata of main user and admin account, couldn't find it anywhere else.
CCleaner again and reboot. Went to install the new version again and it claimed that the old version was still installed. I did a search for *aw The* and found an entry in the hidden Program Data Folder. In the Admin account it will not let me in this folder to delete any remnants of the old version of Raw Therapee.

View 5 Replies View Related

ArcSoft TV Program Giving Pop Up When Set To Record TV Program?

Oct 3, 2012

I have an issue with my ArcSoft TV program. Recently something changed and now I get the UAC pop up asking if I want this program to make changes to my computer.Issue is this, I can set to record a program, but with the pop up now coming up, I have to be avaliable to click to record the progarm.Currently I have the UAC set not to ask (pop up). However I understand the reason for the UAC asking and I prefer it to ask. So what I need is a way to allow ArcSoft to run without the pop up, but all other programs to ask for security. What is the way to do this for this one program?

View 1 Replies View Related

RAID 1 Has Gone Critical

Feb 26, 2012

Recently had my RAID 1 go critical, "a member of the array has failed or is not responding". This happened after getting BSOD while playing Battlefied 3 (that was loaded on the RAID (is serving as C). I replaced one of the drives, repaired the RAID and then loaded Call of Duty MW3 into a different 320 GB drive. That game has also crashed to BSOD and now RAID is listed as critical again. RAID looks like it has split the two drives. One is listed as <LD 2> and the other is listed as <single drive>. Is there a way to get them back together again? Sure would love to find harmony within my computer.

View 3 Replies View Related

Bluescreen With RAID

May 12, 2009

Currently I'm running the RC1. I just got two additional hard-drives to throw into a raid configuration which I set up properly within the bios (worked in XP).

The trouble is when I boot it makes it out of the BIOS and into the Starting Windows Screen. Windows bluescreens at that point. It only bluescreens when I have the RAID option enabled in my bios. I imagine that there aren't drivers for the controller?

When I go to intel's website to install their matrix controller drivers, I get this error: this computer does not meet the minimum requirements for installing this software.

View 5 Replies View Related

How To Setup Raid 0 With SSD

Dec 16, 2011

I recently bought my new computer, and it came with two RealSSD C300 256 GB. I want to set up raid 0 to have one drive with 512 GB. I really don't mind the performance boost, i just want to have one partition with 512 GB. I already have it on RAID mode, but whenever the Marvel screen appears, i already tried pressing CTRL M, CTRL R, CTRL I, Space, none of those seem to work.

I own the Maximus IV Extreme motherboard.

View 9 Replies View Related

RAID Across Multiple PCs?

Mar 2, 2012

This may just be an idle thought, but I'm wondering if one could setup a RAID configuration across two or more PCs? I know that one PC can have more than one RAID system in it, and even outside of it, with controller card going to an external case, but how about two totally separate PCs only connected via a Wireless adapter on a network?

View 4 Replies View Related

Set Up Raid 1 On Windows 7?

Aug 10, 2010

I am looking into setting up Raid 1 on my windows 7 machine

View 4 Replies View Related

Raid 0 Is Always Empty?

Apr 18, 2011

I'm using a p8p67 motherboard, an OCZ ssd, and two samsung hdd's.

The raid works great, expcept the fact that its always showing empty. I just installed a bunch of stuff to it, but I think that somehow went into the SSD...

View 1 Replies View Related

Raid Set Up For Windows 7 X64?

Nov 30, 2010

I amtryuing to reinstall windows 7 pro x64 on my desktop, but I have a raid 0 array setup. I had it installed on these before I had virus problems, now when I go to install it I cant seem to see the hdd's when in raid in bios, only when in ahci mode

View 2 Replies View Related

Cannot Remove The RAID

Jun 13, 2011

I did have 2 hdds in RAID 0, and wanted to switch to a single disk (so I could swap the motherboard without issue).Cloned the 2 hdds to the single using Norton Ghost. It works fine and the PC boots no problem - but only if the bios (Asus) is set to 'configure sata as RAID'. If I change to 'configure sata as IDE' it won't boot (bsod during windows loading screen).The PC clearly thinks the new, single hdd is still a raid system - which presumably could cause problems when I upgrade the mobo. I have tried Windows 7 repair, fixmbr,fixboot, rebuild bcd... none of it makes any difference! How can I get the PC to realise it's just a single disk?

View 4 Replies View Related

Booting With IDE Instead Of RAID

Oct 11, 2011

My refurbished HP desktop came configured for RAID but has just one drive. Long story short, this PC is slow and getting glacially slower -- apparently due to my hard drive's abysmal performance which, I believe, is due to (i) RAID config and (ii) the reportedly crappy AMD AHCI-compatible controller/driver.

I've found lots of great info here for moving from IDE to RAID but not the reverse. Hoping by switching to IDE that I can at least see decent performance. It is unusable "as is" (imagine right-clicking on a file in Windows Explorer and it not responding for nearly a minute at times!).

I attempted to change the BIOS for IDE or AHCI (the two options besides RAID) but Windows refuses to load in either case. So, my question is:

How can I reconfigure to boot Win7 to IDE (instead of RAID) without having to start from scratch? Reinstalling all my apps is just too painful to contemplate, so I'm hoping I won't have to.

Thought about doing a non-destructive reinstall of Win7 (found an article describing how to do this), but have NO idea how to accomplish the changeover to IDE from RAID, i.e. what to do, and when.

PC SPEC/CONFIG
HP BK169AAR-ABA HPE-210f | Windows 7 64-bit Ultimate
CPU: AMD Phenom II X4 945, 3000 Mhz, 4 core

[Code]......

View 9 Replies View Related

How To Convert HDD To Non-RAID Under OS

Apr 22, 2012

I have windows 7 and a single RAID HDD. I want to convert the HDD to non-RAID, so I use with windows. How do I do that under the OS? I was unsucesfull in doing so in BIOS.

View 1 Replies View Related

Win 7 Upgrade With RAID 1

Feb 22, 2010

I am planning on upgrading from XP Home to Windows 7 Home Premium and would like to install two new hard drives with RAID 1 at the same time. I purchased the Upgrade Windows 7 version, not the full one. But I do still have the full version of XP. So I'm thinking that I will have to configure the RAID, install XP on the new drives and then go back and do a clean install of Windows 7. Is there any shorter way to go?

View 1 Replies View Related

HDD Raid 0 Upgrade To SSD?

Dec 26, 2012

I currently run windows 7 Premiem on 2 1gb RPM S-ATA Drives in Raid 0 (i have over 50 new games installed) i am upgrading my OS drive to a SSD in a few days can i simpley install windows on the new drive set it to boot from ssd from bios and continue to use my HHDs in Raid 0 for the main part of my games because i have way more games then space on my ssd.

View 2 Replies View Related

Set Up Raid After Windows 7 Install?

Nov 27, 2010

I have W7 installed, works fine. I bought 2 HDDs and wanna add them just as data disk and set up as RAID1. If I set up RAID in bios, Windows crashes when loading with classic blue screen + restart. Is there any way to make it work (install some driver etc.) or do I have to reinstall Windows with RAID set up prior to Windows installation? I have Asus P7P55D-E board.

View 1 Replies View Related

Raid Drivers Question

Jun 27, 2009

I am planning to set up RAID but cannot figure out if I need to load drivers at install of the OS or not. Does anyone know if you need to install the driver or not? I guess I could do it just in case...it's for a GA-EP45-UD3P Gigabyte. I guess this pic confirms I have on board RAID support right?

I had to sign up to find this but here is the "checklist" for anyone with the same question.

View 8 Replies View Related

Can't Find RAID Driver

Oct 1, 2009

I've recently bought ST-Lab A142 PCI ATA 133 IDE Card to make RAID to make RAID from my 2 HDD drives 60GB each.

It comes with a cd on which there are drivers for win 2000/xp/vista 32/64bit. But no mention of Windows 7. I am trying to install Windows 7 x64 on this RAID but it doesn't see RAID. I've tried downloading the lates drivers from ST-Lab official site but with no success, Windows 7 just doesn't want to install them. Is there any solution u can advice?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved