How To Change Hosts File
Mar 31, 2011
I didn't find a hosts file in the SysWOW64 folder, but I did find one in the "usual" place windowssystem32driversetc and I see it's NOT set to read-only. But when I try to edit it with notepad and save as "all files" rather than .txt (to avoid notepad giving it a .txt extension) it fails to save. It tells me I don't have permission (even though my user account is an administrator).
Is there some reg trick to allow me to change it? I've got a bunch of mappings I want to put in there.
View 6 Replies
ADVERTISEMENT
Jun 13, 2011
Yesterday I realized my hosts file went missing. This happened within the last week. UAC is on and my computer is clean so I assume this wasn't caused by malware, but I'd like to know what program did this. Is there any sort of log I can access that will show me that information?
View 3 Replies
View Related
Oct 11, 2011
basic system details:- PC:Intel. Core i7CPU 975 @ 3.3Ghz (not overclocked) Total CPUs 4 x 2=8...12 GB DDR3 RAM - Hard drive (1000.20 GB). Dual boot -Windows XP Pro SP3 (86 - 32 bit) Win 7 Pro- SP1.. 64 bit Graphics: 4 x NVidia GeForce 295..Sound-Creative GTX I have hosts file installed but at each boot into Win 7 (not when booting into XP), I get a message telling me that Hosts file manager cannot verify my hosts file, do I wish for new hosts file to be installed [yes or no] replying YES I get new hosts file installed and another pop up question "Do i want my additional entries addded [yes or no] with YES, my additional entries are restored to the new Hosts file. This all happens even if I have just installed a new edition of hosts file , my latest being Sept 5th.
View 14 Replies
View Related
Aug 19, 2011
I've got a browser search redirect imbedded somewhere in my hosts configuration but can't find the file to edit it out and hijackthis cannot fix it. The c:/windows/system32/etc/hosts is merely a sample and it's not buried in the registry. Where is the file that contains this rubbish?
View 4 Replies
View Related
May 24, 2010
Changes I've made on windowssystem32driversetchosts file are ignored by web browsers like IE, Firefox on Windows 7 x64.
On the other hand, ping command seems aware of hosts file. It gives the output of 127.0.0.1 for web addresses which are opened by web browsers normally.
View 14 Replies
View Related
Aug 23, 2011
I followed the instructions on this page: url...I renamed my hosts file "hosts.orig", downloaded, unzipped, and saved another hosts file from url... named HOSTS in the same place as the original. After that, I couldn't connect to the internet at home or at the library. I tried deleting the "new" hosts file that I downloaded, in order to put things back to how they used to be, but any time I try to do something to the "HOSTS" file I get a pop up saying: "The action can't be completed because the file is open in Cryptographic Services.... close the file and try again" which doesn't work. I tried stopping the DNS thing, but that only worked for about 5 minutes. I restarted the computer because it was slowing down, and the DNS thing restarted itself, and the internet disconnected again. I try stopping it, but an error message saying "Windows could not stop the DNS client service on local computer. error 1053: the service did not respond to the start or control request in a timely fashion"
View 1 Replies
View Related
Feb 7, 2012
Windows 7 64 bitI went to the Microsoft website and reset the hosts file. (I just copied the text on the page that said it was for the Windows 7 hosts) Prior to the hosts reset, the only text in there was 120.0.0.1 localhost. Anyone know what this means? This happened one other time before, so it has to be something.
View 3 Replies
View Related
Nov 28, 2012
I am trying to modify the hosts file so that it will block certain websites.I tried the following code, but it does not seem to do anything when i visit the website (as in, the page loads normally):Code: 127.0.0.1 asite.com what am i doing wrong?
View 9 Replies
View Related
Feb 27, 2011
Yesterday I updated Windows 7 x86 to SP1 and today found out that all my local virtual hosts has stopped working. First, I checked apache service - it was ok, but I restarted it. Then I tried to ping one of local domain names:
Code: C:Usersevgeny g likov>ping aaa1
Ping request could not find host aaa1. Please check the name and try again. I was thinking, SP1 setup just wiped all additions out of hosts file, but no:
Code: 127.0.0.1 localhost
127.0.0.1 aaa1
127.0.0.1 aaa2
[Code].....
View 6 Replies
View Related
Nov 28, 2012
I have tried to move the hosts file location by changing the registrykeyHKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParametersDataBasePathto the desired folder location.However, it appears that this key is somehow ignored by my system (Windows 7 64 bit) and the default location%SystemRoot%system32driversetc is still the one where the hosts file is read.I notice it because any changes made to the hosts file in the default location are detected (I check it with the ping command) and any changes to the new location are simply ignoredI have copied and pasted the hosts file with different values between the default and new folder, so I guess it is not a problem with the hosts file having the wrong format. I also copied and paste the new folder path to the registry key so it is also not a problem of having misspelled the folder path, either. I also restarted the computer after changing the registry key.
View 13 Replies
View Related
Jul 19, 2012
I removed Security Shield 2012 from my laptop which has Windows 7. All went well until I got to Step 23 in Bleeping Computer website (.../virus-removal/remove-security-shield). I deleted the HOSTS file and downloaded Windows 7 HOSTS file. However, I can't save it in the C:\Windows\System32\Drivers\etc\HOSTS file. I unchecked the hide system protected files but still can't find it beyond "drivers."
View 7 Replies
View Related
Mar 6, 2011
this morning I clicked on an image online and ended up with the My Security Shield infection. I successfully went through the removal process as recommended by bleepingcomputer - but have been unable to complete the last step - deleting the HOSTS file. I just went to the cmd prompt and typed in del c:\windows\system32\drivers\etc\HOSTS and was denied. What should I try next?
View 3 Replies
View Related
Oct 3, 2011
I've recently restored my Windows 7 Home Premium 64bit OS on to a new SSD using Macrium Reflect. My hosts file has always contained entries for local websites and has always worked until now. After much hair pulling and reading of forums, the only way that I could get the DNS Client to read and process the hosts file was by adding the "NETWORK SERVICE" user permission to it. It already had "SYSTEM", "Administrators" and "Users" (my user account). This was never required before, so I'm confused as to what has happened to require it now?
View 2 Replies
View Related
Oct 27, 2012
my notebook desktop icon all change to Microsoft word icon also the extensions change to LNK file (.lnk) except my computer and recycle bin icon, I used windows 7 ultimate x64?
View 2 Replies
View Related
Jul 27, 2010
A co-worker must have changed the file associations for ".LNK" shortcut files. All the shortcuts on her desktop are now the wrong icons and all try to start Windows Media Player, when clicked on. I'd like to change the file association for .LNK files. It seems straightforward to change this. I go to Control Panel, then click "Associate a file type," then find the extension, which is listed; "LNK"The problem is: What do I change it to? It's a shortcut, so it's for different applications. On other computers, says "Unknown Application" and that works fine. However, now that it's set to something, I can't find any option that lets me set it back to "unknown" or delete the wrong association. How do I set the right association for "LNK" file types, or otherwise fix this problem, for Windows 7 Professional?
View 3 Replies
View Related
May 19, 2012
A friend told me that I can delete the host files and get some of my bandwidth. Is this true? Would windows eat some of my bandwidth? (regardless if its the Host Files or not,) ofcourse winupdate is excluded in this question... If so, what steps should I take to maximize my connection?
View 1 Replies
View Related
Sep 10, 2011
I'm trying to centralize the Hosts file onto a network hard disk for a group of computers at my work place. However, the HKLMSYSTEMCurrentControlSetServicesTcpipParametersDatabasePath registry item appears to be ignored by WIndows7. So far, after hours of researching on the Internet, and experimentation on one Win7 machine (Home Ed.), I have come to a personal conclusion that Windows7 does not support the DatabasePath anymore, and the existence of DatabasePath is either a left-over or backward-compatibility for apps and programs. I have found on the Internet only one (ask&ans) post on Aug/24/2011 that directly asks about both Win7 and the fact that the DatabasePath registry value being ignored. From the Internet, it seems that the problem with relocating the Hosts file happens mostly with Win7 (and works fine with WInXP), and any problems in the other Windows versions are mainly due to errors of some kind with either the registry's DatabasePath, or the Hosts file, or security authorization. In my experiments, I used a temporary folder in my 'c' drive to hold the test Hosts file, and I verified the following points:
-My test Hosts file does work as I've copied and tested it in the WindowsSystem32driversetc folder.
-No matter what the HKLMSYSTEMCurrentControlSetServicesTcpipParametersDatabasePath is set to in the registry, Win7 will always read the Hosts file in c:WindowsSystem32driversetc even after a reboot or "ipconfig /flushdns."
-I could MOVE the etc folder to the Windows folder, set DatabasePath to c:Windowsetc (or even %SystemRoot%etc), reboot, and Win7 will still try to find 'Hosts' in c:WindowsSystem32driversetc, after which Win7 operates as if the Hosts file was empty. (After verifying that Win7 will not load the Hosts file from c:Windowsetc, moving the etc folder back to c:WindowsSystem32drivers, and either rebooting or issuing an "ipconfig /flushdns"--without changing the registry--will reload the Hosts file table properly.)
-On the chance a program was interfering, I did a clean boot (using msconfig to prevent loading all non-system programs at boot-up), and Win7 still tried to read a c:WindowsSystem32driversetchosts file when DatabasePath was pointed somewhere else.
-The registry really is case-INsensitive.
View 9 Replies
View Related
Jun 25, 2012
Would like to know if its possible to change the computer name using a bat file, on Windows 7 64bit.
View 8 Replies
View Related
May 31, 2011
Ok, I don't know why this happens....I have word documents saved on my computer on a few back up drives. I recently went to go into them and they are now .cts files.
I found that if I download and run Crazy Talk software, I can access them, well, from what I read on the internet. I am trying it out now.
View 4 Replies
View Related
Dec 29, 2011
i am trying to use a recording program and it automatically cuts my recordings down to 4gb and this is only about 1.30min.
View 7 Replies
View Related
Sep 1, 2012
I'm just posting here because there are these video files which the title of the file is different to the 'name' of the file which appears below the icon. Although not the end of the world, it is annoying since when I put the files on my external HDD to play through my PS3 and that shows the title and as they all have the same title I can't tell what I am watching.
View 2 Replies
View Related
Jul 6, 2011
So I'm trying to change the icon of a particular file type. i.e., pdf icon is gone for some reason so I want to put one there. All i can find on the net is 'open up file types manager' but how it will be done? I am using Windows 7 x64 home premium.
View 9 Replies
View Related
Nov 24, 2012
I've got this folder. In this folder are 643 sub-folders. I want to change the icon of all of those folders quickly, because doing it manually would be horrible.
Each folder has to have it's own icon. Not all the same one.
Currently the .ico's are in a folder with all the exact same name as the folders they need to be matched with. (if I sort by name, they'll all be in the exact same order, if that helps anything)
example: Mainfolder/A/ needs to have icon "A.ico"
So I've been kinda searching around and it seems things like this can (or not) be done with a batch file, and the desktop.ini. Or something..
View 2 Replies
View Related
Dec 24, 2010
Let's say, I am moving a file from a folder to another or changing a file's name.These changes do not show in Explorer unless I right click and select refresh.Has this happened to anyone?
View 4 Replies
View Related
Feb 19, 2012
It appears windows does not cnform to the standard method of calculating file sizee.g. the standard value of 1GB is 1000MB, however windows uses 1024MB. As such it is not in fact a "Gigabyte" But a "Gibibyte". This is extremley annoying, as for egxample, I have a 2TB hard Drive, which in the settings tells me is:2,000,263,573,504 bytes, this is correct, however it also tells me that the hard drive is 1.81TB when it should say 2TB. Is there any way I can change windows's calculation method for file sizes? So that 1TB = 1,000,000,000,000 bytesinstead of 1,099,511,627,776 byte which is a TiB (or tebibyte) This is probably a very stupid question and pointless
View 1 Replies
View Related
Feb 1, 2012
i just recieved my computer back from service because my hard drive needed to be replaced. i did not notice this until just now, but my system user name was not changed back to the default "user" after they had finished the service.so my question is, how do I change the file name of my Windows 7 user folder? im talking about the one in C/Users. one is called "public" and the other one - which should have a lock next to it, it the one I want to change. I do not want this file to be called "[tech support person's name]" but either "user" or my own name.I have changed one user name via Control Panel/User Accounts/Change your account name, but it did not rename that file.Is it wise to rename this folder, or am I just stuck with a random person's name as the name of my user file?
View 2 Replies
View Related
Aug 21, 2010
I performed a successful clean install of Windows 7 Home Premium 64 bit. I installed the OS to a 100gb volume with the intention of using that only for the OS. I, without thinking, allowed the setup to name that drive C. Further, without noticing I allowed the Programs folder and the Users folder to go into this volume. I intended for everything but the OS to go into a large second file named E. My thinking is that the only way that I can fix this situation is to do a new clean install and get it right this time (as much as my limited knowledge will allow. how to rectify this. ntel e6600 Core 2 Duo @ 2.4 GHz Noctua NH-U12P CoolerASUS P5QOCZ Reaper 2X2GB DDR2 800 (PC 6400) EVGA GeForce 8800GTS 640 MB WD 250GB GB SATA II Corsair CMPSU 550W
View 4 Replies
View Related
Dec 22, 2010
Is there a way to change MS Word file icons in Windows 7 x86. Since i know it has been possible on XP under view file options menu, and the same option is not available in 7?
View 4 Replies
View Related
Feb 16, 2011
I can't seem to change some (but not all) music file details even when I have the ownership. I have Windows 7 Home Premium 64 bit. I have done all the usual stuff. Right clicked on Properties, gone into Security, checked I have Full control. I have then gone into Advanced and changed the ownership to myself and still nothing. The only thing I think is strange is that there seems to be several entries in the Security tab on properties, and for that matter in the Advanced bit, of users/groups with similar titles all connected with me. For example 'steve (steve-PCsteve)', which is the one I usually use for ownership.
Also 'Administrator (steve-PCAdministrators)', which has ownership of a few files. Last is 'Users (steve-PCUsers)'. The is also 'Authenticated users', 'SYSTEM' and on one file I found 'WMPNetworkSvc'. All of these are usually listed on the Security tab and usually in the Advanced section. I have managed to change some music files to my ownership and change the details but not all. I have all my music on an external hard drive and on my C drive. Don't want to loose such a briliant collection now do I.
View 1 Replies
View Related
Jan 15, 2013
Downloaded 15 mp3 audio files for learning English from British Council website. 13 files show beautiful artwork on the Windows Explore and Media Player as well same with the one on the webside. Howeer 2 files shows Windows defualt image of eighth note. I can not see any information about the icon in the property of the file
View 4 Replies
View Related
Jan 31, 2011
About 2 days ago I noticed that all of a sudden my scroll and progress bars, and all of the prompt windows (save, open file, etc.) changed to a Windows 98 style! I didn't think anything of it until I tried to save an image through Firefox and it wouldn't bring up the prompt to choose a location. Initially I thought it to be exclusive to Firefox, but later I had worked on an Word document and when I tried to Save As... the exact same thing, a flash indicating that it tried to open the location window and that's it. Every program does the exact same thing, no way to bring up a location menu or change directory.
View 1 Replies
View Related
