basic system details:- PC:Intel. Core i7CPU 975 @ 3.3Ghz (not overclocked) Total CPUs 4 x 2=8...12 GB DDR3 RAM - Hard drive (1000.20 GB). Dual boot -Windows XP Pro SP3 (86 - 32 bit) Win 7 Pro- SP1.. 64 bit Graphics: 4 x NVidia GeForce 295..Sound-Creative GTX I have hosts file installed but at each boot into Win 7 (not when booting into XP), I get a message telling me that Hosts file manager cannot verify my hosts file, do I wish for new hosts file to be installed [yes or no] replying YES I get new hosts file installed and another pop up question "Do i want my additional entries addded [yes or no] with YES, my additional entries are restored to the new Hosts file. This all happens even if I have just installed a new edition of hosts file , my latest being Sept 5th.
Yesterday I realized my hosts file went missing. This happened within the last week. UAC is on and my computer is clean so I assume this wasn't caused by malware, but I'd like to know what program did this. Is there any sort of log I can access that will show me that information?
I didn't find a hosts file in the SysWOW64 folder, but I did find one in the "usual" place windowssystem32driversetc and I see it's NOT set to read-only. But when I try to edit it with notepad and save as "all files" rather than .txt (to avoid notepad giving it a .txt extension) it fails to save. It tells me I don't have permission (even though my user account is an administrator).
Is there some reg trick to allow me to change it? I've got a bunch of mappings I want to put in there.
I've got a browser search redirect imbedded somewhere in my hosts configuration but can't find the file to edit it out and hijackthis cannot fix it. The c:/windows/system32/etc/hosts is merely a sample and it's not buried in the registry. Where is the file that contains this rubbish?
Changes I've made on windowssystem32driversetchosts file are ignored by web browsers like IE, Firefox on Windows 7 x64.
On the other hand, ping command seems aware of hosts file. It gives the output of 127.0.0.1 for web addresses which are opened by web browsers normally.
I followed the instructions on this page: url...I renamed my hosts file "hosts.orig", downloaded, unzipped, and saved another hosts file from url... named HOSTS in the same place as the original. After that, I couldn't connect to the internet at home or at the library. I tried deleting the "new" hosts file that I downloaded, in order to put things back to how they used to be, but any time I try to do something to the "HOSTS" file I get a pop up saying: "The action can't be completed because the file is open in Cryptographic Services.... close the file and try again" which doesn't work. I tried stopping the DNS thing, but that only worked for about 5 minutes. I restarted the computer because it was slowing down, and the DNS thing restarted itself, and the internet disconnected again. I try stopping it, but an error message saying "Windows could not stop the DNS client service on local computer. error 1053: the service did not respond to the start or control request in a timely fashion"
Windows 7 64 bitI went to the Microsoft website and reset the hosts file. (I just copied the text on the page that said it was for the Windows 7 hosts) Prior to the hosts reset, the only text in there was 120.0.0.1 localhost. Anyone know what this means? This happened one other time before, so it has to be something.
I am trying to modify the hosts file so that it will block certain websites.I tried the following code, but it does not seem to do anything when i visit the website (as in, the page loads normally):Code: 127.0.0.1 asite.com what am i doing wrong?
Yesterday I updated Windows 7 x86 to SP1 and today found out that all my local virtual hosts has stopped working. First, I checked apache service - it was ok, but I restarted it. Then I tried to ping one of local domain names:
Code: C:Usersevgeny g likov>ping aaa1
Ping request could not find host aaa1. Please check the name and try again. I was thinking, SP1 setup just wiped all additions out of hosts file, but no:
I have tried to move the hosts file location by changing the registrykeyHKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParametersDataBasePathto the desired folder location.However, it appears that this key is somehow ignored by my system (Windows 7 64 bit) and the default location%SystemRoot%system32driversetc is still the one where the hosts file is read.I notice it because any changes made to the hosts file in the default location are detected (I check it with the ping command) and any changes to the new location are simply ignoredI have copied and pasted the hosts file with different values between the default and new folder, so I guess it is not a problem with the hosts file having the wrong format. I also copied and paste the new folder path to the registry key so it is also not a problem of having misspelled the folder path, either. I also restarted the computer after changing the registry key.
I removed Security Shield 2012 from my laptop which has Windows 7. All went well until I got to Step 23 in Bleeping Computer website (.../virus-removal/remove-security-shield). I deleted the HOSTS file and downloaded Windows 7 HOSTS file. However, I can't save it in the C:\Windows\System32\Drivers\etc\HOSTS file. I unchecked the hide system protected files but still can't find it beyond "drivers."
this morning I clicked on an image online and ended up with the My Security Shield infection. I successfully went through the removal process as recommended by bleepingcomputer - but have been unable to complete the last step - deleting the HOSTS file. I just went to the cmd prompt and typed in del c:\windows\system32\drivers\etc\HOSTS and was denied. What should I try next?
I've recently restored my Windows 7 Home Premium 64bit OS on to a new SSD using Macrium Reflect. My hosts file has always contained entries for local websites and has always worked until now. After much hair pulling and reading of forums, the only way that I could get the DNS Client to read and process the hosts file was by adding the "NETWORK SERVICE" user permission to it. It already had "SYSTEM", "Administrators" and "Users" (my user account). This was never required before, so I'm confused as to what has happened to require it now?
I am using a genuine windows 7 ultimate 64bit on a Fujitsu sh560 and I have recently updated various drivers (a complete list is below) from the Fujitsu website itself. These were intended for my laptop model and have been verified by my computer. I installed them all at once before restarting my system. Upon logging on to my computer, I notice that windows aero doesn't work and neither does my internet, my sound system, and my fingerprint scanner. I can not roll back any drivers, I cannot use recovery, and i cannot start any services without getting an error message of 1068. I then went to task manager and it has a completely depleted list of running processes from my previous startups.
Drivers updated: Audio driver by realtek Modem driver by atheros Chipset driver by Intel Fujitsu BIOS driver Fujitsu camera driver Biometric Device driver by authentec
I'm using Internet Explorer 9 and I've been trying to download a file I need. However, it keeps giving me the message "The publisher of this program couldn't be verified", with options to "Open" the file (which doesn't work because it's an incomplete file; I guess it blocked the download), "Learn more..." which is useless and "Cancel". There's no option to download the file, even though I know I can trust it and it's a file I want.
A friend told me that I can delete the host files and get some of my bandwidth. Is this true? Would windows eat some of my bandwidth? (regardless if its the Host Files or not,) ofcourse winupdate is excluded in this question... If so, what steps should I take to maximize my connection?
I'm trying to centralize the Hosts file onto a network hard disk for a group of computers at my work place. However, the HKLMSYSTEMCurrentControlSetServicesTcpipParametersDatabasePath registry item appears to be ignored by WIndows7. So far, after hours of researching on the Internet, and experimentation on one Win7 machine (Home Ed.), I have come to a personal conclusion that Windows7 does not support the DatabasePath anymore, and the existence of DatabasePath is either a left-over or backward-compatibility for apps and programs. I have found on the Internet only one (ask&ans) post on Aug/24/2011 that directly asks about both Win7 and the fact that the DatabasePath registry value being ignored. From the Internet, it seems that the problem with relocating the Hosts file happens mostly with Win7 (and works fine with WInXP), and any problems in the other Windows versions are mainly due to errors of some kind with either the registry's DatabasePath, or the Hosts file, or security authorization. In my experiments, I used a temporary folder in my 'c' drive to hold the test Hosts file, and I verified the following points:
-My test Hosts file does work as I've copied and tested it in the WindowsSystem32driversetc folder.
-No matter what the HKLMSYSTEMCurrentControlSetServicesTcpipParametersDatabasePath is set to in the registry, Win7 will always read the Hosts file in c:WindowsSystem32driversetc even after a reboot or "ipconfig /flushdns."
-I could MOVE the etc folder to the Windows folder, set DatabasePath to c:Windowsetc (or even %SystemRoot%etc), reboot, and Win7 will still try to find 'Hosts' in c:WindowsSystem32driversetc, after which Win7 operates as if the Hosts file was empty. (After verifying that Win7 will not load the Hosts file from c:Windowsetc, moving the etc folder back to c:WindowsSystem32drivers, and either rebooting or issuing an "ipconfig /flushdns"--without changing the registry--will reload the Hosts file table properly.)
-On the chance a program was interfering, I did a clean boot (using msconfig to prevent loading all non-system programs at boot-up), and Win7 still tried to read a c:WindowsSystem32driversetchosts file when DatabasePath was pointed somewhere else.
whenever I open docx file there is hidden file ~$name of file.docx created. which type of file is that? Is it in virus, maleware. for example If I open house.docx file then ~$house.docx file created which is hidden form. I had saw this file when i select show all hidden file option. when i try to open ~$house.docx file it show message the file is corrupted and cannot be open.
I installed Win 7 and if i try to open my computer of click on desktop and open up screen resolution etc. I get "Explorer.exe -Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item." I did a search but could not find anything related to this error in Win 7. I have found some others attached to Win XP but have to do with the installation of some software which prevents access to explorer.exe. When I boot in safe mode this issue does not appear...
After doing a copy and paste, we have, on 3 occasions so far, found the copied data in an entirely different file. Twice data from a copy appeared in an excel spreadsheet and once a picture copied in facebook appeared in an email. The excel problem is very worrysome as it is our family budget. how this could happen? In the case of the excel events no paste operation was intentionally done.
How to create a batch file that will move files based on the file type?My Requirement : I need a batch file to copy all .doc files in all my HardDisk to aremovable disk say (Z: drive) . Can anyone make it possible using a batch file
How to force Windows 7 File Explorer to display ALL audio folder content as normal files in detailed view with file name/size/date and without title/artist/album.
Whenever i take a file and put it onto the my desktop, all the permissions to the file is completely stripped. Leaving none able to open the file.I am able to go into access control and add myself again, but it makes no sense at all..
I am running Windows 7 32-bit. I have a perl script which i want to start everytime computer starts. Setting it as service will be a good option as i can start and restart the service from command line.In windows XP I was using srvany.exe but that is not a good solution. Is there any way I can make this Perl Script which takes in some command line arguments as windows service. Tried using sc.exe, with that service is created but it fails to start.To run that perl script i run on command line:Quote: perl PesrSclipt.pl --arg1 Hello --arg2 Buddy --arg3 Good
The problem I believe is that on the �change sharing options for different networkprofile page (Control Panel>Network sharing) I cannot turn on the Network discovery and File saring options. click on the two enabling buttons forTurn on File DiscoveryndTurn on File & printer sharing I then find the save changes tab greyed out
I had completed a beautiful 82-slide PowerPoint presentation, but the wav file I embedded was HUGE (about 200 MB) and not to my choosing. I just had to have the music a certain length to span across 82 slides. Is there ANY WAY to reduce the size of this music wav file (so that it conforms to the 50 MB max file size for PowerPoint). I would rather embed this music file than to have a link.
So I found a post on this forum with a similar problem. I'm trying to move a file that is larger than 4GB in size from my main hard drive to an external, and getting the error message in the title. The consensus on the other post was that the hard drive must have been a FAT format, and that too fix the problem either split up the file or reformat the hard drive as NTFS.Well, by all accounts, my computer is telling me that my external hard drive is ALREADY formatted as NTFS, but I'm still getting this error. I would prefer not to split up the file, but other than that, what are my options?
I'll give an example: two files, names 1st_file.avi, 2nd_file.avi, nearly same size, at different locations. Now I deleted 1st_file.avi and 2-3 weeks after deletion, I open 2nd_file.avi (which wasn't deleted) and find that instead of the original 2nd_file.avi, the contents of 1st_file.avi are being played.How can the contents of 1st_file.avi mapped onto the the contents of 2nd_file.avi?
I tried to save a file and got an error on saving it, so I quit the program. The file appears as if it was never saved and doesn't show up in directory listing (GUI or cmd.exe).
However, if I try to rename any other file to that filename, it says "Cannot rename file, because file exists" and appends a number to the end. I cannot remove the number. This happens both in the GUI and cmd.exe as well.
So, basically cmd.exe del says the file does not exist, but ren says a duplicate file name exists....
I have no idea how to delete that "ghost" of a file so I can actually use the filename. I checked folder options and it's not a hidden file or anything like that - it just (doesn't) exist, but it does?
