How To Slipstream Drivers Into Windows 7 Install
Mar 9, 2011
I have found that the drivers for my video card are non-existent when Setup goes to perform the initial boot, causing my monitor to lose signal after the Windows Logo. Anyways, I have found that my best option (possibly the only one) is to slipstream my NVIDIA drivers into the iso install and then reinstall the OS. I am unable to get into safe mode on the Windows 7 install due to Setup not completing the initial boot process. Either way...Does anyone happen to know how to Slipstream drivers into my Windows 7 iso while using XP? I have found numerous ways on how to do it while using Vista, but not much can be found on how to with XP.
View 2 Replies
ADVERTISEMENT
Nov 26, 2012
I purchased a new SSD and doing a fresh install. I am curious if it would be easier or ideal to create an installation disk/usb with all the added windows updates and drivers for my system(if possible)? Originally I had Windows Vista Ultimate and then upgraded to Windows 7 Ultimate. So, I have the original install disk for Vista and an upgrade disk for 7. I will also have 3 other HDD's installed, if it matters.
View 6 Replies
View Related
Aug 7, 2009
So like half the world I got RTM from MSDN yesterday, with hopes of installing today. Well for the past 10 hours I have been trying to get this OS installed on a Asus M4A79T Deluxe motherboard with the AMD SB750 RAID drivers and unfortunately I have come upon some woes that I hope you all might be able to shed some light on.In the RC the drivers were not present, as is the case with the current RTM, the process I would have to go thorough is as follows: 1. Click Next at the Language select screen 2. Click Install Now at the Install screen 3. Accept Terms and Next 4. Choose Custom install 5. It is at this point where I run into the lack of a driver with the RC, no drives are listed at theWhere do you want to install Windows?screen. 6. Click Load Driver 7. A message box pops up indicating To install the device driver needed to access your hard drive, insert the installation media containing the driver files, and then click OK.It is at this time that I click Browse 8. The browse for folder menu pops up and I navigate to my USB drive (have used a CD in the past) and select the AMD AHCI Compatible RAID Controllerand click Next At this point everything is good, the driver gets loaded and I continue on my merry way with the install of the RC.
The RTM, however, is much, much different: 1. Click Next at the Language select screen 2. Click Install Now at the Install screen 3. (unlike the RC, no terms yet) It is at this point where I run into the lack of a driver with the RTM, thus a Load Driver popup comes up indicating A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash device please insert it now. This is similar to what happened in step 7 above. It is at this time that I insert my USB key and click Browse 4. The browse for folder menu pops up and I navigate to my USB drive (have used a CD in the past) and select the AMD AHCI Compatible RAID Controllerand click Next 5. About five minutes of time and I receive the following error: No new devices could be found. Make sure that the driver files are correct and located on the driver installation media.Excuse me...what? The drivers are right there! I have them highlighted! So I click OK on the error popup and choose Browse again to repoint to the driver....but wait...WHAT? WHAT WHAT WHAT? All of my drives on the RAID controller are now showing up in the Browse box, indicating that the driver has been loaded!No matter how many times I try and click Next (not that clicking it a bunch of times is going to change anything) I cannot proceed in the install.
View 9 Replies
View Related
Mar 19, 2010
How to Slipstream SATA drivers into Windows XP setup CD with Dual Boot of Windows 7 or Vista ?
View 0 Replies
View Related
May 2, 2009
I have the Intel Q45/Q43 Express Chipset on my Asus P5Q-EM DO motherboard. Video drivers installed with Windows Beta 7057 worked perfectly but when I clean-installed Windows 7100 RC, the drivers were updated to a newer version and now my desktop and background video gets totally corrupted after computer is in use for 20 mins or so. If I minimize and then maximize the window I'm working in it clears it up for a few minutes.
Can anyone tell me how to take the graphics drivers from 7057 and slipstream them into 7100 RC so I can use the RC without pulling my hair out? I tried to "upgrade" the drivers to the old version, but no way to do that. And it has no rollback feature.
View 3 Replies
View Related
Jul 19, 2011
how to get win xp slipstream oem operating system to install on win7 as dual boot. as AHCI enabled. i am using Dell inspiron N5010.
View 1 Replies
View Related
Oct 14, 2011
I was wondering if it would be possible to slipstream SP1 plus post-SP1 updates into an All in one Windows 7 ISO that includes all editions of Windows 7 x64 and x86 architectures.
View 4 Replies
View Related
Jul 5, 2010
I would like to know if there are any tools that can be used to slipstream windows 7. The windows 7 consumes around 8 to 10gb in full installation and i am unable to create a test environment because it takes around 45 minutes for a fresh installation.
View 1 Replies
View Related
Mar 29, 2012
Is there a way to slipstream SP1 into a Windows 7 Home Premium 64-bit for Dell?
View 4 Replies
View Related
Mar 23, 2012
I'm going to be doing a clean install, as I'm getting an SSD soon, and I want to know how, if possible, I would put sp1 on my windows 7 iso to preferably install 7, along with sp1, and if possible, all of the updates for my computer.
For the record, if I simply have to download the sp1 exe from microsoft, extract it, and put the files on the iso, I know how to do that just fine.
View 4 Replies
View Related
Oct 11, 2011
I made a decision several months ago to slipstream a minimal copy of windows onto my laptop (32bit)I took out WMP from it, I've been trying all sorts of methods to get it back. IE sfc /scannow and the app FixWin,I can't seem to find a way short of reinstalling to get WMP back on here, since its missing from programs turn on/off windows features also.
View 7 Replies
View Related
Jan 30, 2012
I'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
View 5 Replies
View Related
Jan 10, 2012
During the installation process of Windows 7 it is possible to load drivers, e.g. the downloaded SATA, LAN and Graphics drivers for a specific motherboard (MoBo ASUS P7P55D).However, these files are compressed zip files and Unzipping delivers a set of folders with in each a number of files. Which are the device drivers?
View 9 Replies
View Related
Dec 1, 2009
I have a simple question, I recently fresh installed Windows7 and was wondering if I should Install the new mobo drivers from the ASUS site (i have an ASUS P5Q Pro) or should I just keep the current microsoft drives for all the chipsets/lan/etc. The only Thing I installed was the Realtek sound driver. Would there be any advantages to install proper drivers? because right now my computer runs perfectly stable and smooth using the Windows7 ones.
View 5 Replies
View Related
Dec 14, 2012
how would i be able to install drivers for another PC to boot from the install that was made on another PC
View 1 Replies
View Related
Jun 12, 2011
I am trying to install Windows 7 Professional onto a computer from an 8GB USB drive.I can boot from the USB fine but when it asks you choose where you want to install Windows it can't find any drives and it says I must load a driver. This is strange because if I put the hard drive into another computer it will install Windows perfectly.I can see the HDD in the BIOS but it just can't see it when installing Windows. I have a Western Digital 320GB HDD. Any ideas what's wrong, or perhaps where I can get a driver for it? I have looked on the WD website but couldn't find anything.
View 4 Replies
View Related
Jan 8, 2012
iv bought a new windows 7 disc home prem full vers 64 frm currys and am gettin that dreadd dvd missing drivers prob i got its a new build using a gigabyte m68 mt s2 mobo phenom ii x4 960 8 gb ddr3 two sata hard drive one dvd rom ide to sata converter but try days playing with bios settings bout 30 install attempts 32 and 64 im bout to try a usb dvd rom but im on tight budget cant keep trying to guess wat to buy to fix never smokd sm much in my life iv been tempted with the stairs but cant destroy lol to mak matters worse iv got a fresh new copy of battlefield 3 lim
View 1 Replies
View Related
Jul 7, 2010
got updated graphics/raid controller card drivers on a thumb drive. can I insert a thumbdrive with graphics card/raid controller drivers when it asks, or will this cause problems?
View 7 Replies
View Related
Sep 18, 2010
How do i get windows 7 to NOT install automatic drivers ?
I am getting ready to do a clean install of windows 7, but i want to install my own drivers ! How do i make this possible ?
View 9 Replies
View Related
Nov 15, 2011
i have a gateway computer that i want to load windows 7 pro 64-bit on. i want to do a clean install. will my computer DSL be able to connect on-line so i can download 64-bit drivers? also will my chipset and monitor work before i can download drivers for it too?i'm not sure if things will work before drivers can be installed
View 2 Replies
View Related
Mar 24, 2011
I have a Dell Latitude C600 laptop that had been running Windows XP, system crashed, (unmountable boot volume problem) so I installed Windows 7 Pro. install fine after reformatting. But now I have no sound & no connections. Says unable to locate network adapter, controller , Ethernet, PCI CardBUs drivers not found. Tried to install Zoom x6 modem but laptop can't find it.
View 4 Replies
View Related
Nov 6, 2011
I am currently on Windows 7 Home 32-bit, trying to re-install to Windows 7 Professional 64-bit. I have downloaded Win7 Pro from Microsoft's MSDN academic alliance, as I can get it free through my University. [CODE]
View 2 Replies
View Related
Oct 19, 2012
I have an older printer and a new laptop.
I downloaded the Windows 7 64bit drivers for my new laptop off the HP website and the setup goes well all the way to the end when I connect the printer and wait for it to go through the driver install process. I get to step 7 of 8 and it stalls out for quite a while. When it finally completes it says that the install failed. The driver is not installed. I tried this several times. Even completely uninstalled the printer and reinstalled. I then ordered the disk from HP and tried to install directly from it but I got the exact same problem.
View 12 Replies
View Related
Jul 10, 2009
Is there some sort of trick i'm missing? I used compatibility mode, and tried the "have disc" trick under device manager with no success.
View 3 Replies
View Related
Dec 30, 2012
I have an HP laptop, and it will not boot up.Have tried safe mode, repair, everything. But no go.So right now I am reinstalling Windows 7 from the original CDs.After I get that done, I have the drivers CD. So, my question is what is involved in doing that installation?
View 2 Replies
View Related
Oct 23, 2011
How do I install my email
View 2 Replies
View Related
Dec 31, 2011
I've spent the afternoon building my new pc. My DVD Drive is an HP dvd1260i. When I put the windows 7 disk in and try to install it, I get the error "A required CD / DVD drive device driver is missing." The drive did come with a disk that includes Nero burner and on the front says includes drivers, but windows still won't recognize it.
Here is my build:
Part list permalink / Part price breakdown by merchant
CPU: AMD Phenom II X4 960T Black 3.0GHz Quad-Core Processor ($109.99 @ Newegg)
Motherboard: Asus M5A97 ATX AM3+ Motherboard ($95.14 @ Amazon)
[Code].....
View 6 Replies
View Related
Jan 5, 2012
how to install drivers in windows 7 in laptops. previously i have installed LINUX
View 3 Replies
View Related
Mar 9, 2012
i just recently out together my computer before i get down to business heres the specsgigabyte 970a-d4 amd fx 4100 black editionkingston 4gb ramwestern digital 500gb hard driveverything is brand new. i also have windows 7 home premium 64 bit, my bios is detecting my hard drive, i spoke to gigabyte and helped me get it set up. and to windows install, the lady was quick to get off the phone with me, but i have called microsoft, and gigabyte multiple times and no help. when i try to install its the normal no drivers detected insert driver disc etc etc, i do and still doesnt find anything. what else should i try 2 people have told me to reformat the hard drive honestly i dont know how to do that. others said it should detect it and dont know why its not finding the driver ive searched here and no solid answer. i checked the connections and its good bios is
View 2 Replies
View Related
May 6, 2012
When we install windows 7 all drivers are present in one CD only or not
View 1 Replies
View Related
Jun 6, 2012
Have used my usb to install 12 tablet but the 13th one is stubborn with message "windows 7 wont install, needs cd/dvd device drivers" Trid all possible, no show. Whats next?
View 1 Replies
View Related
