I purchased a new SSD and doing a fresh install. I am curious if it would be easier or ideal to create an installation disk/usb with all the added windows updates and drivers for my system(if possible)? Originally I had Windows Vista Ultimate and then upgraded to Windows 7 Ultimate. So, I have the original install disk for Vista and an upgrade disk for 7. I will also have 3 other HDD's installed, if it matters.
View 6 RepliesI have found that the drivers for my video card are non-existent when Setup goes to perform the initial boot, causing my monitor to lose signal after the Windows Logo. Anyways, I have found that my best option (possibly the only one) is to slipstream my NVIDIA drivers into the iso install and then reinstall the OS. I am unable to get into safe mode on the Windows 7 install due to Setup not completing the initial boot process. Either way...Does anyone happen to know how to Slipstream drivers into my Windows 7 iso while using XP? I have found numerous ways on how to do it while using Vista, but not much can be found on how to with XP.
View 2 Replies View RelatedSo like half the world I got RTM from MSDN yesterday, with hopes of installing today. Well for the past 10 hours I have been trying to get this OS installed on a Asus M4A79T Deluxe motherboard with the AMD SB750 RAID drivers and unfortunately I have come upon some woes that I hope you all might be able to shed some light on.In the RC the drivers were not present, as is the case with the current RTM, the process I would have to go thorough is as follows: 1. Click Next at the Language select screen 2. Click Install Now at the Install screen 3. Accept Terms and Next 4. Choose Custom install 5. It is at this point where I run into the lack of a driver with the RC, no drives are listed at theWhere do you want to install Windows?screen. 6. Click Load Driver 7. A message box pops up indicating To install the device driver needed to access your hard drive, insert the installation media containing the driver files, and then click OK.It is at this time that I click Browse 8. The browse for folder menu pops up and I navigate to my USB drive (have used a CD in the past) and select the AMD AHCI Compatible RAID Controllerand click Next At this point everything is good, the driver gets loaded and I continue on my merry way with the install of the RC.
The RTM, however, is much, much different: 1. Click Next at the Language select screen 2. Click Install Now at the Install screen 3. (unlike the RC, no terms yet) It is at this point where I run into the lack of a driver with the RTM, thus a Load Driver popup comes up indicating A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash device please insert it now. This is similar to what happened in step 7 above. It is at this time that I insert my USB key and click Browse 4. The browse for folder menu pops up and I navigate to my USB drive (have used a CD in the past) and select the AMD AHCI Compatible RAID Controllerand click Next 5. About five minutes of time and I receive the following error: No new devices could be found. Make sure that the driver files are correct and located on the driver installation media.Excuse me...what? The drivers are right there! I have them highlighted! So I click OK on the error popup and choose Browse again to repoint to the driver....but wait...WHAT? WHAT WHAT WHAT? All of my drives on the RAID controller are now showing up in the Browse box, indicating that the driver has been loaded!No matter how many times I try and click Next (not that clicking it a bunch of times is going to change anything) I cannot proceed in the install.
I was wondering if it would be possible to slipstream SP1 plus post-SP1 updates into an All in one Windows 7 ISO that includes all editions of Windows 7 x64 and x86 architectures.
View 4 Replies View RelatedI have the Intel Q45/Q43 Express Chipset on my Asus P5Q-EM DO motherboard. Video drivers installed with Windows Beta 7057 worked perfectly but when I clean-installed Windows 7100 RC, the drivers were updated to a newer version and now my desktop and background video gets totally corrupted after computer is in use for 20 mins or so. If I minimize and then maximize the window I'm working in it clears it up for a few minutes.
Can anyone tell me how to take the graphics drivers from 7057 and slipstream them into 7100 RC so I can use the RC without pulling my hair out? I tried to "upgrade" the drivers to the old version, but no way to do that. And it has no rollback feature.
How to Slipstream SATA drivers into Windows XP setup CD with Dual Boot of Windows 7 or Vista ?
View 0 Replies View RelatedI have 5 updates that fail to install. I have also tried to manually install them, but they still fail Here are the updates:
KB2586448
KB2572076
KB2564958
KB2567053
KB2579686
The error code I get is "800736B3". I ran MS FIXIT and it said they did not detect any problems.
Windows Updates continues to re-install five specific updates which are:*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2604121) -Download size: 38.5 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368) -Download size: 1.8 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656405) -Download size: 11.7 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2686827) -Download size: 4.3 MB.*Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2600217) -Download size: 32.2 MB.- I purchased my computer 4 to 5 months ago. It is a Windows 7 Home Premium Hewlett-packard HP Pavilion dv6 Notebook PC (64-bit Operating System).
View 3 Replies View RelatedI'm going to be doing a clean install, as I'm getting an SSD soon, and I want to know how, if possible, I would put sp1 on my windows 7 iso to preferably install 7, along with sp1, and if possible, all of the updates for my computer.
For the record, if I simply have to download the sp1 exe from microsoft, extract it, and put the files on the iso, I know how to do that just fine.
I made a decision several months ago to slipstream a minimal copy of windows onto my laptop (32bit)I took out WMP from it, I've been trying all sorts of methods to get it back. IE sfc /scannow and the app FixWin,I can't seem to find a way short of reinstalling to get WMP back on here, since its missing from programs turn on/off windows features also.
View 7 Replies View Relatedhow to get win xp slipstream oem operating system to install on win7 as dual boot. as AHCI enabled. i am using Dell inspiron N5010.
View 1 Replies View RelatedI would like to know if there are any tools that can be used to slipstream windows 7. The windows 7 consumes around 8 to 10gb in full installation and i am unable to create a test environment because it takes around 45 minutes for a fresh installation.
View 1 Replies View RelatedI am part of a large organization that has a large amount of computers on our domain controller. I have Administrative rights to the computers only, and network access rights on our network. I keep a number of computers up to date, including various 3rd-party programs (i.e. java, flash, etc), and I currently manually remotely connect to each computer and install the updates to the programs from a network share, then run Windows update, select all the critical updates (as well as all the applicable optional updates), then disconnect and move on to the next one. Needless to say, time quickly adds up.
View 3 Replies View RelatedIs there a way to slipstream SP1 into a Windows 7 Home Premium 64-bit for Dell?
View 4 Replies View RelatedFor the past day windows wants to install the same 4 updates over and over, I have windows update set to download and let me choose when to install.
I can't understand why I even need them, as I uninstalled net framework. Notice how the update at 8:17 AM., KB2656368, is the same as one of the 4 updates installed at 7:47 PM. Windows wants to install the same four kb files again.How do I stop this?
Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368)
Installation date: 6/15/2012 7:47 PM
Installation status: Successful
[Code].....
I have Windows 7 Home Premium installed on my PC. Every morning when I boot up my computer I get a message " Preparing to configure Windows. Do not turn off computer." and on shut off "Installing Update 1 of 12" This repeats every day so it's obvious the system is not taking the upgrade I did a search but can't find this specific problem.
View 8 Replies View RelatedI made a thread a few days ago about not being able to install a specific update. Now I've discovered I cannot install ANY updates. I've tried disableing my anti-virus, firewall, tried manually dling the update from M$, even tried installing the updates on a newly created admin account, and no luck. Does anyone have any idea what could be causing this problem?
View 14 Replies View RelatedMy computer downloaded updates for my Laptop. Upon restarting to install the updates it reaches a point and can not install certain updates. All it shows is fatal error.Every time i switch off the laptop and restart it, it re-installs but on reaching that particular point, an error code is created.
View 3 Replies View RelatedI have windows 7, my updates won't install, tried to install maunelly from website, still got errors, reinstalled windows, updates are still not installing.
View 1 Replies View RelatedWhen I try to install updates on my PC through the automatic updater it downloads the updates fine, but then when I restart it tries to install them for about 5 minutes and stays at 0% the whole time. When I log on all it says is "Windows could not install updates".
View 7 Replies View RelatedI have updates waiting to install. When I choose to install I get the "preparing to install" screen, but nothing happens after that.
View 5 Replies View RelatedIn Windows 7, when the Shut down button has an exclamation point on it, it installs updates before shutting down.How can I see what updates it is going to install before I shut down?Can I turn this option off so it only installs updates when I select?
View 6 Replies View RelatedJust got this new Acer aspire, windows 7 laptop and keep getting same error message when trying to install updates:' Windows update encountered an unknown error. 2 updates failed and were not installed - error codes 643 and 74F'.
[code]....
I've tried installing certain ones, even some ones at a time, but the results are the same. Download complete. Please restart. But the update never happens and I don't get an error message.
View 12 Replies View RelatedWindows 7 updates have not been installing recently - All the latest set of updates that have been offered attempt to install and then they stop - I attempted to install one at a time but this is no help either
View 14 Replies View RelatedWhere to start? Several weeks ago I installed a windows update & then my Bullguard firewall wouldn't start. I got remote assistance from Bullguard & they succesfully restarted my firewall.Since then I have permissions issues, I have tried changing my status from admin to standard but the standard option is greyed out. I have tried setting a new user account but that also will not let me apply any changes without a password which I don't have. Also when I go to All Programs this is empty?My other problem is my windows security updates faill to install ( error 8000ffff) I have looked at different solutions online & used microsoft fix it but all to no avail. I have 19 updates to install but they constantly come back with the same error.
View 1 Replies View Relatedif you install for example a security update for internet explorer 8 before having internet explorer 8 installed (lets say i have 7) could it cause problems?(and after installing the security update of ie8 install ie8)
View 3 Replies View RelatedI'm running Windows 7 64-bit and there are some updates I can't install. It loads to 15% then it says "failure configuring updates, reverting to old setup", or something similar. First I had 8 updates when this started happening but I managed to install the security updates by selecting them exclusively. I have have tried deleting my updates folder and download again but same thing happens. Is there a fix for this? It's annoying when my computer reboots because they can't be installed.These are the updates in question:
View 3 Replies View RelatedTried installing the updates individually and from the Microsoft Download Center. I also ran Microsoft FixIt, but that didn't help. I have been able to install other windows updates with no problems at all, but I can't download them. I believe that there is still a rootkit on this computer so I think that it may be the source of the problem. I have tried to remove the rootkit in the past, but I am not going to buy a whole new version of windows because of the rootkit.
View 9 Replies View Relatedi just installed windows 7 on my computer, but when it starts downloading the service pack and other updates it doesn't download them at all
View 7 Replies View RelatedBasically my issue is when I install a Windows update, it installs then I go to shut down the PC and it installs before shutting off. I then go to pack on my PC and the update is back again, I have repeated this several times and It is still there.The update is:Security Update for Microsoft XML Core Services 4.0 Service Pack 2 for x64-bases systems (KB954430)
View 3 Replies View Related