Clean Install Of Windows 7 And Drivers?
Dec 30, 2012
I have an HP laptop, and it will not boot up.Have tried safe mode, repair, everything. But no go.So right now I am reinstalling Windows 7 from the original CDs.After I get that done, I have the drivers CD. So, my question is what is involved in doing that installation?
View 2 Replies
ADVERTISEMENT
Jan 30, 2012
I'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
View 5 Replies
View Related
Nov 15, 2011
i have a gateway computer that i want to load windows 7 pro 64-bit on. i want to do a clean install. will my computer DSL be able to connect on-line so i can download 64-bit drivers? also will my chipset and monitor work before i can download drivers for it too?i'm not sure if things will work before drivers can be installed
View 2 Replies
View Related
Jul 25, 2012
I built a new computer yesterday and when it came to installing Windows 7 it says no drivers found. Everything is hooked up properly, but I'm not sure how to fix this. Not sure if my specs will help, but here they are.
asus sabertooth z77
evga nvidia gtx 670
corsair hx750w
i5 2500k
8gb corsair vengeance
corsair force series gt 120gb ssd
View 3 Replies
View Related
Nov 16, 2011
I am getting ready to put a clean windows 7 op sys on my dell machine. I wanna make sure I have all necessary drivers I need. Is there a quick way to do this? Or do I go in device manager and get driver and go to manufacture website to get updated drivers for windows 7 one by one?
View 1 Replies
View Related
Nov 16, 2011
i am getting ready to put a clean windows7 op sys on my dell machine. i wanna make sure i have all necessary drivers i need. is there a quick way to do this? OR do i go in device manager and get driver and go to manufact website to get updated drivers for windows7 one by one?
View 2 Replies
View Related
Apr 3, 2011
I do the Windows 7 Clean install and now I cant delete or add folder or file in to some folder or drivers they ask administrator permission. How can I change that and there is unknown security members also !!!!
View 3 Replies
View Related
Aug 29, 2012
I assembled a new computer using:
Windows 7 64bit Pro SP1 OEM System Builder Pack
Gigabyte H77M-D3H
1TB SATA HDD WD Caviar Black
Intel Core i3 2125
DDR3 8GB 1600 Intel Viper
SATA LG Blue Ray DVDRW
Clean install of Windows reveals an error not detecting any drives, does not allow partitioning or formatting. BIOS identifies the drives.I've attempted installs of updated drivers from the motherboard's website (as well as the CD that came with the motherboard). WD claims not to have any drivers on their website. Still nothing.
View 6 Replies
View Related
Mar 30, 2012
I did a Clean re-install of Win 7 on an HP but forgot to save drivers. Now I can't get online to download them. Wen I did the re-install it created a folder called old windows, can I recover the drivers from that?
View 9 Replies
View Related
Sep 20, 2009
I've been searching for an our or so all over trying to find something that helps me with this problem, but nothing seems to be working. I have an HP dv6780se Pavillion Laptop.
I put a new hard drive in it to restore and the restore disks are working correctly. It will install windows vista, but then when it starts installing all the bloatware the computer restarts and says OS not found.
So, I figured I'd install windows 7 since I was planning on doing it anyway.
My problem now is that I'm wondering since restore disks only install vista and don't finish the other hp stuff that the drivers aren't getting installed for vista...hence when I try and do a clean install of Windows 7 it says no drivers found. Any idea what I can do to get my install going?
View 9 Replies
View Related
Dec 18, 2009
Ok, i built a "whitebox" for a friend at work and they wanted to windows 7 64bit. So, i built the machine and have been trying to figure out how to get it to recognize the HD for the past 4 hours... mainly thanks to Samsung for making impossible to find drivers on their website for the Spinpoint F1 HD102UJ 1TB hard drive and i am also having problems finding drivers from the Gigabyte website... Anyway, suggestions? I gone through all the suggestions about checking the BIOS for RAID settings, but there is only 1 drive in this machine.
Furthermore, after trying to find the drivers online for about 2 hours...i ended up reformatting the drive from the utility disk that samsung had on their website..
View 9 Replies
View Related
Nov 19, 2012
I did a windows 7 clean install on my HP Mini 210 4051 nr as part of creating a dual boot with Ubuntu. In Linux the internet works fine, but in Windows 7 it does not. In the device manager I see yellow flags over the ethernet and network controllers. Code 28 (My model does have an ethernet port).
Because the machine cannot connect, I downloaded all the related drivers (everything from the network tab) from the HP website for my model with another computer and then put them all in a folder on the Mini's desktop via USB. When I try to install the drivers through the device manager, and direct it to that folder, it says it finds nothing usable.
Here are the IDs
Ethernet Controller
PCIVEN_10EC&DEV_8136&SUBSYS_338D103C&REV_05
Network Controller
PCIVEN_1814&DEV_5390&SUBSYS_163610C&REV_00
View 1 Replies
View Related
Dec 23, 2011
I've a samsung with some extra samsung features (samsung update plus, speed up manager, recovery system etc.) and they bug me. Therefore I wanna do a clean installation on my laptop but when I boot up on my USB (works fine) I get the following message "No device drivers were found ..." instead of having access to the partition manager.Btw., I've tried the to boot other laptops with the USB stick and it works like a charm. I read somewhere that the problem could be that my laptop didn't load the SATA drivers, which is needed for the partition manager, that might be the problem but I don't know where to find the drivers though.Furthermore I've noticed that I can't see my USB drive when I browse for files only C:/ (system disk), D:/ (primary), E:/ (some recovery disk) and X:/ (boot)?
View 5 Replies
View Related
Feb 13, 2013
I am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..
View 3 Replies
View Related
Feb 3, 2010
Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
View 3 Replies
View Related
Jun 29, 2010
I have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
View 9 Replies
View Related
Jan 31, 2010
I'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:
Intel Core 2 Duo 3.12 Ghz
nVidia GeForce 9800 GTX 512 MB PCI-e
320 GB Western Digital HD SATA
1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM
I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.
edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.
View 9 Replies
View Related
Apr 6, 2012
i've had enough of 7, I use my PC for music and after months of installing/uninstalling/re installing/researching/driver checking etc. i've decided i'm just not going to get things working with 7.
I have my XP disc and i'm ready to do a clean install, but i'm struggling to get it going... what do I do!? Inserting the XP disc brings up the autopay but the option to install is greyed out, which I understand as it's a step down. However, when I press f12 on booting to try to boot my pc from disc it just locks on the boot menu. What can I do to get a clean install of XP going?
View 14 Replies
View Related
Jun 18, 2012
I have been having numerous problems over the past wk. The firewall won't stay on, can't do windows updates etc. I have run Vipre as my anti virus and also mbam and superantispyware and everything is coming back clean. Today I decided to just backup my documents etc and then do a clean install. Now the problem is that the DVD burner doesn't show up in the BIOS. It shows up in my computer and it's running fine. If I format it out of the computer can I get windows to install from that DVD drive?
View 2 Replies
View Related
Aug 10, 2009
i wanna Format my C:/ drive and Clean install Windows 7 beta..
im inserted W7 DVD and restarted my computer.. bt doesn't Boot From Windows 7 DVD .My first boot Devise is DVD rom.second Boot Devise is HDD...
View 9 Replies
View Related
Feb 26, 2010
I didn't notice until I tried 2 burns. Then I resorted to downloading elsewhere and after 3 more downloads I got the right file(verified by hash) for 64 bit Windows Pro English. Burned the iso to my thumb drive fine, seemed to install fine and fast on this system: [code] Have 2 500GB spinpoint F3s in raid 0 and 1(setup in bios correctly and in raid menu bios fine)190GB raid 0, 375GB raid 1 using Intel raid after mostly done with install it said it had to restart so it did, but since I used a USB thumb drive it tried booting from that again instead of finishing install. I redid the install after fixing partitions and it seemed to go fine this time I removed the drive when it restarted. I was actually finally in windows 7!After installing a couple drivers I needed I restarted then things went bad.Could no longer enter windows normally because once it loaded the screen went blank.It automatically installed gfx drivers but the monitor drivers aren't installed and I was incapable of installing them after 1-2 hours trying to figure out a way. Monitor didn't show up in device manager.Monitor is an Acer2051w.I could get into safemode and try to mess with stuff.I was able to uninstall video drivers then boot into windows normally but it would automatically install the same driver and I wouldn't be able to get back in again. Automatic driver installation was off by the way.
So I couldn't fix this so I decided to reinstall Windows 7. The install went through fine, said it had to restart to finish up and after restarting the screen would stay blank forever. Doesn't seem to be installing properly now.So I can't get it installed again, and when it was it wasn't working properly. I have the monitor drivers even but no way of installing them so Windows is screwing up setting a bad resolution/ settings for the display that I can't fix hence the blank screen issue.
View 4 Replies
View Related
Apr 11, 2011
I have a retail Upgrade DVD for Windows 7 Home Premium which I purchased. I did a clean install by wiping my hard drive using the format partition option on the Windows 7 DVD. I had Vista installed on the HDD before the upgrade so the installation program could "SEE" that I had a qualifying version of Windows to validate the upgrade key.Activation was successful.Now, I want to start a clean slate. However, I don't have Vista installed anymore, just Windows 7.Can I reinstall with an upgrade key on a blank, reformatted hard drive? Will activation pass?Or do I need to reformat with the installation program on the DVD?Finally, I made an image of my Vista operating system before I upgraded, do I need to restore the image so my Win 7 DVD can once again "SEE" the qualifying Windows version?There are forums out there that say different things, yes you can, no you can't, well it depends.
View 3 Replies
View Related
Apr 5, 2012
I have a new, 120gb solid state drive I want to install windows 7 pro, 64-bit on. Does windows 7 take care of whatever formatting is needed automatically? Does it let me pick allocation size and type of formatting (e.g. NTSF versus another type)?
View 5 Replies
View Related
Aug 10, 2010
I recently had my system crash after a bad update for my graphics card and I've tried to re-install windows a number of times and have had no luck.I have tried a few of the tutorials here and formatted my HDD to try for a new clean install. I get through the first part of the install, but once my PC reboots it keeps trying to load from the disk and then I get into windows boot manager. I try to select the start windows normally option and then I get an error message saying 'Windows failed to load because the system registry file is missing or corrupt'.I have the original windows X64 product disk.
View 3 Replies
View Related
Sep 21, 2010
I am about to migrate over to Windows 7 Pro this week, just waiting for a new video card. I have XP Pro (Sp3) now. I will be using a Win 7 Pro upgrade disk. I want to start with a fresh formatted HD, I will being using a second hd (D) with XP PRO installed, will I be able to use C, or must it be installed on the same HD partition(D)? I seem to recall something about having to be on the same partition.
View 9 Replies
View Related
Nov 7, 2010
if I am already running Windows 7 32 bit on a 2Core, can I suubsequently do a clean install of Windows 7 64 bit?
what are the main advantages of 64 over 32 bit?
View 9 Replies
View Related
Aug 1, 2011
I am preparing to do a clean install on my HP laptop, as the HP Windows 7 (that came from the factory) is bloated and messed up...So, I have backed up everything and am ready to insert the retail disk and install Windows 7. I am going to use the COA key on the bottom of the laptop. Using this key, during the installation menu, will it work fine and accept it? Will I have to call Microsoft
View 7 Replies
View Related
Mar 30, 2012
I just did a clean install of Win 7. I have the intel network driver so I'm online but that's it. I have no drivers or programmes at all. What to do next.Yes I forgot to do a backup. It did create an oldwindows folder.I have genuinely activated my Win HP.I have a HP Dv7t 64-bit.
View 6 Replies
View Related
Sep 29, 2012
i have tried to install windows 7 on a brand new HD and it comes up with:"windows setup could not configure windows to run on this computers hardware" i have tried 3 times and still get the same error message. i have put the HD into another machine and installed windows 7 successfully so it can't be the new HD- the recovery disks appear to have no surface damage.i have previously installed windows 7 on new HD's on this machine before using the same recovery disks with success-what has gone wrong this time? is my computer damaged somehow? before i put in the new HD my computer was infected with a virus but this could only damage the old HD?
View 9 Replies
View Related
Apr 27, 2012
If I do a clean install of windows with preformace in mind what secuirty would you include? Just windows firewall with microsoft essentials? Would that be enough? Its a labtop on wifi (home) but I may be taking it other places at some point. I feel like avast is a great anti virus but I dunno if its possible to just run it once in awhile? Its always loaded. It seems bog system down. im also having other issues from random restarts and such freeze. Anyway what would be enough? Just make sure I don't run into the same problems (of like conflicting programs) messing up windows. Malware (installed) Microsoft essentials running all time and windows firewall is this enough? Or would it be better to just install one all in one program like.
View 6 Replies
View Related
Jan 11, 2009
How to Do a Clean Installation with Windows 7 ?
View 0 Replies
View Related