I want to re-install Windows 7 64 bit.( because of Cyberlink 8 and various files by multiple users being locked, which are separate issues). I have the disc and legit activation key.I have a 1 TB hard drive right now. Out of all the programs and files, I simply want to save a few 200 gigs of videos that I have edited. However, I am unable to move them to my WD external drive ( another separate issue, LOL ) because Windows 7 does not recognize it nor WD have a driver for it.Anyway, can I backup those completed files on a part of internal hard safely, and then perform a clean reinstall Windows 7 on the same drive? I've tried with the backup option but can't figure out how to do it. The box only give me options to save on my disc drives. In addition, I must be absolutely certain my 200 gigs of video will be safe.Again, the Win 7 must be a clean install. I want to BLOW UP EVERYTHING that is left except for my 200 gigs of video.
PS- I am trying to transfer by wireless on my home network to my laptop. Estimated time, 3 days.
I have a Dell XPS laptop. I reinstalled windows a weeks ago using an oem disc.Since then i have notice my sound sometimes stops working. I would like to reinstall to factory. I booted and pressed f8 then clicked repair windows. At the repair menu the dell factory reinstall option is missing.
I have been running Win 7 and XP Pro in dual boot per Method Two of this tutorial, without any problems.When I tried to install SP1 of Win 7, it crashed and went back to the previous Restore Point which isworking OK for now. BUT--Windows Installer is now broken so I can't install anything from Windows Update,including taking another crack at SP1. Can I clean-reinstall Win 7 on its partition without hosing down XP?After the install I plan to run EasyBCD to re-connect XP to the initial boot menu. Does EasyBCD handle the writing of NST tldr and boot.ini to the right spots? Or do I have to save them somewhere?
ASUS M5A97 (AM3+) Mobo AMD Phenom II X4 945 2 x 4GB G-Skill Ripjaw DDR3 RAM PNY Nvidia GeForce 460 GTX 1GB A 1TB SATA HDD (can't remember the brand) A 160GB SATA HDD
My issue is, I'll try to boot into Windows 7 Ultimate x64, not a new installation at all, and I get the "Windows is Starting" screen and the little colored balls, but after a few seconds I get a very very quick blue screen and reboot before Windows even loads. There's no way I can read the blue screen error.So I thought, "Let's just do a startup repair." That didn't work; it said: Quote: Root cause found:The partition table does not have a valid System Partition
Repair action: Partition table repair Result: Completed successfully. Error code = 0x0 Time taken = 20632ms
So I pop in the Windows 7 installation DVD; it tells me there are missing CD/DVD drivers. I point it to the Windows 7 drivers directory on my primary HDD, it still can't find anything.So I load up my copy of MSDaRT. Some tools load, but it tells me "Tool requires a supported offline OS" under many of the tools, and the ones that do start won't do anything at all because they can't "see" my Windows 7 installation. I have an external HDD reader, but I'd rather not have to wipe everything and do a clean reinstall. Maybe trying to fix the partitions with a G-Parted on an Ubuntu Live CD or something?
I installed Windows 7 RTM 7600 on a new hard disk (previously not partitioned), so I have had the 'system reserved' partition created at Windows 7 initial installation time. I have several of problems with Windows 7, so I would like to reinstall it, but by keeping programs and files. The problem is that the Install file setup.exe looks into 'system reserved' partition rather than checking the C:/ hard drive, and as such does not want to proceed with the reinstall because of a lack of disk space (100 Mo only on 'system reserved' partition)...
- How could I do so making the install looking at C:/ rather than at that partition? - And during the reinstall could I do so that this partition is not created anymore?
I have a Sony Vaio VPCEC4SOE I bought cheap - needs a new screen.After purchasing first thing I done was a Reinstall of windows using F10 on boot up and following instructions.However after all finished Task manager showed 90+ processes at idle and the amount of bloatware was more than I had ever seen included with any PC.So, Made up a Windows 7 Install disc as I wanted to go for a totally fresh install. Once installed it asked for product key - I checked underneath and half of the sticker is missing (I know I should have checked before hand!) Plus thinking about it after I really don't think the product key can be reused even if it is on the same machine (can someone confirm?)I now have a nice clean operating system, but no product key, that will self destruct in 27 days! So I would like to return to VAIO factory state. I have checked and recovery partition is still there and intact - 13gb, but how can I reinstall from this partition? F10 now does nowt on boot up.
I just got a new MB/CPU and want to do a clean install of my OS. Currently I have two partitions on my HD, one for the OS and one for all my data. Can I just format the OS partition and do a clean install on that partition of the new OS? I just don't want to lose all my data files. I have most backed up, but would take the entire day to backup the rest probably.
When I installed Windows 7 on to my new laptop I think I did it on to the wrong partition as there is still a 30GB freedos one.Can I merge it with the partition Windows 7 is installed onto as it is getting full?I don't want to have to reinstall Windows again.
I'm building a new computer. Can I partition the hard disk, copy my laptop HD to boot from one partition and run a new windows 7 pro os from the second partition?
I currently have a dual boot on my computer with Windows 7 and XP. Unfortunately as my computer is quite old my hard drive is not very big and with it being partitioned I am fast running out of disk space. So I tried to shrink the XP partition to allow me more disk space for Windows 7. Unfortunatley this would only let me shrink it by 83mb for some reason. I decided that since I barely use XP anymore that I would simply reformat the XP drive then try and merge them together. When I tried to format the partition it just gave the error "Windows was unable to complete the format". I then discovered in Disk Management that the Windows XP partition was the system partition which was causing the problem.
I install Windows 7 64 bit in a 60 gb partition of my HDD (C drive). I have about 200 GB free space in D drive. Now I want to make a 60 GB partition from the free space of D drive.
I created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.
I'm a long-time reader but new poster. I am currently running Windows 7. I want to install Windows XP onto another disc and have a dual-boot setup. I keep Windows 7 up to date and secure, but for the XP partition, I would rather not have antivirus running or even installed, in order to limit background processes. I will not be logging into any place or making any credit card purchases when booted into Windows XP. It will just be used for surfing, games, etc. Further, if and when XP becomes compromised or buggy, I will simply overwrite the partition with a backup image.
If I use Bitlocker to lock down the Windows 7 partition (with the encryption key on a thumb drive) and boot into Windows XP, am I correct in thinking the XP installation see or can't access the Windows 7 partition? If XP gets compromised, can a virus access or write to the Windows 7 partition?
Is there any other reason why this would not be secure? Can a virus write to the BIOS?
I wanted to create a new partition to try out linux. So I decided to shrink E: by 20 GB. I then formatted the free space into a new drive by right clicking and creating new simple volume. I was warned that the drive would be made "simple", but not knowing the implications, I went ahead with the procedure. Now on rebooting, windows won't load. I had made a repair disc, so was able to use it to check for any start up errors. It reported none. Moreover I used "diskpart" through cmd to find volume c: is dynamic.
I had my friend Dell Laptop. He want me to create a two extra partitions in existing primary partition which is C:The HDD is 1TB in size.One hour ago I had used Dell data backup program and created recovery discs and then formatted the Laptop to factory default. I thought before formatting it will give me options to create a partitions but it did not had any option.
I'm using Compaq Presario CQ40-627TUMy Laptop SpecIntel Dual Core Processor T4400 (2.2GHz, 80Mhz FSB,1 MB L2 Cache)- 2048MB 800MHz DDR2 Memory- 320GB 7200rpm Hard Disk Drive- 14.1' TFT WXGA High-Definition widescreen LCD panel with brightviewtechnologynd i'm using windows 7 Ultimate on boot system partition C, dual boot with linux mint. which mean i got four partition. one for linux mint. one for its swap space. one for windows 7. one for my data storage(movies,drivers,mp3,picture and etc).last few days i try to resize my C partition (120gb) to make it smaller to gain some unallocated spaces and resize the D partition because my D (almost 100gb) (ntfs/primary/data storage) almost full. i use easeus partition master v5.01.
After done resizing and restart i can't see any D partition. so i was worried that my data will disappeared. i try to look for it but there is no Drive D even on the easeus or diskpart. the only drive appears was C Drive.i remove my Linux Mint and its swap (60gb) and thinking that i could get some more free space and do some cmd prompt windows 7 repair fixmbr thing to remove the grub. then i use partition recovery to transfer those missing data from partition D to C Drive. (appears as unformatted)i try to use partition wizard home to resize it back to 300gb. and it works. but i cant make a partition. it will disappear just like that.i also try to use diskpart,command prompt diskpard, and paragon. but also not working. the C drive was shrink but theres no unallocated space and no D drive (the new create partition). i try logical partition,primary,ntfs and fat but also not working. even the unallocated space also gone. i use almost 4 3rd party partitioning software but still got no luck with it.example:i divide 300gb into 2 partition which exist the C partition 150Gb but the other one gone. i wish theres other way than format. i also done many time. doing check disk, partition table doctor, searching for bad sector. but no errors with my hdd.
I have Windows 7 ultimate 64-bit installed on DELL desktop (Optiplex 990) i7 Core. I have two HDD: Disk 0 contains the operating system 500GB. and Disk 1 empty 1TB.
I want to make a partition on disk 1 to mirror the operating system partition and keep the remaining for data storage. I tried to do but I had the following error message: "All disks holding extents for a given volume must have the same sector size, and the sector size must be valid."
I wanted to resize a partition, so I backuped all important files and booted from a vista PE CD. The program used is called "Easeus". After the resizing a message appeared, which told me that the system information couldnt be updated. After a restart, it - well, it didnt restarted. I tryed to format my C:Windows partition, but Easus decided to randomly format my linux partitin, too. Yey. After that i just formated everything, so i can create one big partition so this never happens again :P. To put it in a nutshel, there is no way to boot besides from booting from a cd. The diagnostic tool of the fabricator is giving me the "error code: BIOHD-3 No bootable drives detected" message.I tried to fix it with a win7 repair disk (just realized, that the disk is for 64bit, i have a 32 bit os - i think it doesnt matter, because there isnt any os installed at all). I used pretty much every "bootrec" command, sucessful, but no change. The startup repair gave this message: "the partition table does not have a valid system partition" diskpart - act isnt helping either: "The specified partition type is not valid for this operation."I dont know if i could install any os from a disk - i dont have a bootable installation cd/dvd. Because of that i would be happy if someone can tell me where i can find a free os and how i install it. From a os i can install my win 7.
I just cloned two partitions from a resident HDD to an auxiliary Momentus XL HDD in an enclosure that is connected to the computer via eSATA.Is there a way to compare each cloned partition with its original for integrity? If this were just a file, I'd use a unix/cygwin utility like diff or cmp.However, it is a partition.
I'm preparing a fresh install of Win 7 Pro on a 2 disk system (90GB SSD and 1TB HDD). I'll be placing the OS/Apps on the SSD and Data and image restore files on HDD.Qs:1. If I allocate ~60GB for the OS/Apps partition, and actual storage of the OS/Apps is 35GB...what size partition do I need on the HDD to save this image file? I assume the compressed file will be 45-50% of original. Will I want to store multiple image files created over the course of time as apps are added and system is further optimized, and hence need a partition that is a multiple of the OS/App partition size? What do you do?2. Also, an 8GB RamDisk will serve as scratch disk space for some apps (RamDisk +) which can save an image of the session's writes upon shutdown. I plan to save this image to the 2nd HDD. Is it recommended that I save this to same partition that stores the OS/App image in Q #1 above,
i have a hp laptap with a core i3 . with 8gig of ram. 500 gig hard drive. i made a 100 gig partion and it went to dynamic changing it back to basic. i read the mini tools application. if i tried that would it erase my hard drive if i went back to basic. all i wanted was a back up for my files.
Table top, Acer brand, Aspire M5700HDD: 500GBPart: 1. Hidden partition, 20GB, eRecovery2.Partition C partitioned by Acer, 240GB, OS3. Partition D partitioned by Acer, 240GBI plan to format both C and D partitions and make 4 partitions.So, check with Acer firstAcer's reply is confusing, saying that the hidden partition will be damaged if format C partition
I have started the installation process of windows 7 on a clean 1 TB hard drive. In order to ensure expediency of the read time of my primary drive, I choose the custom installation. When I did I partioned the drive as 250GB & 700GB. Hoever it also created a 100MB system partition on its own. It never did this in Vista. Is it suppose to do that?
I am trying to keep the size of Image Files as small as possible. I'm told that it helps to keep these files from getting too big if I move the Page File away from the drive being imaged - in this case , my C: bootable drive.
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
I recently acquired a 60GB SSD and want to migrate my current system hard drive to the new drive. However, when I go to the Windows Backup manager to create a system image, it wants me to copy ALL of C partition and ALL of D, when it should only be C.D drive is full of a bunch of crap that I do not want included in the system image.If there even are system files on D, by no means is copying the entire partition necessary!Therefore, is there any way to make partition D NOT a system partition?
I want to move win 7 installation to vista partition and extend partition 3 with freed partition 2.
-I though to do this
-Backup win 7 to external drive
-boot from cd installation
-choose to restore win 7 in partition 1
-After it boots correctly, resize partition 3 adding partition 2.
I realized that boot files are in partition 1, when I tried in windows 7 to backup system (partition 2) it want sto backup full partition 1, because it's part of system and partition 1 is considered critical.
I just spent the last half day fixing a laptop, had to buy a new hard drive and reinstall the OS from recovery discs. (Win 7 64 bit, on Satellite Toshiba) I just noticed that I did not install it with a partition for the OS, Is this going to be a big problem at some point? I had checked off "Factory Settings" when installing, I just assumed that it would have installed with a partition. Before I go any further with this laptop I would like to have some input please. I just spent the last 3 hours installing updates and finally SP1.
My computer was blue screening, freezing, locking up, etc so I took it to a repair shop and to make sure all the hardware was ok. All the tests passed but the problems were still continuing. They eventually decided to reinstall my OS which is Windows 7 and everything's been working fine except my computer is a lot slower and frequently feels laggy where they mouse would freeze up for a few seconds or move slowly across the screen. I have already tried cleaning out my registry with CCleaner and tried defragmenting but to no avail. I was wondering if there is another way to solve my computer lag problem.
