I've been playing some games and every time I press the mute, decrease and increase volumes always disconnects me from the games or bring me out of the game like Alt + F4. It use to be fine, but I think the reason is, because of the volume display bar pops up. Is there a way to remove it or you can solve my problem without removing it?
[SOLVED] I went to Control Panel > User Accounts and Family Safety > User Accounts > Change User Account Control settings and set it to the second notch.
I just received a new keyboard today: Thermaltake Challenger Ultimate. I went from a Logitech G15.
First thing I did was connect the keyboard and install the software that came along on the CD, it probably also installed the correct drivers. First after this did I uninstall the software and drivers from the old Logitech G15. But before that, and now after, the volume buttons on my new keyboard is still not adjusting the volume when I press them.
A speaker-icon like this shows up when I press the volume buttons, so its not that the keys are not working: (ignore the text behind it, its me writing an assignment)
I cannot control the volume on my laptop using the volume buttons on the keyboard. The only one that works is the mute button. How do I get those to work? (the laptop is new)
I've searched everywhere, including (when you click F1) in windows 7. I need a keyboard shortcut for increasing and decreasing volume, and I don't mean when playing a video or something, I mean the "general" one. (Not in Media Player)
within the last week - I installed a fresh copy of Win 7 x64 SP1 on a new office workstation. I am using the Logitech K800 keyboard and J.River Media Center for media playback.
NOTE: I am using the Gigabyte EP45-UD3R motherboard and it's onboard Realtek Azalia HD audio chip. I am NOT using the Realtek drivers (more on that in a moment) - I am using the built in Windows 7 HD Audio drivers.
Long story short - I discovered some conflicts with the internals of the motherboard where the front panel headphone jack of my case (Antec P182) would exhibit static in the phones if moving the mouse on screen. Traced that to some weird issue with the USB ports so I had to install a separate front panel insert into the case and attached JUST the audio cable so I could get static free headphone listening.
Now the issue. When using J.River Media Center (and WASAPI Event Style from within Media Center) and I select "speakers" under it's Device Output area - I am able to use the Mute, Volume Up and Volume Down hot keys on the K800 to control the audio level that comes from the speakers.
But - if I change the Device Output to Headphones - using the exact same audio device - suddenly the three audio buttons (upper right of the keyboard by the Calculator button) suddenly do not work.
Couple things - I cannot recall in any previous build whether or not these button were working or not OR if I just decided to try them for the first time with headphones. I don't use headphones often with this machine but when I did in the past...volume seemed fine...just can't remember if I ever attempted to control it via keyboard
Also - when wrangling with that static issue in the headphone jack...I did install the actual Realtek drivers for 10 minutes to see if it would make a difference. It did not. Knowing the history of the Realtek crap and how one can never uninstall it correctly - I am wondering if I now have a conflict with old drivers, old registry entries or something else that might be contributing to this issue.
how one removes SVI from a non-fixed USB disk? I have system restore switched off on this drive..shows zero on scale but the disk has 623mb of SVI information possibly from a previous restore point setting..not sure where it came from Not sure if indexing is on this drive Can I remove this information.
I removed the mirror for my 2 hardrive to reinstall Windows 7 & sp1. I am now unable to remirror(greyed out) or reformat that 2nd drive as it is still showing as a system volume partion.
is it possible to disable the volume that pops in the middle of the screen whenever i mute my pc, because when i'm playing a game with "fullscreen" and i mute, it exits(doesnt close the game just alt tabs) the game to the desktop thingy.
as described I use a Logitech G510 keyboard with multimedia keys and the posibility to insert a headset into it (the keyboard got its own soundcard). The keyboard also got a volume wheel which worked with Vista like it should: I could controle the speaker's volume by the keyboard.
Now with Win 7 I can't use the wheel anymore, even with the latest drivers.
My system: OS Win 7 professional 32 bit Intel core duo E4500 2,2 GHz; 2GB RAM Sapphire HD5770 graphiccard
I think my right-clicker on my laptop keyboard is either damaged or something's lodged under it that's causing it to stick. Does anyone know how I might be able to safely remove the clicker without damaging it to see what the problem might be?
When I press some keys, windows display incorrect both in Word, notepad, browser,etc... , such as press backspace window display '=', press enter windows display '' , click left arrow windows display ']'...I try to change region of keyboard but error still display. When I try to re-install Windows 7 professional 64bit, error un-display, all of keys display correctly. But error display again after I execute windows update automatically. So I think it is error of windows, maybe.
See my sig for my system description. Windows 7 64 bit OS. ASUS P8P67 Pro B3 motherboard. i7 2600k CPU. Whenever I put my system to sleep or shut it down, and it comes back on on its own (for example, Vipre anti-virus turns the comp on at night to run virus scans), the system boots up just fine, but the keyboard, mouse and display don't do anything. I can't get a response. So I have to hold down the power button for 4-5 seconds to shut the system down and restart. Then everything works fine again.The mouse is a Logitech wireless (USB). The keyboard is Logitech wired (USB) gaming. The display is ASUS hooked up via HDMI to my video cards
Some of the keys on my wireless keyboard produce something entirely different on the monitor. For instance, if I press Shift, and then 2 to get an @, I get a quotation mark on the monitor. Pressing the shift and quotation mark gives me an @. This thing is made in China. Is it wired wrong or do they not know English?
I am running Windows 7 premium. The taskbar/notification/clock area @ the bottom of my desktop is huge, like nearly an inch. The Time, Day and Date are one below the other. This takes up so much space especially when u have multiple toolbars, address bar etc @ the top not 2 mention the additional loss of space (of nothingness) @ the top. Leaves less working space than I'm happy with. How do I gain back the use of that half inch in the taskbar?Is it possible 2 gain back the lost area @ the top as well?.I have already gone to Properties and changed the settings there (use small icons). It made no difference at all.
why does shrink volume only display 350gb available to shrink out of a total of 703 gb on (C drive? the Hewlett Packard is fresh out of the box. it was partitioned with 200MB system files, the 703GB partition contains 25GB of files, 150MB partition unallocated. a (D drive HP created for emergency (nice feature). any suggestions on what to do with 150MB since it is so small (mb). windows 7.
so i have a blue yeti, and i'm an online animator/voice actor. whenever i record audio on my blue yeti (or any other mic) i record about 4-6 inches from the mic, and turn the gain down enough that the audio doesn't peak as i yell or whatever. this is what you're supposed to do if you don't want your audio levels peaking and making your recording sound horrible and corrupted. however, afterwards, it means i have really quite recordings. not a problem right? now that it's recorded right, i can boost the volume of the entire clip afterwards right? wrong. i'm not an audio expert so i must be missing something. but why in gods name would the audio distort and peak after it's recorded successfully? it's all there, it's all clean audio. if i turn the volume on my speakers all the way up it sounds crystal clear! all i want to do is do that inside the computer so that when i upload it to Internet people don't have to turn their speakers so far up. but if i increase the clips volume in the computer, it distorts! it sounds awful! why?! i tried in sony acid and audacity and they both do the same thing! i can take sound effects, and recordings made by other producers and crank them up nice and loud, but mine just fall apart!
I bought a USB A4 Tech HU-200 HeadPhone Its volume is quite high even when the windows volume is at 0, When its at max 100 it works like dedicated speakers Is there any way to reduce the volume beyond the lowest volume of windows 7?
Note: My Headphone does not have any soft of driver or software
I recently got this problem, that my volume hotkeys stopped working, (Acer Aspire 5560G) AMD High Definition Audio. I also tryed plug in other keyboard that have's volume hotkeys but still doesn't work.
I like to listen to music loudly sometimes. I have both the volume mixer and my application's volume set to maximum levels, but it's not loud enough for my liking. Is there any way to increase the maximum sound volume in Windows 7?
A Compaq Presario CQ62 Laptop running windows 7. I accidentally spilled wine on it and the keyboard no longer worked.I purchased a Microsoft wired desktop 600, but it has no function keys. On the original keyboard I used Fn E12 to connect to a network, but with the new keyboard I can no longer connect to a network. There must be a workaround?
the display/monitor uses the generic driver for display and it is 1024×768 or 800x600 but it looks very odd it should be bigger because my screen is bigger. I have a acer monitor but is there something I can download to fix the display size?
Windows 7 64 turns off the monitor 1 signal after startup. At login, it powers off monitor 1 and powers on monitor 2. Windows 7 behaves as though dual display is working even though monitor 1 does not display. It's the same for single display, the monitor will not work on cable 1 except at startup.Both 'Extend these displays' in Windows Screen Resolution and 'Extend' in the Nvidia Control Panel is selected. And changing which one is primary does not turn on monitor 1. Nor does switching the position of display 1 in either (ex.left/right/top/bottom).GeForce 8400 GS; Dual Monitor Solution 59 pin (DMS-59) to 2 VGA adapter -tried two of these adapter cables.atest Driver: 306.23 - installed a clean reset install of the latest Nvidia driver released last week.Same Resolution: 2 of the 4 monitors I have tried have the exact same 'recommended' resolution (1280X 1024), both 60Hz, and even chose 16 bit color for both instead of 32 to reduce resources.
Linux worked: Dual display worked immediately when I tried it in Ubuntu 10. So, it's not the hardware. It works in Ubuntu 12 too but not properly -it won't transfer windows across displays. My Windows 7 64 is an upgrade from Vista 64. One person in another forum with the same problem resolved theirs by reinstalling Windows 7. But another got the same problem only after a fresh clean install of Windows 7 64 with the same GeForce 8400 GS and DMS-59 when it had previously worked in Vista. Dual Monitors - Only One Works at a Time
my daughter pressed a couple of keys earlier and now my laptop keyboard isnt working properly. It is really strage because a few keys are working but not in thier usual function. My partner logged out so now i am sat at a login screen and cant key in a password. The on screen keyboard is behaving the same way which is very odd! Any suggestions? I have only had it 3 weeks and have had no problems it's been great. My mrs said she was trying to type in a website and windows kept popping up when she typed, and then she logged out.
I am attempting to uninstall (and then reinstall) Office 2010 Prof Plus. I am not able to remove it from Add/Remove programs, have read through some help info and attempted to use the Windows Fixit, Revo & Ripoutoffice2007, none of which have removed it (Revo didn't take it out and then pulled up a million 'left over' files, none of which I deleted).
