I have two audio jacks in the back of my computer. I just bought a headset today and no sound is coming through them and I just want to be able to play sound through the speakers and the headset at the same time. I'm using windows 7.
View 2 Replies
I have 2 speakers, nothing fancy. And a Sennheiser USB headset. Problem is when I set my default audio device to Realtek High Def Audio, my speakers work and my headphones don't. I have to manually set the default device to my headphones, but then my speakers don't work.
Is there a way to have audio through both?
I'm using a Creative Sound Blaster Audigy2 ZS Platinum sound card and an ASUS A8N-SLI Premium 939 NVIDIA nForce4 motherboard. This setup worked fine on WinXP with my Logitech headset plugged into the Mic slot on my sound card. Never had a problem and never had to mess with any settings.
Now, since doing a clean install of Windows 7, my Mic is picking up major feedback. If I happen to set the headset down or brush a finger along the actual microphone receiver, my speakers crackle and break-up.
When I was trying to fool around with the recording properties under Sound, the "What You Hear" device is the one picking up my mic. There's also a volume bar to the right of the sound devices where it shows sound coming out of the respective device. Whenever I have sound coming out of my speakers, I also have it showing up on the "What You Hear" device as well.
I normally use my headset in Ventrilo, and now whenever I talk, my mic also plays back anything that comes over my speakers as well.
Is this a driver problem or has anyone else had any similar problems? I've tried messing with multiple settings with my speaker settings as well as the "What You Hear" device with no luck. Any help or pointers would be greatly appreciated.
I've been having trouble since about 2 days back, my headset and my speakers worked just fine till i shut the computer down for the night. then the following morning there was just no sound, I kinda tried everything these days but nothing works...Anyway, I got a steelseries 3h VR headset and some kind of speakers, I know that they both work ( I tried it on my dads computer) so there's no problem with them i guess. I got windows home premium 64bit?
View 3 Replies View RelatedWhen I use my headset/mic for a teleconference, I can hear what others are saying in the call, but they cannot hear me. (I'm using Win 7/64-bit.)
When I use the same headset/mic on a computer running Win XP (sp3), everything works.
FYI, I purchased a second identical headset/mic, but I've gotten the same results with Win 7.
When I have my Headset plugged in the front of the computer, I find that I must unplug my Headset inorder to hear the External Speakers. Is there a way to get around unplugging the Headset plug? Afraid constant plugging and unplugging will wear out the connector and have to go inside of computer to replace the connector.
View 1 Replies View RelatedI installed the latest realtek ac97 drivers and so far my speakers (playback) and mic (recording) works just fine. Unfortunately I cant get the sound to playback through both my speakers and headset at the same time.
It only allows me to set one or the other as my default playback device, is there any way I can have both playback at the same time?
I bought a Crystal USB headset yesterday, it came with no directions, no disc, no drivers, there's not even a website listed. When I plugged it in Win 7 detected it as USB speakers. Even at 1% volume it is LOUD, I had to wear my earphones on my cheeks! I tried playing with the volume mixer, but even setting other applications at 1 didn't work. Those programs (games, etc) that had additional volume control inside the application were able to turn the volume down enough to use, but any additional sounds (system sounds, etc). Is there an additional USB driver I haven't found for Windows 7? or is there a way to force the OS to recognize the USB as a headset instead of speakers?
View 1 Replies View RelatedMy Speakers and Internal Speakers along with the Microphones are screwing up.This problem only started today, I haven't got a clue why and I haven't changed any settings whatsoever, Everything was working fine until one moment they weren't.I've gone into Sound to try and fix the issue, I set my Sounds as Default for the headset, and I still have them playing through both, and I did the same for the Microphone, only on that one.In Playback Devices, Speakers / Headphones is one and Communication Headphones is another, even if I disable the first, I can't get the second as Default for both, it won't let me have Default Device for only the Communication Headphones.Under Recordcing it's much the same issue except the first one is Internal Mic, it's allowed me to put the Microphone / Line In as Default, except it won't pick up sounds from the Mic, only the Internal Mic even if it's not enabled.
View 1 Replies View Relatedi have a usb headset that i use for gaming, but want to use the 3.5mm jacks on the back of my pc to run a pair of desktop speakers to play music or Internet, etc. i do not want to have to switch the default between the usb headset and the speakers, but to have sound coming out of both at the same time. is this possible with windows 7?
View 5 Replies View RelatedWhen I plug in my headphones, my speakers just keep on playing(although the headphones also play the audio). The headphones won't show up under audio devices, and I've tried two different sets of headphones.Does anyone know how to stop this? It was working fine yesterday.
View 1 Replies View RelatedI have a HP G62 series laptop with Realtek HD Audio Manager and an iSymphony NC1 Headphone with a male to male 3.5 mm cord connected to my audio output jack. The jack on my laptop is loose, but I can still hear sound coming from both sides of the headphones. The problem is that the internal speakers still play and the headphones don't show up on my devices menu or in the Realtek HD Audio Manager.
View 4 Replies View RelatedWhen I plug in my headphones, my speakers just keep on playing(although the headphones also play the audio). The headphones won't show up under audio devices, and I've tried two different sets of headphones.
View 2 Replies View RelatedI am trying to use 2 sets of the insignia NS-NBBAR USB sound bar speakers on my laptop simultaneously. Both Speakers are recognized independently and I can choose one or the other to run, but I can find no way to link them both. Is there any way to set these up to run this way?
View 3 Replies View RelatedI had an issue recently where I upgraded from OEM Vista x86 to Windows 7 Professional x86. There was very little sound coming from the internal speakers. I also had major BSODs from then, so obviously I was focusing my attention on the BSODs as a priority. That issue has been resolved, however, or, at least, I implemented a workaround - reinstalling Vista. I no longer have BSODs. The audio, however, is still extremely quiet. I've checked the following:
- Went into properties and maximised the 'levels' on everything.
- Went into volume mixer and maxed everything.
- Went into Devmgmt.msc and tried updating drivers - drivers already up-to-date.
I have two internal speakers as well as what I guess is a subwoofer (I'm terrible with hardware - its icon looks like a box server or something. I'm currently at work so I'll upload screenshots when I get home). Only one speaker plays at a time. I can change between the speakers by right clicking and saying "set as default speaker" and that plays sound out of one at a time with no problems, unless I choose the subwoofer(?). Is there a way to make both speakers play at the same time, instead of just using one of them?
I think it was working fine yesterday but today both are working at the same time.. I've tried rebooting but the problem still happens.
View 6 Replies View Relatedmy laptop's speakers and the headphone working at the same time.this problem i facing since i installed windows7.prevoiusly i used windowsXP but i didn't faced this kind of problem.
View 1 Replies View Relatedi am back again with a problem, actually not a problem. how to enable my laptop speakers and headphones at the same time. I mean both should make sound simultaneously.
View 9 Replies View RelatedI have an Insignia NS-NBBAR USB sound bar and the internal speakers of my Lenovo V570. I am trying to use both sets of speakers at the same time.
View 1 Replies View RelatedI have just installed my windows 7 ultimate 32bit on my computer. Then i installed Realtek AC'97 Audio sound drivers. I got my sound working and everthing but when any sound is played like music it plays through my headphones and speakrs at the same time.
View 6 Replies View RelatedI have searched alot on multiple forums regarding this! Its hard to believe that nobody has a credible solution to this simple problem!!I have dell inspiron N4030 and when i plug in headphone in the stereo jack , sound keeps on playing from both speakers and independent headphones at the same time!! This really is annoying! I have tried refreshing the driver software , have installed IDT HD audio drivers, still of no avail
View 1 Replies View RelatedI have an old desktop I'm thinking about turning into an HTPC. I currently have an Nvidia Geforce 8800GT videocard, which says it supports 1080P: PNY
I'm trying to determine what is the best way to hook it up to my HDTV, which has both VGA and HDMI ports. Should I get a DVI --> HDMI Adapter for best resolution / clarity?
Or is hooking it up via VGA fine, even though I doubt I will get full 1080P performance.
i got an aaxa m2 projector and im not sure how to hook it up to my computer with windows 7. In xp i know how change the settings to i can have an extended desktop, or duplicate desktop which the projector then acts as a 2nd monitor but in windows 7 im not sure.. Is there some hotkey combination that lets me toggle through the settings?btw projector is pretty nifty! all the more reason i need to figure out how to get it to work on my laptop not just my desktop.
View 4 Replies View RelatedI am trying to hook a monitor & keyboard up to my laptop for my wife (screen on laptop is too small). I can get it to show on the monitor, keyboard works, but I cant close the laptop without it going to sleep. I have gone into the control panel to change the power settings on what to do when the lid closes but it is greyed out. I am using the admin account but still cant change anything. Laptop is a Samsung RV511.
View 2 Replies View RelatedI have a new Dell Inspirion 5110 running Windows 7 Home Premium 64 bit and want to install my old Pp Deskjet 710C.
View 3 Replies View RelatedHow do I find security code so I can hook up my second laptop
View 1 Replies View RelatedI have a Dell XPS M1330 laptop and have recently upgraded to windows 7 professional (32bit) from windows vista. Everything seems to be running smoothly except I can get no sound from the internal laptop speakers. When I plug in external speakers in via the jacks on the front, sound comes through fine, but as soon as I unplug them there is nothing. Headphones also work like this too. Under sounds in device manager, it simply says 'High Definition Audio Device', and I'm not sure if I should be downloading some other drivers?
View 9 Replies View RelatedI have a Creative SB X-Fi Xtreme PCI-Ex, and Logitech Z-5500 5.1 THX speakers. All speakers work; all software, drivers and codecs are up-to-date. Recently I noticed that in the Speaker Setup screen, the test button only results in sound from the left and right front speakers.
I checked because after a VLC update, mkv files no longer played correctly in the 5.1 mode. Music played, but the voices were muted (while no speakers are muted, and all are connected). I have to select "2 front, 2 rear" Audio Device in order to hear the speech as well.
I have the same problem when playing movies in PowerDVD, where I have to select the 2-speakers setting in order to hear all the sound.
Note:
- Previously the test button did sound all 5 speakers
- The test button on the Logitech remote still sounds all 5 speakers
I have Windows 7 Professional, 32 bit.
only my front left and sub and main speaker work and if i put the cords in a different hole then only one will work and i got all of the in the right colour coded hole i have tride everything WHAT DO I DO!
View 2 Replies View Relatedmy computer doesn't recognize logitech speakers, it does show realtech are they the same?
View 3 Replies View RelatedAbout a month after I started using it, the Say the Time clock program I bought stopped launching the management menu when I right click the date/time field in the task tray (notification area).
Therefore, I can't use or edit the program. Neither the touchpad nor the cordless mouse works.
Other than this problem, my computer works great. Every single item that's meant to be right clicked works for me.
Is there a way I can generate a log to show the software manufacturer (Provenio) that it's their problem and not mine? I am a novice user but I can follow instructions. However, I don't want to put my computer at risk if I make an entry error.
I've been using computers for 18 years and I've never had this problem until I bought this software and used it for about a month.
I just wanted a conclusive way of putting the ball back in the manufacturer's court.
