When I have my Headset plugged in the front of the computer, I find that I must unplug my Headset inorder to hear the External Speakers. Is there a way to get around unplugging the Headset plug? Afraid constant plugging and unplugging will wear out the connector and have to go inside of computer to replace the connector.
View 1 RepliesI've been having trouble since about 2 days back, my headset and my speakers worked just fine till i shut the computer down for the night. then the following morning there was just no sound, I kinda tried everything these days but nothing works...Anyway, I got a steelseries 3h VR headset and some kind of speakers, I know that they both work ( I tried it on my dads computer) so there's no problem with them i guess. I got windows home premium 64bit?
View 3 Replies View RelatedUsing my headset when I talk on Skype/Ventrillo/Mumble, when I transmit, everyone can hear my computers audio. This isn't the mic picking up bleed from the headphones, they can actually hear everything I hear very clearly, whether its in game sounds or music. I have almost narrowed this down to either my Motherboard, or Windows 7.
Hardware info:
Motherboard : ASUS M4A79XTD EVO
OS - Windows 7 Ultimate 64
Soundcard - Creative Xi-Fi Extreme
Headset : Razor Carcharias
What I have tried:
- Uninstalled all Creative software, removed card from computer and activated on board sound instead.
- Activated both sound cards, plugged in the headphones into the X-Fi card, and the Mic into the on board.
- Made sure I have the latest drivers installed for both Xi-Fi and on board (creative driver is pretty ancient)
- Used a completely separate microphone not attached to the headset.
- Made sure all recording devices are switched off except the Mic.
- Tried every kind of input and output volume controls, adjusting these does not seem to make a difference.
- Made sure Stereo Mix is disabled (this option was only available when using the on board audio, not seeing this option for the Xi-Fi card)
- Listen to device disabled.
I've also tried 2 other headsets and issue still persists. Is there something I can do within Windows 7 to disable this from happening?
how can i set up my mic so i can hear over my speakers
View 1 Replies View RelatedSuddenly can't hear anything from speakers
View 1 Replies View Relatedi cant hear sound from my speakers
View 1 Replies View RelatedI just bought a pc, windows 7 32bit. I tried to use my headphones but couldnt hear any sound, also tried speakers still no sounds. The green bar goes up on the volume control tho. I have tried downloading some drivers, but they didnt work.
theres some audio ports at the back of the pc and at the front. both dont work.
I have 2 speakers, nothing fancy. And a Sennheiser USB headset. Problem is when I set my default audio device to Realtek High Def Audio, my speakers work and my headphones don't. I have to manually set the default device to my headphones, but then my speakers don't work.
Is there a way to have audio through both?
I'm using a Creative Sound Blaster Audigy2 ZS Platinum sound card and an ASUS A8N-SLI Premium 939 NVIDIA nForce4 motherboard. This setup worked fine on WinXP with my Logitech headset plugged into the Mic slot on my sound card. Never had a problem and never had to mess with any settings.
Now, since doing a clean install of Windows 7, my Mic is picking up major feedback. If I happen to set the headset down or brush a finger along the actual microphone receiver, my speakers crackle and break-up.
When I was trying to fool around with the recording properties under Sound, the "What You Hear" device is the one picking up my mic. There's also a volume bar to the right of the sound devices where it shows sound coming out of the respective device. Whenever I have sound coming out of my speakers, I also have it showing up on the "What You Hear" device as well.
I normally use my headset in Ventrilo, and now whenever I talk, my mic also plays back anything that comes over my speakers as well.
Is this a driver problem or has anyone else had any similar problems? I've tried messing with multiple settings with my speaker settings as well as the "What You Hear" device with no luck. Any help or pointers would be greatly appreciated.
I have two audio jacks in the back of my computer. I just bought a headset today and no sound is coming through them and I just want to be able to play sound through the speakers and the headset at the same time. I'm using windows 7.
View 2 Replies View RelatedWhen I use my headset/mic for a teleconference, I can hear what others are saying in the call, but they cannot hear me. (I'm using Win 7/64-bit.)
When I use the same headset/mic on a computer running Win XP (sp3), everything works.
FYI, I purchased a second identical headset/mic, but I've gotten the same results with Win 7.
I installed the latest realtek ac97 drivers and so far my speakers (playback) and mic (recording) works just fine. Unfortunately I cant get the sound to playback through both my speakers and headset at the same time.
It only allows me to set one or the other as my default playback device, is there any way I can have both playback at the same time?
I have a Dell XPS M1330 laptop and have recently upgraded to windows 7 professional (32bit) from windows vista. Everything seems to be running smoothly except I can get no sound from the internal laptop speakers. When I plug in external speakers in via the jacks on the front, sound comes through fine, but as soon as I unplug them there is nothing. Headphones also work like this too. Under sounds in device manager, it simply says 'High Definition Audio Device', and I'm not sure if I should be downloading some other drivers?
View 9 Replies View RelatedI bought a Crystal USB headset yesterday, it came with no directions, no disc, no drivers, there's not even a website listed. When I plugged it in Win 7 detected it as USB speakers. Even at 1% volume it is LOUD, I had to wear my earphones on my cheeks! I tried playing with the volume mixer, but even setting other applications at 1 didn't work. Those programs (games, etc) that had additional volume control inside the application were able to turn the volume down enough to use, but any additional sounds (system sounds, etc). Is there an additional USB driver I haven't found for Windows 7? or is there a way to force the OS to recognize the USB as a headset instead of speakers?
View 1 Replies View RelatedWhen I test mi microphone it will captured the sound of me moving my PC but when I speak it won't hear it.
View 1 Replies View RelatedMy friend's laptop has a weird problem. It was running vista fine, sound worked and everything. One day, the internal speakers randomly stopped emitting any sound. However, they do make sound effect sounds while the computer is booting.I figured it was a software problem, so he just reformatted and installed 7. Same problem. Makes the booting up noises, "Gamers Republic... BOOM", obviously coming from the internal speakers.
View 5 Replies View RelatedBasically i've just got my new laptop this week, had desktop pc's for nearly 10 yrs with internal sound card to power a 5.1 surround system now ive ordered some krk rokik rp5 g2 monitor speakers but i want to be able to play music from laptop with media player etc, through the monitor speakers at good sound quality.i no your can get cheap converters, but i imagine a usb sound card with rca outputs would be a lot better yes?budget around �70 or so. heard creative aint that good for music, more gaming, films, and been told m-audio or tascam are good for audio.
View 2 Replies View RelatedI have Dell Inspiron N4050 Laptop with Integrated Webcam and running Windows 7 Ultimate edition - 64 bit.I normally call using Gmail's Call phone service. I want to setup so that I can use Internal microphone in laptop to transmit my voice and hear the incoming call voice using external speakers.I normally keep external speakers connected to laptop for listening to music, but whenever I have to make a call, I have to remove the speaker cables and connect headphone cables in audio jack. So, I am looking up for solution to do make audio/video calls using external speakers and without needing to connect headphones to transmit my voice to caller.
View 2 Replies View Relatedi have a very strange problem: when i play sound files that reside on my laptop, they play through the external speakers that are connected to my docking station. but when i play a Internet video or there is a web page that plays sound, it will only come through the tiny onboard speakers on the laptop. i've gone through every setting i can find on the computer, without finding anything amiss.
View 1 Replies View RelatedI bought this speakers a while ago for my older computer and recently i bought this new hp so im using them on my new hp desktop and ever since i bought the speakers they have allways made this high pitched noise .Now my HDD makes the same high pitched noise but not as loud as my speakers make it i feel like the speakers are just transmitting the sound tha the HDD is making but just alot louder?
View 4 Replies View RelatedI've just installed Win 7 on my Toshiba M100. After installation, the sound driver (Realtek HD Audio) is automatically detected and it works in a very riddiculous way:- In the Sound Setting --> Playback tab --> There're TWO speakers, both are High definition audio device and look exactly the same. If I set the first speaker as default, then I can hear sound from the laptop's speakers but when I plugin my headphone, I can not hear anything !!! If I set the second speaker as default, then the laptop's speakers doesn't work, but when I plugin my headphone, I can hear sound from my headphoneThis is very riddiculous and annoying, having to switch default sound device everytime I plugin or take out the headphone is almost absurd
View 1 Replies View RelatedI always choose the "No Sound" option in windows control / sounds panel.
But when I unplugg some USB devices (like a bluetooth controller card which I use to communicate to my cellphone) I get a system sound which is incredibly large, makes me jump every time .. hehehe .. I cannot find any sound settings in the PC suite program (sony-ericsson) program .. and like I said above . I have made sure the NO SOUND option is chosen.
Anybody know how to stop that unmounting sound ?
It's probably right there before my eyes somewhere but cannot find it .... and since I have my computer connected to a external sound system with large speakers (use it for writing music and recording) .. that sound scares the .... out of me each time..
I have a gateway netbook. Normally when it is plugged in and I unplug it the screen dims. Yesterday it stopped doing that. Now when I unplug it stays at the same brightness. Just to clarify, it seems as though whether it is plugged in or not, the brightness is like it used to be when I unplugged it (it is dimmed either way). It's not that important because the thing stays plugged in most of the time, but I am curious as to how this could happen. I just reinstalled Windows on it a few days ago. It is 32-bit ultimate, if that matters.
View 1 Replies View RelatedI'm using Windows 7 Ultimate 64 Everytime when I unplug a device connected to my computer through USB port (such as FlashDrive, Zune, PSP, my phone...), if I shut down or restart my computer immediately, I will get a BSOD. If I wait for a while after unplug my device, then BSOD won't occur.
View 6 Replies View RelatedI have Apacer 32GB SSD and I have 64 bit version of Windows 7 installed on it. Peformence is nice and fast but for some reason Windows just freezes (1-2 times a day or so) because no SSD is present. I am able to open my computer before total freeze and no SSD is present! Then I just unplug the SSD SATA cable and plug it back in a voila! PC unfrozes and SSD is present. What seems to be the problem? I have motherboard about 1 year old and I did download/install all latest drivers. SSD has about 7GB of free space and gets pleny of cooling
View 3 Replies View RelatedI recently built a new computer. The only issue I have right now is that I constantly get a pop-up from Realtek HDAM saying "You just unplugged a device" then immediately "You just plugged in a device".I disabled the popups but they still show up. That's not really the problem, I can live with that. It's the annoying cut out of audio every 20 seconds followed by the audio being a lot quieter. Originally I installed the drivers from the motherboard CD (Asus P8Z68-V Pro/Gen3). Frankly those worked better but I still had the issue, I updated the drivers to a newer version, but now I keep getting this problem more often.
View 7 Replies View Relatedwhy one of my laptop suddenly has no internet access.no matter what I tried its still does not connet.It is show that its connecting to my main network but it said no internet access.
View 7 Replies View Relatedits constantly stops charging must unplug and replug to charge the device
View 1 Replies View RelatedI have a Creative SB X-Fi Xtreme PCI-Ex, and Logitech Z-5500 5.1 THX speakers. All speakers work; all software, drivers and codecs are up-to-date. Recently I noticed that in the Speaker Setup screen, the test button only results in sound from the left and right front speakers.
I checked because after a VLC update, mkv files no longer played correctly in the 5.1 mode. Music played, but the voices were muted (while no speakers are muted, and all are connected). I have to select "2 front, 2 rear" Audio Device in order to hear the speech as well.
I have the same problem when playing movies in PowerDVD, where I have to select the 2-speakers setting in order to hear all the sound.
Note:
- Previously the test button did sound all 5 speakers
- The test button on the Logitech remote still sounds all 5 speakers
I have Windows 7 Professional, 32 bit.
only my front left and sub and main speaker work and if i put the cords in a different hole then only one will work and i got all of the in the right colour coded hole i have tride everything WHAT DO I DO!
View 2 Replies View Relatedmy computer doesn't recognize logitech speakers, it does show realtech are they the same?
View 3 Replies View Related