HomeGroup Only Shows LaCie2big NAS And WDTVLive As Media Devices

Apr 9, 2012

I am having difficulties with my networkshare on Homegroup. With cable connected to my router/modem I have a LaCie2Big NAS and a WDTVLive mediaplayer. Since a few days I no longer see the two devices other than as mediaplayer devices. They are no longer displayed as other devices or computers which I can browse using explorer. Probably an easy fix, but I can't figure out what happened. I have tried several reboots, no change. I am using the ethernet cable on my desktop and wifi on my laptop. Both display the devices the same (useless) way.

Windows 7 home premium 64 bits
ICIDU 707533 N300 Router

View 4 Replies


ADVERTISEMENT

Computer Shows In Homegroup, But Not In Windows Media Player

Oct 15, 2012

I have two Dell laptops, both running Windows 7. I have both set up on a HomeGroup and have enabled media sharing on both as well. Network discovery is turned on for both, file and printer sharing is on, password protected sharing is off. Under WMP, I have Media Streaming on. None of my folders are hidden.

For this discussion, things with Laptop A are fine, but Laptop B is causing me some problems. I have two main issues and fear they may be related: 1. From Laptop B, I can see Laptop A in the homegroup and I can see it in WMP. I can access all of Laptop A's files and play them back with no problem. However, from Laptop A, I can see Laptop B in the Homegroup, but I can not see it in WMP. I can navigate to certain folders in explorer and see the files, but I can not play them, even though I have all sharing functions that I can think of turned on. (I do have McAfee running, but disabled the firewall in case that was the problem. It didn't help)

Also, I have a DLNA compliant device on the network that I can stream music to using the "play to" feature in WMP. From Laptop A I can play to the network speaker just fine. I can not from Laptop B. I should add that I can "see" the device in WMP from Laptop B, but when I queue a track to play, it just hangs up as if it can't communicate any further with the networked speaker.

View 1 Replies View Related

When Go To Print Something Through The Homegroup From The Laptop Only 1 Printer Shows Up?

Jun 25, 2012

I have a homegroup set up with a desktop and a latop, 2 printers which are physically connected to the desktop.When i open homegroup to see what devices are connected the 2 pc`s and the 2 printers show up but when i go to print something through the homegroup from the laptop only 1 printer shows up to print from even though both printers show up in the homegroup?

View 10 Replies View Related

External Hard Drive Shows Up In Devices But Not In Computer?

Jan 26, 2012

I got a problem, my external hard drive (westen digital 1.0TB) isn't popping up my computer. I can see it in devices (USB to ATA/ATAPI bridge) but i can't acces it.What i've done already:Computer Management-> Disk Management. Than ive to initialize the disk, i can choose between MBR and GPT. In both cases i got the error: Data error (cyclic redundancy check). I can't chance any letter Downloaded different programs but non of them worked

View 2 Replies View Related

Connect Media Player On PC Homegroup

Mar 19, 2011

I'm new to windows 7 and i want some help. I have one apacher 460 media player which i would like to connect on my homegroup so that i can stream movies from my pc.

View 1 Replies View Related

Media Player 12 Not Sharing Stream / Homegroup Will Not Die?

Jan 13, 2012

Long story short I just want to connect my Windows Media Player/Center to my Xbox 360.I can't enable streaming from the Media Player. It wont show the button or option at all.I have also tried to open homegroup and turning on media sharing and it wont turn on. The button turns grey for a moment then it goes back to saying "Turn on media streaming".From the Windows Media Center I can get some kind of connectivity to the Xbox, but its very brief. Usually when I go to set up the extender it gets to building media library on the "Windows Media Center" then the "Xbox Windows Media Center" gives a failed to connect, retry or cancel.If I take a peek into the network from the explorer the media devices shows Xbox 360 Media Extender and it disappears within 3 seconds also another that says Xbox 360 which stays.I have tried going into services.msc and making sure UPnP, SSDP, Windows Media Player Network Sharing Service are enabled. I also disabled Windows Media Player/Center from the windows defaults to try and reinstall it.

View 1 Replies View Related

Media Center Shows No Signal

Sep 10, 2011

Using a Sagent SBT TVFM card connected to a Dish Network Dual Receiver as a 2nd TV connection of Antenna, channel 21. Receiver is an HDTV for 1st TV only, so taken from 2nd TV connection, not HDTV. Under XP, using Sagent's software, set to Antenna, channel 21, receive TV fine. However, under Windows 7 Media Center, set to same, receive a "No Signal" Error.However, if changing channel either one up or one down and back to 21, TV display comes on for about 10 seconds after which it goes back to no signal.Have updated the driver for this card to the latest Windows 7 driver, using Driver Agent.

View 1 Replies View Related

Media Player Shows On Network

Nov 2, 2009

I am wondering if I am missing something here, I have to my knowledge turned off all media streaming capability but yet when I am listening to tunes in the office I have noticed that there is an icon for my office pc's media player on the network. I have turned off the functionality in advanced sharing and it is not turned on in wmp. Is this just the way it is now? Seems like this should be able to be overridden, virtually every guest in my house has access to my htpc and I don't necessarily want them to have access to my office pc's media.

View 1 Replies View Related

Media Devices As Shown On Network

May 6, 2009

In the right pane for Network on Windows Explorer there shows Media Devices. How can I get rid of these icons?

View 2 Replies View Related

Computer And Media Devices - Network Categories

Oct 21, 2009

Does anyone know why in my Network screen, my actual machine is noted as a Media Device, whereas the other machines on my network comes under Computer?

The other machines's Workgroup is WORKGROUP, amd the actual machine's workgroup is Unidentified Network.

View 9 Replies View Related

USB 2.0 Media Center Devices Not Working In USB 3.0 Slots

Feb 7, 2012

I have USB 3.0 slots in my Dell Laptop. My desktop has a couple of these, too, but also a number that are USB 2.0. The Hauppauge HD-DVR and Media Center remote which work fine when used with USB 2.0 slots don't work in USB 3.0 slots.

View 1 Replies View Related

Share Shows On 2 Windows Media Center Computers?

Dec 10, 2011

I would like to watch shows recorded on the other wmc7 computer on my computer. how can i do this?

View 4 Replies View Related

FLAC Tags Shows In Media Player, But Not In Explorer?

May 3, 2011

I have this problem with most of my FLAC albums where the tags will show just fine in my media player (foobar2000), but they won't show up in Windows Explorer.

how to make them show in Windows Explorer too?

View 6 Replies View Related

Streaming Music To Other Computers And Media Devices On Network

Oct 29, 2011

I'm trying to stream music to other computers and media devices on the network. I have 2 x W7 PC and 2 x W7 laptop. Laptops can push music to other PCs and to media player, but PC's won't, although they can receive from laptop. When I select 'Play To' in Media Player, the dialog box does not appear - well is does for a split second then disappears. PCs are 64bit with IE9, laptops 32bit with IE9. All settings checked and the same. Laptops are wireless, PCs on ethernet.

View 4 Replies View Related

Streaming Media Options - Removed Devices Showing From All Networks

Mar 14, 2011

(Win 7 Pro 64-bit). On the "Choose Media Streaming Options for Computers and Devices" screen in the Network and Sharing center, where it shows devices on all networks, how do I get back devices that I remove from that list? I accidentally removed them and want to get them back.

View 1 Replies View Related

Windows 7 Control Panel Homegroup Not Revealing Homegroup Password?

Aug 3, 2012

I installed Windows 7 on my laptop, and I also have a desktop running Windows 7. I am trying to connect my laptop to my homegroup with the password for my homegroup, but my desktop will not reveal it. Is there any other place that I can find it?

View 1 Replies View Related

[HomeGroup] 1 Pc Not Listed / Identified In Homegroup?

Aug 28, 2011

I have an issue which I can't find anything obvious on.I have 4 Windows 7 machines, 1 x W7 Pro, 2 x W7 Home Premium & 1 x W7 Starter all in the same Homegroup.The W7 Pro machine can see all the others under Homegroup in Windows ExplorerAll 3 of the others can see each other in the same way but the W7 Pro machine isn't listedThe 3 others can access the Shares on the W7 Pro Machine by going to Network rather than Homegroup in Windows Explorer.

View 1 Replies View Related

Can't Connect Wifi Devices To Wired Devices?

Jun 25, 2011

I have been unable to connect to anything on my wired network, for about the last week. I don't remember making any changes however, I just became unable to connect.I having done a little troubleshooting.1. I can connect to the shares of my Windows Home Server if I use the IP address. The name does not resolve.2. Flushed DNS and restarting DNS server. Flushing DNS works on one client, to allow browsing by the name & restarting DNS works on the other. However neither works after a restart.3. Only my Wifi clients are experiencing this issue. My wired clients, desktops, PS3, Xbox 360, and Boxee can connect perfectly.This issue is not limited to my server. I can't connect to shares on my desktop, nor print to my wired printer.Some network background:I have DSL through CenturyLink and have a Linksys E2000 router.

View 2 Replies View Related

When Boot From Windows 7 It Shows 64 Bit , Otherwise It Shows 32 Bit

Jan 22, 2012

I had windows vista 32 bit earlier. Then I got windows 7 professional upgrade in trial period. I didn't notice how it happened. Of course it must be my mistake. Now when i boot from windows 7 it shows 64 bit and in vista it shows 32 bit. The system asks before booting which one to choose. It's today only that I have installed but I am not facing any problem as such except that i need a product key within 30 days. Should i leave as it is or uninstall vista somehow. Would i be able to reboot my system using the 32 bit vista CD?

View 5 Replies View Related

Change Default Media Player / Icons On Media Files Not Changed

Nov 28, 2012

I have VLC Portable as the default program for opening some video files, like .mp4 and .avi. And I have Foobar (portable) as the default program for .mp3.Usually the icons on .mp4, .avi, .mp3 files get updated with the icons of the assigned media players.But on this PC it's not working. They're still the same icons as if WMP was the default player.Does it have to do with the Standard user account? (Because on other PCs I run from an Admin account and I don't have such problems.)

View 5 Replies View Related

How To Make Windows Media Player Stop Updating Media Every Freaking Time Start It Up

Dec 22, 2010

How can I make Windows Media Player stop updating media every freaking time I start it up? It always hogs up massive amount of CPU power and goes into (Not Responding) for a min while updating.I only add media files to the Windows Explorer Library so I can get indexed searches. I don't even use WMP to view files or anything. Just to burn some music CDs sometimes.I've tried deleting the files from the WMP library but the next time I open it up, it scans and updates all my files again! Is there a way to completely purge the WMP library and make it not update ever? I've unchecked every option that seems to make it scan and update but it still does it.Basically I want to UNLINK the Windows Explorer Library from the WMP Library.

View 9 Replies View Related

Windows Media Center - Change Media Browser Icon

Jan 18, 2011

How to Change the Default Windows 7 Media Center Media Browser Icon ?

View 0 Replies View Related

Use 64bit Media Center With 32bit Media Player?

Jul 25, 2011

I'm in grave problem here. I just installed windows 7 x64 a few days back. And initially I installed the 32bit version of k-lite codec pack for my windows media player. The media center worked fine then. It was loading my ffdshow and ac3filter along as I checked it.But then yesterday I noticed that the same pop-up od recommended/express install of WMP came again. Initially I thought that it must be some bug or something, but then when my MKV and AVI files didn't work in WMC, I realized that somehow WMP x64 got triggered, and now it is using the x64 bit of WMP in WMC. And I just wanna revert back to 32-bit WMP in WMC.

View 9 Replies View Related

DVD Playback Stops In Media Center And Media Player

Jan 15, 2009

I have checked two seperate DVD movies and they stop after the splash screens, FBI warning and Corporate logos, and never make it to the DVD menu.

This DVD player is an external player and I have no problem with playback on my Dual boot with Vista Home Premium.

Any suggestions?

View 5 Replies View Related

Windows Media Player Stuck On Opening Media?

May 26, 2012

Windows media player stuck on opening media

View 1 Replies View Related

Media Player And Media Center Cannot Play DVD

Dec 20, 2009

I can't get eithe WMP or MC to play a DVD. I've set the region code. WMP acts like it will play, but then just goes blank, and MC says it cannot play the DVD. These are original discs, not burned copies. I have a custom built system, with 2 graphics cards (GTX 260 and a GT 220) 6 GB of RAM, and an i7 processor. Any help would be greatly appreciated.

View 7 Replies View Related

The Media In The Drive Is Not The Requested Media?

Nov 22, 2011

I'm trying to get some videos and pictures off my backup DVDR disk, but for some reason when I tried to restore them on my computer I always get this message:The media in the drive is not the requested media.Please insert the media with the following label into F:Name-PC 1/5/2011 10:49 AM Drive 1

View 2 Replies View Related

Way To Set Up A Homegroup

Jan 5, 2012

i thought it was pretty straight forward. guess its not.i've got the password and whatnot ready from my computer so i want my laptop to connect to it. however it only says 'create a homegroup' rather then 'join homegroup.' i tried troubleshooting but that crap never really does anything. i really don't have a clue how to set this thing up. i tried to follow a Internet video however i just can't see 'join homegroup'. my laptop is on windows 7 home premium and my computer is on windows 7 ultimate. both on service pack 1 and 64bit.

View 1 Replies View Related

Unable To Set Up Homegroup?

May 1, 2012

I have a PC running Windows7 on which I have set up Homegroup, complete with password. I also have a laptop running Windows7 on which I tried to run Join Homegroup. I was told in the instructions to go to Start/Computer/ and click on Homegroup in the left hand column the choose Join Now in the window that comes up. There is no "Join Now" box in the window that comes up and I therefore cannot start a Homegroup. I have a Wi-Fi modem which connects me to the net wirelessly and My PC has a wireless card which works fine as far as I can tel

View 5 Replies View Related

HomeGroup Printers

Jul 15, 2009

i have a pc (Windows 7 build 7100) that is connected to two printers (of which one prints (HP laserjet CP1215) and one only scans (no ink)) and it shares those printer.

My Windows 7 build 7600 (on my main pc) added the scan-printer without asking me and didn't add the other one (the only one I can print). I then disconnected this one from the other pc and looked again, no install here.

While I used build 7100 with my main pc too, it asked me: "Do you want to install HomeGroup printer?" and it worked like a charm.

Now I tried to manually add this printer and it asked me for a driver.

I installed the HP drivers but still, not working. Then, when it asked me again to point to the .inf file, i selected the one HP-driver-installation installed (to my C:Program files folder) but it said this driver is from a "non-certified" publisher (or something like this, sadly I can't reproduce this so I don't remember the exact words).

I clicked "install nonetheless" because I knew it was the right driver (printer prints perfectly from all other Windows 7 workstations).

Now when I try to connect to the printer (still not showing up in "Devices and printers" it tries to connect, looks for a driver, kinda finds one and then tells me, it can't connect.

I cannot even select a new driver or anything, I can only close the window.

On all my other pcs (I only use Windows 7 since the RC) it works and worked without problems. I miss the "Install Homegroup printer" prompt and well ...

any ideas?

ah well i installed 32bit versions of the driver and now i downloaded 64bit versions, but even after installing it doesn't work and as I've said before, I cannot manually select a driver inf file anymore, so ... I can't install the printer.

View 2 Replies View Related

HomeGroup Networking

Oct 18, 2008

Microsoft had tried to get its "Castle" networking scheme into Windows Vista, but the feature will finally appear in Windows 7 as HomeGroup. Essentially a combination of workgroup networking with file and media sharing, HomeGroup makes it easier to create a home network where PCs share pictures, music, videos, documents, printers, and other resources with each other.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved