HP Recovery Manager Doesn`t Installed?
Feb 1, 2012HP Recovery Manager don`t installed
View 1 Replies
ADVERTISEMENT
HP Recovery Manager Says That Recovery Partition Has Been Removed?
Jun 26, 2012is not empty - it is almost 80% full but when i click on it there are no files. Tried - to the extent of my knowledge - to see if the files are hidden but didn't reach anywhere. Tried a restore point but that didnt work either.
View 4 Replies View RelatedConfiguring Windows 7 Using HP Recovery Manager?
Dec 28, 2011Due to some problems I was having with updating windows, I decided to recover my HP computer to its factory condition using HP's Recovery Manager.I don't have a recovery disk, so I chose to recover from the recovery partition on the hard drive. I chose to not do a backup and the recovering process went fine. After it was done, I was asked to restart my pc and once it restarted, I was at a black screen which said something along the lines of "setting up devices". After a couple of minutes, a small window showed up with the fallowing message:"Windows setup could not configure windows to run on this computer's hardware." This window shows up when the black screen says "Setting up devices". I press ok, then the black screen says "setup will continue once your computer is restarted". The pc is restarted automatically and this window shows up again.At first, I had unplugged an external USB hard drive and an external wifi antenna, leaving my monitor, mouse, and keyboard plugged. But, after doing some research, I found that some hardware installed inside the pc might also be causing the problem. So, I removed the wireless card, disconnected the DVD drive, and disconnected the cable from the USB and analog ports of the front panel. The only things that were connected (as far as I saw), were the fans, motherboard, power button, and the only hard drive. I went back into the recovery manager and did the recovery again, once it was done and the pc restarted, I was brought back to the same message.
View 2 Replies View RelatedHP Factory Restore - F11 Recovery Manager Not Working
Jan 17, 20121. I have no OS installed, but BIOS shows that there is a WIN 7 OS, which I know isn't there.
2. I have four partitions; C,D,E,F.
3. The C: is the HP_RECOVERY partition.
4. The C:HP_RECOVERY partition is set to ACTIVE.
5. I have rebuilt the BCD from scratch.
6. There is a BOOT (X partition which shows on the CMD. Someone said its the RAM virtual partition.
7. Upon booting the system gives WINDOWSsystem32winload.exe error.
8. The f11 or recovery manager ain't working.
What I Want
1. I want to do a factory restore.
Windows 7 Home Premium 64bit No Recovery Manager?
Aug 14, 2011My new laptop with Windows 7 pre-installed Home Premium 64bit, and what I know to Recovery (system image with installed drivers),which is placed in a hidden hard drive partition, you fail to restore the system with the drivers (to factory) .
View 9 Replies View RelatedWindows 7 Task Manager Doesn't Show Up?
Jul 12, 2012I have a small problem with my Windows 7. Here's what happened:Yesterday, my pc was running fine. I turned it on at 10am and it was running well. My sister ordered a new router so I set it up for her (AirPort Extreme). I installed the utility for it, was a simple setup for me. After that, I connect to it wirelessly and I see that windows update has a few security updates. They install as I turn off the pc. I then turn it back on a few hrs later and notice that when it reaches the login screen, it takes a few secs for it to load. This is unusual being that the days before it was always ready to receive input. So I login, get the welcome screen, and my desktop screen. Taskbar loads as usual, however I can't get anything to show up when I click on it. I think at first that its Comodo (is in training mode) so I close it out. Still nothing. I then press ctrl+alt+delete. Nothing. I then press it rapidly to see what happens. After a few mins, my screen turns black. A message then shows up that ctrl+alt+delete has been pressed but due to something that it won't show up. Had to press either the power button or esc to leave the screen. Safe mode works. I do a system restore back to when the windows update and to the installation of the router. I scanned and haven't found anything yet. Today, my pc looks like its running fine but its still taking a few secs on the login screen and the desktop still idles. I'm going to contact HP to see what they can do but I wanted a second opinion.
Here's my specs (looks like this):
HP Pavilion dv7t-7000 Quad Edition
Windows 7 Home Premuim 64-bit
Intel core i7-3820QM CPU @ 2.70GHz
8GB RAM
1TB hard drive
NVIDIA GeForce GT 650M
Using Recovery Manager To Reset Laptop - Image Failed To Copy Across
Nov 3, 2012I was using recovery manager to reset my laptop (ACER 5470G) back to factory settings. The image failed to copy across. I then got Boot Mgr is Missing - I have tried, everything it states on the internet and even bought some software WIN RE to carry out the recovery but nothing works. I have tried to reinstall W7 ISO and W7 full installation software but it all has failed. The message i get with the full install disc and iso is that the system i have to select a drive PQ, F and C, the only option I have is C, but when I try it states it can't do it. I tried Ubuntu and it did work, so I presume the HDD is ok. I did have Zone Alarm Data-lock installed on it and I don't know if that is preventing the re-install. I tried to install XP, but that just dies out.
View 1 Replies View RelatedNetwork Adapter Doesn't Show In Device Manager
Jan 4, 2012Just reformatted my alienware laptop because I haven't used it in months. Now I don't even see "Network Adapter" listed under device manager so when trying to install the driver i don't think it had any effect. Running m15x windows 7 home premium 64 bit.
View 12 Replies View RelatedWindows 7 Boot Manager Default Entry Doesn't Work
May 30, 2012When I start up Windows, I have two options, "Windows 7" and "Windows 7 Home Premium (Recovered)", and only the second one works. This is annoying because it defaults to the first entry.Some background info: I added a second hard drive to my laptop, and I used an Ubuntu install disc to move Windows 7 to the second hard drive and install Ubuntu to the first (larger) hard drive. When I start up my computer, the Grub boot loader gives me an option between Ubuntu Linux and Windows 7.When I first tried to boot into Windows, it had problems (caused by finding itself on a new drive I assume) and attempted to do startup repair which didn't change anything. It had detected a Windows 7 installed on drive "E", attempted repair, but on reboot I got to the same place. Next I used the Windows 7 Repair disc that I had burned earlier, which appeared to do the exact same process of attempting startup repair, however this time when I rebooted I got the option between "Windows 7" and "Windows 7 Home Premium (Recovered)". The first option causes it to do what it did before, and the second option gets me into Windows 7 fine. Windows still sees its hard drive as "C" which is good.While looking for solutions to this, I found the bcdedit utility. I attempted to rename "Windows 7 Home Premium (Recovered)" to just "Windows 7 Home Premium" to test whether it changed anything, but when I boot up I still get "Windows 7" and "Windows 7 Home Premium (Recovered)". I don't even know where the "Windows 7" entry comes from.
Here's the output of `bcdedit /v`:
Code: Windows Boot Manager
--------------------
identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795}
device partition=C:
path ootmgr
description Windows Boot Manager
locale en-US
default {74e62c05-aa3f-11e1-90f0-e412b6135969}
[code]....
Catalyst Control Center Doesn't Appear On List In Install Manager
Oct 9, 2012[I reinstalled Windows 7 using the Upgrade option (not clean install) but before I could do the reinstall it said I had to uninstall Ati Technologies which I could then reinstall after the upgraded Windows]I ran install for the Catalyst Softward Suite for drivers which had the CCC listed, but there is no CCC option in the install list when I run to install. It just doesn't appear! I've uninstalled ATI Catalyst Install Manager, ran Driver Sweeper in safe mode and then reinstalled but still the CCC does not appear in the list. I've also checked the Windows/Assesmbly key problem too. It's the same problem as this post: Catalyst Control Center missing/Wont install?I have a Radeon 4000 series card.
View 4 Replies View RelatedSystem Recovery Options Window Doesn't Appear
Sep 1, 2012Problem 1: Computer wont boot past logo screen
Problem 2:System Recovery Options window doesn't appear. The little box with command prompt, startup repair, etc doesn't come up at all. Tried 2 separate repair disk and repair your computer in the advance boot options list, still no luck, pc still wont boot and recovery options are still not appearing on screen. Also I have waited over an hour for it to show.
Format Harddrive With Pre-installed O/S And No Recovery Disc
Apr 12, 2012I bought a HP Laptop with Windows 7 Home Premium pre-installed. I got rid of any bloatware and as I'm typing this, Macrium is imaging my C drive to a network drive. Now my question is, would I be able to completely format the computer, set up my own partitions and install Windows on one of them? Preferably a fresh and clean version but I wouldn't mind the bloatware one either. Things to consider, I don't have a disk-drive so it'd have to be done with a thumbdrive; I have not been able to find the actual O/S product key, if someone could tell me where to locate it.
View 4 Replies View RelatedGpu Doesn't Show In Device Manager; Network Card Driver Install Fail
Aug 7, 2012my brother's hdd in his laptop was going bad, it kept failing to boot. so i replaced it with another one. when i turned the laptop back on it started installing all the drivers for his hardware (windows was already installed on the 2nd hdd) and prompted me to reboot. after i did windows failed to start several times. i re-installed windows from scratch, and now his graphics card isn't showing up in device manager and windows cant find a driver for the network or ethernet card.
his specs:
gateway
windows 7 professional x64
ati mobility radeon hd 4250
broadcom bcm943225hm (network card)
amd phenom II x4 n9790
4gb ddr3
Data Recovery From Former BitLocker Drive On Which New Windows 7 Installed
Nov 5, 2012I happen to have reinstalled by mistake a new Windows7 OS on a drive (I had two drives one with an OS and another with a bitlocker drive used for back up, both drives were IDE drives and the bitlocker was under slave mode if that hosted very important data and was encrypted by Bitlocker. How to recover this formerly encrypted data? The drive is now recognized as an active healthy partition with an associated drive letter (different from the original one). I don't have the bitlocker key.
View 4 Replies View RelatedJava Says It's Installed But When Try Reinstall It Says It Doesn't Exist
May 29, 2011When I try to install java because my browser says it's not installed it says it IS installed. So it asks me if I want to reinstall that's fine too. Then it gives me an error message saying that you can only do that if it's already installed.I can't find folders of it it's not in the add/remove programs list either.
View 1 Replies View RelatedSATA III On OLD AMD When It Is Installed The Computer Doesn't Boot?
Jul 8, 2012I have a problem, I need to temporarly get a Sata III installed in a AMD Athlon 64+ 4000+, when it is installed the computer doesn't boot when it's not installed (attached to the motherboard SATA port) the computer boots fine, my guess is that the motherboard can't handle these types of SSD, right or wrong ?
View 3 Replies View RelatedMBR Damaged And Windows 7 System Recovery Menu Doesn't See An Operating Sys?
May 20, 2012What I had initially: Quote: 120 GB hardisk divided into 3 partitions.1st partition (22.2GB) with XP, second partition (30GB) with win 7 and rest (60 GB) as mass memory for storage.What I did: Quote: Installed Ubuntu 12.04 LTS desktop 32 bit with USB on the partition which had XPFor that I had to format it and convert to ext4 and also create a swap memory of ~3GB.Thus I finally have 1 partition with ubuntu another with win 7 and another with mass memory.Now, Problem:MBR got damaged as win XP partition was formatted (which had bootloader) and thus I can't login to win 7 from Ubuntu Grub.To solve this problem I had to create a USB recovery disk for Windows 7. But now the problem is even after using bootrec command which gave sucess result for fixmbr, fixboot, scanos and rebuildbcd i am not able to boot into win 7. The computer just hangs after bootup with a blinking cursor.
View 4 Replies View RelatedWindows 7 Installed Asus Wi-Fi Adapter, However It Doesn't Work
May 19, 2012I've installed ASUS Wi-Fi USB adapter (model USB-N13) for LAN. There is Windows 7 Home Premium x64. Through control panel I see that adapter works normally and the drivers are the latest. However my PC doesn't see the adapter - the ASUS utility notices me "ASUS Wireless LAN card is taken apart from your desktop PC".I have the same Wi-Fi adapter at another my PC with Windows 7 Home Basic, and everything works nice. Of course I changed these adapters between my computers. Conclusion is both adapters are working good. The same models, the same drivers. Actually I don't understand where is the mistake?
View 1 Replies View RelatedWindows 7 Toshiba A505 Windows Boot Manager And Recovery Media Failed
Feb 20, 2012I have a Toshiba Satellite A505-S69803; serial number Y9340538Q, with Windows 7, 500Gb HDD at 5400rpm and 4Gb RAM... I think that's all correct.Anyway, long story short, I got a b!tch of a virus, which apparantly was doing all sorts of nasty things to the explorer.exe file in particular. So I backed up all my important stuff: files, Uni work, writings, music and photos etc onto an external hard-drive and went about restoring the laptop to out-of-box factory settings by making the Windows 7 Recovery Media Discs. But when I try to use the discs I get told after about 30 minutes The Toshiba Recovery Wizard "Can't read from the source file or disk: PREINST5.SW5" with options to: Try Again (The same thing happens), or Skip (Same message again), or Cancel (in which case I'm back where I started).After the Recovery Wizard failed I chose the option to erase the hard-drive; it then appeared that when I turn on the laptop as normal I was told <Error>: F3-F200-0002 and the Recovery Media Disks still refuse to work.Now, if I turn on the laptop as normal a message telling me to insert the installation disc, choose language and click "repair your computer". So I put in the recovery disc and get the same message.
Toshiba can't help as my A505 is an American model in Britain and out of warranty anyway. Europe Toshiba HQ don't supply the recovery media for the A505 and the American based Toshiba aren't allowed to send the Recovery Media to Europe; so apparantly I get no help from them. And Microsoft can't help me because my laptop was purchased with everything pre-installed so the codes associated with my Windows and Office are comletely irrelevent.I have been told that I need to purchase a compeltely new hard-drive and purchase Windows 7 brand new to get my laptop back up and running. Purchasing a new OS isn't too much of an issue because I can just get XP for a tenner, validate it with Microsoft and then get a student upgrade onto W7-Ult for �60. So �70 in total, I'm fine with that. But do I need a new hard-drive too? Or can I rescue everything I already had?
Windows 7 Boot Files Or Boot Manager Installed In Wrong Partition?
Dec 25, 2012this is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]
View 6 Replies View RelatedError "BOOTMGR Is Missing"_It Doesn't Allow To Use Recovery Disk
Sep 15, 2011my sister has Sony Vaio E-Series which runs windows 7 Home edition. She encountered a problem starting up the windows and decided to use Recovery Disk, Recovery Disk stopped working and needs additional source (disk) to run. She weren't successful so decided to stop recovery and run it again. After that the error "BOOTMGR is missing" appeared! When I put the recovery disk inside the machine it doesn't work. F8 and F4 keys also don't work. So I can't use the similar solution mentioned on the internet like running "system restore". She also doesn�t have Windows 7 installation disc to run.
View 2 Replies View RelatedWindows 7 Doesn't Load After 'windows Error Recovery'
May 17, 2011i have a dell inspiron 1545 installed with windows 7. I started it this morning and installed the latest version of free AVAST virus protection which then told me to restart the computer. So after doing this, It didn't load properly after taking my password and came up with a blank screen. So i manually turned my computer off after having waited for it to load (which it never did) now when i turn it on it comes up with the 'windows error recovery' screen. I have tried every alternative way of booting it up including 'safe mode' all which didn't work and the screen ended up blank every time. I must have tried it at least 15 times but still had no joy.is there anything i can do without taking the computer to pieces?
View 1 Replies View RelatedMonitor Page File In Task Manager / Resource Manager
Dec 7, 2009I am installing more RAM in my system, and want to monitor the page file for improvement/reduction in size and use. Other than performance monitor, can I see the page file in either task manager or resource monitor?
View 1 Replies View RelatedCan See External Hard Drive In Device Manager But Not Disk Manager
Oct 19, 2012I just bought a new ASUS computer with Windows 7. I have a Macbook Pro and would like to transfer my photos and music onto my new computer. I have 2 external hard drives that work perfectly fine on my mac as well as other PCs. When I plug either of my external hard drives in they are recognized in device manager and say they are working properly but are not recognized in disk manager or under my computer...
View 1 Replies View RelatedMoving Unallocated Space PAST Recovery Partition, OR Destroying Recovery All Together?
Dec 25, 2012I have Unallocated space at the very end of my hard drive, even after the 25gb Recovery Partition, this is due to copying my old hard drive onto this new one via Clonezilla, and it automatically keeping the unallocated space at the end. Can I either move the unallocated space around the Recovery Partition, or delete the Recovery Partition altogether? Sorry if I am being a little unclear.
View 4 Replies View RelatedDisc ASUS Recovery Error 1029, Cannot Boot Into That Recovery Partition
Jun 23, 2012I've gotten to the point where I need to just reinstall windows completely on my Asus G74SX (too many problems, I want to start fresh.). I encounter an error 1029 with Asus's recovery disks that I made when I had windows working: it says it is recovering all the way to 100% then doesnt work. I am in the process of trying it again so I'll see if it actually managed to wipe my hard drive like it said it was doing, and maybe if it did actually work and reinstall windows.However, I'd like to be able to get into the recovery partition because I would prefer restoring it with Asus as they recommend me to. However, when I hit F9, their target to get there, it doesn't do anything and just reloads the boot screen, with the Asus logo on it. I don't have an actual Wndows recovery CD so that's not an option, and at this point since my hard drive has likely been wiped by these recovery DVDs, I don't think going into Ubuntu and fixing the MBR will do me much good anymore.It may be worth noting that before I last restarted, I marked the Windows partition as active because of a tutorial here, making it so that recovery partition isn't active anymore.
View 4 Replies View RelatedInstalled Windows 7 In Laptop,but Accidentally Installed It In D-driv?
Nov 19, 2011i had installed windows 7 in my laptop,but accidentally i installed it in D-drive,now both C & D drives are showing program files,program files x86,windows folders,my D drive is full
View 1 Replies View RelatedXP Recovery Console Versus Vista/7's Recovery Console?
Nov 19, 2011It seems to me that XP's recovery console is somewhat better than the one that comes with Vista or 7, unless someone can point me in the right direction for finding further documentation on this topic.
The main difference is the lack of ability to tinker with services (LISTSVC / ENABLE / DISABLE commands). A missed opportunity is the lack of registry tweaking, considering that REGEDIT can be run, but I think it only allows you to look at the registry for the recovery console rather than the main Windows installation, which doesn't help much (though I haven't tried to import/mount the registry file from the main Windows installation).
Delete The Recovery Drive And Use All The C And Recovery Drive With Windows 7?
Mar 4, 2011I am trying to delete the recovery drive and use all the c and recovery drive with windows 7. I do however want the Toshiba extras that come with it, well some of them. I also would like to use the windows experiance ratings.
View 9 Replies View RelatedDevice Status - No Driver Installed But Driver IS Installed
Sep 19, 2012Every now and then my WiFi stops working, and if I go to dev mgr, the General tab tells me that "No drivers are installed for this device" for device status. On the other tabs, however, I have all the details on the installed driver, and if I ask Windows to update the driver, it tells me that the best driver is already installed. The problem is solved by rebooting, but I find that annoying. I'd like to figure out WHY it does that. I've saved earlier versions of that particular driver from over the last three years, and the problem occurs with all of the drivers. This is a Windows 7 Ultimate 64-bit system. The driver is an Intel driver; the one installed at this moment (it just happened again, and I have not rebooted, since I had a powerline enet outlet handy), and the version of the Intel(R) WiFi Link 5100 AGN is 14.3.1. I have other versions of that driver saved, from 13.2.1.5 to 15.1.1_Ds64. I had reverted to the 14.3.1 because the more recent versions seemed to be worse about the driver disabling itself or whatever it is doing.Coincidentally with this, the event viewer shows that mmc.exe was terminated because it was hanging. I had just run sfc yesterday, and there are no corrupt files that Windows cannot fix, and there weren't even any corrupt files that it DID fix.
View 5 Replies View RelatedTask Manager Will Not Run?
Jun 2, 2012My task manager will not run. I have a large job running and I don't want to restart. Is there anything I can do to get it to run?
View 6 Replies View Related
