HP Pavilion Dv9500 Will Only Boot Up If Dvd Is In Drive?
Feb 9, 2013HP Pavilion dv9500
View 14 Replies
ADVERTISEMENT
HP Pavilion Dv9500 Will Only Boot Up If Dvd Is In Drive
Feb 11, 2013when i turn on the laptop i get no operating system found.but if i put the windows 7 dvd in it will boot up, if there,s no dvd in it will just say no operating systen found,
once the pc boots up to windows i can take the windows 7 dvd out of the drive and surf the web ect... is there a way to get this to boot up with out the dvd in the drive.. i ran a disk check in commond promp and got failed to transfer logged messages to the event log status 50
X:Sources>
i also ran
bootrec.exe /RebuildBcd
The above command will scan all your disks for other operating systems compatible with Windows 7 and allow you to add them to your system's boot list. and i got total identified windows installations 0 i was told to run this [URL] im not sure what to do here. At DOS prompt type dlgdiag5.exe to run the program???
and at start up it,s not giving me the option to boot from the dvd, i CReated a bootable iso with magic iso.
Installing Windows 7 On HP Pavilion G6 - Won't Boot Up From DVD Drive
Jan 8, 2013I recently purchase an HP Pavilion G6 which comes with windows 8 so i have decided to reformat the hard drive and install windows 7. My problem now it won't boot up from the DVD drive even an USB DVD drive still won't boot up.
View 1 Replies View RelatedHp Pavilion Go Wont Do First To Boot Up?
Sep 6, 2011just got a hp pavilion go but it will not load windos or the set up
View 1 Replies View RelatedHP Pavilion DV6 - Blank Screen, No Boot, LED's On?
Feb 16, 2011I installed some drivers for my iphone, install with no props, when asked to restart, I do.(This have nothing to do with the iPhone)When computer automatic power on, no screen is shown, no boot, and all LED's is on.1st try:I let i stay that way for 20 mins, when i look to it, the fan is running like hell, and ite hot! - FAILEDnd:I let it cool off, and try to power it on with alt key pressed - FAILED3rd:I take out AC, then battery and hold down power button for one minute, plug in AC and try again - FAILED4th:I take out HD, RAM, RTC battery, let it stand empty for and hour, put it all back - FAILED5th:I try to take out only RAM's and plugged them back in every diffrent way i could - FAILED6th and last:Plugged out HD, turned on the computer, and it acted like it never had been removed
View 2 Replies View RelatedHow To Change Boot Sequence Hp Pavilion 750
Sep 22, 2011I have two internals my primary C: uses Win 7 O.S i would like to put Linux fedora on the second drive . i have a disk but it does not pick program automatically the documentation say to change boot sequence i thuoght it was F2 but pressing that right at the beggining does not stop windows from booting.
View 2 Replies View RelatedDual Boot HP Pavilion P6310f With Windows 7 And XP Pro?
Nov 19, 2012Dual boot HP Pavilion P6310f with windows 7 and XP Pro?
View 7 Replies View RelatedCannot Access CD ROM Drive On HP Pavilion Notebook
Sep 9, 2012I cannot access my cd rom drive. I look in the drive section under computers and I see the C drive and the D recovery drive but no cd rom drive. I go to device manager and don't see anything relating to a cd rom drive. I have an HP Pavillion Notebook DV 9810 US and the cd rom drive itself is Lightscribe. I have tried to go into the registry through cmd, regedit and control etc but found no upper filter nor lower filter to delete. Instead when I click on the last folder,4d36e965 I see 0000 and properties. In the upper right I see default, class, class desc, enum prop pages, icon path, installer 32, no install class, silent install.
View 6 Replies View RelatedAudio Drive For Hp Pavilion Dv6700?
Dec 17, 2011Conexant develops audio solutions that are used in a wide range of products including personal computers. We provide customized audio drivers to our customers, which include major computer manufacturers globally. At the request of these manufacturers, Conexant does not provide end-user support or drivers for PC audio products. If you have an issue with the audio configuration in Windows 7, please contact the manufacturer of your computer. (this came from computer)[/b] Worked for a bit now no sound at all had to buy an external one want the one included in my computer to stay on not bounce off. this has happend after installing windows 7 home premium onto my windows vista(worked well with this one) now after awhile it works then now sound.
View 1 Replies View RelatedSystem Boot Failure On HP Pavilion P6000 Series
May 2, 2012problem started within the last two weeks. PC just started boosting fan noise and then just blacked out. now each time i turned it on, it will give me 2 options prior loading system: 1) start-up repair - recommended, and 2) start windows normally. i've tried both but it just blacked out every time after a few seconds so i never got to the welcome screen.
i already tried these:1. replacing hard disk with one from broken PC and same problem as above. 2) corrected modem fan because it got fixed the wrong way by someone when they replaced the burned power supply. 3) re-seated the 2 ram sticks. 4) hooking hdd cable onto another slot on the motherboard.
maybe it is also important to note that pressing power button turns on the computer but the power-on light never even blinks or stay on except the hdd light which eventually goes out after a moment.
How To Download The Hp Pavilion G Series Network Drive
Nov 15, 2012how to download the hp pavilion g series network drive
View 1 Replies View RelatedWindows 7 Won't Recognize DVD Drive On HP Pavilion Dv6000 Laptop
Aug 13, 2012Windows 7 won't recognise my DVD Drive on my HP Pavilion dv6000 Laptop. Works ok on start up, but as soon as Windows 7 starts it stops working.
View 2 Replies View RelatedChanged The Letter Of Boot Drive And Wont Boot?
Jul 10, 2012I recently built my computer and installed a ssd and a hdd, the OS is on the ssd which is the c drive but since it is smaller than the hdd I tried to change the letters around and make the hdd the c drive using regedit because the default install location seems to be the c drive and after restarting the computer it boots up and says preparing your desktop then goes to a blue screen with just the cursor. I tried booting in safe mode and all I get there is a black screen also
View 9 Replies View RelatedHave A 60GB SSD Boot Drive. Can Install Games To 1TB Secondary Drive
Jan 25, 2012Check my Hardware specs for full information
Current setup:
C: Boot, Corsair SSD
D: Files, samsung HDD
D:/boot files/user/(all user account directories moved here, when possible) I'm wondering if it's possible to install games such as Assasins' Creed or Skrym, but install all game data to this folder?D:/boot files/programs/* Many installers allow you to define a custom installation path, But I am unsure if these games would ask for one or force me to install to the default directory?
Installed Storage Drive, Now System Drive Will Not Boot
Sep 30, 2012I have a 1T SATA system drive and a 1T SATA working drive. I installed a 3T SATA storage drive, and now my system won't boot from the C:. I have to go into the BIOS and boot from there, or use a boot disk. How do I get the system to boot from C: again?
View 3 Replies View RelatedInstalled New SSD Boot Drive, Want To Repartition Existing Drive
Mar 23, 2012I have a partition question and after scouring the Web, can't find anyone with the exact same situation as mine. Basically what I'm wondering is if I can delete a primary partition and then extend another, non primary into that space.
Here's what I have and why I want to do this: my laptop came from the factory with one 500GB SATA drive, split into two partitions (C, primary, and D, logical, each 250GB). The Win7 install was on the C drive. Recently, I installed a 120GB SSD as a second drive, and using the tools with it, copied the contents of my existing C partition to the new SSD, and then made the SSD the boot drive labeled as the C drive. So far so good, everything works fine.
Now, what I'm left with is this: C: 120GB (SSD, now the boot drive with the Win7 install) D: 250GB (SATA, the original D partition, Disk Management IDs it as a logical drive, extended partition) E: 250GB (SATA, the original C partition, Disk Management IDs it as a primary partition)
So, I have the original "C drive" on E now... it's no longer the system/boot drive. Obviously I don't need the files on it as they are all on the new SSD. What I want to do is to delete all those files and then combine what's on D and E into one 500GB D drive as I have no reason to have the two partitions. Is it possible to just delete the E partition and then extend the D partition into the unallocated space? I'm confused because it seems as though the D partition may rely on the E partition being there since the E drive IDs as primary. Or would the D partition become primary?
I know I could just back up the D partition to an external drive, delete both D and E partitions, and reformat as one new D and restore the files, but I don't want to create more work for myself if I don't have to. Obviously I don't want to mess up the files on the D drive though, which is why I'm asking.
Move Programs From Boot Drive To Data Drive?
Jan 10, 2013How can I move programs and files from my ssd boot drive to my data drive (Windows 7 x64 PC)?
View 3 Replies View RelatedDual Boot Issue With ' Boot Drive '
Apr 26, 2009ok so im having a weird problem thats probably very easy to fix.
background info: before my Windows 7 install i had 3 partitions
vista 64
xp 32
empty (soon to be linux)
when i downloaded the newest win 7 build i deleted my xp 32 partition and installed Windows 7 on that partition. because Windows 7 creates that "reserve partition" or what ever, it extended my EMPTY partition with my vista partion. which cause it to become a "logical drive" rather than a "boot" drive. aka i cannot figure out how to access my vista OS.. rather annoying since im just toying with Windows 7 atm.
Windows 7 Will Not Boot When The Boot Disk Is NOT In The CD Drive
Jul 24, 20102 months ago, I installed windows 7 pro with no problems at all. Fast forward to today, I decided to reformat because the boot would get stuck in the middle of trying to boot into windows, it wouldn't flash the windows logo. I didn't think much of it so I just reformatted. This is where my real troubles began.So I reinstall windows 7 pro with no problems (the boot disk is in there the cd drive the entire time) I install my programs and what not and install my updates. All 100% Fine. Then I take out the boot disk and restart again... and I get this error message saying:
Nvidia Boot Agent 229.0525
Copyright 2001-2005 Nvidia Corp
Copyright 1997-2000 Intel Corp
Client Mac Address: 00 30 1B BC1F59 GUID: 12973077-FFFF-FFFF-FFFF-FFFFFFFFFFFF DCHP....
Then I press escape, then it says this:
PXE-EA0: Network Boot Canceled
PXE-M0F: Exiting Nvidia Boot Agent
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
So the first time I got this error, I just thought, Oh, something must have happened no big deal, so I reformatted again and again. But I kept on getting the same exact error. It'll load into windows just fine when my install disc is in the cd drive, but when I take it out, that error pops up. *My windows is authentic, each time I have been able to validate my copy.* I have tried installing from my hard drive and from the install disc with same error.*
This is my current set up:
Shuttle XPC SN27P2 (Barebone) Comes with motherboard, PSU, and case.
AMD Athlon 64 X2 5200+ @2.6GHz 65W
PNY XLR8 GTS 250
OCZ Reaper Memory 4GB PC-6400 DDR2-800
WD 74GB Raptor
WD 640GB Internal
WD 2.0TB Internal
WD 1.5TB External
WD 400GB External
Cavalry 1.0TB External
Shuttle 450 Watt PSU
Logitech G15 + MX518 + FuncPad 1030 Blk on Blk
Sony Optirac 18x DVD-/+RW drive
Dual Samsung SyncMaster 225BW 22" LCD Wide Screen Monitors
So how can I get windows to boot up with out having the boot disk in the cd drive...It worked the very first time I installed windows 7 on my PC...
Boot Manager Missing / Boot From USB Drive
Nov 26, 2009For some odd reason, after doing some changes to my partitions in Windows 7 and restarting my computer, I got the ol' "BOOTMGR is missing" message. I have the Windows 7 Repair Disc image file and a 4GB USB Flash Drive, but, sadly, no CDs. Is there any way that I can put the image file onto my USB Flash Drive and boot from it with my Acer Aspire X1200 desktop computer?
View 1 Replies View RelatedChange Drive Letter For Boot Drive?
Jul 25, 2009I deleted my existing OS then created two new partitions on the same drive. Then I installed Vista on one partition and that partition was properly named "c" as ususal. Then I started Windows 7 setup.exe from a different hard drive and let Windows 7 install itself into its own partition. When I got to "My Computer" the Windows 7 partition was labelled as "I" instead of the expected "C" which had never happend before when I did the same thing.
Does anyone know a save way to label the Win 7 drive as "C" while in Windows 7?
Windows 7 Recovery Disk In The CD Drive, Attempted To Boot Up, But The CD Drive Just Spins And Spins But Never Boots?
May 29, 2012My HP laptop HD crashed, am trying to replace it with a Kingston HyperX 120GB SSD. I do not have Windows installation disks, only have Windows Recovery Disks. All installation instructions I have found for SSD's is for cloning, which I cannot do since the HD is deadI have installed the SSD, booted into BIOS, this simple BIOS version doesn't allow me to change anything on the HD, but it does recognize it and let me do a HD test, so it does recognize the SSD. I then put the Windows Recovery disk in the CD drive, attempted to boot up, but the CD drive just spins and spins but never boots up. I thought the CD drive might be bad, so I tried an external USB CD drive with the Recovery disk, but it does the same (just spins). I even got a new Windows 7 installation disk (from another PC) to see if it will boot from it, but get nothing but a spinning CD I have not done anything yet to the HyperX SSD, haved not formatted or partitioned it.I thought this would be done by Recovery on the OS installationThe BIOS is set up to first boot from the CD drive, so the boot order is not the issue.
View 4 Replies View RelatedWhy Won't PC Boot From DVD Drive
Nov 17, 2012Now this should be simple to do but for some reason my PC just won't boot from a DVD (Windows7). I have a GIGABYTE GA-Z77=DS3H and I have changed the SATA mode to AHCI, and when I restart the PC I go into the boot sequence (F12), where I select my DVD drive but it just keeps booting from the C drive.
View 2 Replies View RelatedHow To Put SSD As Boot Drive
Sep 22, 2010Is it possible to buy this SSD , install windows to it for faster boot time and better windows score? If it is, how do I do that? I want all my programs/files/folders just as it now...Would I need to like 'uninstall windows' from my current drive (only have one), or can I just take out my current drive, put in SSD, install windows 7 and put my current drive back in again?
View 4 Replies View RelatedUsing SSD As Boot Drive?
Jul 8, 2011I just got done setting up my new Crucial SATAIII 128GB SSD drive and another Western Digital SATAIII 500GB hard drive for my system. I have them both on SATAIII connection speeds and everything is very nice, but how do I make it where I have ALL of my Program Files and dumps on the Western Digital and only the Boot and main files for the SSD? I am a gamer, and I use Steam. So, I think we all know that I don't want Steam to take up 95% of my SSD drive.If anyone can direct me to a tutorial or something, that would be great. I have tried the method of changing the registery on making the default location for all Program Files to drive F:, the Western Digital, but this simply isn't working. Steam won't connect to the servers and Microsoft Security Essentials won't run at all.
View 4 Replies View RelatedWhat Is X:(boot) Drive?
Oct 23, 2009I guess it's a kind of PE?
Even if I've uninstalled 7 it's still there.is the uninstallation incomplete?
And,where does it reside in my hdd?How can I delete it?
Pc Always Boot From The C Drive?
Mar 10, 2011can I boot XP Pro from C drive and Windows 7 from D drive?
View 3 Replies View RelatedCannot Boot Win 7 Without CD In Drive
Nov 29, 2009I successfully installed windows 7 from 32bit xp. I didn't reformat the partition I installed windows 7 to.
Then windows would not boot without the windows 7 disc in the drive, even though it skipped boot from CD. If I removed the CD it told me ntoskrnl.exe couldn't be found. I deleted windows.old folder and the problem seemed to go away.
I have 3 Hard drives. 6000GB (disc 0 ) 300 GB (disk1) both SATA. Then I have a 80GB IDE drive disc 2 as reported by disc management. My BIOS boot order is DVD drive then Hard Drives.
Disk 0 hosts the C: boot,active,pagefile, primary partition, and a partition F: of data files. Disk 1 hosts two primary partitions of data files.
However disk 2 has a single partition listed as the primary, active system partition. Its probably left over from ages past when it was my old windows install location for xp several installs of xp ago. A long time ago xp was installed on this drive. Then I upgraded and installed XP into what is now disk 0. I did delete the partitions of the drive 2 at one point under xp and set a single new partition....
But now I did a BIOS update and again the problem has returned. Of course windows.old didn't come back. I have disk 0 (with windows 7 installed) set first in the boot load order for harddrives, but I can only get windows loaded by leaving the install disc in the CD drive.
I tried removing disk 2: the IDE drive. Again same message. This time it boots from the DVD and windows startup repair doesn't detect ANY installations of windows. I ran it anyways, it detected/fixed nothing rebooted to the same thing. When I removed the install DVD
plug back in disk 2 and windows 7 boots up with the install disk in the DVD drive.
so I tried using the automatic repair and that failed...
I don't know what to do now, windows won't let me reset partitions, and the automatic start up doesn't detect my installation without disk 2 plugged in.
I would like to remove disk 2 entirely from my system, and have windows 7 booting properly without that drive install in anyway. I hope I can avoid a system as it was a long process to get everything up and running.
How To Boot Using Different Drive And XP
Aug 13, 2011I have a laptop runnung WIN 7 home prem. IS it possible to boot it up using an external drive that is out of my old sysem running XP pro, and be able to install and run new XP programs? What pitfalls are there. Im not real savvy with everything. Can't remember what keys to hold to get to the BIOS on startup.
View 6 Replies View RelatedWin 7 Boot - XP On Other Drive
Feb 19, 2010Here is the current status of my PC:
- Originally installed with one HDD (1) with Windows XP on it
- I then added a second HDD (2) and installed Windows 7 on it
- My boot menu now lists "Earlier version of Windows" or "Windows 7" as my two options
I want to format HDD1 and get rid of XP. However I believe the boot information is on HDD1, as when I change the boot sequence to start with HDD2 I get an NTLDR error.
Am I correct in thinking that all I need to do is change the boot sequence to go to HDD2, and use bootrec /fixmbr to write a fresh Windows 7 boot record to HDD2? Thus losing the dual boot menu and enabling me to happily ditch everything on HDD1?
Also, if I go into Disk Management in Windows 7, HDD1 is "System, Active, Primary Partition". HDD2 is "Boot, Page File, Crash Dump, Primary Partition". Do I need to do anything here?
Sorry for all the questions but I just want to get this right first time, rather than create myself a problem which I don't have the skills to solve.
Can't Boot From CD Drive
Nov 4, 2009I am unable to boot from cd rom even though I have made changes in the bios to enable this, has anyone any ideas,.
View 9 Replies View Related