The Generic PnP Monitor driver is flapping like there is something wrong with the monitor. It keeps trying to redisover the monitor and blanks out the screen every 30 seconds or so. Very irritating. I am running a Westinghouse LCM-22w3 22" HD monitor through a Belkin KVM Switch. This does not occur on my XP machine or my Linux server only Windows 7.
View 1 RepliesI have a HPE-500f pc hooked up to my vizio V551XVT and all that comes up is generic pnp monitor, is that the correct setting and if not how do I change it
View 7 Replies View Relatedhow do i remove the generic pnp monitor in and install a gateway fpd1530 monitor drivers? nothing else is there win7 or window xp same problem
View 6 Replies View Relatednew to the forum and new to Windows 7 and new to laptops so please be patient.
I bought a lenovo g550 laptop a few weeks ago.
it came with Windows 7, I have downloaded all the relevant Lenovo drivers and updates
and installed all of them!
My problem is that Windows 7 recognizes the screen as generic pnp monitor and doesn't let me change the refresh rate above or beneath 60hz.
My screen is flickering in the background and it is annoying as hell!!
is it because of the refresh rate or is it something else?
I cant find drivers for the screen anywhere !!!
I formatted my dell studio 1749, since then, the resolution cannot be set to my desired resolution, the highest is 1152 x 864, which is ok with me. How do i get the driver for this. display is; Generic PnP Monitor on standard vga graphics adapter.
View 6 Replies View RelatedOK as Ive been looking around the site Ive noticed that there are many issues like this one, and Im sure there are plenty of people out there that have this problem.
My "Windows Experience Index" is at a 1.0 only because my Graphics, and Gaming Graphics rating are at 1.0. Everything else is at 5.9 which I can live with.
When I look at my adavanced settings for my monitor it Shows my Nvidia GPU but only running with 14 MB total avail mem. And I know that NOT right. Unfortunatly when I went to Nvidia's site and ran the auto detect it said that I didnt even have their product and that I had the Standard VGA Graphics Adapter.
I can't seem to find the right drivers for this to fix it all, and I would love to be able to "Experience" Windows 7 at its fullest. Any help would be greatly appreciated. Hopefully the attached photos will give you an idea as to what Im working with. Also When i toubleshoot Aero Ive received this message:
"The current video card may support Aero with a driver that is compliant with the Windows Display Driver Model (WDDM). Contact the manufacturer of your computer or video card for a WDDM-compatible driver."
And when I try to change my screensaver to a 3D one it states that I either need a newer graphics card or one that is compatible with Direct3D.
I recently aquired a Sansui SLED2453w monitor, and it ran fine for a little while, but now it's set to a resolution of 1280x1024, and is labeled as a "Generic Non-PnP Monitor". This resolution is OKAY, but it's the highest that Windows is allowing me to choose,without saying it's unsupported. I had it running on a above 1700 resolution when it worked. I've tried updating it's driver, "detecting" it, and a couple other methods.
View 6 Replies View RelatedI've built myself a PC and run into some problems with the display resolution.
OS: Win 7 x64
Graphics Card: XFX/ATI Radeon HD 4550 512MB PCI-E 2.0 VGA/HDMI/Dual-Link DV
Monitor: Hanns G HZ194
Display Adapter: ATI Radeon HD 4550
Monitor: Generic PnP Monitor
Current Resolution (I guess) is 1024x768 although the settings show that I have selected the recommended 1366x768. Everything is moderately big and chunky - not safe mode though. Is that the Generic Monitor is causing the problem. How I can get a sensible resolution. It's causing me some big problems as some of my applications don't fit on the screen properly and don't have effective resize/scroll bars.
I have two HP PC's, both connected to a IOGEAR USB KVM Switch. My Home Desktop is an HP Pavilion Elite HPE. My Work Laptop is an HP 6530b. The monitor is an HP 2010i. The home desktop is running Windows 7 Home Premium, while the work laptop is on Windows 7 Enterprise. The ideal screen resolution (and my preferred) is 1600x900. My Desktop Pavilion never has any issue with proper screen identification. My Work Laptop 6530b, however, drives me nuts. Not every time, but probably about 50% of the time, when it boots up it does not recognize the monitor and instead changes the settings to Generic Non-pnp monitor. Then to make things worse, even if I go into Control Panel and click on 'Detect', it will find I have an HP 2010i monitor, but it still won't allow the proper Screen resolution (not high enough). If I reboot, SOMETIMES it will come up with finding the monitor and will then allow me to change the screen resolution to 1600x900. But of course every time I go through this, I have to re-arrange my desktop icons because they get scrambled every time the screen resolution gets changed.I cannot figure out the pattern of why sometimes I can boot up the laptop just fine with no corrections needed and other times the laptop will not recognize the monitor. All the drivers are up to date.
View 1 Replies View Relatedgeneric pnp monitor on standard vga graphics adapter?
View 1 Replies View RelatedComputer shows generic pnp moniter in device manager im not getting the fps i should in games resolution gives me my zoran tv. i updated my drivers to my best knowledge i believe and i have resolution issues and it wont read a second moniter. i have a Nvidia Geforce 550Ti graphics card, and a AMD fx 6100 6 core processor from cyber pc. i dont know if that helps but. i cant get this resolved.i also have it hooked up with hdmi cable for the tv hook up. for my second monitor VGA cable.
View 4 Replies View RelatedGeneric pnp monitor windows 7 32bit driver download?
View 1 Replies View RelatedEverytime I create a Restore Point, I notice that "Generic Volume Shadow copy" is listed in the Action center. Should I be concerned? I don't remember seeing that listing before.I have a done a couple of System Restore points but none of them show up in the action center as "Generic volume shadow copy."
View 2 Replies View RelatedI have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
View 3 Replies View RelatedI have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
View 5 Replies View RelatedI am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D
Windows 7 home premium 64-bit
AMD Radeon 6520G
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
I have the generic icons on my desktop. I have searched and found a few "fixes", but none seem to work for me.(I need to comment here that my computer is different from all others in the world")I am going to try to put a method that is supposed to fix this problem, but is does not work. When I get the task manager screen it has something like "C:system32 ame" that I have to leave, it will not go away. When I enter the information it does nothing.Well looking at the situation I want to know that all the icons of the application are turned in to generic icon or all the icons which are associated with Microsoft. I am providing following solution to rebuild Icon Cache Database. Well you have to run this command on command prompt of your system. Copy paste the following command and see the results.To launch the command prompt you have to click on the Start menu and enter CMD in the Run and press enter.
View 6 Replies View RelatedOne of my application icons (3DS Max 2012) has gone generic. This is true for the original application and its shortcut. Double clicking still opens the app; I just wonder why this is happening? (Let me stress that I'm talking about the App.exe itself, and not the files created by the program.)
View 9 Replies View RelatedInstalled fine lights on but cursor doesnt move or respond in any way am I doing something wrong?
View 3 Replies View RelatedWhen I check for latest drivers on the toshiba website, it says that I have the latest ones installed however when I check intel and realtek, they have newer version generic drivers. At the moment my sound and graphics are very laggy and distort quite often when listening to music or watching films.Should I update the drivers with the generic ones or just stick to the OEM toshiba ones?
View 2 Replies View RelatedI know how to
1. Find out how much memory is being used by each Svchost
2. Find out what processes are running under each Svchost
3. Identify the Process ID (PID) for each Svchost
If a Svchost has multiple processes running under it how do I find out how much memory each of those processes under a generic svchost is using?
1. Click on the Windows world ball
2. Type "command prompt"
3. Right click on "command prompt" and run as Adminstrator
4. At the command prompt first type in "tasklist /svc". This will give you the "Image Name" "PID" and "Process(s)" for each PID (Product Identification Number)
5.Follow the method described below for each Process that you want to isolate.
Creating an Isolated Process.What this method really does is modify one of the registry parameters for the service in question from a shared process to an isolated process. The command syntax is fairly straightforward and uses the sc config command set: sc config <service name> type= own. So for Windows Updates (wuauserv), the command would be: sc config wuauserv type= own. Note that there is a space between the '=' and 'own' - you must insert that space.
6. Reboot
7. Now repeat steps 1 - 4 below the double dotted line above
8. Verify that the "Process" that you wanted to isolate has its own PID
9. Type in Tasklist /FI "PID eq xxxx". Where "xxxx" is the number of the PID that you just isolated.Make sure to type in the quotes as indicated.
You will now be able to see the memory usage of the process that you just isolated. Note that the image name will still show as "Svchost.exe". To verify that you are looking at the correct PID, you can run "Process Explorer", go the PID in question, right click, left click on Properties, left click on Services and you will see the service that you just isolated. Does isolating a service out of a Svchost and creating its own Svchost change the total amount of memory that your system is using? I would think that it would because you are adding an additional Svchost for each process that you isolate.
i just got this new controller but i cant seem 2 get it 2 work?
View 9 Replies View RelatedWhere on the Win 7 RC 64 bit installation disk can I find its Generic NIC Card Drivers. My install disk points me to the System32 Folder but stops there. Can anyone lead me to the correct Folder and File Name for these Drivers.
View 2 Replies View RelatedWe used to have for most Audio drivers back in XP days a decent equalizer.Now all we have it seems is a basic Volume control. I just want the OPEN MIXER on the bottom task bar to have some basic equalisation like it did with XP.Any decent FREE generic equalizer -- I KNOW if I'm using VLC or Winamp they have their own equalizers and they work so my Audio (connexant HD) must have the facility available somewhere.I have some applications that just deliver "Bog standard Sound" to the on board sound card -- I'd like to be able to adjust the sound with a decent equalizer - seems we've GONE BACKWARDS here from XP -- the rest of Windows 7 is fine.
View 3 Replies View RelatedGeneric MP3 player for windows 7
View 3 Replies View Relatedi'd like to know how i can fix the problem of generic bluetooth adapter ,network controller and unknown device for the laptop HP 635 for the first use
View 1 Replies View RelatedWell, I just found my old PC Wheel (Speedlink 2in1 Force Vibration Wheel) and I wanted to try it out. I remember, that it was working on my gaming pc, when it had XP on it. Now it has Windows 7 and it recognises it as a Generic USB Hub, not as a game controller. I tried to reinstall drivers, even the whole pc. But without any results. The wheel is working, I tested it on my laptop, which has Windows 7 too, but also it has USB 3.0. Maybe that is the reason, why it isnt working on my gaming pc? Its not working even on my friends pc.
View 9 Replies View RelatedI have a multi-function card reader installed in my computer and it will not read any of the flash cards I have, this card reader has USB connection on the front which works fine. I am attaching a screen shot it is the generic USB Hub right under Universal Serial Bus controllers that is the cause of this problem. As you can see the the Sony cam USB device on this hub is working fine, but I cannot plug in any CF Flash XD or SD or MS flash card to the reader they are not seen. I have disabled the reader restarted the computer no luck. I am sure it is a realtek card reader I have tried installing latest driver from realtek with no luck. This was working fine in the past in fact the realtek drivers also worked and showed up in device manager.
View 9 Replies View Relatedcrash comes when i'm online with wifi (i try various driver version of 4965agn)
OEM Os
-5 years hardware
-2 months Os installed
This laptop has Windows 7 Premium Installed. I want to install a HD Audio Driver of my choice.
When I uninstall the Generic Windows 7 HD Audio Device Driver The driver is automatically re-installed on restart.
Windows 7 Premium does not have GpEdit.msc installed. An earlier version I came across (version 1.0 on the internet) has limited capability.
How do I prevent Windows Windows 7 from Automatically installing the driver?
Is there a registry entry I can edit to prevent installation of Generic Drivers or specific Generic Drivers i.e HD Audio Device Driver.