Freezing After Boot From Drivers Not Loading?
May 22, 2012
my laptop running 64 bit windows 7 started freezing. Restarting helped for about 10 minutes, then it freezes again. I looked at my system log and noticed a couple errors, the most serious of which said that these boot-start or system-start drivers failed toload:CbFSctxusbmdiscacheMpFilterNIPALKnipbcfknipxibafnipxibrcSolutospldrVBoxDrvVBoxUSBMonWanarpv6I'm currently running Malware Bytes and GMER in safe mode, and it's not freezing
View 1 Replies
ADVERTISEMENT
May 5, 2009
I'm installing the official MS downloaded 64-bit build 7100 RC (released May 5). I'm installing onto an Athlon 64 X2, 4 GB RAM, etc. I have integrated graphics card that I'm using to get it running, before trying to get my ATI 4670 to work. The int. graphics card is an ATI X1250 chip.
When I just boot it, everything loads fine, but the Windows screen is mostly white with black lines through it. You can see where textboxes are, but not what's in them. The mouse cursor is fine throughout. So, I figured my drivers were just bad.
So, I tried to load the system via the Windows 7 boot disk, then go to the Repair Windows option. This all works fine and the screen looks normal. I open up the folder with my drivers (downloaded directly from Gigabyte today), and select my .inf file. It brings up a list of drivers to install. I click on my chip (again, the X1250), and it loads for a bit before saying the driver failed to load. So, I don't know what I'm doing wrong here other than just being SOL. Any thoughts?
View 0 Replies
View Related
Jun 6, 2012
I recently built a new computer and only had 2 SATA cables, so I had my SSD and HDD plugged in. This morning I went to plug my dvdrom in. I realized my HDD was plugged into a SATA2 port so I switched it to the SATA3, and plugged the dvdrom into the SATA2 port. I was always told it isn't a problem. A few hours later. I get bluescreened (happens every couple of days). But then I get a disk read error ~20 min later... I don't know if it matters, but then my main program crashes ~15 min later. After reloading it, ~15 later again, I get thick vertical *fuzzy plaid-like* lines and comp freezes. Restarted and now I'm experiencing where my computer freezes within a minute or two,with those huge vertical block lines. (I've seen similar when someone overclocked their GPU too high) I am not even running apps, just turning it on and this happens... Haven't done updates in several days. System is in my sig. I didn't build it, my tech-savvy friend installed everything. Windows 7 64-bit.
View 1 Replies
View Related
Sep 29, 2011
windows freezes at the logo screen when it starts growing. just got on after 4 days of working on it. tried booting with disc but came to a black screen with a white under-score then message came up saying the BOOTMGR is invalid? Is there some sort of CMD command I could use to fix this? or another way of booting? I tried doing windows repair numerous times, went into bios and reset everything to default making sure everything in use that was needed was on, did memory check, tried reinstalling from win 7 32 bit disc but didnt have any drivers that i could find on the browse tab
View 1 Replies
View Related
Jul 5, 2011
logo screen when it starts growing. just got on after 4 days of working on it.tried booting with disc but came to a black screen with a white under-score then message came up saying the BOOTMGR is invalid? Is there some sort of CMD command I could use to fix this? or another way of booting? I tried doing windows repair numerous times, went into bios and reset everything to default making sure everything in use that was needed was on, did memory check, tried reinstalling from win 7 32 bit disc but didnt have any drivers that i could find on the browse tab.
View 2 Replies
View Related
Jun 27, 2012
At the moment, my Windows 7 machine is freezing, up to a minute, then resuming normal operation for about 30 seconds, then the freezing continues. I'm not quite sure what is causing this. Also, when the computer is having a clean streak, without freezing, occasionally windows take a very long time to open.As for recent things I have done, I've just attempted to update Steam due to an error, but other than that, nothing else major has been done to my computer.
View 1 Replies
View Related
Feb 5, 2011
I had to perform a force shut down today, upon restart win 7 attempted to load up but got stuck on start up page, again performed force shut down to see if it would load up but with no prevail. if left for 40 min or so it will finally get to login/password screen but after password input nothing happens.I have tried start up repair F8 but again after completion the screen freezes. also where there where more options such as safe mode these have know gone and i am only left with start windows normallyrepair modei did carry out a safe mode but it froze half way through and know that option has gone.i have no backup disk but i did backup win 7 to my external hard drive but am unsure wheter i can load from this.my lap top details are as follows.
View 1 Replies
View Related
Oct 16, 2011
my computer started freezing on on the windows loading screen, so i had to turn my computer off again, wait a few seconds and start it agin, it then worked on the second time. i couldnt get into any kind of safemode.when i got into windows i had loads of generic win32 errors, i couldnt acess the internet or any anti spy/virus programs. i shut it down and it hangs so i have to manually swith it off.i was on xp so i thought i would format my computer and install windows 7. This has helped with all the win32 errors but my computer still freezes on start up at the windows loading screen and still requires me to swith it off and restart it, this works most of the time. might have to do this 2 or 3 times.i have looked in the events viewer and it says i have 3 errors: error 6 kernel process power / restart manager.
View 3 Replies
View Related
Mar 6, 2010
Just installed my new rig and trying to get Windows 7 on it. I'm using an Upgrade DVD from Acer 64-Bit, and trying to boot from the CD-ROM setting in BIOS or boot mode. I am unable to get past the "Starting Windows 7" screen with the logo. It just freezes there or loads and goes to a black screen. I don't have other OS DVD/CDs to try out other than the old Windows 7 RC I had a while back. That wouldn't load either. Now I tried to use a different DVD-ROM and it wouldn't load either. What could be the problem?
View 2 Replies
View Related
Nov 15, 2009
Ok, so iv put this computer together, installed windows 7 Ultimate 32bit and i got it up and running perfect for like a day.
The next morning i switched it on and was working good for couple of hours then it seemed like the whole computer started to slow down and i got a blue screen error. so i rebooted and tried to start windows but, it then says windows is loading files then goes to the logo loading and after that it just goes to a black screen!? iv tried everything to get it back running safe mode, low res mode, repair, boot from disk etc but nothing.
So i thought i would try and put the HD in another computer and wipe it to re-install windows but when i put it in another comp it does the same thing.. does the logo loading and then to black screen
Iv found that when i remove the HD from my PC and boot from the windows 7 disk then it gets to the windows 7 installation bit so do you think it could be a problem with the HD?
View 2 Replies
View Related
Jan 21, 2012
Fresh installation on a raid 0 array and I am at the pre-load drivers step.I have no idea which drivers I should be loading here (if any)The RAID is 2x Vertex 3 120GB SSDs on an ASUS P8Z68-V PRO motherboard. (i7-2600K chip)I've done a complete install without pre loading anything and it all seems functional - except a couple weeks after install upon boot up it shows one of the drives in the array as Error Occured (0). Again everything is functional but still annoying.
View 2 Replies
View Related
Dec 9, 2012
I haven't touched this laptop in a while. I received a virus which then slowed down my computer and made it really really slow to get into the windows log in screen. It wouldn't go past that. Now, 2 months later, I'm trying to install Ubuntu as my only OS. I hope this will get rid of whatever past problem I had. Is this true? The problem with this, is when I power it up and turn it on, the computer only goes to the "Toshiba Leading innovation" H2 BIOS screen. From here, the laptop screen keeps turning black/blank at random intervals (the disk drive kicks up after it turns blank). The screen returns to the BIOS screen... and I keep hitting F12 and nothing.
View 4 Replies
View Related
Dec 6, 2009
So this is not the first box I've built but it is the first time I have not been able to boot easily for so long. The symptoms are that it hangs at the windows logo on the start screen, most times. If I do a safe boot, then sometimes it will boot successfully afterwards.
I can play Call of Duty 4: Modern Warfare, watch movies but opening a picture would cause a BSOD. I fixed the last symptom by reseating the card and installing the latest driver (195.62) while only the vga monitor is connected. It still hangs at the start screen though on a cold boot.
I have used the Windows 7 mem test to confirm it's not memory. I have then done a boot log (ntbtlog.txt) and I can see the following lines repeated as it tries and retries to load drivers:
Did not load driver @hal.inf,%acpi_amd64.devicedesc%;ACPI x64-based PC
Did not load driver @cpu.inf,%intelppm.devicedesc%;Intel Processor
... (more of the previous line)
Did not load driver @oem6.inf,%nvidia_dev.05e3.01%;NVIDIA GeForce GTX 285
This happened on the driver that came with the device too. I can tried repair installs and clean installs of my OS. I tried deleting the driver altogether and then letting windows load a driver for it and same result. Aside from sending the card into the manufacturer for testing, are there any ideas out there on what i can do?
Sadly, I am actually enjoying the challenge. Mostly because on the rare occasion I can boot normally and use my pc normally and leave it on for easy's sake.
View 9 Replies
View Related
Mar 10, 2011
Just after booting-up my system is prompting me that two dll files are not loading. I have investigated the necessity of the dll files and they have no relevance to the OS or anything I am using. How would I stop the system from attempting to load these files?
View 9 Replies
View Related
Nov 9, 2012
My PC goes through the BIOS stage and starts to load Windows 7, the GUI comes up and then it just stays there, goes into space with nothing happening. I have booted in Safe Mode and that works, but it won't boot into Safe with Command Prompt or Networking. I have tried the Repair my Computer option but that did not fix it. Then I did a System Restore but that did not fix it either. Not sure as to what to do next.
View 2 Replies
View Related
Sep 16, 2009
My problem is that windows 7 wont get past the loading screen when its loading the OS. I have noticed that it will work when i have only 2GB(one stick) in but when i try to put all 8GB(4 sticks) in, it wont work. This same thing happened when i was trying to install windows 7 from a fresh install.
View 9 Replies
View Related
Jun 23, 2010
I have sony vaio laptop and i was running windows vista on it. I did a partition and dual boot the system with ubuntu 10.4. Then i download easybcd tool to set windows vista as a default OS to boot with, but accidently in easybcd software i unistalled vista boot loader. now when i reboot the system ubuntu works fine but when i try to load vista its says NTLDR is missing Press Ctrl+Alt and Delete to restart. Then tried to boot from cdrom because i have a fresh copy of Windows 7. the system doesnt boot from cdrom. So now i am stuck with ubuntu on my system.
View 1 Replies
View Related
Jul 28, 2011
I like to use my mouse on the left side even though I'm a rightie, so I have the primary buttons switched. Unfortunately, Windows 7 loads that config almost at the end of the boot up process, which of course is annoying if you're trying to click on a few things while the boot finishes (and not knowing which button to use
View 2 Replies
View Related
Aug 27, 2012
My computer wont boot, it went from being really great, to not being able to boot within a 4 hour time span of me being away.
The Problem is, not only limited to it not being able to boot, but also i cant run it in safemode (in any of the safemode configs)
I had a breaktrough a few hours ago, but it looks like its reversed, i got into the OS but everything was running incredibly slow at times, sorta like a 5min normal speed that it used to run with, and then 5min were it bearly does anything.
Where it crashes:
Starting Normaly: Windows Logo (Appears fully)
Safe Mode: Loading the "Classpnp.sys" file
Repair Tool: Attepting to repair
Specs:
Graphics Card: Pallit Geforce GTX 670 2GB DDR5
CPU: Intel i7 3820 3.6Ghz
MB: ASrock x79 extream4
PSU: Corsair Gaming Series GS700
Ram: Corsair Vengeance - Hukommelse - 8 GB : 2 x 4 GB - DIMM 240-pin
View 9 Replies
View Related
Jun 10, 2010
I really want to go back to a dual install (Windows 7-64 Pro and Windows XP) but I want to add XP to Windows 7 which is already loaded. I know how to load Sata drivers when loading XP first (have drivers on CD) but after looking at the tutorial it mentions adding Sata drivers to XP using 3.5 disk. I do not have 3.5 drive. HP Pavilion a6130n/3 internal 1TB drives. XP and 7 will be on separate hard drives.
View 8 Replies
View Related
Dec 7, 2010
Loaded 7Ultimate and got to Install screen. Selected drive and made new partition. Clicked next. Received error: Quote: Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more info. I don't know how to get to the logs, but what does this message mean? I have tried almost 6 or 7 times and even once with my 7 Home edition disk. Ran the startup repair a couple times. Tried formatting the drive from my XP Pro sp3 disk.So now here's where the real problem comes in: ERROR LOADING OPERATING SYSTEM. Now I can't get back into XP! Tried booting from ERD Commander 05, but I get an error code 4096 with that, and "File SETUPREG.HIV could not be loaded".How can I get XP back to booting properly? Maybe it's a faulty hard drive and needs returning. But it is extremely important that I get this computer back up and running immediately.
View 5 Replies
View Related
Mar 14, 2012
The first problem was that it kept booting into the windows startup repair. For a split second i can see windows 7 loading but then it automatically went to the startup repair , after many many reboots i opened the command prompt in windows startup repair and tried fixing the master reboot.Now it gets stuck at loading operating system.Even when i try to boot from the windows 7 CD and Truecrypt rescue disk it still gets stuck at loading operating system.The whole harddrive was encrypted with truecrypt and it use to go to truecrypt bootloader after loading the operating system but it doesn't do that anymore.
Specs :
mobo : Gigabyte GA-890FXA-UD5
cpu: phenom ii x6 1090t
gpu : radeon hd 6950
hard drive : western digital black caviar 1TB
View 2 Replies
View Related
Jan 29, 2013
I am attempting to reinstall windows with files burned from an .iso onto a blank disc but when I press f12 then go into CD-ROM it goes to the next screen and says: 'Loading Operating System... Boot from CD/DVD..' Then it will boot normally.
View 8 Replies
View Related
Apr 12, 2010
Basically what happened is my vista drive died. This was the first drive with the MBR on the system. I had been using the Windows 7 raid (Nforce) for a while with no issues until the vista drive died in a fire. So my current problem are as follows:1.When I toss the Windows 7 DVD in the drive and attempt to load the NForce drivers for my system (needed for the repair procedure), I get failed to load drivers. Yes I have ensured to point the Windows repair utility to the correct files on the CD that came with the board (XFX 750i). They will attempt to load but just fail.So my question now is how do I get my RAID 0 setup to boot? There is no MBR on this disk. Is it possible to write the MBR to the disk once the drivers finally get loaded?
View 6 Replies
View Related
Feb 26, 2012
my Dell Studio 1555 laptop will not boot either into regular windows or safe mode.When booting into safe mode, the very last file that will load is "CLASSPNP.SYS".When that happens it will stay stuck loading the next file for a few minutes, then restart itself into the Windows Error Recovery screen.When I try start-up repair, it goes to a blank black screen and repeats the procedure above (ie. it gets stuck and restarts a few minutes later) When I hard-shut down by pressing the power button, a BSoD appears for a fraction of a second right before it dies.What could the problem be, and what can I do to fix it? I have the windows 7 install disk, if needed. Should I go ahead and try an installation repair using the disk?
View 5 Replies
View Related
Sep 18, 2012
AOTBE, this doesn't happen at all when I have a normal PS2 KB/Mouse plugged in. However when I replace that with USB KB/Mouse there is a problem. This has been happens whether I use my Logitech USB KB with Logitech Mouse. And the same with Razer KB and Razer Mouse. So I'm presuming this happens with any KB/Mouse plugged in by USB. I'm in Windows. I hit reset, and it freezes at the post. I'm in Windows. I shut down the PC. The next time, I power it up, it goes through a really really long boot to Windows. Then the screen goes blank. The only way to resolve this is by completely powering off my PC. Meaning I shut it down. Then flip the switch on the PSU to off. Only when the power to the PSU has been switched off will the PC boot all the way into Windows when turned on and powered up. And even in this case, it takes a pretty long time to boot. IDK if Windows 7 normally should take that long.
View 4 Replies
View Related
Nov 20, 2012
So for the past day I have been having a problem with my PC. I booted it up and within two minutes the whole thing froze, I couldn't Ctrl-Alt-Del or anything, so i figured something just went kaboom and decided to restart. Same thing happened.. so I decided to boot into Safe mode. The safe mode boot worked fine and I've prob alley booted into Safe Mode at least 20 times the past day and it only froze once.I don't know if this is a driver issue or a hardware issue or what, but It's really frustrating. I have run MSE and it can't find any viruses. Also, when I try to play music/or open a file,my computer hangs and it takes like 20 seconds of the little circle loading mouse icon for anything to happen, and sometimes this will also trigger the computer to downright freeze.
So far I have tried :Going into MSCONFIG and disabling startup/processes = Did not work System Restore : Delays the freezing for a little while but it comes back after a couple hours, the Hdd/sdd hanging is still present = did not work Ran a chkdsk = said it was fine Ran the WD HDD Diagnostic tool = said hdd was fine Did something called sfc /scannow (i think that's it) ... = said i was fine This is a custom built PC i made and I have had it for a month and a half, I also checked for loose cables but did not see any.
Specs :
CPU: i5 3570k
GPU: AMD Radeon 7970
SSD : Samsung 830 128gb
HDD: WD Black 1TB
Ram : 8gb g.skill Ram
PSU: 750w OCZ
Mobo : ASRock Z77 Xtreme4
OS : Windows 7 64bit
Also, I have checked eventviewer and I get a lot of errors but they don't make sense and I don't think they are the problem.Error examples: The driver detected a controller error on DeviceIdeIdePort0. source: atapi Error Id: 11 NEXT Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. Source : WMI Error ID: 10
[code].....
View 1 Replies
View Related
May 9, 2011
I was attempting to run chkdsk and went into Safe Mode -- no problems discovered. However, since then whenever I boot / reboot laptop Safe Mode screens reappear. Thinking back I don't recall any guidelines from any Win7 tech sites advising turning off Safe Mode. So, I initially assumed Safe Mode automatically reverted to the prior mode -- apparently an incorrect assumption. How do I get back to Normal Windows Start Up for Win7 Home Premium x64?
I got out of Safe Mode to restart somehow -- ESC key -- I did not force quit by turning off. Since then system now starts by scrolling thru 2-3 screens of "Loading: ... (various driver drive locations / various names)" and then Win 7 login screen comes in with Password box.
Everything else is running fine now except I suspect I need to go back to boot Safe Mode screen and turn Safe Mode off -- return it back to Start Win 7 Normally.
View 1 Replies
View Related
Feb 9, 2011
I have installed windows 7 on my computer about a year ago. I've never had any problems to the point where I would need to reinstall the OS, however, I've noticed that on cold boots the system runs painfully slow, it will boot up fairly fast on a normal restart tho, like 20-35 seconds. On a cold boot it can take about 1-2 minutes to load in windows, and then once that happens its not so much it going slow as that there is a point during which I cannot click anything or else it will take forever to accomplish.
What I mean by this is, it will load to my desktop and for a period of about 3 more minutes I will try to right click on the desktop and it will do the circle thing for like 20 seconds before giving me the drop down menu. If I right click again right after, it shows up instantly. Same with trying to open up a file within those first couple of minutes. It will take like 45 seconds to open a picture. I have tweaked my windows 7 to startup only necessary drivers and turned off search index along with Aero.
My HDD isn't fragmented and I've got about 120gbs out of 450 available. So its not that bad. Now some of you may say, well its just loading the processes. But I only have catalyst control center loading up as a startup item. And even after it loads. It goes through a wierd 3-4 minute phase in which everything is slow as hell. Then works perfectly fine.
View 5 Replies
View Related
Nov 20, 2012
This morning i turned on my PC, and for the first few minutes it worked fine, but then it turned horrible. Everything froze when i attempted to click it or even hover my cursor over it. I tried to open task manager to shut down Firefox, but it took around ~20 minutes for task manager to open. Once everything was closed, I scanned with MBAM Pro and nothing was found, so I read about this on other sites. They said to clean the registry with a program called WiseCleaner. It took me 15 minutes to get it, but when it finished scanning it found 853 problems in the registry. I also defragmented the registry. Also, whenever I try to boot into safe mode, my computer freezes at CLASSPNP.SYS. Not sure what to do now, as no improvement was made.
Specs: Windows 7 Home Premium SP1, Intel Core i7 Q740, 6 gigs of RAM, ATI Radeon 5850m
View 11 Replies
View Related
Dec 26, 2012
I bought a Lenovo G555 laptop in new condition, and it can't be more than two years old. For quite some time, it's had several annoying problems. Most notably, it occasionally completely freezes; this can occur while using it, or when opening the lid after it has not been in use. The second issue is that the time it takes to boot up is no less than 20 to 30 minutes. This occurs whether the computer is restarted or booted up after being off.Here are the remedies I have already tried:
-Restoring to factory condition (several times)
-Daily antivirus scans (full scans once a week) with the most up to date virus definitions (I use avast! and nothing is detected)
-Full Malwarebytes' Anti-Malware scans with the most up to date definitions (no malware found)
I do not have an extreme amount of software installed, as I think I'm pretty careful about what I install on my PCs.On top of this, beginning today, Windows is now reporting there is a problem with the battery and it needs to be replaced, but the problems described above began long before this happened.
View 11 Replies
View Related
