When I turn on my E-Machines computer for startup I sometimes get a massage "Checking NVRAM and it hags there. If I pull the power cord and reinsert it the machine will come up properly.
View 2 Replies
When i startup my new-ish laptop (Dell 64bit i7processor running windows 7) i keep getting a black screen with a message in white letters reading:-
"Checking file system on C: The type of the file system is NTFS. Volume label is OS. One of your disks needs to be checked for consistency. You may cancel the disk check, but it is strongly recommended that you continue. To skip disk checking, press any key within 10 seconds."
When i didn't press any key to escape the message it remained static like that for over an hour. Can anyone explain what is happening and how can i maintain a healthy disk in the first place to avoid this message?
I was trying to backup my flash drive and all of a sudden, it did not work. I kept plugging my flash drive in and out but that did not work. Here is the error that I got."The last backup did not complete successfully because Windows Backup could not backup any of the drives in the backup. Make sure that the drives are plugged in and working correctly."The error above is the message when i backed up my flash drive. Here is the system informationTech Support Guy System Info Utility version 1.0.0.2 OS Version microsoft Windows 7 Home Premium, 64 bit Processor: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz, Intel64 Family 6 Model 37 Stepping 5 Processor Count 4 RAM: 7860 Mb Graphics Card: Intel(R) HD Graphics, -293 Mb Hard Drives: C: Total - 476937 MB, Free - 410972 MB; D: Total - 476937 MB, Free - 453231 MB;Motherboard: Dell Inc.,Antivirus: None
View 1 Replies View RelatedThe last couple of times I've booted up Windows 7, prior to launching the OS, It has felt the need to perform some sort of drive error checking task, and as far as I know, I haven't scheduled any 'checking for errors' type-tasks for my hard drive.
What's going on?
I am receiving an error message on my Gateway One ZX4300-01e. It continues to ask me to: Reboot and select proper boot device or insert Boot Media in selected boot device and press a key.I bought this computer on ebay. it was a seller refurbished item and does not have a boot recovery disk.
View 8 Replies View RelatedI have Windows 7, Live Mail. Mail with attachments come in with no problems, like photo attachments, but my mail will not go out with photos attached. They are not huge files. I get an error message "error/tasks" but then that screen freezes.
View 11 Replies View RelatedI can't boot to Windows 7. It says that Windows could not verify something about this object. Windowssystem32winboot.exe
Anyone got anyway to fix it so I can boot to windows 7?
PS: I used Vista Boot Pro, and for the boot loader option, I clicked Install Longhorn Bootloader. Could this be the problem?
I installed clean via USB flash this morning, Win 7 Ultimate.
Expanding files was stuck at 0% for a few minutes. So, I unplugged a single USB device and install proceeded. All readers take note of this SF learned 'fix'.
That is when I noticed that my DVD drive was spinning. I had neglected to remove the DVD after copying it to the thumb. I ejected the drive and the install interrupted.
Even though I specifically selected to boot from the thumb (via F8), I was indeed installing from the DVD. I did not recv the standard 'Press Any Key To Boot From CD/DVD'.
I am not willing to perform any tests on this at this time. A new clean install is likely in my near future as I continue to test VMs and other apps. But, I am curious. I will assume that I did not deviate from the process described above. I was neither tired nor stoned. I specifically selected to boot from the thumb.
Did Windows install see the DVD and make a jump from the thumb to the ODD?
when i put the cd of window 7 in cd rom there is no message to press any key to boot cd
View 3 Replies View RelatedI try to install Windows 7 on my system, but when i insert the dvd with the .ISO of windows 7 64-bit into my drive, i select boot from my DVD drive on start up, and the screen goes black, but nothing happens, and it starts my Windows XP.
Oh, and ive also re-burned the .ISO at the lowest speed, multiple times. No luck.
When I try to turn on my comp. I get a message saying boot disc failureinsert system disc and press enter.If I switch off and try again it usually works o.k.occassionally I have to try several times. What is wrong, and how do I fix it. Also, is it on the brink of complete failure?
View 9 Replies View RelatedI have window 7 64 bits works on hp pavilion dv3 laptop The problem is that every time I push F2 or F4 or F4 or F6 .....F8 F10 .......etc I see the "window boot manager " screen it does not work like before whereas every single key takes you to a specific screen How to get rid of this problem ?
View 9 Replies View Relatedbut I only have windows 7 64. Never had Vista on the machine. Just did a clean reinstall of windows 7 from my legal FULL disk. It has activated correctly.If I choose vista it still boots to win 7..
View 1 Replies View RelatedWhen I turn my machine on I get the Windows logo, then the screen goes black and a text message advising me that a disk check is occurring, and if I want to skip it I have to hit any key in X... seconds. If I let it run, it eventually goes to all black on the screen, the disk runs and runs - I let it run for two days once - and nothing happens.
If I "hit any key" as instructed it goes to the Windows boot and all appears to be well. I guess I shouldn't complain, but I really hate the whole "disk check" screen thing, and would like to get rid of it. How can I do that?
I recently reinstalled windows and now when I leave my computer for about 15mins it will restart itself and then on restart I get the following message:Realtek PCIe GBE Family Controller Series V2.39 (01/24/11) PXE-E61: Media test failure, check cable.PXE-E53: No boot filename received.I tried reinstalling windows again. Updating drivers, specifically the realtek ones.Also when I used my HDMI cable to connect to my TV as a second monitor it works for about 45mins then bluescreens.These all worked properly prior to reinstall.
View 1 Replies View RelatedStarting Windows 7 Home 64 bit by hitting the F12 key I get the Windows Boot Manager screen. And it shows the following error message:The Windows Boot Configuration Data (BCD) store file contains some invalid informationI would like to copy a clean slate of the OS to another HDD so i may as well fix the existing one first.
View 2 Replies View Related6 months ago I installed windows 7 on a new PC I built. I then decided to switch to a 64 bit system which I did. I bought another HDD and decide to add a second drive with windows XP.I ended up with a system which had windows 7 shown twice on boot up and only one would bring up windows 7. Windows XP was missing. I removed the second drive and it worked fine but I still had 2 Win 7 prompts on boot up.I have a virus or root kit which I can't find or remove so I decided to format the C partition and reload windows 7. The problem is although I have the bios set to boot from the cd with the Win 7 disk, it comes up with the boot manager missing message and I can't get around this.I tried another HDD and get the same message. How do I get rid of this problem where i can re install win 7?
View 1 Replies View RelatedI've got a new Samsung laptop. For about a month now whenever I boot up the laptop it says "installation may take a few minutes""please wait." The thing is it doesn't install anything at all and is a nuisance. Also I checked the windows task manager and all it says it is is a 'install'. How can I stop it?
View 3 Replies View Related(1) I installed a new 1TB Seagate Baraccuda 7200.12 Installation seems fine.SeaTools (ver 1.2.0.2 and ver 1.2.04) won't detect the internal drive but detects external usb drives ok.
(2) My two Seagate 500GB, 1TB externals record disk temps over 45�C & climbing after a couple of hours running idle with an ambient temp of 22�C. This seems way too high - what do you think? I have a couple of days left to return the 1TB.
i was wondering if i could get any tips or advice, i keep getting bsod error message when trying to install xp, it looks like i have to install the sata drivers, i think i have to slipstream the driver with xp as from my post here, but i cant find the sata driver for my toshiba hard drive anywhere. My sony vgn-aw120j does not have drivers for xp on the sony website and toshiba does not have drivers on theirs. my hard drive is a mk-3252gsx from toshiba,
View 9 Replies View Relatedlast night i turned off my computer all fine and working, then when i wake up and turn it on, it comes up with the Reboot and select proper boot device message, i cant access the computer to actually use it... and i dont think i have any windows 7 discs to repair it at all.....
View 7 Replies View RelatedI recently built a new rig and attempted to install Windows 7, yet when I attempted to install the software from the disk I received the message "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device". I have changed the boot order in bios (I have a Gigabyte Z77- D3H motherboard) but that has not helped, with it not booting from the drive with the disk in that I assigned.
View 3 Replies View RelatedWhenever I'm checking for any updates (vaio care or ATI) a pop up window appears "Internet explorer has stopped working". And error reporting fails. The process linked with it is werFault.exe. I don't know what to do.
View 1 Replies View RelatedEvery time I start my computer I get this message;Checking file system on C: The type of the file system is NTFS. One of your disk needs to be checked for consistency. You can cancel the disk check, but it is strongly recommended that you continue. To skip disk checking, press any key within(10)seconds.I have allowed it to continue numerous times, but it makes no difference, this same error comes up every time I start my computer, now I just press a key within 10 seconds and that gets rid of it.
View 10 Replies View RelatedI have a Toshiba laptop A500 series running Windows 7 Home premium 64 bit. the computer was purchased in May. I am using MSE and Panda as my anti Virus--and Malwarebytes also. I scanned with all of them yesterday and they say my computer is free form anything malicious. However 2 times this week including this morning at startup the computer is checking C. I am worried that something is wrong.
View 2 Replies View Relatedmy laptop is just at a black screen after the dell screen.
I clicked the error checking for the "C Drive" and "At Startup" and when i restarted it just went to a black screen after the dell screen.
I have restarted several times trying to get Windows 7 to startup with no avail. What should i do?
Its a dell latitude laptop with like 2gb of ram intel core 2 duo proc (not sure on speed)
Checking for recall for hp pavilion dv7
View 2 Replies View RelatedI was uninstalling AVG and my syatem would get the BSOD and xrash before I completed it.Eventuallt my whole system crashed and all I get is a message on a black screen fron Phoenix Technologies aaying 'Boot from BBS-harddisk'.Anyone know what this means and if this screen can be bypassed. I can't use f2, f8 or f12.
View 3 Replies View RelatedI have an Acer Aspire one. It came with XP and I have it dual booting into Windows 7 which is working well which I installed from a USB Drive as this model doesnt have a CD Drive.
In the main boot screen it says "Earlier version of Windows" For XP and "Windows 7" for windows 7. All was working well until yesterday...
Now I can't boot into "Earlier version of Windows" i.e. XP. It gives me the C:\windows\system32\config\system is missing or corrupt message. I can boot into Windows 7 fine but all of my work stuff is on the XP platform (I know I can access the files from "7" but I need to get it operational again).
Any ideas? Can I do a repair from the USB Drive?..I've tried a couple of things to boot from the USB Drive but to no avail. And I can't find the BOOT.INI file from XP (I think it gets moved to Windows 7's hidden boot partition when I installed it. I cant seem to access that partition either).
After i press the on button of my HP pavillion, a pause of a few seconds occurs before it will start up. I get a message critiaclo error for boot performance in the event file.
View 1 Replies View RelatedEvery time I boot up I get an error message that says, 'failed to load branding configuration'...what can I do
View 2 Replies View Related
