I try to install Windows 7 on my system, but when i insert the dvd with the .ISO of windows 7 64-bit into my drive, i select boot from my DVD drive on start up, and the screen goes black, but nothing happens, and it starts my Windows XP.
Oh, and ive also re-burned the .ISO at the lowest speed, multiple times. No luck.
I installed clean via USB flash this morning, Win 7 Ultimate.
Expanding files was stuck at 0% for a few minutes. So, I unplugged a single USB device and install proceeded. All readers take note of this SF learned 'fix'.
That is when I noticed that my DVD drive was spinning. I had neglected to remove the DVD after copying it to the thumb. I ejected the drive and the install interrupted.
Even though I specifically selected to boot from the thumb (via F8), I was indeed installing from the DVD. I did not recv the standard 'Press Any Key To Boot From CD/DVD'.
I am not willing to perform any tests on this at this time. A new clean install is likely in my near future as I continue to test VMs and other apps. But, I am curious. I will assume that I did not deviate from the process described above. I was neither tired nor stoned. I specifically selected to boot from the thumb.
Did Windows install see the DVD and make a jump from the thumb to the ODD?
when i put the cd of window 7 in cd rom there is no message to press any key to boot cd
View 3 Replies View RelatedI am trying to complete my order for a program I ordered and when I press the "complete your order" button I get this error message, "Invalid query recorded FROM IP: 98.221.136.43". I disable Norton software and tried again to order and still got this message.
View 1 Replies View RelatedWhen I went to use my computer this morning, I received "VCGFE is compressed press ctr-alt-delete" message. I rebooted the computer, and I'm receiving the same message. I tried to go to safe mode (F8) but that didn't work.
View 1 Replies View Relatedwhen I turn on my pc I get the follolwing error message "Reboot and select proper boot device or insert boot media in selected boot device and press a key".
View 1 Replies View Relatedmy computer desktop cant show the word press any key to boot from CD. it start it self then it cant find the disk
View 4 Replies View RelatedSo I built a new system, and created a bootable USB with Win7 on it, I've tested it on my previous comp to make sure it is bootable.I plug it into my USB slot (tried both USB 2 and 3 slots) and set the bios (F15) to boot from what it reads as a Generic Storage Device 0204.I reboot and then see "Press any key to boot from USB..." <-- 3 dots which immediately (<1sec) changes to 4 dots. And then the system hangs. Num and CAPS are both lit up, and cannot be turned off. Nothing else does anything.While I'm in the BIOS, the keyboard functions just fine. It's a USB keyboard plugged into a USB 2.0 slot (but also didnt work when plugged into a USB 3)
View 3 Replies View RelatedWhen it crashes the cursor still moves and sometimes I can move windows around but then it all shuts down and sometimes briefly shows a blue screen of death. On reboot I sometimes get this message and have to reboot again. "Reboot and select proper boot device or insert boot media in selected boot device and press a key"It's a brand new box just built last week but no warranty and I would not even know what part to replace if it's hardware related.I've attached a Hijackthis to the post if it helps but I don't think it's virus related at all.
View 4 Replies View RelatedWhen left alone..."Reboot and select proper boot device or Insert boot media in selected boot device and press a key"I have a new(ish) cpu that I bought last Christmas, it works great and it has not crashed on me whenever I am using it. However, when I leave it on overnight (usually when it is downloading something big), when I wake up in the morning I am greeted with a black screen with the words:"Reboot and select proper boot device or Insert boot media in selected boot device and press a key"When this happens I simply press the power button a few seconds to turn it off, then turn it on again and it boots normally. (pressing a key only results in the message being repeated)What infuriates me is that it only ever happens when I leave it on overnight so I don't know when and how exactly it occurs but it almost always does. Like I said earler, it never does this when I am using it as it works fine otherwise. It just won't stay on overnight when I need it to.
System info:
Windows 7 ultimate x64 (full retail, installed once from scratch)
Intel core i7 4200k
Nvidia Gtx 560ti
16gb RAM
Seagate 500gb hdd for OS, 2Tb samsung and 1Tb seagate hdd for storage (all internal drives; no external drives attached)
Connected via hdmi to Pioneer receiver vsx 1121 then to 42" 720p Panasonic Plasma Tv
I have a raid (stripe) hard drive and it was working fine and i turned on my pc and it states floppy disk fail and when i press f1 it states boot up failure.I have tried all the recovery options and system recovery takes forever and does nothing and it does not even have my drive listed in the option box in system recovery so i dont know what to do i don't wanna loose my data.
View 6 Replies View RelatedI have ASUS PC (model: P5MG-ZX). I want to install windows 7. How to make a proper boot setup. I tried many times but failed to set my boot setup. I tried to install windows through USB but pc starts normally. It's not showing me the option "press any key to boot from CD/DVD".
View 8 Replies View RelatedI am experiencing a big problem in installing any operating system on my computer, it doesn't ask me to "Press any key to boot from CD" and it directly shows as it is installing the software but after completing the installation it reboots and again re-starts installation.
View 4 Replies View Relatedi was trying to upgrade my windows7 from 32 bit to 64 bit. i downloaded the ISO image and burned it to DVD by right clicking on the iso file, then open with, then widows disc image burner. now when i try to boot with the DVD and i get the "press any key to boot from cd or dvd" message with a black background. but if i press keys nothing happens and it remains same forever. why it doesnt proceed further ? what to do?
alternatively, i tried pressing F11 during restarting, then selecting cd or dvd for booting and hiting enter, but then also it takes me to the black screen with the "press any key to boot from cd or dvd" message and blinking cursor, if i press keys nothing happens !
I have a 2 year old Dell Desktop with Win 7 (64-bit). Recently, over the last 2 months or so, my PC refuses to boot correctly. As I press the Power button for booting up, the the monitor goes into standby mode and remains black / blank, while seemingly the desktop boots behind-the-scene. I get no error beep or message optherwise. If i keep on pressing the ESC key immediately after pressing the power button, after a while, it proceeds with the normal BIOS check and booting process. I'm flummoxed. This happens 90% of the time, but then again, not 100%. What does the ESC key have to do with correct booting procedure and how come this happening to me at this stage. No new hardware change has occurred.
View 1 Replies View Relatedi am a newbie as far as computer hardware is concerned. after struggling for days to install windows 7 onto my new pc which came without and 0s installed,[code] it list the 465 which i use for storage but the 30gb where the 0s is installed dosent show. surely if the hard drive had a problem the 465gb wouldnt show as it an te 30gb makes up te 500gb? i tried selecting the 465gb volume enter and then exiting diskpart then it says BOOT MGR IS MISSING PRESS CTRL +ALT+DEL TO RESTART..so basiclly i have read almost all forums concerning this and followed most of the steps listed above for however mine says boot manager missing or corrupt, wen ever i run start up repair its says start up repair cannot repair this computer automatically.
View 9 Replies View RelatedI just installed a new window 7 ultimate os to my 32 bit system and I doing something with my disk management. I actually delete the 21mb unallocate space in my disk management. After that I do some my work and browse the internet and shutdown the system but when I again starting my computer. It will nor work only a message appear on screen ...
Boot manager is missing ..
Press cltr+altr+del to restart...
Again and again only this message ...
I try to go boot manager by pressing f2 ,f12,f8 it it doesn't work, only pressing delete button it shows some options. It try to install a new os but it is not reading my cd/dvd or usb. When it check options it shown a massage that they are disable. Some stuff to enable my usb, dvd port or any way to start my system....
Pretty much what happened is that my powersupply got messed up one day and just turned off my computer and I couldn't boot it back up. I ordered a new PSU and I installed it but now when I boot my computer I'm getting "Disk boot failure, insert system disk and press enter". I've tried putting in the installation disc and using the recovery options but my OS isn't listed/found and if I click load drivers I can clearly see both of my hard drives. I have already checked boot options as well. I was also using GRUB before this all happened as well because I installed ubuntu as a dualboot.
View 9 Replies View RelatedI have been getting problems when booting. Whenever I boot the windows startup animation stops until I press enter. Then it spots again for a couple minutes until I press enter. I tried clean boot and safe mode which did not help.
View 8 Replies View RelatedI am receiving an error message on my Gateway One ZX4300-01e. It continues to ask me to: Reboot and select proper boot device or insert Boot Media in selected boot device and press a key.I bought this computer on ebay. it was a seller refurbished item and does not have a boot recovery disk.
View 8 Replies View RelatedMy mates Maxtor 60GB HDD is showing an Error Code of:"0200 Failure Fixed Disk 0" press F1 to Resume press F2 to enter setup.
View 2 Replies View Relatedim usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
View 6 Replies View Relatedwindows 7 disk boot failure insert system disk and press enter
View 1 Replies View RelatedI woke up this morning, and I found that my computer was displaying this message"Disk boot failure, insert system disk and press enter". There are a ton of needed documents on the computer, and I'm hoping that they can be saved some way.
View 5 Replies View RelatedI've been having this error even after reformatting and reinstalling Windows 7 on my desktop. I've done reformatting / reinstalling Windows 7 several times, yet the problem still occurs. I'm thinking of my HDD as being corrupted or messed up. The problem occurred after I accidentally hit the CPU when I was stretching my foot. The screen froze after that. Upon rebooting it, 'Disk boot failure, Insert system disk and press enter' occurs. After I entered the DVD installer of Windows 7, the screen just hangs.
View 9 Replies View RelatedI have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.
However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine.
I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?
My friend bought a new PC and needed to put am OS on it. He put in the W7 disk and the error message 'disk boot failure insert system disk and press enter' appeared before installation was shown. He has tried changing around BIOS and it also recognises the hard drive and DVD/ CD ROM drive. Here is the specification he was given:Case : CIT Reaper Black Mesh fronted Tower CaseMotherboard : Gigabyte 78LMT Motherboard TechnologyCPU : AMD Bulldozer FX 4170 4.2ghz 8mb CacheHard Drive : 1tb Sata Hard DriveMemory : 8gb DDR3 1600mhz MemoryOptical Drive : 24x Dual Layer Sata DVD WriterGraphics Card : Nvidia Geforce GTX 650 2gb GDDR5 With HDMIPower Supply : 750 Watt Branded Power Supply Also, he has tried booting BIOS in different order
View 3 Replies View RelatedI can't boot to Windows 7. It says that Windows could not verify something about this object. Windowssystem32winboot.exe
Anyone got anyway to fix it so I can boot to windows 7?
PS: I used Vista Boot Pro, and for the boot loader option, I clicked Install Longhorn Bootloader. Could this be the problem?
When I try to turn on my comp. I get a message saying boot disc failureinsert system disc and press enter.If I switch off and try again it usually works o.k.occassionally I have to try several times. What is wrong, and how do I fix it. Also, is it on the brink of complete failure?
View 9 Replies View RelatedI have window 7 64 bits works on hp pavilion dv3 laptop The problem is that every time I push F2 or F4 or F4 or F6 .....F8 F10 .......etc I see the "window boot manager " screen it does not work like before whereas every single key takes you to a specific screen How to get rid of this problem ?
View 9 Replies View Relatedbut I only have windows 7 64. Never had Vista on the machine. Just did a clean reinstall of windows 7 from my legal FULL disk. It has activated correctly.If I choose vista it still boots to win 7..
View 1 Replies View Related