Floppy Diskette Seek Failure On Dell 9100?
Jun 11, 2012how to fix floppy diskette seek failure on a dell 9100 press f1 to continue?
View 3 Replieshow to fix floppy diskette seek failure on a dell 9100 press f1 to continue?
View 3 RepliesI recently bought a new power pack for my Dell Dimension 5100 and after installing I got a message saying floppy diskette seek failure. I googled it and as suggested disabled it in the bios and SORTED.However yesterday i was installing a new wireless dongle and it crashed and I had to shut down. I have since got a variety of messages relating to files includinf "NTFS" and "PCI" so I want to do a repair of the Windows XP Home OS. However I cant install the CD because the drive isnt working. I had a look inside (because I am pretty sure the drive worked fine before the new PSU) and I am sure that all the wires are in right. When the computer is on the CD drive opens up and closes but is not actually recognised. Also, I have tried several other working CD drives but to no avail (presumably because they have to be installed right?).
View 7 Replies View RelatedI just did a clean install of Windows 7 When i boot the system up, i now get this message "Diskette Drive 0 Seek Failure F1 to continue" Under my Computer it now lists that i have Two Floppy drives, A and B I only have one drive, an external USB drive, made by Memorex The drive A somehow Windows thinks i have, but there is none. The drive B is reading as my floppy drive (which i want to change to drive A) Floppy drives are not showing up under the Disk Management, in order to try and change the drive letter paths. I have a Dell Insprion 530s, Windows 7 Home Premium.
View 4 Replies View RelatedHow do i reinstall a floppy diskette on windows 7?
View 2 Replies View RelatedI've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
View 7 Replies View RelatedI've got a Dell desktop that will not boot, gives the message Drive 0 Seek Failure.I was able to boot to a linux disk and copy files, so the drive is spinning. I ran the built in Dell hard drive diagnostics, the hard drive passed. I also ran the Hitachi Drive Fitness test, and it passed.I assume maybe it just needs some repair to the boot sector?
View 9 Replies View RelatedI would like to know how and if the boot mgr is replaceable
View 1 Replies View RelatedDo you have a floppy controller card for a PCI1-2 card slot available on my Mother board Missing FDI connector ECS-A740GM-M?
View 2 Replies View RelatedI installed a power supply and removed the floppy disk from a Dell Optiplex GX520. Now when I turn it on, it says there is no serial ATA SATA-2 nor parallel ATA, Path=0 (Pri Master.) Everything is working so I don't know what the problem is.
View 2 Replies View RelatedXps 9100 power button flashing yellow
View 1 Replies View RelatedJust bought this laptop (Dell Inspiron N5110) few months ago, since yest. after rebooting the laptop, am NO longer can access second partition (D), Windows management tool says -> RAW mode. plus, he become so slow, it takes him like 20 min. to load desktop. Partition C is still reachable, browse, open soft. etc.Dell diagnostic boot tool, found an error on HD "error code 2000-0142".I prefer not to format the hard disk, I have important project stuff related to my work on the second partition. and yes, am a real jackass I didnt make any BACKUP of the data, so am quite lost here..
View 4 Replies View Relateddell inspiron 570 desktop 2gb ram win 7 avast malwarebytes. best buy demo model bought last october. started having problems a few months ago when downloading Internet videos. it would shut off with no warning. event log showed kernel 41 power issue but no other info. it seemed to happen after every windows update. system restore or booting to last known good configuration helped for a while. now the computer will only stay on for 5 min before it dies. sys restore stopped working. it's unable to extract a copy of the directory so i'm thinking it may be a win 7 reinstall situation. unfortunately i don't remember my admin password so i couldn't access the repair options.
View 4 Replies View RelatedIs there any reason Win 7 won't boot from a floppy? I made a startup floppy from Win 7 but it won't boot. It also won't boot from an XP floppy.
View 14 Replies View RelatedI've got a floppy drive A: installed on my computer, but of-course, i don't have no floppy drive, how do i get rid of this problem (im using windows 7 RC).
Answer:-
Go into your BIOS and set it to disable the floppy controller. The BIOS will tell Windows (any version of Windows) that a floppy drive is present, even if none is hooked up, if the floppy controller is enabled.
Need a floppy to usb connector.
View 5 Replies View RelatedWhen booting upduring POST, I get a "floppy drive fail (40)" error code. I have to use F1 to get to the desk top. I do not have a floppy drive! I have replaced the cmos battery on the mother board. When I access floppy drive in the removable device priority menu, click,nothing! I get no sub-menu to disable it.
View 1 Replies View RelatedI'm trying to run a game from a floppy disk that I used on Windows 95 on Windows 7. But I get an error message saying its not compatible with my version of windows. Any ideas on how I can make it work?
Answer:-
Set up a virtual machine of Windows 98 (preferably 98 SE) using something like VirtualBox (ensure you have a copy of Windows 98 handy as well...). Install and play from there.
I can't get the driver except a floppy format. I'm running a ASUS Rampage III GENE MotherBoard w/ windows7 and 5 1 TerraByte sata3 Harddrives.
View 1 Replies View RelatedIhave an external floppy disc drive complete with usb port, I operate windows 7, I do not have experience in downloading music
View 1 Replies View RelatedI require a 3.5 inch floppy drive on my computer. However, whenever I select it in explorer, it starts to read the disk, then says it's not formatted, or puts up a please insert disk notice.
View 1 Replies View RelatedMy Asus motherboard does not recongnise my keyboard until the Windows OS loads.Now I have no OS and need to install new OS.Since keyboard works only after Windows boots I cannot access Bios to change boot options to CD, Floopy or USB.
View 3 Replies View RelatedIf your not going to use a Floppy Drive in your Computer you can disable it and ger rid of the Floppy Drive icon that sits in my computer.
Right click on my computer and select properties. In the hardware tab select 'Device Manager'. In the device manager there should be an expandable menu labelled 'Floppy disk controllers', expand this and you should see something like 'Standard floppy disk controller' right click on this and click disable. If at some time you do need to use a Floppy Drive you can re-able it.
I have a WDC USB floppy drive. One day day ago when i connected my floppy to PC it worked. When i connected it to other computer it not worked and then when i connected it to my PC again it's not working. When i connect floppy it says nothing. I tried to update disk drivers with Computer Management and it says that my drivers are up to date. I tried to uninstall drivers and than install it again and that's not working. BIOS and Computer Management can see the floppy drive, but Win Explorer can't see floppy. What should i do to access my floppy and my files?
View 1 Replies View RelatedFor some reason my USB floppy drive is not found or recognized in Win 7 64 bit, it was working but not anymore. Can't find it in Computer Management-Disk Management but it is listed in Devices and shows no conflicts.
View 9 Replies View RelatedI have purchased and installed Win7 on a New (2 months old) PC that has a New floppy drive. The first time I used the drive I inserted a disk and opened it up to see what was on it. Explorer showed files and allowed me to open one for viewing. I then deleted all files from the disk and attempted to copy other files to the disk at which time I got a device not readable/disk not formatted. I attempted to format the disk numerous times with no luck. I used another PC (WinXP) to check/format the disk and again put the disk into the Win7 PC and opened it - showed disk empty (Good). I then copied some files to the disk, they did copy this time, then closed all windows and reopened explorer to the F. Drv again at which time I could See and Open the files. HERE'S WHERE THINGS GET FUNKY. I close explorer window, remove the disk and reinstalled the disk, open explorer to F. Drv and now the disk is EMPTY. When I try to again copy files to the disk I get the disk not formatted - but it will not format the disk and keeps giving a bad media message (I've tried 15 disks). I figured it was the drive (HW) even though it's new so I obtained another New drive and it did the same thing. I changed cables 3 times (one cable is new) - NO CHANGE. I tried an old but good drive - NO CHANGE.
Each time I try to read a floppy disk and then try to read the same disk on my WinXP PC I'm told the disk is not formatted/corrupted file system. The disk(s) are good and work as advertised in the XP machine but not with Win7. Kicker - my USB floppy drive works very well with Win7 and no issues.
Has anyone else had trouble using a USB floppy drive in Windows 7? The drive does not appear in My Computer, I have tried troubleshooting the device, uninstalling it and re-installing it and trying to install other drivers to resolve the issue (windows will not accept others as it already has the best driver apparently...). I'm at a loss now I have even tried using drivermax to correct the problem but even that does not recognise the device.To ensure it wasn't an issue with the Floppy drive itself I have even tried using another, with the same result.
View 9 Replies View RelatedI've got Silent Service 2 on 2x floppy disks. The problem I have is when I load the disks into the drive, it tells me nothing is there and to format the disks??I've tried to find a way round this, but keep getting sent to DOS Box. Is there anyway to get the game onto the Hard Drive and run the game without DOS Box??
View 3 Replies View Relatedfor some unknown reason my Floppy drive runs very, very slow on 64bit Windows 7. Takes about a minute to open an office XL file, and longer to close it... a lot longer. Even after the file is closed, the floppy light is still on an clicking, like it's reading the disc still. The drive itself is OK. I've got XP Pro on the same PC and the floppy is like lightning on XP. Also tried updating drivers, but it says it's got the best drivers available, and that it's working OK. So what the heck is it?
View 7 Replies View RelatedI have an old program I bought on floppys and I It won't let me copy the disc.. and I don't have a way to get it into Windows 7 on my new notebook. Is there a way I can beat the copy protection on the disc or hook it up to my new Dell6520? I have the program installed on xp in my old dell. I have the floppy drive but it won't fit the new dell.
View 1 Replies View RelatedMy Floppy Drive has the drive letter assignment (A). I would rather have it be (F). The traditional way to change drive letters is under disk management on right-click of My Computer. However, Floppy drives are not visible in the list. How can I change the letter?
View 1 Replies View Relatedwere can i get drivers for my floppy drive for windows 7
View 1 Replies View Related