"Diskette Drive 0 Seek Failure F1 To Continue"
Sep 4, 2011
I just did a clean install of Windows 7 When i boot the system up, i now get this message "Diskette Drive 0 Seek Failure F1 to continue" Under my Computer it now lists that i have Two Floppy drives, A and B I only have one drive, an external USB drive, made by Memorex The drive A somehow Windows thinks i have, but there is none. The drive B is reading as my floppy drive (which i want to change to drive A) Floppy drives are not showing up under the Disk Management, in order to try and change the drive letter paths. I have a Dell Insprion 530s, Windows 7 Home Premium.
View 4 Replies
ADVERTISEMENT
Mar 8, 2012
I recently bought a new power pack for my Dell Dimension 5100 and after installing I got a message saying floppy diskette seek failure. I googled it and as suggested disabled it in the bios and SORTED.However yesterday i was installing a new wireless dongle and it crashed and I had to shut down. I have since got a variety of messages relating to files includinf "NTFS" and "PCI" so I want to do a repair of the Windows XP Home OS. However I cant install the CD because the drive isnt working. I had a look inside (because I am pretty sure the drive worked fine before the new PSU) and I am sure that all the wires are in right. When the computer is on the CD drive opens up and closes but is not actually recognised. Also, I have tried several other working CD drives but to no avail (presumably because they have to be installed right?).
View 7 Replies
View Related
Jun 11, 2012
how to fix floppy diskette seek failure on a dell 9100 press f1 to continue?
View 3 Replies
View Related
Apr 30, 2012
I've got a Dell desktop that will not boot, gives the message Drive 0 Seek Failure.I was able to boot to a linux disk and copy files, so the drive is spinning. I ran the built in Dell hard drive diagnostics, the hard drive passed. I also ran the Hitachi Drive Fitness test, and it passed.I assume maybe it just needs some repair to the boot sector?
View 9 Replies
View Related
Dec 13, 2011
I've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
View 7 Replies
View Related
Feb 27, 2012
How do i reinstall a floppy diskette on windows 7?
View 2 Replies
View Related
Feb 21, 2011
I had assisting my cousin get his laptop running. He actually went and got a WD backup drive. He has been running good. Has a tendency to overdue the AV scans, Malware Scans and CCleaner Scans. Anyway, he booted yesterday and a timed to start on "Boot Normally" with safe mode and safe mode with network etc: screen came up. He advised he got logged on and ran everything for anything with no luck. Every time he reboots ( 2-3 times ) it came up as described. I had him do a chkdsk. When it finished it booted normally and has several times since. Since this is the condition the computer was in prior to me helping him a month ago, I thought as a minor leaguer, that I'd inquire with the forum members. Is it possible his toshiba laptop which originally ran Vista, he got it dumped for Windows 7 Home Premium, has the 160 GB Hard drive beginning to croak.
View 2 Replies
View Related
Oct 3, 2012
A few months ago I made the mistake of buying a used hard drive off Ebay. Last night it died on me and at the moment its in the freezer because Ive heard that freezing the drive can get it up and running long enough to get data recovered.
View 9 Replies
View Related
Mar 8, 2009
I was wondering if you could provide me with some feedback on a hard drive issue that started when I booted up my pc yesterday. Hard Drive is WD 160GB SATA.
I received this error at boot up:
Read Disk Error CTRL+ALT+DEL to restart
I restarted and luckily I was able to get to the desktop (took longer then normal tho).
Checked Event Viewer.. nothing showed. Checked Performance Logs... no errors showed.
Decided to double check all the connections... all plugged in nice and secure. Rebooted. Got the Read Disk Error again. this time it took me 3x to get to desktop. I decided to try another SATA connection on motherboard. REbooted.... got error again.
I ran a chkdsk/r and when system rebooted the Read Disk error showed up again.
After another 3 ctrl+alt+del reboots... I was able to get into Windows. I downloaded the Diagnostic Tools from WD and my drive failed both the Quick and Extended Tests. Not surprising lol
Anyhoo, here is a screenshot of my WD Diagnostic test results. I was wondering if it was a HDD issue or a motherboard issue? Any thoughts? I would rather replace a HDD then a motherboard. This WD 160 SATA drive is less then a month old also. BIOS sees the hard drive.also tried setting BIOS back to default.... sometimes that works but not this time.
View 9 Replies
View Related
Nov 23, 2011
It occured when i tried to open internet explorer while google chrome was downloading a file. However, I have always been able to do this when I attempted it previously, so I am not sure what made this time different, but after i clicked on internet explorer, everything i had open got immediately closed, my screen flashed black, and when it was back at my desktop, all my icons were gone aside from Recycling bin, Microsoft Word, and Powerpoint, and like 50 little message windows opened one after the other saying that files may have been lost because of damage done to the C drive. I cannot preform a system restore because it says there are no previous restore points, and all of my files (documents, pictures, downloads, music, programs) are no longer on my computer for some reason? Is this just a problem with my C drive that can be fixed and restored? Or are all of my files gone for good? Also, my PCtools Spy Doctor ran a scan and said: Adware.BHO.GEN (20 Infections) - High Threat.
View 11 Replies
View Related
Mar 3, 2012
My system is a Hewlett Packard CQ 1040UK
AMD E350 1.60 GHZ
3.00 RAM
64 bit OS.
It is six weeks from new. When I load a dvd rom into the drive bay at the front of the computer the dvd is taken into the machine. When I try to play the disc I get the message 'insert disc'.Watching DVDs worked perfectly until a few days ago.
View 3 Replies
View Related
Sep 1, 2012
I recently installed some Windows updates on my new computer, and after the first boot with the updates my computer froze and I got a BSOD saying "Drive Power State Failure"
View 1 Replies
View Related
Mar 21, 2011
Can't access any files. Need it urgently as it has all my uni stuff and need it to submit before deadline.
View 9 Replies
View Related
Dec 9, 2011
My Xp machine won't boot. So I moved the HD into my Windows 7 machine. The drive shows up in WExplorer but it won't show directories or files.
View 3 Replies
View Related
Sep 4, 2009
I have just bought a brand new hard drive due to my last ones controller failed.
Western Digital Caviar Black 500gb
So the problem,
Did a fresh install of win 7 (Build 7229) two nights ago, all installed perfectly, next day (yesterday) went to boot up pc and had the dos error message - Disk boot failure, please insert system disk and press enter.
My first impression was it may have been an install failure, so i formatted the hard drive and reinstalled. shutdown the PC and rebooted up and i had the same error message, now after this, i got my failed hard drive out and after a lot of faffing around, BIOS found it and it gave me the same error message.
Can anyone tell me what the problem might be. I have tried Windows startup repair, did not fix.
BIOS settings are
First boot device is Hard drive
second boot device is CD-ROM
(I have even swapped these around to boot from windows 7 and it just starts the setup procedure of installing windows drivers) I have even set boot order of HDDs so my main windows HDD is up top. Anyone got any clues.
View 9 Replies
View Related
Jan 27, 2013
Just re-installed Windows 7 after a hard drive failure. Windows 7 x64 Home premium . 2.4 Ghz Processor 4GB RAM . Cannot Install SP1.
View 2 Replies
View Related
Jan 21, 2011
i had a virus and used norton to clean out and laptop went to blue screen and then started norton recovery, since then i cannot access the hard drive in the laptop or via a caddy. just says unable to load driver..
View 16 Replies
View Related
Jun 18, 2012
I just turned on my laptop on and it wouldnt go past the "starting windows" logo. So I restarted my computer and it gave me an option to repair start up option and once the repair finished it said it has failed to solve the issue and it pop up a Windows System Recovery which is always good if I wanted to restore it to the factory state unfortunately I have about 30 GB more or less data on this laptop that is basically my life and wanted to retrieve the data.
It also gave me an option for command prompt so i went and run "chkdsk" it got to 49% and from there it kept on listing the entries on the disk and numbers that its got errors on, I didn't quiet finished the disk check and turned my laptop off. Reason being it was 4 AM in the morning. I have been using my laptop for over 2-3 years and by use I mean it has been online almost 80% of the time more or less.
Is it hard drive failure? If so is there a way I could retrieve any data from it? I know there are software that you can boot from CD or USB to salvage what ever data is left or readable, however the data is somewhat precious to me and dont want to do further damage. I would have gone to an professional and gave it to them but I can't afford it. I'm going to change the hard drive into a different laptop to check if its truely an hard drive problem related.
View 14 Replies
View Related
Oct 6, 2011
I was normally using my computer, when I suddenly noticed one of my hard drives disappeared from My Computer. Checked the Device Manager, I get the following. Trying to initialize it throws up this error: Seems to spin just fine. Trying different USB ports failed, switching cables as well. Already tried a few programs. GetDataBack for NTFS throws up error 1117. R-Studio also fails, as does DMDE and MTY. My friend even borrowed me Microsoft DaRT (part of MDOP), but when I boot into it, it doesn't recognize the HDD at all, no matter how hard I try. Only my Windows 7 installation does.Anything I can do in this situation? I had a lot of important data on it, and it's not completely dead yet. Maybe I can still save it somehow, without haivng to pay one of those data recovery thieves...
View 9 Replies
View Related
Jun 16, 2012
I have raid 5 setup, on a ASUS P5K WS motherboard using matrix storage manager. Just copied everything on to it, now a hard drive has failed. I got new hard drive but its seen as none Raid and raid showing as failure ?
View 3 Replies
View Related
Mar 18, 2012
I have a HP Pavilion dv6 laptop and getting alerts saying the hard drive is failing. I've pushed all my data up to NAS storage and will install a new hard disk but... How can I get a replacement of Windows 7 Home Premium. With the drive failing, Windows is becoming unstable and I need to do a fresh install on the new drive once it's installed.
View 9 Replies
View Related
Jul 31, 2012
After trying to scan my computer with tdskiller (I believe its called) to remove some viruses, I was asked to reboot. When I did, my backround desktop picture turned black, files seemed to be missing from my desktop and a window poped up scanning and telling me how many errors I had. Shortly after I got about 20 error pop up messages. I rebooted my computer and more files were missing to the point all I had was recycle bin, and two other programs.
Now the computer runs only in safe mode, No matter what I do (pressing f8 - start in normal mode) nothing works. I cant get internet access, and worst of all, I cant even system restore or even recover it back to to the malfunctioners option due to errors. I am stuck and do not know what else to try.
Ive tried the repair option in dos aswell and it just keeps me in the "Loading window files" screen, as I left it there for nearly four hours im guessing that was not going to work.
View 7 Replies
View Related
Aug 28, 2012
My system is Dell Inspiron 17R SE (7720), 1 TB Hard Disk 5400 rpm + 32 GB mSATA, 8 GB RAM, 3rd Gen i7. I was trying to make a bootable USB flash drive for windows 7 from Windows 7 Home Premium Reinstall disk that came with my Dell laptop, using the WinToFlash utility. But in starting the process, the PC froze, all applications (even explorer.exe) stopped, and Alt+Ctrl+Del refused to work. I turned the laptop off and back on, where it refused to even show the OS list and showed a DRMK message instead with a command prompt C:> as:
Loading DRMK V8.00...
DRMK Version 8.00
COMMAND.COM Build 37 - Jul 28, 2008
DRMK KERNEL Build 15 - Aug 8, 2008
Copyright (c) 2006-2008 Dell Inc. All rights reserved.
C:>
I tried booting from Windows 7 reinstall DVD but none of the repair options worked. I tried reinstall and repair options but my Hard Drive did not show up. It rather asked to Load Drivers for the Hard Disk. However, it did show any of the USB drives I connected to it, along with an X: drive, which must be the recovery drive for Dell's factory restore. I tried looking for Hard Disk drivers in that but no luck.
Then I downloaded from another PC a USB utility for Seagate Hard Drives from Dell website that makes a bootable USB. I ran that utility and it showed all the test passed (But there was no firmware update during the tests). Another thing I tried was using list disk command on command prompt in Windows Repair, but It did not show any drives, not even the X: drive. It only showed the USB drives I attached to it, or the DVD drive in list volume command.
I cannot boot to windows, I cannot install new windows, I cannot repair the windows and I cannot even factory restore my laptop. The hard drive shows up in BIOS, but not in Windows Boot or Windows Installation. Is there any way I can get my Hard Disk back without losing data? I have two partitions of that drive. I don't care about formatting C: Drive (Windows) but I wanna preserve E: Drive (the one filled with personal data but no programs).
View 2 Replies
View Related
Nov 21, 2011
After getting rid of windows 7 hard drive failure virus my start menu programs are empty.
View 2 Replies
View Related
Dec 25, 2011
i have a gateway lt2030u and i have been trying to install windows 7 but when i need to choose a partition , it doesn't show any , it says it cant find driver that i need to load a driver and i insert my cd and it didn't see any , i search gateway's website and used sata driver but still didn't work
View 1 Replies
View Related
May 31, 2012
the key of this new post is;I AM SCARED that the scenario i had before (all JPGS pictures vanished, and nobody was able to find what was the cause) could be repeated again.why i am saying that?in this system (new HDD with fresh windows 7 install) have few pictures, while scanning (superantispyware)the the old disk (the one were all the pictures were delete by an unknown reason) i notice one picture was missing, but i found instead a file named; "EL 71B9.tmp", by certain reason i decide to copy the file and to change it's extension to jpg, and voila, my picture was there.
View 2 Replies
View Related
Sep 3, 2012
During my usual morning start-up, I got a dos screen with a message and to press F1 to continue. Everything booted fine after that. I ran malwarebytes, backed up my data files on a flash drive and looked into the event logs to see what might have happened.Unfortunately, I didn't even know where to look in the event logs except the administrative events which showed nothing critical.
View 1 Replies
View Related
May 21, 2011
I just bought a HP Pavilion laptop which is running 64bit Windows 7. My old printer is Compaq IJ600 and ran on XP fine.No drivers have been made since for Vista or 7, and I am not able to figure out if I can find either an updated driver someone has created perhaps, or how to run the old drivers in 64bit.Or to get it to run in compatability mode successfully as XP or Vista. Is there any way to continue using my Compaq printer without buying a new one?
View 2 Replies
View Related
Oct 30, 2011
How do you continue to download on a part file? Sometimes I download a file, then it gets say halfway, and my connection fails or something . Now when I go back online to finish downloading the file, it starts downloading it from scratch-How can I continue downloading on the original part file that got halfway or whatever?
View 4 Replies
View Related
Mar 6, 2011
I was running the Windows 7 home premium 32bit upgrade on a Toshiba laptop that was running Vista Home Premium 32bit. The upgrade process rebooted at somepoint and now it keeps rebooting to a DOS window with a command prompt on drive X. If I try to run the install.exe off drive D (CD-ROM) it starts the process and then stops saying the installation booted of the Windows 7 installation CD please remove the CD and restart. I cannot get past this endless loop. Nothing will boot completely.
View 2 Replies
View Related
Nov 9, 2011
Why does the cursor sometimes continue moving across the screen when my mouse is remains still?
View 3 Replies
View Related
