the key of this new post is;I AM SCARED that the scenario i had before (all JPGS pictures vanished, and nobody was able to find what was the cause) could be repeated again.why i am saying that?in this system (new HDD with fresh windows 7 install) have few pictures, while scanning (superantispyware)the the old disk (the one were all the pictures were delete by an unknown reason) i notice one picture was missing, but i found instead a file named; "EL 71B9.tmp", by certain reason i decide to copy the file and to change it's extension to jpg, and voila, my picture was there.
I've bought this Sragate 500GB (Recognized as 465GB) HDD and moved everyhing into it. Partitioned it during 7 installation and here are my partitions all in NTFS:
Primary (101MB) - NTFS - Created during Windows 7 setup - I'll delete when I'm ready to install a new OS
I installed my Windows 7 and winxp in the 2nd and 3rd primary and I switch between these two by activaving the appropriate one. when I'm in XP and activate 75GB primart to boot in Windows 7 something strange happens:
Except the 1st logical drive, any other logical drive I have after it dissapears and turns into unpartitioned space. and it seems to be a bug of windows disk management tool or limitation in winxp. the point is that there's no such a problem when I do the same in Windows 7 exactly.
I imported my photos from my SDCard to my PC using Picasa 3, and everything was going smoothly... until I tried to take a look at the photos! all of the photos that I've imported using this method for some reason all became greyed out! Viewing them on Picasa3, all you can see is a grey rectangle, in place of the photos. However, when using the windows explorer folder, i can see that the photos were imported correctly (it's not just a grey box, but the actual photos), but when I try to open it (using any program: Paint, Picasa3, etc), it is still a grey rectangle instead of the photos. I tried to upload the image and send it via email, and I get the same result.In my mistake, I chose to "delete the uploaded photos after uploading" option..it's my vacation photos from Croatia I'm not sure if there were any errors when I imported it... i stepped out for a bit while I was waiting for it to import. I looked around my SD card, and looked at the "Lost.dir" folder, and copied all of what's in there.I did use Glarysoft to recover the images, and I'm using a Windows 7 laptop as my computer. Also, are there other alternatives? I did save the lost.dir with all of the photo files in it, both in my SD Card, and on my laptop.
i have a gateway lt2030u and i have been trying to install windows 7 but when i need to choose a partition , it doesn't show any , it says it cant find driver that i need to load a driver and i insert my cd and it didn't see any , i search gateway's website and used sata driver but still didn't work
During my usual morning start-up, I got a dos screen with a message and to press F1 to continue. Everything booted fine after that. I ran malwarebytes, backed up my data files on a flash drive and looked into the event logs to see what might have happened.Unfortunately, I didn't even know where to look in the event logs except the administrative events which showed nothing critical.
I just bought a HP Pavilion laptop which is running 64bit Windows 7. My old printer is Compaq IJ600 and ran on XP fine.No drivers have been made since for Vista or 7, and I am not able to figure out if I can find either an updated driver someone has created perhaps, or how to run the old drivers in 64bit.Or to get it to run in compatability mode successfully as XP or Vista. Is there any way to continue using my Compaq printer without buying a new one?
How do you continue to download on a part file? Sometimes I download a file, then it gets say halfway, and my connection fails or something . Now when I go back online to finish downloading the file, it starts downloading it from scratch-How can I continue downloading on the original part file that got halfway or whatever?
I was running the Windows 7 home premium 32bit upgrade on a Toshiba laptop that was running Vista Home Premium 32bit. The upgrade process rebooted at somepoint and now it keeps rebooting to a DOS window with a command prompt on drive X. If I try to run the install.exe off drive D (CD-ROM) it starts the process and then stops saying the installation booted of the Windows 7 installation CD please remove the CD and restart. I cannot get past this endless loop. Nothing will boot completely.
Sometimes I cannot type at all. I start typing it will type the 1st letter & maybe the 2nd and then stop I have to move the space bar forward type the next letter (sometimes it works & sometimes it doesn't). I then have to backspace it to finish the word this happens predominantly on the web when typing into a message board.
I was busy downloading some software using the standard Firefox downloader when my connection was dropped 3MB shy of finishing. I don't want to go through the whole process again but when I press the retry button thats exactly what it does. Is there no way to get it to continue where it left off?
when I hit 'reboot', my computer shuts down fine but when it is supposed to reboot, my monitor light stays orange (whereas it's blue when it's in use) and the computer just never... boots I guess. The screen stays black. If I press the reboot button on my tower, then I can boot into windows.
I've checked the event viewer and nothing came up except something about a missing driver (The AODDriver4.2 service failed to start due to the following error: The system cannot find the file specified.).
This has been going on since I performed a system restore a month ago because an update of Malwarebytes (to the latest version) literally killed my internet (ISP came out and for three weeks worked on it - giving me a new, direct line I don't share with anyone in my apartment, giving me a new ethernet cable, trying a new network card etc) and finally I was told to uninstall all AV/anti-malware programs one by one (since I've MS Security Essentials and MWB), and after MWB was uninstalled, bam, my internet was fine.).
Not sure what's going on, and I don't really know what information to provide for this since there isn't an error, my Windows just isn't booting.
MWB said nothing was detected (full scan), same for my AV, so what could this be?
ETA; From the Event Viewer, listed as Warning, at the time I rebooted: Quote: The Transaction (UOW={c055ddca-29fe-11e2-b7f3-00261840ca2c}, Description='') was unable to be committed, and instead rolled back; this was due to an error message returned by CLFS while attempting to write a Prepare or Commit record for the Transaction. The CLFS error returned was: 0xc0190052.
My Dell M11x laptop battery had very little life left and would only run for about 20 minutes when unplugged from the adaptor. I purchased a new M11x battery, but seeing as I usually use my laptop plugged into the adaptor, should I save this new battery for periods when I know I won't be able to be plugged in?
I have a 32bit XP installed in C: and I want to install 64bit Win 7 on D:. I have used the usb download tool to make a bootable usb drive and installed Windows 7 till the 1st reboot. However after the reboot, it just returns to page 1 of the installation (select language, drive to install into etc). If I change the boot priority to HDD first, then it just boots into XP as if nothing has ever happened.I have tried searching for the answer for more than 5 hours now and all the fixes dont seem to work. It is as though my computer cant detect that Win 7 is installed halfway.PC Specs: E6750 C2D , Gigabyte G41-MTS2PT, 4GB ram, Sapphire 5750 512mb. 2x 160gb hdd.
i am trying to upgrade my computer from vista 32 bit to windows 7 ultimate i did a windows advisor got everything installed but it keeps showing my cd rom driver as being outdated i have done the upgrade that windows 7 called for (cyberlink 8.2)oh i am on a dell inspiron 530s with 3gig mem and 140gig hd i have copied windows 7 to a flash drive (8gb) when i run setup form usb drive setup comes back saying: (windows could not retrieve information the disks on this computer) then it stops..... i am wondering if my recovery disk has something to do with this........????? when my computer starts there are 2 copies of vista 1 is corrupt which is called (recovery) the other one takes me to vista..... i would really like to do this if possible.....also usb drive is bootable.... but i think my computer does not support it start windows 7.
I'm trying to install Windows 7 but am having problems half way through the setup.
Half way through the install I get the following message "Setup can't continue. Restart the computer and restart Setup. When prompted, try getting the latest updates."
I'm trying to install on a HP Pavilion Entertainment PC (DV6733tx) with Vista service pack 1 installed and 4GB of memory. From the compatibility tests that I have run there shouldn't be any problems.
My partner has also installed from the same disk and it installed properly so we know it's not the disk.
Has anyone else experienced this? Any suggestions? I've tried on three separate occasions now and while each time it's progressed a little further, I still end up with the above error message.
I am running Windows 7 64bit. I have 15 updates that continue to fail. YES, I KNOW THE IMAGE SHOWS "1" - that's because I wanted to see if could actually perform one SMALL update. They're just a bunch of Security Updates for MS Office programs. DO NOT tell me to download these updates manually. THAT IS NOT A SOLUTION to a problem that will continue on forever. I clicked "Get help with this error" which brought me to the window's help as seen in the second half of the image. These errors have NOTHING to do with the problem I am having.
YES, I have disabled my antivirus program already and they still fail.
YES, I am logged in as the administrator and I have all the necessary privileges.
YES, I have used Windows' crappy troubleshooter.
YES, I used Window's crappy automatic "fixer" or whatever that junk is called.
About a week ago my computer was running EXTREMELY slowly and opening just about any program that was part of office was EXTREMELY laggy. I ran disk defrag, disk clean up, and I went through a bunch of services and start up programs that I didn't need and disabled them. This increased my computer's performance and MS Office no longer lags.
I am running Windows 7 64bit. I have 15 updates that continue to fail. YES, I KNOW THE IMAGE SHOWS "1" - that's because I wanted to see if could actually perform one SMALL update. They're just a bunch of Security Updates for MS Office programs. DO NOT tell me to download these updates manually. THAT IS NOT A SOLUTION to a problem that will continue on forever.
I clicked "Get help with this error" which brought me to the window's help as seen in the second half of the image. These errors have NOTHING to do with the problem I am having. I have searched google and NO solution helps me.
YES, I have disabled my antivirus program already and they still fail. YES, I am logged in as the administrator and I have all the necessary privileges. YES, I have used Windows' crappy troubleshooter. YES, I used Window's crappy automatic "fixer" or whatever that junk is called.
About a week ago my computer was running EXTREMELY slowly and opening just about any program that was part of office was EXTREMELY laggy. I ran disk defrag, disk clean up, and I went through a bunch of services and start up programs that I didn't need and disabled them. This increased my computer's performance and MS Office no longer lags.
Errors found. CHKDSK cannot continue in read-only mode. I ran hard disk check... the result is given below........Errors found. CHKDSK cannot continue in read-only mode.
Windows XP English (United States) C: Volume Label: JAYDEEP, File System: NTFS Volume label is JAYDEEP. Advanced SystemCare is verifying files (stage 1 of 3)... 144896 file records processed. File verification completed.
This problem is happening on two different laptops, both Windows 7, so I'm wondering if it's a virus. On many occasions, but not every time, my cursor will jump to another spot in the text and continue typing in the middle of another word. It seems to happen when a word ends in "t".
I have had the 5600 for about 2 years and still have not been able to use it without problems. I need to scan documents and keep getting the error message Microsoft.NET Framework 2.0 is required to continue.
I am trying to scan a document on the Lexmark 5600 and keep getting an error message Microsoft.NET Framework 2.0 required to continue. I have tried to download but after several unsuccessful attempts have given up.
About 3 weeks ago I deleted two .avi files from the video folder on my PC, and for a few days afterwards they continued to reappear there. They still turn up occasionally in Explorer Resources, but when I try to delete them again, I am told that they cannot be found, so they actually have been deleted. Is there any way to get rid of these entries completely? I cannot use standard removal tools since I cannot eliminate a file that 'no longer exists' (!) on the computer.
I have Vista Home Premium 64 bit and I'm trying to upgrade to 7. I bought the college copy so I only have the download, no DVD.
When I get to like 10% of installation I get error 0x80070241, and it says that a file is corrupted or missing and installation cannot continue.
I know everyone hates n00bs who ask questions that have already been answered, and I did google this first (and call Microsoft), but the results I found on google went right over my head and Microsoft was not helpful at all (I shot them off an e-mail thinking I might get better service that way, but they haven't responded yet.)
Anyway, what can I do? I really really want Vista off my computer but it like refuses to die lol.
I was trying to install the automatic win7 updates and in the 'important' update was ie9. I clicked on 'install updates' and windows started installing ie9. After a couple of seconds I got this window saying:: "Some files that need to be updated are currently being used by these programs. Please save your work, close the programs and then continue. If you can't close, setup can do it for you."
HP advisor HpqToaster Module Java UpdateScheduler Microsoft Security Client User Interface nokia launch application quick launch buttons windows desktop gadgets windows explorer"
That's the list of programs that need to be closed. Obvious, I cancelled. Why do I need to close almost everything for installing a browser?
I have a yellow triangle on my laptop that says I need to troubleshoot it. When I open the devices and printers and click on troubleshoot laptop I keep getting the error message 0x80070057. It says "An error occurred while troubleshooting:"An unexpected error has occurred. The trouble shooting wizard can't continue.
While creating Toshiba recovery media, it was interupted by support, on the 4th disc. Already created the 1st 3, and need to create the remaining 2. How do I begin on disc 4?
