Since a couple of weeks I have had this really annouing problem with Flashing horizontal stripes on my second monitor, i can guarantee that these are not hardware problems, the stripes do not appear when i open a program on full screen, so basically they ONLY appear on the desktop background.
Here is a link to a video of the stripes:
I have horizontal lines that scan my monitor whenever i play a game. I can see the horizontal lines only on darker colors like grey, dark-green etc. I have a Samsung E2220 display that runs at 1080p on 60hz on a vga cable (no hdmi/dvi support on it). I tried another vga cable, i tried another power cable but with the same result.I have all drivers updated (monitor and other hardware). My current PC specs are: AsRock N68-C S UCC, Phenom II x4, 4Gb DDR3, Radeon HD7770, 500gb HDD Sata3 and a power supply Sirtec 500W 80+.If I open Far Cry 3, for example, i get those horizontal lines. If i minimize the game i still get the horizontal lines if i have something dark on my display (a grey/dark-green/dark-blue website).Before the HD7770 i had a GTS 450 and had the same problems. Could it be the PSU, or the motherboard or what? I also tried a different display monitor (on the VGA) and had the same horizontal lines scaning my display monitor.
View 9 Replies View RelatedI have a Dell Monitor model # 1908fwpt and we have used it as an external for a few laptops now, and on the last two hook-ups it has constant, non-flickering white horizontal lines across the screen. The only resolution that doesn't is 1280x1024 for some reason. I have changed the cables, used both VGA and DVI, and run the self-diagnostics and updated all drivers. I have chased this issue up and down and not been able to come up with a way to fix it. The monitor is not old, it hasn't been used very much, and I really don't want to replace it...
Since its done it on a few different computers I tend to think its not a driver issue, or a cable issue... And the one resolution it works on is all stretched out and flat.
I recently got a new monitor (samsung sync master s27b350), and when I connect it to my laptop (alienware m11x r2) it works perfectly fine through either vga or hdmi. Until I close the laptop's lid. Then the image on the external monitor either flickers or goes completely black (I have settings to 'do nothing' on lid close). All my drivers appear as up to date and working, and with the lid open, there is no flickering. I have tried several different cables of each hdmi and vga all with the same results.This didn't happen for the first 3 days with the new monitor, but then the problems started shortly after.
View 4 Replies View RelatedWhen I first boot up my desktop computer or let is set for any length of time the monitor loads up but the screen keep flashing/blinking kinda like light in it.Usually after 2 minutes or so it stope so I can continue.
View 2 Replies View RelatedWhen I watch TV I see black stripes on the screen. Picture attached for illustration.
My TV card is Hauppauge WinTV PVR 150 MCE KIT.
There is a way to solve this problem?
i just installed Windows 7 x32 on an old pentuim 4 ht cpu with embedded graphics and 512 mb of ram and i get these brown stripes every time i open a window,i updated my drivers and the problem is still the
View 3 Replies View RelatedRecently I decided to finally reinstall my Windows 7, since it was ~2yrs old and getting slower each day. I used the official MSDN Windows 7 Professional ISO SP1 and did a clean install. Unfortunately, I've been having this problem which I can't solve no matter what. It seems to me that there's some graphics issues - When resizing any window, it takes some tome while it redraws it's contents, you can actually see it updating the contents.Also, there's some sort of flickering involved as well.Machine in question is: HP ProBook 4515s With AMD/ATi HD 4330, running Windows 7 32bit SP1.I have tried the following, without success:
- the default drivers on the HP website
- the drivers provided by windows update service
- latest mobile drivers from AMD
- modded drivers with Mobility Modder
- Aero On / Aero Off / Disabling every visual effect
- Updating BIOS
- Doing the same on x64 version of windows.
I have DirectX updated, and all other patches and drivers should be there as well.
I want to instal horizontal scrolling of mouse pad
View 1 Replies View RelatedFor the past day random lines have been appearing on my desktop. The following picture is not my laptop but I found this image and its the same thing that happens on my computer.The lines appear in different spots each time and will stay for a short amount of time.
[code]...
I've got a scan lines (horizontal) going up as if It's scanning a paper!?This only occurs when playing (all) games without VSYNC. Leaving VSYNC on solves the problem but I'm more used to play on higher framerate. Movements feel very slow when leaving it on (especially on FPS games). I've taken screenshots but it's not visible.Also there's something fishy going on:
Additional info:
-my graphics card is not overlocked
-Not overheating when leaving vsync off (remains below 60C)
-I'm using the official MSI drivers for my MSI GTX 560 Ti Twin Frozr OC edition (ForceWare 280.26)
-Using VGA cable with a DVI adapter for my graphics card
Here's the exact problem I've found on the internet: Getting Scan Lines in High End Gaming on GTX 560
I keep getting what seems like static line horizontally across my screen I just bought this laptop a couple months ago?
Hp 2000-369wm notebook PC
I have a HP Dv series Laptop, It shows horizontal white lines and the lines gradually increased and now a unable to see the screen even to enter log in password.
View 1 Replies View RelatedI don't have the model on me now, but recently I worked on a Compaq Desktop computer. At random times (could be any program open), it would go to a grey screen with weird horizontal lines. I upgraded the video drivers, ran a video stress test and it went over 2 hours with no problems.
The customer just reported to me that it happened again so I am thinking that maybe it is a faulty motherboard (video built onto motherboard). What do you guys think? I didn't wanna give the customer the run around saying "Let's try 1) putting in a new video card then 2) lets try reformatting and lastly 3) lets replace the motherboard)"
I'm trying to find a third party program that will allow me to expand one display on two monitors. I have a nvidia card, unfortunately nvidia and win7 refuse to create a program that will allow me to put one picture on two screens to get a big picture. They have it in XP but nothing for 7. I have the lasted nvidia driver for win 7 but the software is sadly lacking. I can't believe they don't have a program like in XP. They seem to think people only want separate displays on the two screens... why they think that is beyond me.
Anyone here know where I can get a program that will give me one display in two monitors.
I start up my computer, the bios runs as normal detecting drives etc. then it gets to "loading operating system..", from here it either stays that way or changes to a screen with horizontal blue lines and if you wait a little longer still, other colored lines appear aside these blue lines. This all happens at the top of the monitor.I have tried to restart my PC several times and the same thing happens with these lines. I have also tried changing monitors, unplugging all inputs. Nothing.
View 1 Replies View Relatedso I have a low profile Dell computer in the living room hooked up to an LG LCD TV. It did have an ATI graphics card which used the PCIe slot, and a USB stick for wireless internet. The wireless stick wasn't working great so I've just got a wireless card installed, however it also uses PCIe and there is only one slot. As the computer is not being used for games, the wireless card is much more valuable to have in the slot.When I had the ATI card in there though I could use CCC to adjust the screen over slightly (there is about an inch cut off on the left side of the screen). It is not a spanning/stretching issue, merely just needs a nudge to the left and it will all be good.I have just installed Intel Control Center, but when I click on monitor/tv settings it says that they are not supported.There is no option to adjust this in the Windows 7 display options either, so I'm not quite sure what else to try.
View 9 Replies View RelatedI took some cell phone videos in the portrait position recently which translates to showing only in the horizontal position in MM or whatever editing software I have. Unlike pics, I can't find a plug in or software that will let me flip it from that horizontal to vertical (portrait) position.
View 1 Replies View RelatedYesterday I was playing a video game when My computer froze completly. Ever since a computer crash, my computer starts up with pink lines horizontally when microsoft windows loads and is only displaying 16 colours. When trying to change the display settings, all the video card information is not being displayed. I suspect is a video card hardware malfunction but I could be wrong. When The computer starts, I get a message saying "Windows has not loaded properly perviously" and gives me the option to run the Windows Startup Repair. After running the Windows Startup Repair, it fails to fix the problem and I get the message below:
View 7 Replies View RelatedI'm running a homemade rig, which worked fine on my 42" TV as a "HTPC/Gamer." Moved it from its spot in the entertainment center to my desk and BAM! Locks up or hangs during gaming. Zero activity, temps on my Strike-X drop to ambient, no Ctrl+Alt+Deletes, power button press resets, or power button hold resets. Only option is to flip the power switch on the PSU. Now, here's the kicker, when I lay the case horizontally, it works without a hitch.
ASUS M4A79T Deluxe
AMD Phenom II X4 955BE
G.Skill Ripjaw Series 8GB (4x2GB) @ 1600
XFX Radeon 5970HD
Liteon DVD Burner
LG Blu-Ray Burner
Aerocool Strike-X Fan/Temp Controller
6x120mm fans, 4 on the Strike-X, other 2 straight to mobo headers (fans are not LED or anything fancy)
Rosewill 600W PSU
All stuffed in a Cooler Master Centurion 590.
Now, I've ran a compliment of stress tests with the PC laying flat, no problems or spikes or anything. Furmark, Prime95, Unigine Heaven DX11, even CustomPC (a UK magazines') benchmarking suite for hours, no problems.
I've already updated BIOS for the Mobo and Video. Up to date drivers all around (as of 1/28/2012).
How do you put the Touchpad into the Horiz/Vert mode, and more importantly, how do you get it out of that mode?
View 1 Replies View RelatedOK, just woke computer up from "sleep," and everything is working fine. A few minutes later, all of a sudden, the monitor screen is filled with colored vertical and horizontal lines...and nothing is working nor is there anything else on the screen but the lines. Manually, shut down and rebooted. Opened with options on how to continue. I chose Normal Mode. Computer and screen now working as they should for the last hour.
View 2 Replies View RelatedI've problem with my monitor now, it gray horizontal lines appear suddenly, what shall I do?
View 2 Replies View Relatedno matter what i'm viewing, be it a video on Internet/dailymotion/vimeo/wherever or anything on vlc, the second i go full screen i notice horizontal screen tearing across the entire screen. i managed to lessen it to an extent on vlc by switching to directx output, but it still pops up on Internet videos etc.have also just started to notice it on non full screen videos.if it makes a difference it's around 2/3 of the way up the screen on online vids and 90% of the way up on vlc.i know this problem is going to be hard to pinpoint since it could be any number of things, but i have the feeling this is all because i have a setting too high/low somewhere.
View 3 Replies View RelatedI first noticed FF flashing when version 7.0 was released, it's still the same in version 7.0.1. Only page I found so far is The Beginner's Guide to Using QoS (Quality of Service) on Your Router - How-To Geek It is ok using IE9.
View 1 Replies View Relatedhow do you flash a bios for a motherboard using a usb?? I have an Asus P5KPL-CM and need the lastest bios cause it fixers a problem i have with my audio....
if someone could let me know how to go about this i wound be ever so greatful
NOTE: I have the right bios file.... I have no Floppy drive.
i never flashed bios before and have recently noticed there is an update on the Acer web site. The bios mine is running on at the minute is R01-B3 and the new one is R01-B4.
Is it worth updating to the new one?
Will Win 7 take to it?
What will be the benefits of the newly released bios over the one I have?
How do I go about doing it and are there any safety precautions I could take so I can roll back incase I F it up?
I have never done this before. My computer is two years old. Is this something that should be done every so often or does it need to be done before I install .
View 5 Replies View RelatedI'm currently running a GeForce 7900 GT/GTO card that I've never had problems with. I updated the drivers for Windows 7 from NVIDIA's site.
However, whenever I go to switch display settings, open a video, open a picture, or just about anything else graphically intense (including start-up) my screen freaks out. The screen will go a solid color (of whatever the background is), get lines through it, and then start flashing. Then after 10-20 seconds (or whenever the program I was trying to run is finished) it will revert back to normal.
I can run Aero just fine. I can run normal programs such as the internet browser, control panel, etc. fine as well. It's just whenever I try changing my display settings or running a video, opening a picture, etc.
Does anyone have any ideas as to what might be the problem? I've run GPU-Z and my card isn't overheating either I don't believe.
I have this weird thing going on in my laptop. On any program a drop down menu will appear and then starts scrolling down. It's like flashing cursor and not letting me type anything. It happens for all programs, whether I try to save a file or try to type a command in run. Even when I try to open a small sized notepad and try to scroll it down, it goes back up automatically and not coming to the end. Is there some kind of virus or an intruder/trojan hunter?Already tried running MS virus scanner. alkaparikh has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 4 Replies View RelatedWonder if anyone could help or provide some ideas.I'm trying to get my spare laptop to work.Every time I turn it on it just boots to a flashing cursor on a black screen.The hard drive in it is new - without windows 7 installed yet.I've tried booting from my windows 7 disk. Set optical drive to first in boot order. Just goes to flashing cursor, does not say "press any key to boot from cd" Tried booting from usb. Set usb hard drive to first in boot order. same as above.Mem test says ram is ok, reports cpu and ram amount in bios ok Laptop is hp compaq nc6320
View 5 Replies View Related