Ethernet Connection Not Recognized On Windows 7?
Oct 17, 2012I just installed a copy of Windows & Ultimate but when it finished my ethernet cable was not recognized. I tryed to restart my computer and modem but it didn't work.
View 1 Replies
ADVERTISEMENT
Resolution Not Recognized - HDMI Connection Not Recognized?
Sep 29, 2012I have a Zotac 570 gtx connected via HDMI cable to my Asus VE258 LED monitor.I've had this video card and monitor setup working before with the exact cable, card and monitor.Something changed in my system where the monitor is no longer recognized for what it is. When i go into my Nvidia control panel under change resolution 1.Digital Display, 2. DVI-PC Display - Resolution 1080p 59 Hz. There is no DVI cable plugged into the computer and the monitor is set on HDMI input. When i go to my Audio playback devices, the HDMI connection does not show up at all, even as disabled or disconnected.When i go to play a game (Diablo 3, Skyrim, Farcry2) The game either doesn't open (skyrim) giving me the error that resolution is not recognized (but then does not give me any resolutions to choose from in the options menu) or will play (Diablo 3) but is stuck on extremely low resolutions with only 2 options.
Here's what i've done. Contacted Zotac and had them send me the most recent drivers for the video card. Uninstalled originals and re-installed the new ones. Contacted Asus (they say its not the monitor as long as its set on HDMI input) I am unable to find a driver that will make my computer (Windows 7) recognize the monitor for what it is. Zotac failed after their attempt with the driver and told me to RMA the card. So i did... i waited a month.
Loaded Windows 7 Home X64 Now Printer / Ethernet Cable Not Getting Recognized
Jul 4, 2012I just loaded a new copy of windows 7 home 64. Now my computer doesn't recognize my printer or Ethernet cable.
View 6 Replies View RelatedEthernet Card Not Being Recognized
Feb 25, 2009I installed the 7022 x86 version of Windows 7. Everything installed fine and there were driver issues which I anticipated but my Ethernet port is not working on Windows 7 or any other OS for that matter.
It�s a very strange situation. After it was not seen I Windows 7 I booted from my 2nd drive which has Vista on it and it was not seen there so I booted from my XP drive and it was not seen on there either.....
I have re-downloaded all the drivers for each version of the OS but none are making the NIC discoverable.
I have an nVidia 680i SLi & I am using the on board port.
Ethernet Connection Is Not Being Detected In Windows 7
Jan 12, 2013I have faced a problem just a few hours ago for the first time that my Ethernet Connection is not being detected.I have a Lenovo essentials b570-e laptop, with a core i5 processor and 2 GB Ram.I have never before experianced this problem. I have already tried via another cable, connecting it from the other way and stuff like that. It works on my Brother's Laptop. I also know for certain that is it not a hardware issue as I have tested it on a live boot from Ubuntu 11.10 that I had lying around and the internet worked perfectly fine. So I know that the problem is with windows.
View 5 Replies View RelatedWindows 7 Ethernet Cable Connection Not Working?
Aug 19, 2012For the past half a year I have had my PC, I've always had some problems with my internet connection and Windows 7. I've always thought that it's a case of bad hardware and such but it's starting to look like it's Win7 that's giving me the finger.I've mainly been using a WLAN USB-interface and from the very beginning problems have been occurring. At first, the connection would be really unstable. It might stay up for 2 minutes or for a week. Rather annoying. I tracked down the problem and thought I had found a solution. Apple's Time Capsule has also a WLAN feature and it was Time Capsule's network I was using. I found out that Windows 7 and Time Capsule weren't all that compatible so I had to find another solution. Luckily enough, there's another WLAN in our household. It's much farther away than the other so I was afraid I might have some connection issues. And I did. The signal was weak at times and I just couldn't establish a connection. So, I moved my PC to another room and it started working properly. The distance from the router was cut down from maybe 8 meters to 2 meters or so.However, I couldn't keep my PC in that room forever and it seemed odd that when I moved the PC a few meters away from the router, the signal disappeared. So, that in mind, I went and took the USB-interface to the place I bought it from. I figured it was the interface because all the other of my devices connected to the Internet worked fine. The room is no Faraday cage. They still have the interface and I didn't get a replacement for the time being so I had to connect the PC to the Internet with a cable. At first, the MOBO wouldn't recognize the network. Then I rebooted and replugged all the cables and the ethernet LEDs started blinking. I was happy - I even checked that the lights indicated that there was data activity and that there was a 100 Mbps connection. But still - I oouldn't connect to the Internet. Windows 7 would only say that there're no connections available. I started realizing that it might be Win7. So I booted the PC up with Ubuntu since I have it on dual-boot and surprise, surprise - the Internet connection works perfectly. And here I am writing this post. The cable connection has worked with this PC before and it works now with other PCs, too.
View 5 Replies View RelatedCannot Use Wired Ethernet Connection
Jul 23, 2012Recently the power went out in my house. Ever since the power has come back on, I haven't been able to use my wired internet connection. When I look at my devices, my Intel 82566 Gigabit Network Connection has the status "This device is not working properly because Windows cannot load the drivers required for this device." I've tried re-installing and updating the driver, but I can't tell whether I've done this successfully. In any event, it still doesn't work.
I have a Dell XPS 410. Let me know if you need any other information.
Wired Ethernet Connection Constantly Dropping
Mar 19, 2012I have an HP computer, with Windows 7 64-bit, about 4 days ago, my desktop's internet connection will continually drop out and come in ever 30 seconds or less.I have ran norton constantly and ran malawarbyte twice with full scan. My connection allows me to get online, but with the connection constantly dropping, i cant watch any videos because the connection will cut out and when online internet explorer will come up saying cannot display web page. Ive tried google chrome and media firefox and both have the same problem so i know its my connection and can see it dropping at the bottom right of my screen. My router is NVIDIA nForce 10/100 Mbps Ethernet.
View 2 Replies View Related2 Computers Crossover Ethernet Connection Not Shown
Jun 29, 2011Got Two Pc On one table and I always saw both PC's and I was able to transfer files and share a printer.Now I can only see my PC on the Network.
View 9 Replies View RelatedCan't Use Ethernet Network Connection And USB Wireless At Same Time
Nov 2, 2011In our office we have our PC's connected to our inter-office network server via the Ethernet ports (Local Area Connection) with a hard wire to a hub, that in turn runs to our server. We also each have a wireless internet connection on our PC's via a USB wireless adapter. When we were using XP this was not a problem to have access to the server AND the internet at the same time.
When my PC died last year I bought a Dell Inspiron 560 slim tower with Windows 7 to replace my XP machine. The first problem I ran into was that I could no longer use the wireless internet connection AND the hard wired connection to our server operating at the same time. If I stayed connected to our server, I will not have a wireless connection. If I go into the "Local Area Connection" properties and "disable" the connection, I almost instantly get my wireless connection back. The big issue when doing this is if I leave our database program (ACT!) open while the server connection is disabled, I have to shut down ACT!, then restart it before I can connect it to the server. If I try to without closing and reopening it I get all kinds of errors.
So, in the mean time, I have just put a shortcut on my desktop that allows me to enable and disable the Local Area Connection when I need internet access.
A couple days ago, my boss's PC grabbed a virus that slipped past McAfee (that program is now gone!!) and really hosed up his PC. He bought the Windows 7 upgrade software and wiped the hard drive and installed Windows 7. He is now having the same issue as I am.
For what it's worth, he is using a Belkin Wireless-G USB wireless adapter, and mine is a Netgear Wireless-N USB adapter.
Is there any way we can have the two connections operate at the same time like they did in XP? It really becomes a pain sometimes when we are on the phone with a client and we need to jump back and forth between info that is online, and info that is on our server that we access through ACT!.
Wired Ethernet Connection Constantly Dropping?
Mar 20, 2012I have an HP computer, with Windows 7 64-bit, about 4 days ago, my desktop's internet connection will continually drop out and come in ever 30 seconds or less.I have tried to reset my router and modem and it did not help. I have ran norton constantly and ran malawarbyte twice with full scan. My connection allows me to get online, but with the connection constantly dropping, i cant watch any videos because the connection will cut out and when online internet explorer will come up saying cannot display web page. Ive tried google chrome and media firefox and both have the same problem so i know its my connection and can see it dropping at the bottom right of my screen. My router is NVIDIA nForce 10/100 Mbps Ethernet.
View 3 Replies View RelatedWired Ethernet Connection Unstable, Dropping Every 5 Sec And Reconnects
Mar 27, 2012I have had my computer for 3 years and it has worked great, i got a new router bout 4 months ago and it works great. about 2 weeks ago my desktop's connection which is wired, basically stopped working. It lets me get online, but the connection either keeps dropping or just doesnt work. Ive watched my connection and it will disconnect alot and instantly reconnect. I can get online but my page takes half a minute to load, and sometimes it just wont load and say it cannot connect to the web page. I have tried google chrome and media firefox and they dont work either. I have reset modem and router many times and that didnt help even a bit. I have switched routers and that didnt help either. In networking safe mode, my connection is completely stable and it runs fast and loads everything. I have ran norton and malawarebytes many times and my connection is still unstable. I have stwitched ethernet cords too and that didnt help either. I have two labtops and a ps3 and their connection works completely fine so it would just be my computer. Since it runs great in networking mode, it might be hardware but i dont know what. It might not be hardware though because i am nowhere near a computer knowledgable.
View 6 Replies View RelatedComputer Doesn't Detect Wired Ethernet Connection
May 6, 2012I've been having internet connection problems for the last couple weeks, i moved my entire setup closer to my router, and i still had bad internet. I searched around my house a little bit and found ethernet cables, i connected them and everything but, windows doesn't seem to detect them (well it does but it doesn't use it as the connection)
View 9 Replies View RelatedEthernet Adapter Local Area Connection: Media State Disconnected?
Jun 6, 2011Im trying to get my Ethernet adapter local area media connection working but i dont no how?here is what the cmd text box for it says,Ethernet adapter Local Area Connection: Media State . . . . . : Media disconnected Connection-specific DNS Suffix . :and thats all that box says.
View 1 Replies View RelatedLocal Home Network Via Ethernet Hard Connection Through Wireless Router
Aug 12, 2011I have Brother MFC7340 printer connected to my HP home premium Windows 7 64 via a USB port. There is no ethernet connection. I want my Windows XP computer, connected to the local home network via ethernet hard connection through my wireless router to be able to print either with a hard connect or wirelessly to this printer. I am having trouble figuring out what to do and have tried various strategies to no avail.
View 1 Replies View RelatedWindows 7 "Local Area Connection Doesn't Have A Valid Connection"
Sep 5, 2011I am getting the above message after troubleshooting. I have just switched to a new computer with windows 7 pre-installed.
All fine on old computer running XP Getting unidentified network + above error message. enabling/disabling card, checking for Bonjour service string and the like but no luck.
DNS Not Responding / Connection Specific DNS Suffix Under 'Tunnel Adapter Local Area Connection'
Aug 19, 2012I started getting a "DNS not responding"? on my desktop. All my wireless devices work fine, and when I turn off my laptop's WiFi card and plug it into the same router it works as well.I've done some Googleing on the issue and none of what I found has helped.When I do an ipconfig on each maching, the thing I notice is that on the working laptop I have an entry for the "Connection specific DNS suffix under the "Tunnel adapter Local Area Connection", where on the desktop that's not working the suffix is blank.
View 4 Replies View RelatedInternet Connection Over An Electrical Powerline Instead Of A Wireless Connection?
Mar 23, 2011Internet connection over an electrical Powerline instead of a wireless connection?is it easy to setup, reliable, fast,..?More in particular a D-Link device:DHP-307AV PowerLine Homeplug AV Kit
View 6 Replies View RelatedMake VPN Connection Over Multiple Internet Connection?
Oct 29, 2011is it possible to make a VPN connection over multiple internet connection ? if this is possible then you can make multiple connection transparent to other applications running on ur pc.
View 5 Replies View RelatedNokia E66 Connection Internet Connection Problems
Dec 1, 2009I am using a nokia E66 to connect to the internet at home. My pc at home is running windows 7 home premium 64 bit. I am currently using nokia pc suite 7.1.40.1. All the software installed without any problems. The problem that I am having is that after I connect to the internet, I can only roughly download / upload about 5MB of data and the connection will time out. I do not get any error messages that is did timeout. The only way I know this is that I stop seeing data being transferred in Network properties.
I then open my e-mail client to see If I can connect with a POP account and then I get an error saying it could not connect to the e-mail account. I then have to disconnect and reconnect and try again. This does not seem to affect web browsing though, only when I am downloading files. Like Steam will start update and stop, windows updates will start download and stop and so on.
I initially thought it was a problem with the network operator, but when I boot back in xp (my pc is set up to dual boot between xp and 7) every thing works fine. No download time outs. Is it the nokia software that is not supporting 7 100% yet or am I missing something else?
USB Device Not Recognized In Windows 7?
May 24, 2012I am trying to connect a Blue Snowball USB Microphone to record stuff with but when I plug it into the USB port it doesn't work. Windows recognizes the device and starts trying to install the drivers but then it fails and gives no explanation. In Device Manager it shows up as "Blue Snowball" but has a yellow exclamation point next to it. When I click on it and try to install drivers it says that there are no drivers available. The light is on the device so it's getting power. I checked their troubleshooting guide and turned the USB cord in the other direction. I've restarted my computer a few times, all to no avail. I am using USB 2.0 ports and my OS is Windows 7 - Professional 32-bit.
I consider the sound card but I can play music and use skype (if I connect a 3.5mm POS microphone to the back) just fine.
Steelseries Xai Not Recognized By Windows 7?
Sep 13, 2011Recently purchased a xai mouse from steelseries. I plugged it in and windows stared to automatically install the drivers. When it's done I try to use it, it won't track and none of the buttons work, but all the lights are on. I then downloaded the software from the steelseries website for this mouse, it could tell whether the mouse was connected or not. After changing a few settings I tried to use it and the mouse would still not track, but the buttons worked. I can't find this mouse in device manager.
View 1 Replies View RelatedAfter Upgrade To Windows 7 CD-ROM Not Recognized?
Dec 6, 2012I've purchased a used Dell Precision 490 'born' June 2006 and 'driven only on Sundays.' The seller upgraded it for me from XP to 7 before shipping. (The genuine Windows 7 DVD was sent along with it.) The CD-ROM (TSSTcorp CD-RW TS-H292C ATA Device) is not recognized.The DVD drive works fine. The seller says the CD drive worked fine before with XP. When the computer boots up and also when restarted, the CD drive is listed as E: under "Computer" and also in the Device Manager. It does respond to a right click on E: to open the tray. When any of several CDs are run, the 'doughnut' spins for 5-8 minutes resulting with "E: refers to a location that is unavailable..." Or using the Task Manager to exit causes a gray out with "Computer not Responding." Then E: is no longer listed under Computer or in the Device Manger. The CD tray will not open.
With the CD inside it takes 5-8 minutes for the computer to shut down or restart. The CD tray can only be opened when the computer is first (re)starting. Without the CD inside start up is within 60 seconds. Using the Device Manager to update, the response is 'The best driver for your device is already installed.' Following Windows 7 troubleshooting, I've also uninstalled and rebooted to reload the driver. Checked the cables disconnecting and reconnecting the CD drive and mother board. Checked the registry for upper and lower filters (none were listed so none needed to be removed) and followed the numerous other measures listed in a thread, November 2, 2010... missing upper/lower filters registry cd/DVD - Microsoft Community Still unrecognized as above
Router Not Recognized By Windows 7?
Feb 23, 2011So I just finished building a computer..got everything running on it, and now im sitting at my windows 7 desktop...my issue here is I can't get access to the internet...I am wondering if I need specific drivers or something..I thought, perhaps, it would be a simple "plug and play" procedure where windows would recognize it right away...however, that's not the case...I have tried removing the cord from the back of the computer into both ethernet ports ..I see an orange led to indicate that the cord is being acknowledged and there is probably some communication...but windows tells me there are no connections
I am using an Asus p8p67 deluxe motherboard with two ports at the back for the internet.. PS: its a bell 2wire modem/router
Ati 650 Pci Card Not Recognized In Windows 7?
Sep 20, 2011Windows 7 doesn't show the card in device manager or anywhere.
View 6 Replies View RelatedWindows 7 OEM Disc Not Recognized?
Jan 24, 2012I'm currently looking to replace XP with windows 7 on my old PC, one so I can use it as a media centre for my TV and it should improve the performance of my machine a little.
The problem I have is, I bought a copy of windows from my local computer store, they've given me an OEM copy (not sure if this matters) and when I put it into the DVD drive it accesses for a coupe of minutes then nothing happens.
I have read that there's a lot of issues out there with windows 7 & installs and I guess I want the easiest way to get around ths issue.
What I've tried:
1. restarting the PC with the disc in it but it just booted XP from the hard drive
2. changed my bios setting to boot from DVD and restarted. The couple then hangs on a black screen for around 20 minutes and then boots XP.
3. tried opening disc in "my computer" but no files are visable, so I can't select the setup file
4. I have checked the DVD drive is working fine and it will even recognise my other copy of windows that was provided with my new PC, however I get an error along the lines of "incorrect installation disc select correct installation disc and select custom install".
5. I tried the OEM disc in my new PC and its recognised, so disc is fine
6. I checked compatibility using windows upgrade advisor it seems to say I have no conflicts and can either use 32bit or 64bit
7. I also download CPU-Z and checked that the processor is 64bit compatible and supposedly it is.
The only thing I can think of is to do a full clean install so format my harddrive and install, I'm happy to format the drive as I've backed everything up, however I've installed operating systems for years and never had this many issues. I'd prefer not to have to disconnect harddrives but if I have to then I will. I just don't see a reason why I should have to go that far to install an OS.
Ram Not Recognized Windows 7 Laptop?
Apr 18, 2012I have a 32-bit lenovo laptop, and i installed a 4gb ram memory into but windows doesnt recognise it and it wont let me get past the post.
View 5 Replies View RelatedCamcoder Is Not Recognized By Windows 7
Jun 4, 2012My camcorder is not recognized by my Win 7. Sony told to get RCA to USB cable. Just received the cable but no connection.
View 1 Replies View RelatedWindows 7 On A CD (and USB As Well) Which Does Not Get Recognized On Laptop
Jul 21, 2012I have windows 7 on a CD (and USB as well) which does not get recognized on my laptop (Samsung NP RV520). I can boot from both successfully on 2 other machines.My boot order is cd, usb, hdd .When I insert windows7 cd, it is ignored and I get the choice to start the existing win7 installation in normal or safe mode or repair. (I have succesfully booted XP and I'll try Ubuntu tomorrow as well.)When I insert windows7 usb, computer freezes on the "Starting Windows" screen with logo.The existing installation of windows 7 freezes on the login screen, no matter what mode I use. It takes about 15-30 minutes for it to get to the login screen (and then it freezes) or it freezes before and shows a blank black screen, for hours.I did install UBCD (Ultimate Boot CD) and tried to use boot managers from there, but all of them gave errors when I tried to boot from the windows 7 cd/usb, or the cd/dvd/usb did not get detected at all. [code] I also booted miniXP from Hiren CD successfully and ran a bunch of diagnostics tools. GMER showed 5 results in rootkit/malware, but I'm not sure how to interpret them.Do these issues sound like something a virus in boot sector or MBR could do? That's a hunch I have, but I'm not a techie so I don't know.windows 7 was reinstalled at a service, and same problems started after a few days again.
View 2 Replies View RelatedWindows 7 Installation Disc Not Recognized
Jul 15, 2012To start off, I've been having massive problems with my current laptop. Mainly just the OS which started going wonky after a Microsoft update about a month back. Ever since, I've had to deal with slowness, lagginess and many errors. After trying to fix these things manually, such as updating, removing old files I don't need as well as programs, I had to eventually give in and do a system restore. And this is where my other problem begins. For one reason or another, the previous restore points I had are mysteriously gone. I only had one from around 2 days ago. All the ones I had from as far back as a month are history. Why I do not know. I usually check up on that to make sure I have one from way back. Perhaps I may have deleted them without knowing. So much to that.
I really want to do a complete reformatting or system installation. A clean one. However, my DVD drive doesn't recognize or acknowledges any of my OS discs. None of them. And they're all purchased from Microsoft. Not even the ones that came with my laptop are working. All other discs work. Such as DVD's as well as regular CD's. I updated the DVD drivers and still nothing. I tried Fixit and still nothing. I don't get why it only does this with the Microsoft installation discs.Currently, I am using Windows 7 Ultimate on a Dell Precision M4400. 32bit. The DVD/CD is a Toshiba TSST corp DVD+RW TS-U633A. I already tried cleaning the DVD drive as well as making sure all the installation CD's have no signs of damage. And they don't.
MS Intellimouse Explorer 2.0 Not Recognized In Windows 7
Jan 31, 2009I did a fresh install just now... my MS Intellimouse Explorer 2.0 mouse is not working. I tried re-syncing it with the dongle to no avail. It gives me a warning saying that some functions may not work until a USB or bluetooth mouse is installed.I downloaded the Win7 beta drivers (both keyboard and mouse) from MS.com, no dice.. I uninstalled them both and tried the vista drivers with the same result. Odd thing is, it doesn't even show up in the devices menu under my computer, nor in the mouse profile under the hardware tab.I'm dual booting with my XP machine and the mouse works perfectly.
View 3 Replies View Related