I have just built a new gaming PC and according to every forum my hardware and the installation of said hardware is sound. I have an ISO verified copy of windows 7 but during file expansion it hangs at 22% and gives me the above mentioned error messageMy ram is compatible and correctly configured in BIOS. I am using one stick and have tried all slots. I have used SATA config AHCI and IDE to no avail. Attempts at booting from a USB drive have also been unsuccessful. My PSU is more than enough and according to 12 different instructional videos as well as the various instructional manuals everything is installed correctly. I have reset CMOS jumper and was again met with failure to install Win 7
I have had number of errors, the latest being 'Error number: 0x80070017' when trying to install windows 7. I'll start from the top. Originally I had problems exactly the same as on this thread below, incl same model PC except with Vista, also USB mouse often freezes or stops working: [URL]. I ignored the problem until crash during online streaming (assumed problem was to do with graphics card), usual multi coloured horizontal lines on monitor, repeating sound. Manual push button shutdown.
On restart, black screen no boot activity. Recovery DVD doesn't work/ don't have all the discs. So I bought Win 7 upgrade instead. Now I have a combination of 'BOOTMGR is missing', and when that doesn't occur PC freezes on any screen you can think of. Sometimes I can get all the way to 'expanding files' when installing Win 7, then I get Error number: 0x80070017. I have tried copying DVD to USB drive (in case it's a dvd drive speed problem), but then cannot copy the whole DVD usually there's an error stopping me (on another pc).
Also no OS available to select during repair system selection on Win 7 upgrade/install screens. Finally error regarding 'USB drive unplugged during boot' or something to that effect, also tells me DVD or CD or hard drive might no be connected properly. Had that message twice, again locks up. I've checked inside, every thing connected.
So to summarise: Bootmgr missing (on boot) Error number: 0x80070017 (on Win 7 install) No OS available to select (System repair) Constant freezing
I made the HDD formatted and it's in NTFS format. The disk for some reason says Bootmgr is missing. Also when I try to install Windows 7, it says error code: 0x80070017. I don't have any OS installed. I've tried the repair disk thing. Also my BIOS is PhoenixBIOS (or something, that what it says on the BIOS Setup Utility menu) and I don't know how to disable AHCI mode.
Just inherited a pc, and bought a brand new 1tb hdd yesterday to install windows on. I was foolish at first by not changing any of the bios settings (was a long time since I have done an install) and just left it as it was. I got through to installing windows and it stopped at expanding files with the above error code, which I have heard is really commonWindows cannot install required files. The file may be corrupt or missing. Make sure all files required or installation are available, and restart the installation.Now I am certain there is nothing wrong with the DVD, as it is the same one that has been used on two other PC's. I tried turning it off and restarting, that was when I got another error load up - Bootmgr is missing!After this I restarted it and changed the bios settings to boot from the DVD drive. I tried doing a repair on this through the disc.
Went through all the settings and typed Bootrec.exe/REBUILDBCD in command prompt but that came back fine. I tried clicking startup repair after this but it did not restart, so I just went through the motions and restarted it manually as by this point I was getting frustrated. Upon restart I went through and booted from the DVD, and it went straight through. This time I tried re-installing but deleted all the partitions on the drive which had appeared since trying to install. However the same error message has come up again
I have Dell Inspiron N5010. I was using windows 7 home basic 32 bit os. I wanted to change it to windows 7 ultimate. So I have inserted windows 7 Installation disk into CD drive. Then I went to through the installation and I chose the Custom as the installation type.When the partition page appeared, I have formatted all the disks including C which contains windows files. Then I got 298 GB unallocated space. Then I split them in to 4 partitions. Then I have selected one partition to install the windows. Then installation started .
Copying windows files succeeded. Expanding Windows files(0%) is still be like that for 20 minutes. Then I got the error message like: "Windows cannot install required files. Error code 0x80070017". And I thought it would be the installation disk problem. But it works fine in other systems. I tried several disks. No use. Also I got another problem. When system boots I tried to enter into BIOS using F2 and F12 which was mentioned in screen. But it did not enter into the BIOS, Instead it goes to the installation.
I deleted all my hard drive partitions and formatted my hard drive to wipe it clean. Now when I try to install Windows 7 onto my computer, the DVD boots and the installation begins. The installation will complete the "Copying windows files" task in seconds, but sticks at 0% on "Expanding files" for about 30 seconds. I will then receive an error that reads "Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the application. Error code: 0x80070017".I researched this error but couldn't find a resolution. One suggestion was to download my hard drive's drivers onto a pen drive and load them in the installation, but t also tried installing Windows Vista and received the same problem.The error in this case has nothing to do with the copy. I have used many different Windows 7 builds, many different DVDs, burning at different speeds, all producing the same problemOnly when using the Windows 7 RC disc I was asked to "load drivers" as a requirement.Other builds didn't require me to load drivers.
Can't install Windows 7 from original DVD , I formatted the HDD twice and still, same error. The installation stops after 10-15 min with this error code 0x80070017 I know the media is in great condition, so exclude this problem. Maybe HDD failure ? I did the format and wipe via usb with MiniTool partition wizard .
i recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+ 2 Hitachi HDT725032VLA SCSI 320 gb hard drives Nvidia Geforce 8800 GS Graphics Card 3gb of system memory
when i click format a 150 gb partition space in disk management option i recieved the following message "An unexpected error has occurred. Check the System Event Log for more information on the error. Close the Disk Management console, then restart Disk Management or restart the computer". and the drive does not appear like other drives in MY Computer?
I have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
i have a toshibio satelite model # psc16c02q00m, I've tried to reformat my computer, i have the back up Disk and when i started my computer i press F12 to get the boot bios where i made it boot from disk putting my back up cd#1 into there. it was working fine till i put in disk three, from there i got a F3-F200-002 Error said an error has occurred please press OK to turn off the computer. and that is the only option. ive tried repeating the process but now all i get to is this screen even when i try to but off the hard drive im assuming my windows has been cleaned.
Recently whenever I've used an .exe installer I'll get an error as soon as I click start after choosing the directory, in the picture example I include below, it's of SA-MP, but it happens with any installer I try and use. Installers have worked previously, it's only recently it's stopped working.The error is;Error opening files for writing?
What I've tried;
-Full system scan with Comodo AV.
-Revealed hidden files and folders.
-Run the installer in both compatability (Even though it does work on Windows 7, and as an Administrator).
-Also done the scan on CMD (can't remember exact command).
I am trying to run a certain program and it worked previously for a few days, and then today all of the sudden its giving me this error.Is this a windows thing I can try and fix? Or is it program specific (this program doesnt have much support unfortunately)
I recently re-installed windows and am now trying to install the DirectX End-User Runtimes (June 2010). All goes well, it installs everything, but as it finished I get this error: I have tried redownloading, using other installers and updating my graphics drivers. Nothing will work. It's probably worth mentioning that the first time I tried installing, about a week ago, my computer totally froze in the middle of the install and I had to force restart.
I am having difficulty with drivers on my Acer Aspire 5253 system using Win 7. It is a couple months old. Within the last month, I have been getting random blue screen of death error messages in which the computer shuts down to prevent damage. The computer boots up fine without any problems. The blue screen that I see contains the same information each time.
I have Windows 7, Live Mail. Mail with attachments come in with no problems, like photo attachments, but my mail will not go out with photos attached. They are not huge files. I get an error message "error/tasks" but then that screen freezes.
Just installed windows 7 about a month or so ago, running great, only every now and then if my system is idle and I wiggle the mouse to make it come back on , it just reboots automatically[CODE]
I'm working on a client's laptop, compaq Presario CQ57, 2gb ram 250 GB HDD.
I installed a new harddrive and installed a new copy of Win 7 Home Premuim x64 After it reboots, it just hangs in the welcome screen with the Windows logo.
I reboot via Windows 7 repair disc and run C: chkdsk /r and I get this message "disc check error 766f6c756d652e63 3f1"
I get this error using both a HOme premium DVD and using the HDD on this system ... best I can tell it is not giving me options about what sort of boot to attempt. Not sure the hardware is healthy but there are no removable devices present [that is no sd card, no usb thingies plugged halfway in, just the dvd drive which is either empty or with the Windows 7 disc, depending on attempt]
It's running Windows 7 Pro x64. When I attempt to start it up, it starts up the Windows Error Recovery program, suggesting that I launch Startup Repair, and allowing me to start Windows normally. In both scenarios, I get the same error.When I start normally, I get the Starting Windows text, then I get a solid white bar with Windows is loading files... above it. It fills up halfway, then I get Windows Boot Manager error 0xc00000e9: An unexpected I/o Error has occurred.This computer is a stock Dell Inspiron 530s, with no new hardware devices added or removed in recent memory (other than starting from a USB stick once or twice, but not since I installed Windows 7 Pro x64 on here).How should I proceed?hould I plug in a USB stick I have Xubuntu 9.04 on and backup all his files before I do anything?
I am using Windows 7 32-bit Premium. I'm trying to run a Batch file with several dll's, and I'm getting this error:Banner: Error Occurred - Add LicenseBody: Unable to enumerate resources. Error Code: 15106I have tried to google this, but I haven'tAlso, if I even try to register any of the Batch's DLLs manually, I get this error:Banner: RegSvr32body: The Module "C:Bla Bla Bla...." was loaded but the call to "INSERT DLL HERE" failed with error code 0x80028011c.For more information about this problem, search online using the error code as a search term.
I am struggling to fix the error that I get upon startup on my Toshiba Satellite L655 which Reads"RunDLLError in C:Users(my name)AppDataRoamingactxprxy1.dllMissing entry:IgwqI just realized that this isn't referencing actxprxy.dll - it has a "1" stuck in there which is raising a red flag for me and may be why all my google searches come up empty.I have updated windows, which I didn't update currently because I keep it up to date, I have run Microsoft Malicious Software Removal Tool which found nothing, I have run Malwarebytes which found nothing I have of course run my current anti-virus, malware, registry cleaner software and it says all is good too. Nothing is running poorly on my computer but I am starting to think that there was something that happened and my computer was able to remove it but maybe not all of it or there are damaged files from it? I am not super computer saavy but I do pretty well and can definately can follow good directions.
i downloaded a disk image iso file for one of my programs. i mounted and ran the image. the setup.exe file runs fine but when i make any selction i get a "error calling shell execute. error code: 5" message and the program terminates.i tried it on a xp machine and also burned a cd but am still getting the error message
I recently switched out an older Netgear router for the Netgear WNDR3300. I have a 1TB WD MyBookWorld connected via ethernet to the router. Ever since the router switch I have been having two specifice issues:While uploading videos to Facebook, the video will upload anywhere from several MB up to over 100 MB, then stall, saying it's still uploading but trust me, it isn't. I can copy files/folders from the networked hard drive to my computer flawlessly, but when I try to copy files/folders from my computer to the networked hard drive, it copies anywhere from a few seconds to maybe a couple minutes then stalls out, giving the error message: "Network Error. There was a problem accessing [\SERVERFOLDER]... Make sure you are connected to the network and try again." with Retry, Skip and Cancel. When cancel is pressed it gives: "An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem. Error 0x8007003B: An unexpected network error occurred.
Other useful information: on the new router, the WNDR3300, if I use WEP security, I can copy files/folders to the hard drive, no problem. However if I try to use WPA/WPA2, the abovementioned problems occur. I would use WEP and just forget the hassle, but WPA2 is much faster and more secure, so I really want to get this fixed.I also believe the two problems are somehow related, considering they both involve working for a few seconds to a few minutes, then stalling and failing. Could this be somekind of authentication or something to do with WPA/WPA2 that I'm doing wrong?
Before my computer was working fine when i am connecting to the internet using a portable usb internet huawei. Then one morning when i tried to connect i got this "Error: 720".
