I'm running windows 7 ultimate 64bit on my PC, with a samsung printer connected directly to it via USB.trying to share this printer results in 0x000006cc error.I tried disabling the firewall but it didn't make a difference.I made some changes to the homegroup, disabling and enabling printer sharing, but it still didn't work.
I have a USB connected Canon iP4500 printer connected to my Win7 x64 box. I can't seem to share the printer. Every time I try, I get an error as in the picture below.It says "Printer settings could not be saved. Operation could not be completed (error 0x000006d9)
And also complicated, 'cos not even my CISCO Network teacher has been able to give me a solution. I think I need some smart people here The thing is that I can't share my printer (connected by USB to my PC) with my laptop on another room, over the local network (in Windows 7 the name is Home Group).The printer model is not relevant because time ago I was able to do what I'm trying now.All my configurations are OK, at least the basic ones, because there's definetely something wrong with my PC, and here's why: if I take my laptop and put it next to the printer and connect it to it (by the same USB cable), I can access the printer with my PC, while it's been shared by the laptop.That proves that the internal network is fine. Also, all the configurations of the printer and also of the home group are literally same in both PCs, the big one and the laptop.
Both PCs run Windows 7. I have tried this, Connect to printer error - Microsoft Windows Vista Community Forums - Vistaheads, but it didn't work.The printer is also properly installed on my PC, it is not a driver problem or something like that.My AV is ESET ESSBE 4, but I don't think it's related, because I have tried deactivating its firewall, and also, on the laptop the AV is the same and theprinter did work.The services are also equal in both PC's now. I have even tried changing the network adaptor on my PC (from Ethernet to Wifi). Nothing.I recently had problems with the home group, but they are solved by now. I guess the source of the problems is the same, but I don't know where else to look.
I have a laser printer that is abandoned by Canon (ImageClass D761).However, I have an old XP notebook that I can print to it..Can I share the printer through XP and print to it via Windows 7? There are no drivers for it in Windows 7..Or will I just have to make PDFs of everything I want to print and send them to the XP notebook and print from there.....?
I upgraded to Windows 7 Home Premium from Vista on my desktop. My home wireless networ was running smoothly. Since the upgrade I am no longer able to access my printer (Canon i9100) from my laptop running XP. My XP recognizes the network complete with my W 7 desktop and my son's Mac mini. The XP just will not connect with the printer the printer is a USB printer that functions well if directly plugged into the XP. When I try to print from the laptop with the printer plugged into the Win 7 desktop tho, it doesn't find the printer.
When I try to "add a printer" to the XP through the Win 7, it keeps wanting to download the correct printer drivers but cannot find them anywhere. I have the original disk that contains the drivers but it will not load onto Win 7 (doesn't like 64 bit). Canon does have drivers for 64 bit so the printer works fine on Win 7. Is this too complicated a post? It's late and I'm pretty frustrated with the whole subject.
Ok so i made a homegroup and set it up on the other PC, i can get info off my sons PC but he cant use my printer or see my files. Whats going on ? I have the printer set to share i cant even see it on his PC. This file sharing stuff is not my strong point, can someone try to ease my burnen. All i need to do is let him share my printer.
I have two windows 7 computers. computer-A is connecting EPSON printer and I have enabled the file and printer sharing function. The file sharing function is working fine. Then I tried to add the printer in control panel on computer-B, it sees the epson printer but when I try to install the driver (download from computer-A) then it say unable to connect. I have try it on different computer-C it is saying the same thing. What should I do?
I have installed the EPSON driver in computer-B (hoping it would work)but still after the install the driver (download from computer-A) by itself then it says unable to connect the printer.
I have setup all the computers with the group name of WORKFROUP. You may wonder why I don't use the Windows 7 Homegroup, it is because I have some XP computers need to use that computer-A's printer. how to make the printer sharing works. [URL]
I have a working local Laserprinter under 64bit Win7. Through LAN another Win7 computer is connected. The remote computer can access local shared folders successfully. But it cannot access the local laser printer (connected through USB). How can I share the local printer to other computers in LAN? Do I have to define local printers explicitely as shared/accessible? Or are they automatically accessible (provided that the local user account and passwort is known at the remote computer? Do I have to install the printer driver in general at the remote computer as well or is the printer driver on the local computer enough?
i switched my bosses computer to Windows 7 here at work, all went fine.. we are using win98 under VMWARE 6.5 for our windows 98.. everything works great, except i cannot get it to access the printer on the Windows 7 machine, it sees it but always gets a access denied error, i have turned off password sharing.. and any of the xp/Windows 7 machines see it fine.. just the damn 98.. and i can't not use 98 cause of our POS software...
I've got a printer connected by USB to a desktop running Vista and hardwired to a WiFi router and I've got a Nokia booklet running Windows 7 Starter and using the WiFi. I have tried to get the two computers to connect with each other, but only the desktop can get into the booklet. I cannot get the booklet to get into the desktop. It seems that because I only have Win Starter 7, I cannot form a home group. I need the full featured Win 7 to do that. Is that correct? I really would like to use the printer on the booklet, but even though it seems to send the document to the printer queue on the desktop, nothing prints. I suspect it's the same issue as I mentioned, but at least it's getting something into the desktop. When I try to print and then look at the document's properties, it says the size of the document but always says pages to print.
32 bit system has photosmart 7760 usb attached.64 bit win 7 will network to 32 bit system and see printer but when you try to add, it looks for drivers and goes to windows update and looks but can not find because hp does not offer a win 7 driver for this . it states driver is part of os system comes back states not able to find driver?
how do i share a network printer from my Windows 7, 64 pc to one running vista i have tried all the sharing settings, but when i upgraded my PC to win 7, my second pc running vista won't print anymore printer: hp officejet pro 8500ag
I am able to connect from XP to a network share at my workplace by giving login/password. However, when I try to connect from Windows 7 i get the error: "specified authentication package is unknown"
However, I am able to connect to another shares. From XP no one is having any problems in connecting to this share at all. Have googled but to no avail. Found one suggestion to add 'authentication packages' key to registry but it was already present in my Win 7 and with the correct value.
Any help would be appreciated as I am at my wits end with this issue. Win 7 is working flawlessly otherwise. Much much better than XP. Vista was pretty much unusable on my laptop (HP TC 4400 tabletpc)
I'm so tired of this error that I could I throw my computer down the window. So the thing is I'm trying to share my mobile connection from my computer to my xbox (which has worked before without any problems) but now when I click on properties on my mobile connection on the share tab to check the "allow sharing" box this error: 0x80004005 along with "undefined error" comes up. How I could want to share mobile connection to the xbox when it's only going to lag, it will not, it works like a dream when it chooses to work..
I bought a new wireless Epson Workforce 545 printer. It has worked without flow for quite some time (nearly a year). Now all the suddenly it wont print.I have it as a shared printer. There are three other family members on the network and all three others print without any problem. Mine worked fine and now wont print. It goes through the motions and then times out. All it says is "printer error".
I have 2 computers on my home network. My desktop is running Windows 7 ultimate 32 bit and I have a kodak 5500 Aio connected to it. I also have a laptop that's running windows 7 home premium 64 bit that connects wireless. I was able to print until today and now I can't print from the laptop. I can see the printer in the add printer window but comes up with cannot connect with error of 0x0000000d
My printer keeps giving me the error message "A printer error has occurred, turn off the printer, then press on button to turn on. See your documentation" I have unistalled it held down the on button and cancel button at the same time to print a test paper, but still can't get anything to print.
i have install the win 7 64bits in the server, but my others pc with xp 32bits, my hp 3745 is automatic install with win 7 64bits, but I can not share the network for computers with xp 32bit, when I install says missing driver, can someone tell me how correcting this?
I went to the HP site to download the latest driver for my printer model, but on this page it says:HP PSC 1200 All-in-One Printer series - HP Printer Install Wizard for Windows 7 - HP Business Support Center "The drivers for your HP product are already included in the new Windows 7 operating system! You do not need to download drivers to use the product.Simply connect the printer to your computer with a USB cable, and Windows Update automatically installs the driver for your product."
When I start up my Windows 7 32 bit Home edition I receive an error in the event log.I had a 840c printer on my system. I replaced this with psc750 and uninstalled the 840c.However when I boot my Windows 7 machine the event log show the following error:-