When I attach any USB storage devices to my laptop (eg memory sticks, 1TB Seagate standalone drive, internal drive mounted in external usb chassis) I get a Code 32 error in the properties panel saying the drivers are disabled. All the devices show the following drivers:
These all look like pretty standard drivers. A possible item of interest is that I have been pretty aggressive about turning services to manual or disabled at boot to get my computer to run faster. Which driver is disabled and how do I enable it or otherwise fix this?
I upgraded to windows 7 over vista the other day and I just noticed a problem. I have the Intel Turbo Memory Readyboost and it used to work perfectly with Vista, but I just opened the window where you enable/disable it, and it said it was disabled, so i enabled it and it asked me to restart my computer so I did, and when I restarted I went back just to make sure it was enabled and it is still disabled. I tried it again and same thing happened... anyone know why or how to fix it?
my brother used a mac lap top and i think he formated it to beable to copy movies to my terabite. it now does not recognise it on computer ore dvd which it did before
I have two external USB drives, one independently-powered, one USB-cable-powered, both with NTFS and linux ext2 and ext3 partitions. Under Windows 7 both drives show up under Device Manager with the Property: "A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)".
None of their partitions show up in "My Computer". (BTW, the partitions are all good and they are all usable from the linux side of my dualboot system.) I probably disabled the guilty service(s) myself. To get Windows 7 to work reasonably, I disabled all the services I thought I wouldn't need.
Which service(s) do I have to look at to get the disks to work again? The powered disk is a Hitachi HTS545016B9A300 and the unpowered one is the internal disk from my previous laptop, a "Seagate Desktop USB Device," both as reported by the Device Manager.
I have been unable to connect to anything on my wired network, for about the last week. I don't remember making any changes however, I just became unable to connect.I having done a little troubleshooting.1. I can connect to the shares of my Windows Home Server if I use the IP address. The name does not resolve.2. Flushed DNS and restarting DNS server. Flushing DNS works on one client, to allow browsing by the name & restarting DNS works on the other. However neither works after a restart.3. Only my Wifi clients are experiencing this issue. My wired clients, desktops, PS3, Xbox 360, and Boxee can connect perfectly.This issue is not limited to my server. I can't connect to shares on my desktop, nor print to my wired printer.Some network background:I have DSL through CenturyLink and have a Linksys E2000 router.
I have a Toshiba Satellite laptop. I did a clean install of windows 7 Ultimate from windows xp. now my device manger says "other devices- video controller" needs a driver i have looked everywhere for this driver but im not sure what the video controller even is so here i am looking for help. I have been working on this for 4 days now. so here are the specs of my laptop. I probably have given to much info on my laptop,
I tried to install driver for samsung laser printer 331 and on desktop w/win 7 home premium. Message says cannot locate printer & in devices & printer its shown in unspecified. Checked printer by installing on laptop with xp worked fine.
I have a veho VFS-004 neg & Slide scanner, I have loaded all the software as instructed and although the device shows up in "Printers & Devices" it is not recognized through the program. When I look at the properties in "devices" there is no driver installed and trouble shooting will not fix the problem.
Tech Support Guy System Info Utility version 1.0.0.1OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, 32 bitProcessor: Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz, x64 Family 6 Model 15 Stepping 13Processor Count: 2RAM: 3581 MbGraphics Card: ATI Mobility Radeon HD 3650, 256 MbHard Drives: C: Total - 294853 MB, Free -237438 MB; D: Total - 10239 MB, Free - 5380 MB;Motherboard: Dell Inc., 0YP950, , .J6NHWG1.CN4864386C1101.Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and EnabledI have a Lexar Twist and Turn memory stick that will not open or load to Windows7 Ultimate. It tries to load driver but will not load successfully
how to convert a shared video memory into dedicated video memory and system video memory? me and my friend have the same specs computers but the same game runs slow in my computer but it runs smoothly in his computer?
i am having a problem with my memory getting tied up / used up and not being able to access it again until i reboot.
machine: dell xps studio 8100 os: win 7, processor: i7 2.8 ram: 16gb (max it will take) video: ati radeon 5700 (running 3 monitors)
versions: as far as i know i am running current versions of everything, including video drivers, flash, chrome, etc. (i've tried running chrome with both the build in version of flash and the system version -haven't seen a difference)
browser: i nearly exclusively run chrome / canary with auto-updates so am at the latest builds.what seems to cause me to use up / run out of memory is after i play videos (Internet, netflix, etc.), the memory seems to get used, but is not returned to the system, even if the browser is closed and re-opened.right now for example things are working fine; i rebooted my system a couple hours ago (but have not played any videos). i have adobe lightroom running, picasa, chrome and canary (currently 4 web browser windows open with 52 tabs open). task manager currently shows me using 8.20gb of ram, that seems pretty reasonable to me.
normally my system will keep running properly (if a program is closed, memory is freed up) right up until i start to play any videos (Internet, netflix, etc.) then it will start using up more memory. (of course i expect it to use more memory during playback) however, even if i restart the browser, the memory does not get freed back up. for example, just prior to the reboot, with everything closed, i was using right around 8gb of ram. once i rebooted, i was using 1.something gb of ram prior to opening any programs.however, once i start playing some videos, i never seem to be able to get my ram freed back up again unless i reboot the whole system. this is not just a problem with how much memory the system shows as being available, i frequently actually run out of memory. (task manager will show me as using around 15gb and then everything starts swapping out like crazy).
I find that if I run chkdsk and watch the memory usage in task manager it jumps by about 50MB every 2 seconds or so until it either finishes or hits around 3.2GB at which point my physical memory shows 99% used (I'm running 4GB), and the system of course slows to a crawl.f you just run a quick chkdsk on your boot drive you may not notice it, but try running something longer like chkdsk /r on a flash drive or chkdsk /f on a bigger internal drive (but not your OS drive as this would require a reboot) and watch the memory usage climb. I have duplicated this on both systems I have running Windows 7. My XP machine (checking the same USB flash drive) uses a much more normal amount of memory for chkdsk (20 - 30 MB).
Memory Usage Goes Up Gradually (Memory Leak)When I starting the Windows (in the first few hours) everything is normal But after 1 day or 2 (sooner or later) the amount of available memory gradually goes down and the physical memory usage increasing. This increasing, continues until the memory usage reaches near the 88% and at that point , there isn't any memory available to operate any software . Also when memory reaches that point, I can't access any drive in the HDD; because everytime I want to open any folder, the following error appears :c: is not accessible.Insufficient system resources exist to complete the requested service At this point, I even can't shutdown or restart Windows normally; I must restart windows manually by pressing the restart button.after restart, everything goes to normal again; but this problem appears again and again ...
my system : ------------------------ OS : Windows 7 x86 Cpu : Intel P4 3.0GH Vga : nVidia 6600 MB : Gigabyte GA-8I915G Duo PSU : Corsair 750W RAM : 2GB DDR-400 Transcend (I have these memories for 2 years) Physical Memory: 2000 mb Paging File: 2000 mb Virtual Memory: 6000 mb
0- using some optimizing and freeing softwares like (Memory Booster Gold - RAM Saver Pro - CleanMem)
1- Scanning my computer with antivirus and antispywares
2- Changing antivirus software
3- Updating windows with all updates available via Windows Update
4- Updating drivers of all hardwares
5- Downloading and installing the following hotfixes that are related to memory leak : The memory of the nonpaged pool may leak when you enable IPsec on a computer that is running Windows Server 2008 R2 or Windows 7 A memory leak issue occurs in the Windows Management Instrumentation service on a computer that is running Windows Server 2008 R2 or Windows 7 FIX: A memory leak may occur when you use the Microsoft ActiveX Data Objects Library in Windows Vista, in Windows 7, in Windows Server 2008, or in Windows Server 2008 R2 A memory leak occurs when an ADO Recordset object calls the UpdateBatch method A nonpaged pool memory leak occurs when you use a WFP callout driver in Windows Vista, Windows 7, Windows Server 2008, or in Windows Server 2008 R2
I just built a new computer and started with 8GB of memory. A few weeks down the line I purchased another set of the same memory because it was on such a good deal and had great reviews (newegg). It also was working well for me, so I figured maybe more could be better.
I haven't noticed any decrease/increase in system performance except Alt-Tabbing has recently got slower. Also, Windows 7 was sitting tight on 1.3gb to 2gb of memory usage prior to the extra 8 (now 16) being added. Even when gaming, it went up to like 3gb. Now that I've added the extra it's going up to 4.5gb or better. Also, is it possible to speed up my alt-tabbing? It seems to have a good 3-4 second pause in it instead of being immediate like it was.
Computer specs: Windows 7 HP 64-bit gSkill 16gb 1866 memory (BIOS shows it at 1866, too) Intel i5-2500k Sandy Bridge (OC'd 4.6 with factory Overclock presets) ASRock z68 Extreme4 mobo
I recently bought 2x1GB Ram Sticks for a Dell DimensionE510It has a Pentium4 2.80Gh Processorand factory 1 GB RAMIt's currently running Windows 7 x64hen I put the new RAM sticks in the system recognizes the new memory says it has 3.0 GB of ram and runs until I start actually using to new memory, as in start running more programs simultaneously and it crashes and I get two BSOD*. As far as I know the sticks match the motherboard, as in that's what I was told.*"Memory Management" and "PFN List Corrupt"As far as I understand it is a driver issue, but I honestly am not sure.
To start, I have Windows 7, on Sony Vaio laptop. I have been working on the issues with the malware removal team, but now machine looks clean, I am still having issues. When starting the computer and going to the task manager, I can watch explorer.exe start at about 18K memory usage and then grow constantly until it is running with almost all of the computer's physical memory after about seven min. I cannot get the context menu to show up after a few min by right clicking on anything. I had been experiencing "freezing" while playing Eden Eternal (an online role playing game) before that, which made me consider malware and seek help here at BleepingComputer. The freezing has ended, last time I played on that machine at least, but now there seems to be some issue with the explorer.exe taking all of the memory. I haven't been using the machine since I don't trust that there's not something running in the background that shouldn't be. In resource monitor there were "connections" that had "-" for both the name and the PID, but I don't know if that was the malware of if that's normal somehow? Issue with explorer.exe seems to be limited to only one user account, and not the other one. That is to say that if I log on one of the other accounts explorer.exe behaves normally, as far as memory usage.
After having re-set my Internet settings (as part of trying to resolve an issue with not being able to load pictures on Facebook), now a message comes up every time I open a new tab in IE9, saying 'Add-ons currently disabled'.
Everytime I open my computer, it is always installing devices. I usually have problem in installing my sound(sometimes my computer detects it as realtek sometimes its high definition audio device) and LAN(realtek RTL8139/810x Family Fast Ethernet NIC #366). Usually repairing my sound device works. (about 70%) How can I solve it permanently? My computer says my LAN is not working but I can still access the internet. What seems to be the problem?
When I go to my computer it has a 'BD-ROM Drive' but my DVD-ROM/CD-ROM drive does not appear. I tried putting a CD but nothing happens.
Under device manager I have a CD-ROM drive enabled but below that is 'PBDS DVD+-RW DS-8W1P ATA Device which when I click says this device is disabled (Code 22). I try to click 'enable device' but when I go through the troubleshooting wizard is says windows cannot enable the device.
Can anybody help me? I just want to upgrade my Windows 7 Beta 7022 to 7048 but can't do it without my CD-Rom drive.
I want to get his fixed but if I cant would I be able to upgrade Windows 7 from Vista (I'm running a dual-boot) or will that write over my Vista partition?
I have windows 7 64 bit and also running a ssd. Just a few days ago I've started to have an issue where after my computer is running for a couple hours all processes continually increase the amount of memory they are using until I get an out of memory error. Here is a pic of it around 75%. I have 8 gigs of ram (kingston) that before this never went above 4gigs of use, so not sure what is causing this suddenly.
