I have a veho VFS-004 neg & Slide scanner, I have loaded all the software as instructed and although the device shows up in "Printers & Devices" it is not recognized through the program. When I look at the properties in "devices" there is no driver installed and trouble shooting will not fix the problem.
View 2 RepliesI have a computer on which the usb devices stop working/receiving power once windows has loaded (they work up untill windows finishes loading). I installed windows on a different disk everything else remained the same, now the mouse and kb work. Is there a known fix for this? If not is it possible somehow to transfer the user settings from one disk to another, so i get the same settings on the new drive perhaps (mind you, no mouse or kb support on one of those windows)?I have tried a lot of windows disk fix things, none of them have any effect, very strange, have never seen this before. Usually i get pretty much everything fixed using google, but this one.
View 6 Replies View RelatedI just loaded a new copy of windows 7 home 64. Now my computer doesn't recognize my printer or Ethernet cable.
View 6 Replies View RelatedOut of the blue my win 7 Ultimate SP1 will not recognize CERTAIN USB devices plugged in the rear ports (I have 2 in the front, 4 in the rear). I get the "device not recognized " pop up. The strange thing is, all the the devices that I plug into the front 2 USB ports are recognized and work. I know the rear ports are functioning because when i plug in my scanner, or my flash drive, they work. However when i plug in my HP printer or my logitech mouse (which both work in the front ports), it says they are unrecognized.I have scoured the forums and have tried numerous things; unplugging power, uninstalling drivers, taking out MB battery, resetting CMOS, etc. All with no luck.I really cant imagine how my mouse can work in the front usb port but will not work in the rear one, in which my flash drive & USB-powered scanner work.
View 9 Replies View RelatedI just installed a new PCI USB 2.0 card into my machine. I have a Line 6 Toneport UX8 that connects to the PC by USB as the interface for microphones and instruments. Because of the high volume of data coming down the pipe from this external interface it is pretty much a 'mandatory recommendation' to use a dedicated USB controller in a PCI slot.
Anyway, I installed the PCI card just fine but when I plug in the UX8 to it, Windows 7 reports 'USB device not recognized'. It is recognized if I plug it into one of the motherboard's USB slots though. I need to use this PCI card, otherwise the recording quality is useless. I know other people have this external interface and run it into a dedicated PCI/USB controller with great results. So I am hoping someone here can suggest what I can do to get Windows 7 to recognize the card and the USB devices plugged into it.
I'm hoping I don't have to reinstall the OS since it will be a pain to have to reinstall again when the commercial licenses come out in less than a month (I'm assuming I'll have to reinstall since I will be using an upgrade from my XP Pro that I have not used since trying out this Windows 7 RC).
Epson scanner GT-1500 stopped working with some programs. Wiped all drivers and reinstalled latest version of Epson software. Adobe and some Espon programs not seeing scanner. Scanner works with Paint and Omnipage, so I know it's not the scanner. Worked with MS and Epson and of course they point fingers at the other. how to get the scanner working with all programs again.
View 1 Replies View RelatedPurchased a brand new Asus USB-BT211 bluetooth dongle with the express goal of connecting a wiimote to my new computer. the machine runs Windows 7 x64, the drivers for the dongle install without a problem, and the bluetooth searching mode on the "add a device" screen appears to be running without a hitch.
when i place the wiimote into sync mode (holding down the red button), it never appears to be visible to the computer, and doesn't show up on the add a device screen. When I attempt this procedure with either of my other two laptop computers, (running Windxows Vista x86) using the same dongle, the wiimote syncs without a problem and can be used with other utilities such as glovePIE and JoyToKey and Dolphin.
So, tell me, Why is it that Windows 7 refuses to see the wiimote when i try to make the connection?
i have a problem while installing Windows 7 (new installation).After booting from CD rom i see a loading bar 2 times (1st runs fast, second takes a while), saying "windows is loading files". then the screen switches to "starting windows" and freezes.. i've waited over 30 min., but nothing happens .sometimes i get a blue screen, saying "BAD_SYSTEM_CONFIG_INFO", with error code "STOP 0x00000074"when starting in safe mode, it always get stuck while loading disk.sysMy configuration:[CODE]
View 9 Replies View RelatedI think one of my hdds is failing and tried to run Seagate tools for Dos that I downloaded from Seagate's site and burned to a cd.The cd loads, but says "no devices recognized"I called Seagate and they said to change to Ide in the BIOS.In researching online, many people are saying that by doing this, you will have to do a complete reinstall of Windows 7.
View 2 Replies View RelatedI have been unable to connect to anything on my wired network, for about the last week. I don't remember making any changes however, I just became unable to connect.I having done a little troubleshooting.1. I can connect to the shares of my Windows Home Server if I use the IP address. The name does not resolve.2. Flushed DNS and restarting DNS server. Flushing DNS works on one client, to allow browsing by the name & restarting DNS works on the other. However neither works after a restart.3. Only my Wifi clients are experiencing this issue. My wired clients, desktops, PS3, Xbox 360, and Boxee can connect perfectly.This issue is not limited to my server. I can't connect to shares on my desktop, nor print to my wired printer.Some network background:I have DSL through CenturyLink and have a Linksys E2000 router.
View 2 Replies View RelatedMy iomega ext.drive , model LPHD-UPC suddenly stopped recognized in Windows 7
View 4 Replies View RelatedWhen I attach any USB storage devices to my laptop (eg memory sticks, 1TB Seagate standalone drive, internal drive mounted in external usb chassis) I get a Code 32 error in the properties panel saying the drivers are disabled. All the devices show the following drivers:
c:WindowsSystem32DRIVERSApsx64.sys
c:WindowsSystem32DRIVERSdisk.sys
c:WindowsSystem32DRIVERSDzHDD64.sys
c:WindowsSystem32DRIVERSpartmgr.sys
c:WindowsSystem32DRIVERSsnapman.sys
These all look like pretty standard drivers. A possible item of interest is that I have been pretty aggressive about turning services to manual or disabled at boot to get my computer to run faster. Which driver is disabled and how do I enable it or otherwise fix this?
I have a Toshiba Satellite laptop. I did a clean install of windows 7 Ultimate from windows xp. now my device manger says "other devices- video controller" needs a driver i have looked everywhere for this driver but im not sure what the video controller even is so here i am looking for help. I have been working on this for 4 days now. so here are the specs of my laptop. I probably have given to much info on my laptop,
View 9 Replies View RelatedShort tutorial for getting the correct device driver.
View 0 Replies View Relatedi want to update the driver for my Bluetooth devices?
View 1 Replies View RelatedI tried to install driver for samsung laser printer 331 and on desktop w/win 7 home premium. Message says cannot locate printer & in devices & printer its shown in unspecified. Checked printer by installing on laptop with xp worked fine.
View 9 Replies View RelatedDriver for veugo, brisa, 640u, scanner,64 bit,windows 7
View 2 Replies View Relatedi need drivers for other devices.
View 5 Replies View Relatedso this question might have been answered for some but i've been reading the threads and have tried other's working solutions and they have not worked for me.I recently moved my whole system to a new case ( a full tower vs mid) and everything was peachy until i notice no internet. at first i think ok i'll just re-download the lan driver via MSI cd. I put it in and all the drivers are colored and clickable except the lan one, crap, not sure why.. but i try downloading the driver via another computer and put it on external hard drive and install it from there. well it worked until a pop up comes up that says "The Realtek Network Controller was not found. If Deep Sleep Mode is enable Please Plug the Cable" now of course the cable was plugged in so i was confused.. just to make sure i tried rebooting a few times, taking out the ram to reset motherboard settings. after that failed i checked my programs and settings and the driver was installed but under device manager.. nothing for networking at all. so i guess my question is, Is my windows failing on me cuz it can't recognize the lan or is my motherboard crapping out on me?
[code]...
I have a Zotac 570 gtx connected via HDMI cable to my Asus VE258 LED monitor.I've had this video card and monitor setup working before with the exact cable, card and monitor.Something changed in my system where the monitor is no longer recognized for what it is. When i go into my Nvidia control panel under change resolution 1.Digital Display, 2. DVI-PC Display - Resolution 1080p 59 Hz. There is no DVI cable plugged into the computer and the monitor is set on HDMI input. When i go to my Audio playback devices, the HDMI connection does not show up at all, even as disabled or disconnected.When i go to play a game (Diablo 3, Skyrim, Farcry2) The game either doesn't open (skyrim) giving me the error that resolution is not recognized (but then does not give me any resolutions to choose from in the options menu) or will play (Diablo 3) but is stuck on extremely low resolutions with only 2 options.
Here's what i've done. Contacted Zotac and had them send me the most recent drivers for the video card. Uninstalled originals and re-installed the new ones. Contacted Asus (they say its not the monitor as long as its set on HDMI input) I am unable to find a driver that will make my computer (Windows 7) recognize the monitor for what it is. Zotac failed after their attempt with the driver and told me to RMA the card. So i did... i waited a month.
BenQ Scanner drivers for Acer 6698 model scanner for Windows 7 or Ubuntu 12.04 (Linux). Works fine in Windows XP Pro, but not in newer versions or past Ubuntu 9.x
View 2 Replies View Relatedcould not find driver for scanner GENX.
View 4 Replies View RelatedI need a HP Driver 5200C scanner for Windows 7. There is not one available on the HP web site, the latest is for XP.
View 2 Replies View RelatedSo I have a fairly old scanner (Canon CanoScan 3000f) that doesn't have any 64 bit drivers.So I tried a program called VueScan but it doesn't work with my scanner, and neither does another thing called SANE (Scanner Access Now Easy).Pestering Canon for a 64 bit driver failed,So anyway, the only solution I can think of is installing a virtual machine with 32 bit, but it's too troublesome to have to start up a virtual machine just to scan something, and then go through all the trouble of transferring the file from the virtual PC's hard disk to the host HDD.Is there any easier solution? Maybe a universal scanner driver for 64 bit Windows?
View 5 Replies View RelatedWhat is the best driver scanner software?
View 1 Replies View RelatedAcer flatbed scanner 22 for windows 7 of the model 6678
View 1 Replies View Relateddoes anybody know where i can find a driver for the Diamond 100Plus scanner which will work under Windows 7 ?
Answer:-
Have you tried the Vista driver yet?
where can I find drivers for this project
View 4 Replies View Relatedis there a driver for acer scanner model 6678-BMZ that can work with WIN &
View 1 Replies View RelatedWhere can I find a driver for my Slim USB Scanner on a Windows 7 installation with 64 bit cpu?
View 1 Replies View RelatedI´ve had some issue concerning my hardware drivers and today I´ve been testing out some of the programs that´s out there. Driver Max, Drive Checker, Uniblue Drive scanner and Drive Robot. They are all free to download and use for scanning, but when you want to use their driver updater you will have to buy a premium account.
The problem I see is that the scanning gives different results on different programs. Uniblue drive scanner that is approved by Microsoft said that all my drivers are up to date, so did Windows in Device manager. The rest said that 6-10 drives were outdated and when I downloaded one of the the recommended driver versions, manually, the install program said that I already had a newer version of the driver installed.
So what I´m asking if someone have a premium account and had a good result? I don´t want to pay $29 and get nothing out of it.