Epson scanner GT-1500 stopped working with some programs. Wiped all drivers and reinstalled latest version of Epson software. Adobe and some Espon programs not seeing scanner. Scanner works with Paint and Omnipage, so I know it's not the scanner. Worked with MS and Epson and of course they point fingers at the other. how to get the scanner working with all programs again.
View 1 RepliesI have a veho VFS-004 neg & Slide scanner, I have loaded all the software as instructed and although the device shows up in "Printers & Devices" it is not recognized through the program. When I look at the properties in "devices" there is no driver installed and trouble shooting will not fix the problem.
View 2 Replies View RelatedI have a Zotac 570 gtx connected via HDMI cable to my Asus VE258 LED monitor.I've had this video card and monitor setup working before with the exact cable, card and monitor.Something changed in my system where the monitor is no longer recognized for what it is. When i go into my Nvidia control panel under change resolution 1.Digital Display, 2. DVI-PC Display - Resolution 1080p 59 Hz. There is no DVI cable plugged into the computer and the monitor is set on HDMI input. When i go to my Audio playback devices, the HDMI connection does not show up at all, even as disabled or disconnected.When i go to play a game (Diablo 3, Skyrim, Farcry2) The game either doesn't open (skyrim) giving me the error that resolution is not recognized (but then does not give me any resolutions to choose from in the options menu) or will play (Diablo 3) but is stuck on extremely low resolutions with only 2 options.
Here's what i've done. Contacted Zotac and had them send me the most recent drivers for the video card. Uninstalled originals and re-installed the new ones. Contacted Asus (they say its not the monitor as long as its set on HDMI input) I am unable to find a driver that will make my computer (Windows 7) recognize the monitor for what it is. Zotac failed after their attempt with the driver and told me to RMA the card. So i did... i waited a month.
BenQ Scanner drivers for Acer 6698 model scanner for Windows 7 or Ubuntu 12.04 (Linux). Works fine in Windows XP Pro, but not in newer versions or past Ubuntu 9.x
View 2 Replies View RelatedNo matter how many times I launch Skype or iTunes, they just won't get added to the Start Menu's Recent Programs list.
View 9 Replies View RelatedSo over the past few days it seems that I have lost control of my C drive and all of its contents.I can no longer properly access it, and everything opens in "Read-Only". I can no longer install programs or modify existing programs.According to the security permissions, I have none. Nor can I change my permissions because in order to change them I need access to the C drive, which I don't have.I have tried creating other users and putting them in the admin group, etc. but nothing is working.
View 2 Replies View RelatedToday I decided to install some stuff on my computer as it was out of date..I installed Java, Flash player and adobe reader X but when I go to add/remove they are not showing up in that section?
View 9 Replies View RelatedEvery time I start up normally into Win7 everything is fine for a couple of minutes. I'll open a few programs, then after a few minutes of them running they'll hang and enter the 'not responding' mode. (firefox, steam, IE). If I don't already have task manager running the system will basically be unresponsive and the only thing I can do is reboot manually. If I have task manager running I can sometimes end a process or two but some will remain open & unresponsive. Any programs that are working (including task manager) disappear when I minimize them and no programs appear on the task bar, (though they can be retrieved with alt+tab).
McAfee also has 'real time scanning' permanently disabled.
This is all very strange as there was nothing wrong four days ago when I was away, and the symptoms occured within 2-3 minutes of booting up this evening. The system runs in safe mode.
I have just bought a new acer aspier 5750z-4830 intel core b940 processor 4gb ddr3 memory 500 gb hdd 3 days ago and I am unable to install any new programs.I have tried to download meny sotwer not at the same time but the results are horrable.google chrome: 7 hours and never downloads. yahoo mesenger: connection is always lost and retrys never work. when i click cancle it says that it maybe my firewall but even when i allow the progrom through it won't work. so i turned if off for a little while still nothing. java: my laptop dose not come with java so i tried instlling it...121 hours to install this is rediclious.The download speed may not be so good right now beacuse we where hit by a storm 3 days ago however i have to ability to downlod but not the ability to install which i think is a bit weird
View 3 Replies View RelatedThis fault is occur a after using Iobit Uninstaller. I closed this program before uninstrallation process of selected programs completed. After this only 5 programs are showing. I restore syatem by Iobit Uninstaller. but no any change.I checked registry (HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionUninstall). There is only 5 keys. How do I recover these registry keys.
View 3 Replies View RelatedI downloaded Adobe Shockwave Player which is needed to view a file (.swf), and it appears in the control panel as an installed program. However, it does not appear as a default program when I am trying to use the "associate a file type or protocal with a specific program" even when I press the browse list. The program also does not appear when I "right click" the file itself and use the open command. The program also does not appear in the list of programs on the "All Progams: list when clicking the windows icon. So, can someone tell me how to get programs onto the default list....(Please, I have seen a number of threads that talk about how to "set" the default program which I am well aware of...I need to know how to get a program to be recognized and incoroporated as part of the list).
View 6 Replies View Relatedfirst when I try to open microsoft office starter 2010 a box appears...click to run configuration error....so I went to programs and features to repair it and many of my installed and pre-downloaded programs aren't listed.. they are in the start menu and they work but they're just gone. Microsoft office and all related programs and features are among them....I had about 60 or 70 items before and now 23...I've tried system restore and nothing...
View 2 Replies View Relatedmany of my pc programs are not listed in programs and features.SO what can i do.Please help me!
View 1 Replies View Relatedmy logitech m205 mouse usb isnt working it says that error "usb is malfunctioned and windows cant recognize it". i tried lots of things on off reconnect i even took out the battery.
View 11 Replies View RelatedI have a D-Link USB hub (DUB-H4) and it no longer shows up in windows 7. If I plug a flash drive directly into a usb port on top of my tower it shows up fine. When I plug it into my hub nothing.I tried unplugging the hub from the computer and plugged it back in to see if it would reinstall itself but windows does not detect it.
View 2 Replies View RelatedIt worked fine before. It is the one in the actual computer - not a hub.
View 2 Replies View RelatedI decided to get rid of antivirus and just turn User Account Control on (I had it off)but the problem is when I turn this on, the computer cannot recognize any usb. Nothing shows up on disk management either. And when I turn it back off it works again.
View 8 Replies View Related1G flash drive cannot be accessed as you might encounter if it were write protected -- tested all three USB ports with other flash drives with issue -- of course only the one that I most need -- read historical posts but not successful -- may try it on another computer that has better security in case it might be a virus issue -- did try the diskpart test and it does recognize it but with 0 storage on it
View 2 Replies View RelatedRecently my computer was taking an age to boot... repeatedly had to press start. Upon checking the internet I found that a probable cause was linked to power supply....not spinning HD fast enough to boot so I uprated to 500W... and as the computer leads were all out I took the opportunity of putting in an extra 2 Gb RAM (New and checked with Crucial as being compatible)Total 4Gb RAM Install went well.... and boot up took a fraction of the time! The extra RAM was recognised Total 4Gb, initially the Windows theme played.... then...... unable to start - blue screen re Graphics card - started in safe mode... download drivers.... Then graphics OK.... but No Audio - download new driver for Gigabyte MB..... checked Graphics card in Device Manager - Not working Code 32! I thought there must be an issue with the graphics card so I purchased and installed another. I also removed the extra 2Gb of RAM. I performed a clean install of Windows 7.... Graphics card working and drivers downloaded.... Brilliant ! Then I re installed the 2Gb RAM.... switched on nothing but a long beeeeeep foloowed by another.... followed by another .... I turned off the power, removed the 2Gb RAM and the computer booted fine! So I can deduce that the graphics card works OK (the old one probably did too!) and the 4Gb RAM is OK.... just that the 4Gb of RAM and the Graphics card do not like to work together?
View 3 Replies View RelatedI have an ASUS laptop computer and the DVD CD-ROM is not recognized. It has a Code 32 error. The model number is K72F.
View 1 Replies View RelatedMy Computer does not recognize my dvd drive.When I named it and formatted it the formatting went not responding.So I opened Task master and closed it and selected end now .After taking the dvd out and inserting it after a while it wont recognize my dvd but recognizes others .I use dell Laptop
View 1 Replies View RelatedWhen I start up I recv. a msg stating that I am not logged on as an administrator. I then have to switch users at the start menu and then no more pop up and I do have administrative capabilities.I am not that computer savy but I dont think this is normal. Other than the guest account(which is off), I am the only user. I have been through the control panel inside out and upside down. I am listed as the administrator for sure, in a group, not a domain. I also turned off the password requirement.
View 1 Replies View RelatedThere are times when it is not being recognized by Windows 7(pro). It has three interface options (fire wire, esata, and USB). I have tried all three at one time or another, finally settling on the eSATA interface. When it IS recognized, it runs smoothly, with no hiccups. But when I try to shut down the PC, sometimes it hangs up on the shut down screen for a long time (more than 15 minutes at times) until I actually press the on/off button on the My Book. When I do this, my PC immediately shuts down, but then, if I start up my PC, Windows does not see it again. I then have to power the My Book back on, then power up the PC and hope that it is recognized again. It�s not a big issue, because it is not frequently used, except for storing back-ups. It�s just something that is a nuisance. I�m not even sure that it is a Windows problem, because sometimes it is not detected in BIOS. why it is intermittently being detected and why it is hindering the shut-down process?
View 2 Replies View RelatedI noticed recently that for some reason,my USB ports aren't being identified as 2.0 ports, but I know they are. My computer is an ASUS CG5270, Specs: Core 2 Quad @ 2.4 GHZ,8 gigs ram, 750GB hard drive. I tried going into the device manager and uninstalling everything under "USB", and then restarting and replugging everything in..no luck. I found some Fix for Windows 7 SP1...no luck. Whenever I go into the Device Manager, there are two ports ( I think they're ports) listed as "Enhanced", with the rest as "Universal". I keep getting errors when I plug in my external HD that "this device could perform faster". (I also get another message telling me that the drive needs to be formatted, but it works anyway). I also get a "this device could perform faster" with my webcam, as well...
View 9 Replies View RelatedI'm having a bit of a problem with my DVD drives not being recognized. In a prior post, one of the fellows on this stream (Randy) solved the problem I'm having by suggesting that I edit the Upper and Lower Filters in the Registry. Unfortunately, I've lost this information. This time, I'll put it in a Jump Drive and lock in a safe!
View 2 Replies View Relatedall of a sudden my 2 cd-rw drives are recognized as cd-rom.
no new programs have been installed. i have win 7, 64 bit
I have a Sandisk Cruzer Titainium 4MB USB drive. It is recognized as a 'CD drive' and I can't do anything with it at all.
View 2 Replies View RelatedI have "upgraded" my Dell XPS M1730 laptop from XP Pro to Windows 7, but my DVD CD will no longer recognise Audio Discs or DVDs. It will read the Windows 7 installation DVD so there is no mechanical problem with it. I have updated all drivers and the installed driver is listed as current. I have also installed the latest Firmware.
View 6 Replies View RelatedSo I use a NES usb retropad that I connect to my laptop. When I go to the control panel I can see that it shows up but it isn't set as game controller it just says undefined for category. I know the controller works and all the drivers are up to date so I can't figure out why it wont work in any of the programs I try to using in, including any emulators or joy2key. When I try to use it in joytokey it says no controller detected but I know it shows up in the control panel.
View 3 Replies View RelatedThis is a 1GB thumb drive and its been working just fine. Put some files on it with this machine with the intent of transferring to another machine (which did not come to pass).
View 9 Replies View Relatedwindows 7 does not recognize an external HD; I do not see it in "computers" but in "devices and printers". What should I do
View 6 Replies View Related