Everytime I open my computer, it is always installing devices. I usually have problem in installing my sound(sometimes my computer detects it as realtek sometimes its high definition audio device) and LAN(realtek RTL8139/810x Family Fast Ethernet NIC #366). Usually repairing my sound device works. (about 70%) How can I solve it permanently? My computer says my LAN is not working but I can still access the internet. What seems to be the problem?
View 2 RepliesEvery time I start my computer my internal card reader has to be disabled and then enabled in device manager before it will work properly. I put a SD card in it and auto open doesn't work. I check My Computer and it shows that it's there but when I double click it to open I get a message saying to please insert the SD card. Once I go to device manager and disable and enable it orks fine. I tried different cards but it makes no difference. I installed a different card reader but the new one does the same thing.I tried doing a repair install but it completes and says the upgrade was not successful?I am running Windows & Pro 64-bit. This is a Renesas controller and I am using the latest driver 2.1.36.0 with firmware 4015.
View 5 Replies View Relatedi bought a new computer, windows 7 os. it was sold with intel integrated video and a better amd videocard. onboot up the machine told me the amd was not activated. use the device manager or update the drivers. i updated the drivers and it reported they were current. HERE is where the noob made the problem worse. i disbled the integrated video in the device manager and now the monitor only displays a black screen.
View 2 Replies View RelatedI have had this pc for almost 3 years now. This issue has been occurring from early use. I have had to disable my graphics card to have basic use of my computer. It just about manages to handle audio recording but i need to edit some videos as part of my work and its impossible without some form of graphics card.
View 1 Replies View RelatedI recently reinstalled windows and replaced my old NVIDEA Geforce 9600GT which finally died with a new Geforce GTX 460. However, when I installed the drivers, it completely disabled my motherboard's onboard Realtek Azalia soundcard, and for the last few days I've had no sound at all. Nothing I've done has fixed the problem, and every time I try to uninstall the drivers for everything relating to my video card, the HDMI audio devices reinstall themselves from no discernible source every single time I boot up like a virus.I'm about ready to take this pathetic video card back to the shop and demand a refund and get a video card that is not going to screw with my computer like this.
View 9 Replies View RelatedI have a Dell E5520 running Windows 7 Pro 64-bit (as installed by Dell). When I boot the computer, The wireless card tries to connect to the network, but times out. WHen I check the card's status, it shows as "disabled". I change it to "enabled" and it works jst fine until the next boot (warm or cold).
View 4 Replies View RelatedAfter reinstalling Windows 7, I've never been able to play a single video game on my computer (really defeating the purpose of an Alienware). When I try to run Unreal Tournament 2004, the error message reads CRITICAL ERROR: Please enable Direct3D acceleration. You can do this by starting dxdiag and enabling it in Display tab after installing DirectX 8.1b (or later) and latest drivers. Woohoo. So I went to dxdiag, and it says that DirectDraw Acce;, Direct3D Accel, and AGP Texture Accel are all disabled. I went to see what the graphics card is, because I forget...and Windows can't even tell me what card it is. I have no clue. Also, I can't even use the ethernet port on the computer to hard wire a internet connection; I have to use my wireless usb plug in from Netgear.
View 1 Replies View RelatedI own a Dell Inspiron N5010(service code 8ypspp1). I installed all drivers, but when i enter lets say solitaire it says that either hardware acceleration is disabled either my video card doesn't support it. I checked if h.acceleration was turned on and it was. My graphics card apears to be : Standard VGA Graphics Adaptor. I installed java , flash , directx...This happened after i reinstalled windows and format.
View 3 Replies View RelatedSearch Has been Disabled?
View 3 Replies View RelatedAfter having re-set my Internet settings (as part of trying to resolve an issue with not being able to load pictures on Facebook), now a message comes up every time I open a new tab in IE9, saying 'Add-ons currently disabled'.
View 8 Replies View RelatedI m getting pissed off with mozilla firefox.
When i try to change the preferences in Google, it shows this message.
i have already enabled cookies but still it shows that i have cookies disabled.
My key pad disable accidently during typing and it happened many times then i restart the laptop after shutting down then it is enable.
View 1 Replies View RelatedWhen I go to my computer it has a 'BD-ROM Drive' but my DVD-ROM/CD-ROM drive does not appear. I tried putting a CD but nothing happens.
Under device manager I have a CD-ROM drive enabled but below that is 'PBDS DVD+-RW DS-8W1P ATA Device which when I click says this device is disabled (Code 22). I try to click 'enable device' but when I go through the troubleshooting wizard is says windows cannot enable the device.
Can anybody help me? I just want to upgrade my Windows 7 Beta 7022 to 7048 but can't do it without my CD-Rom drive.
I want to get his fixed but if I cant would I be able to upgrade Windows 7 from Vista (I'm running a dual-boot) or will that write over my Vista partition?
I'm having windows 7 home basic 64bit laptop...I don't know how but my laptop's paste option has disabled it's not working. I want to fix my problem as early as possible
View 1 Replies View Relatedi'm having windows 7 home basic 64bit laptop and my paste option has disabled it's not working.
View 2 Replies View RelatedAero is disabled. Cannot start it up. Desktop Windows Manager is enabled in services but when I run Aero trouble shooting utility it say's Desktop Manager is "Disabled". Tried disabling then restarting but still the same.
View 5 Replies View RelatedI have a program (written by a community member for this game) that hooks into the game itself, and grabs the onscreen text. Now, the program itself works, but only when UAC is disabled. I can run it as administrator, and approve the changes it makes to the computer, however it still won't work unless the UAC is disabled.Do any of you guys know what the problem is? When UAC is off, the program does not need administrator priviledges. When the UAC's on, when the program starts up it the UAC makes its appearance and asks if you'd like to allow this program to make changes, and i always click "yes." So I don't understand why, even though i allow it to make changes, it still can't do those changes.My friend, the one who showed me it, runs XP and has no problem with it. if you want the link for it, if you need it, i can get you it. It's pretty simple really, just the program and a .DLL file that goes with it.
View 6 Replies View Relatedyesterday i turned off computer and everything was working perfectly. today i turned it on and i cant login to my user account and theres only 1 user (me). my password has 2 @@'s and the ctrl and alt were disabled i think because i also tried using the onscreen keyboard and cant make the symbols either. my keyboard is portuguese and uses alt + ctrl+2 to make these symbols. I CANT LOGIN TO MY COMPUTER! (not this 1).
Remember i already tried the Onscreen keyboard! ctrl and alt doesnt work either
After disbling the UAC the coputer lost network connection. We noticed that the connection was completely missing form the Adapter Settings screen. We also noticed that most of the services are disabled and the ability to enable them is grayed out. We re enabled UAC but no help. This computer previously had the alureo-k root virus.It was working fine for 2 days until we triggered this.
View 1 Replies View RelatedI have recently upgraded from windows vista to windows 7in vista, I had Kaspesky Internet Security 2011 working properlyAfetr installing windows 7, I installed Kaspersky Internet Security 2013, (since i didn't have te initial CD of KIS 2011)After few days, I realised that Kaspersky is disabled, and when i click enable in maintenance center, nothing happensI tried to uninstall Kaspersky, but the installation could not end properly,I even tried system restore, but the systemm detected an error, and afetr restoration, the problem remainsSo, I still can't uninstall, or activate Kaspersky.
View 3 Replies View RelatedA few days ago I tried connecting a MBlaze modem to my laptop (Windows 7 Ultimate 32 bit) to access internet. But it resulted in instant BSOD everytime. I deleted the modem software after that & didn't try to connect it again. But now, whenever I connect using my LAN broadband, connection works fine as long as I am continuously browsing something. But as soon as I stop browsing and it goes in idle mode in about 10-15 minutes, the connection gets disconnected and in the Broadcom Netlink Ethernet properties it shows "No drivers are available for this device". The only solution to this is a forced shutdown & restart, after which it works fine untill not idle. I am not able to download anything because of this. I tried many things like reinstalling the network adapter driver, unchecking the power management feature, resetting the connection, etc. but nothing is working.
View 9 Replies View RelatedI had to reset my comp to factory settings. After doing so whn I boot it up it gives 2 options to log on as, administrator and user. when I click on admin it says "your account has been disabled. please see your system administrator".
View 1 Replies View RelatedHave had this machine over a year, 3 weeks ago, I started getting a random message that my account has been disabled, contact system admin.
Well, that's me! started in safe mode, enabled the administrator account (no password) then tried to login as Administrator....SAME MESSAGE! Rebooted a couple of times, was able to finally login as my user account: GENE (who is an admin as well) Double checked security profile to ensure *something* hadn't set that - nope. I then used the system restore DVD to do a restore anyways...
Things have been fine for about 2 weeks, but then this morning..same thing.
Tried to login as user GENE (an admin account) received the message, your account is locked out and to contact system admin.. After enabling Administrator through safe mode command line, I rebooted into Administrator fine. When I go to the Control Panel, user GENE is not there, however the user profile exists AND the files are there under c:usersgene really really weird
System: Windows 7 Pro, SP1, Alienware, Intel i7 12GB ram, 64bit workstation - no domain
So I got a new desktop computer, and a User account was already set up for me. So when I got it I did some software installing, anti virus, malwarebytes, windows updates. Had to do some restarts for the Windows updates and all is still well.hen added a password to my user account, and had some more Windows updates, although some weren't critical ones, just recommended. The pc needed to restart again, so I restart. Now when I turn on my pc, Windows will load and show a screen that says "Your account has been disabled. Please contact your system administrator." I click Ok underneath it and it goes to a log in screen with two options. First is Administrator. It requires a password. It's not the one I set up. The second option is Other User. That one I can click, type in my user account name and password and that works. So I can get into my computer ok. But I would really like to get rid of that Account has been disabled message and make it so only my User account shows up at the log in screen. I thought about trying a system restore to a time before it started happening. Would that get rid of Windows updates, if that is the cause
View 2 Replies View RelatedRecently I have bought window's 7. I have extracted the file from the CD on a different PC. & i have installed it successfully. & now, I have tested out Linux 10.04 which I have dual booted with Window's 7. But when I have dual booted with a program called "Wubi", It has disable my function for f8 to show the grub menu. I have posted this in the ubuntuforums but they told me to come here. So I am asking, How many I reinstall Window's 7 without a CD-rom? & My bios doesn't show my USB in the boot tab. So what do i do? I was thinking of installing through network.
View 9 Replies View Related4 days ago we changed the security settings on our home router/network from WPA2- Personal TKIP+AES to just AES. I then changed my Asus UL80vt-A1 wireless adapter settings (Atheros AR9285) to match (from TKIP to AES).This was the ONLY change I made to the system.Then the fun began.
First off a new adapter appeared in my Network connections. It is Wireless Network Connection 2- Microsoft Virtual WiFi Miniport Adapter. Well, that was not there before I made the changes to the security settings. Googling results indicate it is a normal part of Windows 7, it really had never been there before.Restarting the computer the wireless adapter shows as disabled, and I have to run the network diagnostics to re-enable it. It does not matter if I do a shut down or hibernate (my preferred way of shutting down the laptop before going somewhere).
So I thought I should change the security settings back to what I had (TKIP+AES) and set my notebook to TKIP. I also did a Windows Update just in case. I ran a scan with Avast Antivirus, Microsoft Security Essential and Malware Bytes to see if something evil had gotten in, all were clean.Now when I hibernate my laptop it takes 4-5 minutes to shutdown. When I restart it takes 4-5 minutes to restart. I am staring at the intro screen waiting for the logon to appear. Once I get logged in the wifi adapter appears connected, but the computer is acting like it is hung up until all the open programs have finished loading. I can't do anything until the 27 open tabs in Firefox have completely finished being restored. Takes another 3-4 minutes.
move on my part, especially going into this with no knowledge, but I really needed my IP changed.
This guide told me to disable my local host, so I did just that. I assumed it would still appear in the menu but I guess I was wrong. Windows won't detect that network now, but it does detect that it's disabled. I'm running Ubuntu from a disc and the internet is fine. Am I going to have to call my ISP? It's 3:54 AM right now, so I think it may me a bit too late to do that.
On my dual core laptop, running win 7 x64, I have been tweaking the boot configuration to extend battery life and performance. I changed the advanced boot processor setting from "2" to "1" in the "msconfig" panel. Now the boots are much slower and the battery life is not even positively affected. I cannot change this anymore in the "msconfig"! The option that used to be there, "2", is now gone, and if I uncheck it, it is just as slow as "1".
View 8 Replies View Relatedim having a problem with my laptop. my firewall protection has disabled and someone is hijacking my pc. jus wana know what to do.
View 3 Replies View RelatedCant run .bat files in windows 7 x32 with uac disabled?
View 9 Replies View RelatedI was disabling irq's and accidentally disabled my firewire pcie. How do I enable it?
View 6 Replies View Related