With heavy(?) disk use, my system appears to stop disk activity. Resource Monitor shows nothing under Overview and Disk where there would be e.g. system and explore.exe listed as images before this condition.
I'm trying to copy 100-200GB from one disk to another. After some time, this condition happens but I can still to other things. The network is up, I can e.g. ping my LinkSys, ssh to work. Eventually, things will just freeze. Pulling the power cord is the only way to solve so far.
I did install new HW, a SATA controller, but can't remove it. The disk I'm copying to is 3TB WD Green. I need the new SATA controller to use > 2TB disks. I already know the old (onboard BIOS) SATA controller works, I've copied 500-1000GB overnight in the past. Right now, using smaller sized copies, things behave.
The new controler is a HighPoint Rocket 640L, basic disk step as before (i.e. no RAID). I tried manually updating to the latest Windows 7 64b drivers from HighPoint's site, but system tells me I have the latest.
I have a day or two before I can even RMA the adapter. I'd rather try a few things before ending up back where I am in a week if the next adapter has the same issie.
I have been running my machine without any problems for a couple of months, then it started to slow down - or more specifically I would initiate the move of a 10G file from one external (esatabox) to another (same box). Transfer will start at 60M/sec and run for a short time, then all disk IO will stop. Status bar is still 'pulsing' but not moving. After 10-20 minutes it will resume the move but now the transfer rate is 2M/s.
Pull up taskmgr and look at performance shows zero disk IO (it doesn't even show any disks).
Checked RAM
Created a backup image of the OS using the Windows 7 backup, created a recovery disk, booted to recovery disk and restored the image (I didn't change any of my disk settings i.e. raid to ide). Seemed to restore ok, but problem persists. Anyone have any clue??? Or could anyone point me to something in Windows 7 that may help diagnose this problem?
I am having trouble lately with my disk drives. First of all the specs and then the problems :
[code]...
Second behavior, I think since last week, my activity led is pulsing every second and my main drive never seems to go to sleep while my three others do. This is bugging me deeply as I have no idea what exactly is goign on the system.There is NO viruses, NO malware. Windows has been reinstalled from scrath on fresh formatted partion. I've tried to boot the system in diagnotstic mode with the same issue. I do not know what is the problem but I find it very unpleasant.An other test I did, disconnect the RAID entirely and the pulsing continue.Do anyone of you have any idea of what's going on? Are both problem related somehow? Could it be a windows patch causing all of this as it started not so long ago while is was running perfectly before?
My Windows is doing something when I do not use it. The disk makes a lot of noise (r/w) but as soon as I touch the mouse or keyboard it stops.What can be the reason ?
I don't know if this is a harware issue with my SSD, disk controller (motherboard), power supply or something else, but depending on what I'm doing, the computer will operate for a few minutes then freeze and eventually reboot itself. When it reboots, I get the "Bootmgr is Missing" message until I cycle power a couple of times. I've tried booting from the Windows 7 repair disk and typing "bootrec /fixboot", but the problem eventually returns.I can't get a full image update from Acronis because it hangs in the middle of the image, even if I say to ignore bad sectors. If I run the HDTune diagnostic on the SSD, it seems to always stop after about 3 minutes and always in the same spot, at 15,432MB. Is this a problem with the SSD or the disk controller?
Configuration:
O/S: OS Microsoft Windows 7 Ultimate (6.1.7601 Service Pack 1 Build 7601) Motherboard: Gigabyte GA-MA78LMT-S2 CPU: AMD Phenom(tm) II X4 840 Processor, 3200 Mhz, 4 Core(s), 4 Logical Processor(s) BIOS Version/Date:Award Software International, Inc. F13, 8/31/2010 SSD:Microcenter SSD G2 series 64GB ATA Device HDD:Hitachi HDS721010CLA332 ATA Device (1TB) RAM:8GB
Just got a new Acer aspire laptop for christmas. Everything works fine except that every time I turn it on or wake it up, there's about a 10 minute period of non-stop disk activity that causes every other application to come to a grinding hault.I downloaded process monitor and checked it out, and found the two most-accessed files are two TMP files called MSI7895.tmp and MSI8BDA.tmp, both in the Windows installer directory. No idea what either of these files are for.I'm thinking this has something to do with the tons of bloatware that came on this laptop. It's a 2.3 GHz, quad-core CPU with 4GB of RAM. I'd just really like to stop this so it doesn't take 3 minutes to open an Explorer window
When I play 1080p video and there is lot of disk activity at the same time (virus database updates, someone copy something trough local network, DVD is burning...anyway - lot of hard disk activity) then the video shows very poor performance - stops and starts for sec, then stops, slideshows and so on (also with sound). When this happens the CPU is about 50-60% so CPU is not an issue. I also set the media player priority to high in task manager - still bad performance when hard drive activity is high.
I have AMD CPU 3GHz, 3,5MB RAM, 1GB ATI Radeion HD4850
I DID NOT HAVE ANY SUCH ISSUE ON XP...whats the problem?
I've had the computer for about a year, a custom build...it's been working fine, then all of a sudden the problem started & now I'm suffering serious lag & slow down even with the most simple tasks (like clicking on the start icon) the HDD light is on continually & I can hear the drive clicking away. It never stops. (Starts when the windows loading screen comes on)Boot time is also incredibly slow around 10 minutes to boot up.I've just done a clean install of Windows 7 pro x 64 and the problem still persists...no other software installed other than my graphics & sound card drivers.The workstation isn't connected to the net I use a laptop for all that/this.On Task Manager my CPU is 0% & my Memory 6% which is fine..The drive is a Seagate Barracuda 500gb 7,200 SATA II.The programs causing this are mostly with-in "System" & SVChost" processes on the HDD.
For example: Windows service profile RtBackup NTFS free space map NTFS master file table Winevt logs
I have read many threads about these type of problems but with never any clarification.I've got a ton of work to do...and I cant even open control panel under 1 minute right now.
I have been facing this weird issue since this evening. Whenever I boot win7 it gets stuck on the welcome screen and one thing I noticed the HDD activity i too high and it remains like that.I leaved it for around 1 hour and still it is stuck on welcome screen and HDD activity is still damn high
I don't know if this is a harware issue with my SSD, disk controller (motherboard), power supply or something else, but depending on what I'm doing, the computer will operate for a few minutes then freeze and eventually reboot itself. When it reboots, I get the "Bootmgr is Missing" message until I cycle power a couple of times. I've tried booting from the Windows 7 repair disk and typing "bootrec /fixboot", but the problem eventually returns.I can't get a full image update from Acronis because it hangs in the middle of the image, even if I say to ignore bad sectors. If I run the HDTune diagnostic on the SSD, it seems to always stop after about 3 minutes and always in the same spot, at 15,432MB. Is this a problem with the SSD or the disk controller?
Configuration:
O/S: OS Microsoft Windows 7 Ultimate (6.1.7601 Service Pack 1 Build 7601) Motherboard: Gigabyte GA-MA78LMT-S2 CPU: AMD Phenom(tm) II X4 840 Processor, 3200 Mhz, 4 Core(s), 4 Logical Processor(s) BIOS Version/Date:Award Software International, Inc. F13, 8/31/2010 SSD:Microcenter SSD G2 series 64GB ATA Device HDD:Hitachi HDS721010CLA332 ATA Device (1TB) RAM:8GB
Just got a brand new Samsung Series 7 laptop and everything was working fine until i started installing windows updates. The cpu is now stuck at around 15% load and there's constant disk activity too. I run msconfig.exe and disabled programs that I don't really use much, run disk defrag just too make sure the disk was working well. As a result my cpu is running hot (65 degrees) and the battery drains pretty quick.
I have begun to experience an issue with a Nividia GeForce 7300 Video graphics card. It happens when I am playing solitare or writing an email, which is the screen freezes and I have to turn off the computer to regain the monitor function or the computer. The message that I captured in relationship to the issue is WD-20110802-1520.dmp syndata.xml WERInternalMetadata.xml - Video Hardware Error.I have also seen a pop-up that says the NVIDIA card has stopped and successfully recovered.
I recently reformatted my hard drive and reinstalled windows 7 on a computer that's been having freezing problems.After I installed my display driver for my video card, I can't get past the welcome screen after I log in.I can boot up properly in safe mode, and when I disable my video card in my device manager, then I can log in fine. I haven't made any hardware changes since I first built the PC and I've tried updating the drivers to a later version.Is there anyone that's had or problem like this before or know of a solution?Specs are as follows:* OS: Windows 7 Pro 32-Bit* CPU: AMD Phenom II x4 925* Video Card: nVidia Geforce GTS 450* Power Supply: Corsair Builder Series CX430* Hard Drive: Seagate Barracuda 7200.11
For the past 2 days, whenever I have used Mozilla firefox 12.0, after sometime, the browser hangs up and it tells that the browser has stopped responding. The same time, windows explorer also hangs and freezes soon. I will have to restart and then same thing happens again. I tried Chrome also, but the result was same. the browser freezes, and soon after explorer also freezes. I have also noticed that the disk space in the C drive is also getting reduced. In one day 5gb of space has been added up. I have installed and tested with windirstat. Now even the yahoo messenger freezes (not responding) every time and other applications too. I have scanned with MAlwarebytes and Security essential and could not find any infection. For the past 3 days, I can't watch flash videos in Mozilla. Today, several time the same thing happened to chrome also and it says the player crashed.
Over the last few days, my computer has been freezing. Before it freezes I repeatedly get a black screen flashing up and then a message that my graphics driver wasn't working but is has been repaired. It does this about 5 times, before completely freezing (ctrl + alt + del doesn't do anything). I have forced it to shut down and started it up, and it works for about 1 minute. At the time I was using microsoft one note (which I haven't had any problems with before), and google chrome, which I have only recently installed. I tried uninstalling chrome and using IE but it did the same after about only a minute of being switched on.My laptop is about 4 years old, but I've only had problems over the last few days. I'm currenly using safe mode, and I'm not having any crashing/freezing.
After working on my PC for 10 to 15 minutes the CPU shoots up to 100% and it becomes very slow. It even takes minutes to open a folder. Even if i close all applications, still it does not come down. It remains stand still at 100%. I am using Windows 7 ultimate 32 Bit. My desktop configuration is Intel core 2 duo 2.8 GHz, 2 GB DDR2 ram, 250 GB h/d, Asus P5kpl-am/ps motherboard and a Nvidia Geforce 8400 GS graphic card[512 MB]..I am using Windows 7 ultimate [x64 version] , on my laptop. Its a Dell Inspiron 15R, the configuration is Intel Core i3 M380 2.53 GHz, 4 GB DDR3 Ram, 500 GB H/D...But here its working just fine...
Disk defrag will analyze the disc but when I try to defrag at the point the process reaches "PASS 1, 2% REALOCATED" the process stops, neither the mouse or touch pad will work. This has been happening a for some time now. I have cleaned out programs not used anymore, etc. I am using 116gb and have 174 gb free / 32 bit operating system, 3gb ram, windows home 7 premium, service pack 1.
Bought a new HP computer with Windows7. Has plenty of memory and large hard drive. I copied my old files from an XP machine. Have not installed any new hardware. Every time I use the machine, and especially when on the net, the system stops functioning and I get the BSOD with a warning it is performing a crash dump. The screen stays on for a few seconds and then I am asked to restart windows. I cannot understand all the messages but it does mention problem with new hardware or software.
My computer loads normally to the login screen. I enter my password and press enter.It displays the welcome message with the spinning circle thing, and seems to load correctly. When finished, it is at this point my screen goes black showing only the cursor which I can move. When I hover over where the taskbar should be, the screen dims a bit. When I move away from the 'invisible' taskbar, the screen brightens to it's original state. This leads me to believe that the desktop may be loaded, but for some reason is not displaying. After about a minute, everything displays and the computer works perfectly. Occasionally, there is not an issue, and the desktop loads perfectly, seconds after logging in.
Printer directly connected to the system suddenly stops working and shuts the print spool down? I go to restart the spool, print the test page and BAM! print spool has been stopped. At first thought it was a possible infection but I can't find one. Performed a sys restore and it worked only to have a windows critical update start it all over again.....
im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
I woke up this morning, and I found that my computer was displaying this message"Disk boot failure, insert system disk and press enter". There are a ton of needed documents on the computer, and I'm hoping that they can be saved some way.
I've been having this error even after reformatting and reinstalling Windows 7 on my desktop. I've done reformatting / reinstalling Windows 7 several times, yet the problem still occurs. I'm thinking of my HDD as being corrupted or messed up. The problem occurred after I accidentally hit the CPU when I was stretching my foot. The screen froze after that. Upon rebooting it, 'Disk boot failure, Insert system disk and press enter' occurs. After I entered the DVD installer of Windows 7, the screen just hangs.
I have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.
However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine. I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?
My friend bought a new PC and needed to put am OS on it. He put in the W7 disk and the error message 'disk boot failure insert system disk and press enter' appeared before installation was shown. He has tried changing around BIOS and it also recognises the hard drive and DVD/ CD ROM drive. Here is the specification he was given:Case : CIT Reaper Black Mesh fronted Tower CaseMotherboard : Gigabyte 78LMT Motherboard TechnologyCPU : AMD Bulldozer FX 4170 4.2ghz 8mb CacheHard Drive : 1tb Sata Hard DriveMemory : 8gb DDR3 1600mhz MemoryOptical Drive : 24x Dual Layer Sata DVD WriterGraphics Card : Nvidia Geforce GTX 650 2gb GDDR5 With HDMIPower Supply : 750 Watt Branded Power Supply Also, he has tried booting BIOS in different order
My system pass POST flashes the Windows scroll across the bottom and then stops loading. Waits exactly +/- 8 Min, then finishes loading. Tried everything.
I have a problem with downloading a file above roughly 80MB it just stops I tried chrome,firefox and opera and nothing works. On Firefox and Chrome the download just stops on Opera the speed changes to unknown and it stops downloading.I don't have a wireless connection I use modem and my net connection should be okay since on my old comp with same net it worked without problem.
When starting the computer, I keep getting "Disk boot failure, insert system disk and press enter". Nothing works other than putting in the boot disk and hitting the restart button on the tower. Then it will boot up and run fine. But how do I stop it from having to have the disk in order to load? Checked in the BIOS and the hard drive is the first load.
