System Stops Functioning When On Net
Nov 27, 2011
Bought a new HP computer with Windows7. Has plenty of memory and large hard drive. I copied my old files from an XP machine. Have not installed any new hardware. Every time I use the machine, and especially when on the net, the system stops functioning and I get the BSOD with a warning it is performing a crash dump. The screen stays on for a few seconds and then I am asked to restart windows. I cannot understand all the messages but it does mention problem with new hardware or software.
View 6 Replies
ADVERTISEMENT
Mar 11, 2011
Ever since I installed Windows 7 on my Toshiba Satellite computer, the keyboard unexpectedly stops functioning at times, perhaps once a week. The only solution is to restart the computer.Windows Support says for me to call Toshiba, and Toshiba Support blames it on Windows. It seems obvious (even though nothing is obvious with computers) that the keyboard is in working order - since I can type 99 percent of the time - the glitch has to be with Windows.
View 2 Replies
View Related
May 27, 2009
I am getting this error, a device attached to the system is not functioning, when I try and log in remotely after I have successfully logged in before. Also I get the same error when I try and log in locally.
View 7 Replies
View Related
Jul 17, 2010
I bootcamped my Macbook Pro 15" (2010) model and installed Windows 7 within a 40GB partition. Shortly after I ran out of space and needed to upgrade my partition. So I created a system repair disc and created a system image. Then I rebootcamped and installed Windows 7 on an 80GB partition. Before I reinstalled and repartitioned my hdd, I booted from my system repair disc to check for functionality. It worked fine and allowed my the option of checking or unchecking the box that reads "Format and repartition discs". Now that I've reinstalled windows 7 AND all the apple drivers using my OS X disc, when I boot from the system repair CD and follow the steps, I cannot uncheck the box asking to format all discs. I can't do this obviously because it would format the entire hdd and delete my OS X partition which has all my stuff backed up on and has all of my data.
View 2 Replies
View Related
Jul 15, 2012
I have tried to do a system restore to a point previously with another problem, but get the message 'Can't system restore, file or directory is corrupted and unreadable (0x80070570).'
This applies to all restore points available. I have tried System Repair, but that found nothing.
View 9 Replies
View Related
Nov 4, 2012
I have an older PC (AMD Athlon II x4 630 Processor) running Windows 7 Home Prem - 64 bit. I noticed about a week ago my mouse was acting up (figured it was a bad mouse and didn't think much about it), soon afterwards I started getting that blue screen of death and it would shut down. My current virus protections is AVG, which I ran. I then ran Malewarebytes, Superantispyware and Spybot in both regular and safe mode. They seem to find a few things but nothing that really looked serious. I tried System Restore but got an error statement that it wasn't functioning correctly because of some type of Volume Shadow component problem (which I researched and turned back on to no avail).
Other symptoms are when I try going to control panel or even the microsoft update page they open but are minimized - when I try to open them larger they almost look like they open and go to the far right of my screen out of site. The reason I think it is a virus is that in safe mode the control panels opens right up - but still cant get to microsoft update page. This problem seems to be getting worse the last couple of days. What is weird I really don't notice much else wrong with pc. I can still go online without a problem, home page hasn't changed any and haven't noticed pc slowing down at all.
View 14 Replies
View Related
Aug 12, 2009
I have been running my machine without any problems for a couple of months, then it started to slow down - or more specifically I would initiate the move of a 10G file from one external (esatabox) to another (same box). Transfer will start at 60M/sec and run for a short time, then all disk IO will stop. Status bar is still 'pulsing' but not moving. After 10-20 minutes it will resume the move but now the transfer rate is 2M/s.
Pull up taskmgr and look at performance shows zero disk IO (it doesn't even show any disks).
Checked RAM
Created a backup image of the OS using the Windows 7 backup, created a recovery disk, booted to recovery disk and restored the image (I didn't change any of my disk settings i.e. raid to ide). Seemed to restore ok, but problem persists. Anyone have any clue??? Or could anyone point me to something in Windows 7 that may help diagnose this problem?
View 3 Replies
View Related
Jan 27, 2013
With heavy(?) disk use, my system appears to stop disk activity. Resource Monitor shows nothing under Overview and Disk where there would be e.g. system and explore.exe listed as images before this condition.
I'm trying to copy 100-200GB from one disk to another. After some time, this condition happens but I can still to other things. The network is up, I can e.g. ping my LinkSys, ssh to work. Eventually, things will just freeze. Pulling the power cord is the only way to solve so far.
I did install new HW, a SATA controller, but can't remove it. The disk I'm copying to is 3TB WD Green. I need the new SATA controller to use > 2TB disks. I already know the old (onboard BIOS) SATA controller works, I've copied 500-1000GB overnight in the past. Right now, using smaller sized copies, things behave.
The new controler is a HighPoint Rocket 640L, basic disk step as before (i.e. no RAID). I tried manually updating to the latest Windows 7 64b drivers from HighPoint's site, but system tells me I have the latest.
I have a day or two before I can even RMA the adapter. I'd rather try a few things before ending up back where I am in a week if the next adapter has the same issie.
View 3 Replies
View Related
Aug 16, 2011
Printer directly connected to the system suddenly stops working and shuts the print spool down? I go to restart the spool, print the test page and BAM! print spool has been stopped. At first thought it was a possible infection but I can't find one. Performed a sys restore and it worked only to have a windows critical update start it all over again.....
View 3 Replies
View Related
Aug 30, 2012
when I try to burn a system repair disc the program stops working
View 1 Replies
View Related
Jun 1, 2012
My system pass POST flashes the Windows scroll across the bottom and then stops loading. Waits exactly +/- 8 Min, then finishes loading. Tried everything.
View 1 Replies
View Related
Oct 5, 2011
I have a problem with downloading a file above roughly 80MB it just stops I tried chrome,firefox and opera and nothing works. On Firefox and Chrome the download just stops on Opera the speed changes to unknown and it stops downloading.I don't have a wireless connection I use modem and my net connection should be okay since on my old comp with same net it worked without problem.
View 5 Replies
View Related
Jan 29, 2013
I'm running Outlook 2010 with about 5 separate POP 3 accounts. I archive regularly and compact after archiving. After a lot of trouble cloning a new C drive to an SSD, Outlook, along with a lot of other software, began acting strangely. Everything has pretty much been resolved except for the Outlook problem.
For no reason I can isolate, Outlook will suddenly close, giving the message that it had to close and it will now try to retrieve my data. It does so, unless I was in the middle of composing an email - that will be gone! Sometimes, instead of closing, it freezes and says application not responding.
I checked the disk for errors using scan now and it's fine. I've run memtest and it's fine. I've run in safe mode and it just shut down with no comments. In working my way through suggestions on this board, I just ran Sysinternals Process Explorer until the error occurred and went back to normal. In looking at Process Explorer, I'm afraid the actual data is overwhelming to me. However, I'll attach everything I have.
Event Viewer shows Error 1000. General:
Faulting application name: OUTLOOK.EXE, version: 14.0.6126.5003, time stamp: 0x505b1685
[Code].....
View 5 Replies
View Related
Jan 1, 2012
I've recently built a new system from scratch, I can verify all the connectors are plugged in correctly and powered. Today I went out and bought a small internal 24x dvd drive to install my copy of windows 7 home premium OEM with and this is where my problems began. Whenever I set the dvd drive as the first boot option and put the OEM disc inside it, the screen stays black and does a Windows is Loading files bar across my screen I believe twice at varying speeds then disappears and leaves me with nothing but a black screen. I've waited and have it still sitting there blank at this very moment. I have done a lot of googling and only seen one other person with this same issue have his problem solved by resetting his BIOS to default. Needless to say this didn't work. I've tried changing all the storage settings from AHCI to IDE to RAID and disabling/enabling some setting in each with no luck. Below are the system specs.
Motherboard: ASrock gen3 extreme3 Z68 chipset
CPU: i5 2500k 3.30Ghz
GPU: AMD Radeon 6950 came factory set to 870 Mhz core clock (overclocked from 800)
RAM: 4x4 GB Corsair Vengeance DDR3 1600 Mhz (I've also checked to make sure the proper voltage and frequency was used on these in the BIOS)
SSD: OCZ Agility 3 120GB
PSU: Coolermaster 1000W
Optical Drive: 24x Multiformat DVD/CD Writer with the obvious Sata connections to hook up to my mobo
This is my first pc build and I assume that asrock mobo's version of BIOS is UEFI.
Edit : I've tried removing 3 of my RAM sticks and now it just freezes with the grey bar fully loaded on Windows is Loading files. I then tried loading my old windows XP CD and it was working until it hit a BSOD which occurs consistently if I try to load XP. On more attempts at loading windows 7 it gets past the grey bar stage to the black screen not loading anything stage again.
View 5 Replies
View Related
Apr 24, 2012
i have a compaq presario cq56 hp laptop and it suddenly died on me it boots up to a black screen and the caps light flashers once continually and the f12 button is on solid orange..I read that the CPU is not functioning is there a fix for this and how.
View 9 Replies
View Related
Jan 22, 2009
Should there be an Optical Drive section on this forum? Just a suggestion.
Anyway, has anyone gotten ANY Blu-Ray drive to work in Win 7 64-bit yet? I've got the LG GGC-H20L Blu-ray/HD combo and I was at least able to get the drive to lose the caution/warning symbol in the device manager thanks to the reg edit in another thread. But I still can't get the drive to read any blu-rays. I've using Total Media Theatre which is fantastic in Vista.
Just wondering what some others have encountered on their Win 7 journey. Anything with 32-bit(I might triple boot just to find out)? Anything with a different program? Anybody with a different drive? Heck, anybody with the SAME drive?
View 9 Replies
View Related
Jan 31, 2012
I installed Win 7 Home Premium and I am having trouble spinning up my CD Drives (both of them). They were working under Win XP.If I attempt to install a game, the CD does not spin up.
View 2 Replies
View Related
Apr 25, 2012
Several times I have installed/reinstalled java but Win 7-64 Home Premium does not allow this to run.Programme is installed but applications, e.g. ping test speed test are reporting Java requires to be installed.
View 6 Replies
View Related
Nov 23, 2011
ati-bonefish motherboard windows 7 32bit
View 3 Replies
View Related
Jun 27, 2012
there is this usb printer at work which was printing fine. the printer has stop functioning. when i went to printer properties and checked the ports section, i realised that usb port is not showing.the printer is hp officejet 6500 wireless
View 3 Replies
View Related
Mar 19, 2011
I have an ASUS N61Jv, running Windows 7 Professional 64bit (legal, pre-installed). The built in webcam is suddenly not functioning anymore. I can't recall changing anything, so I'm not sure why this is happening. When opening the cam in skype, windows live messenger, or lifeframe3, it keeps saying that the cam is in use by another application. I've reinstalled the driver, but to no avail. I have also reinstalled the software programs.
Here's some information:
USB2.0 UVC 2M WebCam
USBVID_13D3&PID_5122&REV_0202&MI_00
View 14 Replies
View Related
Oct 22, 2012
I wanted to delete a folder in my documents but it was giving me an error which I cannot remember exactly now, but after doing some research, most sites had suggested that I run a Chkdsk. My computer successfully completed the Chkdsk, but now my computer is in some sort of coma where it loads up fine, but after logging in, there is no text whatsoever on the screen. On top of this the start bar does not work and any explorer based functions are extremely large,pixelated and absent text.I'm using Windows 7 Ultimate x32 on a 2009 Toshiba Satellite In the last year of high school and don't have most of my files backed up anywhere?
View 1 Replies
View Related
Jun 13, 2009
So I'm guessing the new HT Omega drivers for Windows 7 may have been released a little prematurely. I can install the drivers but as soon as the audio service is initialized the whole system locks up, requiring a hard reboot. Anyone else have this problem?
By the way, I have the regular CLARO, not the +.
View 3 Replies
View Related
Aug 22, 2010
a message box appeared on my screen and after i clicked yes, i noticed that all my desktop icons turned white and wen i try to click them, they will attempt to open with windows photo viewer which is always not successful because the windows photo view displays a message that says it cant open dis file. Normally, d icons should show d logo of the application and wen clicked, they should open the application but mine is not working dis way anymore.
View 2 Replies
View Related
Oct 22, 2012
I wanted to delete a folder in my documents but it was giving me an error which I cannot remember exactly now, but after doing some research, most sites had suggested that I run a Chkdsk. My computer successfully completed the Chkdsk, but now my computer is in some sort of coma where it loads up fine, but after logging in, there is no text whatsoever on the screen. On top of this the start bar does not work and any explorer based functions are extremely large, pixelated and absent text.
View 1 Replies
View Related
May 26, 2011
My one RAM chip just stop functioning (some RAM parity error?). Now i have only 1 GB RAM(ddr2 pc2 6400/5300) in one slot and another slot is empty. I wanted to know if i could install another RAM chip in this slot (of probably higher MHz frequency or of ddr3 type) while maintaining compatibility with the existing one.
View 5 Replies
View Related
Jun 23, 2011
I have a Toshiba Satellite Laptop which is running Windows 7 Home Premium 64 bit.I don't know how long it has been since the DVD drive stop functioning. Whenever I insert a factory DVD,CD, or even custom/ blanks my drive does not recognize the inserted device. For some reason, which I cant understand, the drive itself clocks, but the OS isn't recognizing anything. When I checked the drivers, it said they were up to date.
View 3 Replies
View Related
Jul 22, 2012
The ALT Keys on my USB Keyboard used to work perfectly fine until around the 1st. I'm unsure of what caused this issue.The computer I'm using is a laptop and both of the ALT keys on the laptop work perfectly fine.The USB Keyboard I have has ALT keys but those don't function at all. They used to, but not anymore.I've tried checking and unchecking sticky keys, looking at the On-Screen Keyboard, uninstalling, rolling back, and updating drivers... full system restores to middle of last month which is about a week before I suspected it stopped working.
View 2 Replies
View Related
Oct 12, 2012
I have made a thread earlier with some SS. Unfornunately i forgot to submit my thread so here I am. I am not at home but I would like to ask about my wireless lan driver. I just recently installed windows 7 on my Toshiba Satellite U500. It's original OS is Windows Vista. At the first day that I changed to windows 7, Everything is working perfectly. But the second day, My Wireless lan Driver is not working. I have my WiFi on but whenever i troubleshoot it, it says connect an ethernet cable, and it says something is broken..
View 9 Replies
View Related
Mar 19, 2012
my transcend 16gb pendrive connects n disconnects constantly.when connected eset smart security 5 detects it but when scanned,says error opening.the pendrive is not seen in any other windows except in device manager,while not in storage.I tried in safe mode too,but still the same.It shows the same signs in any other computers or laptops.I have windows 7.The pendrive doesnt gets heated however long u keep in ports and shows blinking of light as usual
View 1 Replies
View Related
Sep 12, 2012
Please my webcam microphones are not functioning. I need its drivers
View 1 Replies
View Related
