So I'm guessing the new HT Omega drivers for Windows 7 may have been released a little prematurely. I can install the drivers but as soon as the audio service is initialized the whole system locks up, requiring a hard reboot. Anyone else have this problem?
By the way, I have the regular CLARO, not the +.
no win 7 beta driver yet from ht omega.control panal applet freezes my pc-if i try to open it.
View 6 Replies View RelatedHT Omega - Driver Downloads
Windows7Rev.817727MBJun 2009 c81772w7rc1.zip
Good job HT Omega, nice to see good support.
I've been using Windows 7 x64 as my default OS since build 7000.
I have an HT Omega Striker 7.1 sound card that has worked fine from build 7000 to 7127. I used the Vista x64 driver for all these builds. I used 7127 for quite some time because when I tried upgrading to 7264, I encountered a problem.
After installing the driver, whether it's the Vista driver or the 7 driver, it won't let me open ANY applications besides explorer (not IE). It tries to open and then (I assume) it crashes, because nothing comes up and the icon fades back as if I never clicked it. (Although, if I open Task Manager, I can see *.exe running but only using 2mb of RAM...?) I can uninstall the driver, reboot, and all my applications work again.
I have no sound without the driver and no applications with the driver.
Also, this problem is still around in 7600, as I just tried it.
Can anyone provide any insight on what the problem may be?
After building my current system and getting frustrated that Realtek wasn't producing any passable sound for my 5.1 speakers, I decided to pick up a soundcard and found the Striker 7.1 from HT Omega had great reviews.
I installed the Windows 7 drivers from their site and had beautiful sound for about a minute before it started deteriorating and I was listening to something from my music that sounded like the devil singing underwater. I replugged the jacks in and got not change, so I started searching around and found some solutions on this site. Merging the Windows 7 and vista drivers (-HsMgr.exe) worked okay, but I had some pops and static in the sound. Installing just the vista drivers worked pretty well for awhile wither fewer pops and static, but the sound again deteriorated after about 15 minutes.
Now I am at a loss. Is this a driver, software, or hardware problem? All I can currently think of is that I'm using a RC of Windows 7 professional 64bit that was out just before the official release, and perhaps I should reformat with whats currently on the shelves. I'd much rather find out I should try that than return the card or find out my pci slot is faulty.
I have the HTOmega striker 7.1, and I cannot get windows to recognize it. I try to load the drivers and it says that "there is no device installed". This card worked perfectly in my XP media center ed. But I have been fighting with this a couple of days trying to get this thing sorted. I have the onboard sound off in the bios. This is in windows 7 home premium.
View 2 Replies View Relatedht omega striker 7.1 sound card
running optical out and into my amplifier, have tested the amplifier input, and the optical cable. tried the drivers from manufacturers website, a couple sets of vista drivers, no drivers, and tried switching the default optical out back and forth with different drivers in the windows 7 "manage audio devices" screen.
on that screen it shows a sound bar going up and down, as if the pc thinks it is sending sound out of that output,. but nothing. double checked the optical line is coming out of the output on the back of the card, checked volume...out of ideas!
anyone else have this issue? not sure if the drivers are not working properly or just need to try some different vista drivers and squeeze sound out until the windows 7 drivers are working properly.
(should mention this exact setup worked fine 2 days ago, until i installed windows 7)
i have a compaq presario cq56 hp laptop and it suddenly died on me it boots up to a black screen and the caps light flashers once continually and the f12 button is on solid orange..I read that the CPU is not functioning is there a fix for this and how.
View 9 Replies View RelatedShould there be an Optical Drive section on this forum? Just a suggestion.
Anyway, has anyone gotten ANY Blu-Ray drive to work in Win 7 64-bit yet? I've got the LG GGC-H20L Blu-ray/HD combo and I was at least able to get the drive to lose the caution/warning symbol in the device manager thanks to the reg edit in another thread. But I still can't get the drive to read any blu-rays. I've using Total Media Theatre which is fantastic in Vista.
Just wondering what some others have encountered on their Win 7 journey. Anything with 32-bit(I might triple boot just to find out)? Anything with a different program? Anybody with a different drive? Heck, anybody with the SAME drive?
I installed Win 7 Home Premium and I am having trouble spinning up my CD Drives (both of them). They were working under Win XP.If I attempt to install a game, the CD does not spin up.
View 2 Replies View RelatedSeveral times I have installed/reinstalled java but Win 7-64 Home Premium does not allow this to run.Programme is installed but applications, e.g. ping test speed test are reporting Java requires to be installed.
View 6 Replies View Relatedati-bonefish motherboard windows 7 32bit
View 3 Replies View Relatedthere is this usb printer at work which was printing fine. the printer has stop functioning. when i went to printer properties and checked the ports section, i realised that usb port is not showing.the printer is hp officejet 6500 wireless
View 3 Replies View RelatedI have an ASUS N61Jv, running Windows 7 Professional 64bit (legal, pre-installed). The built in webcam is suddenly not functioning anymore. I can't recall changing anything, so I'm not sure why this is happening. When opening the cam in skype, windows live messenger, or lifeframe3, it keeps saying that the cam is in use by another application. I've reinstalled the driver, but to no avail. I have also reinstalled the software programs.
Here's some information:
USB2.0 UVC 2M WebCam
USBVID_13D3&PID_5122&REV_0202&MI_00
I wanted to delete a folder in my documents but it was giving me an error which I cannot remember exactly now, but after doing some research, most sites had suggested that I run a Chkdsk. My computer successfully completed the Chkdsk, but now my computer is in some sort of coma where it loads up fine, but after logging in, there is no text whatsoever on the screen. On top of this the start bar does not work and any explorer based functions are extremely large,pixelated and absent text.I'm using Windows 7 Ultimate x32 on a 2009 Toshiba Satellite In the last year of high school and don't have most of my files backed up anywhere?
View 1 Replies View RelatedBought a new HP computer with Windows7. Has plenty of memory and large hard drive. I copied my old files from an XP machine. Have not installed any new hardware. Every time I use the machine, and especially when on the net, the system stops functioning and I get the BSOD with a warning it is performing a crash dump. The screen stays on for a few seconds and then I am asked to restart windows. I cannot understand all the messages but it does mention problem with new hardware or software.
View 6 Replies View Relateda message box appeared on my screen and after i clicked yes, i noticed that all my desktop icons turned white and wen i try to click them, they will attempt to open with windows photo viewer which is always not successful because the windows photo view displays a message that says it cant open dis file. Normally, d icons should show d logo of the application and wen clicked, they should open the application but mine is not working dis way anymore.
View 2 Replies View RelatedI wanted to delete a folder in my documents but it was giving me an error which I cannot remember exactly now, but after doing some research, most sites had suggested that I run a Chkdsk. My computer successfully completed the Chkdsk, but now my computer is in some sort of coma where it loads up fine, but after logging in, there is no text whatsoever on the screen. On top of this the start bar does not work and any explorer based functions are extremely large, pixelated and absent text.
View 1 Replies View RelatedMy one RAM chip just stop functioning (some RAM parity error?). Now i have only 1 GB RAM(ddr2 pc2 6400/5300) in one slot and another slot is empty. I wanted to know if i could install another RAM chip in this slot (of probably higher MHz frequency or of ddr3 type) while maintaining compatibility with the existing one.
View 5 Replies View RelatedI have a Toshiba Satellite Laptop which is running Windows 7 Home Premium 64 bit.I don't know how long it has been since the DVD drive stop functioning. Whenever I insert a factory DVD,CD, or even custom/ blanks my drive does not recognize the inserted device. For some reason, which I cant understand, the drive itself clocks, but the OS isn't recognizing anything. When I checked the drivers, it said they were up to date.
View 3 Replies View RelatedThe ALT Keys on my USB Keyboard used to work perfectly fine until around the 1st. I'm unsure of what caused this issue.The computer I'm using is a laptop and both of the ALT keys on the laptop work perfectly fine.The USB Keyboard I have has ALT keys but those don't function at all. They used to, but not anymore.I've tried checking and unchecking sticky keys, looking at the On-Screen Keyboard, uninstalling, rolling back, and updating drivers... full system restores to middle of last month which is about a week before I suspected it stopped working.
View 2 Replies View RelatedI have made a thread earlier with some SS. Unfornunately i forgot to submit my thread so here I am. I am not at home but I would like to ask about my wireless lan driver. I just recently installed windows 7 on my Toshiba Satellite U500. It's original OS is Windows Vista. At the first day that I changed to windows 7, Everything is working perfectly. But the second day, My Wireless lan Driver is not working. I have my WiFi on but whenever i troubleshoot it, it says connect an ethernet cable, and it says something is broken..
View 9 Replies View Relatedmy transcend 16gb pendrive connects n disconnects constantly.when connected eset smart security 5 detects it but when scanned,says error opening.the pendrive is not seen in any other windows except in device manager,while not in storage.I tried in safe mode too,but still the same.It shows the same signs in any other computers or laptops.I have windows 7.The pendrive doesnt gets heated however long u keep in ports and shows blinking of light as usual
View 1 Replies View RelatedPlease my webcam microphones are not functioning. I need its drivers
View 1 Replies View RelatedEver since I installed Windows 7 on my Toshiba Satellite computer, the keyboard unexpectedly stops functioning at times, perhaps once a week. The only solution is to restart the computer.Windows Support says for me to call Toshiba, and Toshiba Support blames it on Windows. It seems obvious (even though nothing is obvious with computers) that the keyboard is in working order - since I can type 99 percent of the time - the glitch has to be with Windows.
View 2 Replies View RelatedI am getting this error, a device attached to the system is not functioning, when I try and log in remotely after I have successfully logged in before. Also I get the same error when I try and log in locally.
View 7 Replies View RelatedI created a new standard account on my computer. I installed chrome and messenger onto it, then switched back to my admin account. I opened up chrome, and my history, themes, and all customizations were gone. It gave me some error that I failed to record. I tried to install a theme but it gave me the same error. I decided to uninstall chrome. But when I attempted to re-install it, it wouldn't work. I eventually gave up and tried to install firefox. It gave me an error something along the lines of "Profile is missing or inaccessible" I also attempted to open trillian, an IM program. Usually, it automatically logs in, but this time I had to manually type it in. But it would not log me in, giving me an error "unable to read from or write to the configuration directory for this account" I had a similar problem with yahoo messenger. Afterwards I discovered, my music files and videos I had on my admin account would not play, and gave me an error. The songs were erased off of my media player, and even though the files were still on my computer, none of them would play.Everything on my new account seems to work, but nothing on my admin account will work.
View 2 Replies View RelatedLast night my keyboard and touchpad stopped working on my laptop and now I'm using the usb mouse and the "On screen keyboard". I have done a system restore but to no avail. I've also taken out the battery (found in another thread) but nothing. In device manager there is an exclamation mark next these:1. Under keyboard. keyboard device filter2. Under mouse and other pointing devices. ELAN PS/2 port smart padDouble clicking both of them gets these properties for each respectively:1. Under keyboard. Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)2. Under ELAN PS/2 port smart pad. This device cannot start. (Code 10)The laptop is an Asus x53sv running win 7 64bitI made a recovery disc (in fact there 5) when I first got it but using that wipes the hard drive C:. I know that for XP there is a repair program which you get to by following the procedure for doing a re-install but you have this option which doesn't wipe the hard drive. I've used it.Does something similar exist for Win 7?
View 14 Replies View Relatedmy keyboard and mouse doesnt work when i boot my pc..but when i tried it again and again only my mouse will work but during startup repair it will not function again...whats the problem with my pc? is it the mouse and keyboard or its inside the cpu ?
View 9 Replies View RelatedI bootcamped my Macbook Pro 15" (2010) model and installed Windows 7 within a 40GB partition. Shortly after I ran out of space and needed to upgrade my partition. So I created a system repair disc and created a system image. Then I rebootcamped and installed Windows 7 on an 80GB partition. Before I reinstalled and repartitioned my hdd, I booted from my system repair disc to check for functionality. It worked fine and allowed my the option of checking or unchecking the box that reads "Format and repartition discs". Now that I've reinstalled windows 7 AND all the apple drivers using my OS X disc, when I boot from the system repair CD and follow the steps, I cannot uncheck the box asking to format all discs. I can't do this obviously because it would format the entire hdd and delete my OS X partition which has all my stuff backed up on and has all of my data.
View 2 Replies View RelatedAll the programs from yupptv are not played properly. Every 5 sec it is breaking and comes back when you move courser after 30 seconds.
View 1 Replies View Related
