I have a custom built PC with a Pioneer bd rom drive. None of my dvd's can be read, I can view some of them IF I use Total Media Player, but, the dvd drive doesn't give me any information about the inserted dvd. I've removed the upper and lower filters, no help. I've removed the drive totally and let Windows detect it upon restart.....still doesn't work. I've tried other external drives, and I have the same problem with them detecting and reading the dvd's/ I'm lost as to what to try next.. I'm running Win 7 Ultimate x64 and I'm about ready to smash it....I've also tried Virtual Clone Drive and that doesn't work now either....
I am having problems with my DVD Reader and Writer drive on my Win 7 laptop. It works mostly when it wants to not when i tell it to. But it rarely wants to start working again.I have tried a few methods trying to get the DVD driver working again by:
- Using Microsoft Fix it (No problems found) - Deleting the Upper and Lower filters (Still wont show the DVD icon - Unread disc) - Troubleshooting (No help at all)
My laptop, running Windows 7, suddenly started giving me an error message with code 10, and says "You need to format the disk before you can use it, do you want to format now", every time I insert a thumb drive or an SD ram card. When I go into disk management it shows that they are both "raw"n but when I insert them into my desktop running XP they read fine and disk management shows them as fat32. Why would Windows 7 suddenly start reading the fat32 thumb drives and SD ram cards as Raw? How can I get it to read them, as they read fine on other computers? I also have an external cdrom/dvd drive (because Windows 7 won't recognise the internal cdrom either), and also have an external hard drive that work fine.
I bough a new laptop 2 weeks ago (Asus with windows 7) and decide it was the time to install Microsoft office today, what a surprise the CD drive can't read anything...I've tried CD, DVD and Blue ray nothing work!Basically, when I click on the DVD RW drive it open the DVD reader and said <please insert disc into drive>. Then, it start reading for 2 seconds, stop before opening anything and bring me back the same error <please insert disc into drive> like if there was nothing in the drive. I think the drive itself is functional it is only a reading issue. I found some tips but nothing work for me
The problem is I have two DVD Combo drives. Both of them are not working unfortunately. The drives will take the CD/DVD in but doesn't read anything. When I called a professional he informed me the computer is outdated and I need to update . So I took his advice and updated the MOBO and processor. I kept the other components as it is. After upgrading the drives were working fine. Then all of a sudden I have the same issues again. This time atleast I want to check with the great minds here to see if I can get a help. Lemme tell you I am no noob when it comes to computers but not an geek too. I know how to execute the solution you guys are gonna give me. Here is my config.
OS Version: Microsoft Windows 7 Ultimate, 32 bit Processor: Pentium(R) Dual-Core CPU E5700 @ 3.00GHz, x64 Family 6 Model 23 Stepping 10 Processor Count: 2 RAM: 2047 Mb Graphics Card: NVIDIA GeForce 8400 GS (Microsoft Corporation - WDDM v1.1), 512 Mb Hard Drives: 1x500GB SATA @7200rpm , 1x250GB SATA @7200rpm Motherboard: ASUSTeK Computer INC., P5G41T-M LX Antivirus: Norton Internet Security, Updated and Enabled Optical Drives: 1 x HL-DT-ST DVDRAM GH24NS70 ATA Device - SATA 1 x HL-DT-ST DVD-RAM GSA-H55N ATA Device - IDE
To give you heads up I have Googled the issue and found some so called solutions but nothing worked for me.
1. Changing the Link State Power Management settings.
2. There are no upper and lower filters so I couldn't do anything more.
I have a Toshiba Satellite laptop with windows 7 and the DVD drive is not working at all. I have tried with brand new DVDs, music CDs and video games and none of them work.When I put in a disc there are a few wurring noises but nothing loads up. When I click on the drive in Computer the drive opens and tells me to insert a disc.In properties and Device Manager it says the device is working properly.I have tried reinstalling the drive, deleting upper and lower filters, and I have run the Windows Fixit program and nothing has worked so far. My drive is: TSSTcorp CDDVDW TS-L633C ATA Device.My computer is about a year old and is completely standard. I have hardly used the DVD driver at all since I purchased the computer so I have no idea how it could have broke.
I noticed this a few minutes ago, I just got finished watching a movie, and was putting music on when I was about to load World of Warcraft, I brought up winamp with the tracks from the CD that I had saved to my playlist, and it'd skip right over them to the next track I'd saved on my hard drive, I'd tried deleting the filters as I'd seen in other threads, and even shutting down, unplugging it, and re-plugging it back into my power supply, but still to no avail.
about my a4tech pocket usb when i plugged it to my toshiba satellite e1802 it read as generic usb but when i plugged my usb flash drive it doesnt read by my a4tech pocket usb hub.
I have an issue with my computer. The problem is I have two DVD Combo drives. Both of them are not working unfortunately. The drives will take the CD/DVD in but doesn't read anything. When I called a professional he informed me the computer is outdated and I need to update . So I took his advice and updated the MOBO and processor. I kept the other components as it is. After upgrading the drives were working fine. Then all of a sudden I have the same issues again.
ASUS P5G41T-M LTX MOBO. Intel Pentium E5700 2 GB Transcend 1333Mhz RAM 500 GB x 1 Seagate @7200 rpm - SATA 250GB x 1 Seagate @7200rpm - SATA ASUS EN8400 GS 512MB Graphic Card. Windows 7 Ultimate 32-Bit Version 6.1 (Build 7600).
Optical Drives:
1 x HL-DT-ST DVDRAM GH24NS70 ATA Device - SATA 1 x HL-DT-ST DVD-RAM GSA-H55N ATA Device - IDE
1. Changing the Link State Power Management settings.
2. There are no upper and lower filters so I couldn't do anything more.
My drive was running perfectly until i tried to burn a data-dvd disc the other day. It has done it before just fine and on the same day, i burned a music cd. The drive is: PLDS DVD+-RW DH-16A6S ATA DEVICE.It all started when i tried to backup one of my .iso files by copying it to a memorex 8x 8.5GB DVD+R with Nero 10. It stopped halfway with some generic error(that I'm sorry that i cannot remember). Being a complete novice, i uninstalled Nero and blamed the program for wasting 8 of my discs .I tried roxio 2012 next-Once again, it froze halfway through the copy and gave me some error. I tried ImgBurn-Halfway samething MagicISOMaker-Made it 100% Burning a disk that doesn't work. (tested in another PC)After going through roughly 15 discs, i decided to visit the dell support page to see if they had any firmware updates. They did: Windows/DOS based firmware flash update for PLDS DH-16AAS DVDRW.
Release Date: 8/17/2009 Version: A01JD12
So, now my drive has the latest firmware update for it i should be in good hands....(or not)After that, i tried maybe 2 more failed burns and then my drive just refused to read anything at all. Blank dvds, CDs with data on them (it would show up as a blank Cd...)I tried the Microsoft Fix it tool about a thousand times hoping that it would work one day...(i'm actually running it right now...how sad. When it gets to this part, whatever DVD or CD in the drive at the moment is read and autorun pops up(i once tried to burn it that way, failed) The MR Fix it will exit and say no problem was found.
Tried CDgone also.I deleted the uppers filters/lowers filters...i even got angry and deleted them ALL and had to do a system restore to get my PC back to working again...I am sorry if a solution for this is somewhere on the forums but i just could not find it...
Windows 7-64bit 4GB Ram PLDS DVD+-RW DH-16A6S ATA DEVICE. 1TB WD Caviar Green HDD MagicISO/Disk ImgBurn Roxio 2012
What would cause a CD drive to be unable to read a CD it used be able to. Its DVD. Its driver working but may not be newest and the CD won't read shows it being half full but can't get to files how ever it reads other CDs fine. For sure it read just fine before dunno went Web site no new CD drivers. Is there difference between windows versions?
my DVD writer suddenly stopped reading and writing DVDs and CDs, however there is power to the dvd drive, all the connections are working and i can eject the drive using windows explorer. Any advice an what to do.I all ready used Microsofts Fixit application but it said that the problem could not be fixed.
For some reason my dvd drive is not reading discs. It has been working before, and now it doesnt seem to read any discs i put in the drive. It also doesnt make any noise or any sign that it is in. My problem is is that the dvd drive isnt recognizing the dvd's i put. Even if if put a disc in the drive the D drive says that there is no discs inserted when there is. I am not sure if this is a hardware or software malfunction. I have tried:
1. deleting MousePoint2 in the registry and restarting.
2. uninstalling my cd/dvd drives then rebooting
3. deleting the upper and lower files in the registry or whatever that was
when the drive was working i remember leaving a disc in the drive then shutting down the computer.
My specs are
Windows 7 ultimate 64 bit service pack 1 Dell inspiron 620 intel core i3 3.3 ghz intel hd graphics family 6 gb ram
I had my computer for 3 months and the dvd drive isnt working is this normal that i have to replace the dvd drive?
I'm not a newbie when it comes to PCs either, I build my own and repair/troubleshoot others.
For some reason, my computer stopped reading DVDs in the drive. CDs load fine and I can burn to them. I checked the hardware properties and somehow Windows has decided to install a CDROM driver to the device, which is why I believe DVDs are no longer being read. I've tried going through and uninstalling the driver and getting rid of the registry keys assosicated in order for the correct driver to be installed, but Windows keeps installing incorrect ones.This just happened a few days ago, tried restoring Windows to a week ago and same problem exists. Less than a month ago I used it to install Diablo 3 so I know it works fine.
I have a WD5000D032-000 pocket 500 Gig. It worked on my vista 32 bit home. I updated to windows 7 home premium 64 bit edition and now my computer can't read it. It is displayed under Device manager just not My Computer
There is no upper and lower filters on my laptop and also the dvd icon is there on my laptop but it doesnt read any dvd or cd or any data from dvd drive.
My new computer arrived today with Windows7 64 installed. (happydance)My old computer has Windows7 32 installed.Before I start attacking both computers, thought I better ask beforehand or the b/f will 'kill' me..Can I remove the hard drive from the old computer, install it as a 2nd drive in the new computer and be able to access all the data (documents, photos, messages saved in outlook and my favourites etc) on it from the new Windows7 64bit primary drive?
after reinstalling Windows 7(using USB) dvd drive does not appear in "My computer" anymore(Can't find it in Device manager it either). In addition when my notebook is booting I get DELL's warning that some drive can not be identified(and it does not state which), so I have to press Esc to skip that warning so I can successfully boot my windows 7 up.
My notebook's dvd drive don't inject any CD's/DVD's anymore. Seems like dead after reinstall.
I have hp g42 laptop and all of a sudden the dvd drive stopped working. my drive was working fine two days ago.The light on the eject button is also off.I think that it may be a power problem.
I have had an expensive time with my computer recently but i am now beyond the brink and turning the tide of war to my favour.I have recently kitted my ailing PC out with a new SSD for the OS install.This is working great; i have just tonight had to plug in a brand new GFX card for my gaming pc.(My GFX card burned out due to overheating, so i have now got a new case and proper cooling)Basically, my secondary hard disk (Files Storage etc) is not working, when plugged into my sata port my computer hangs at the Windows Loading screen, also i cannot get into the BIOS.If i unplug the hard drive (Not SSD, 500GB Hitachi) my computer boots in 14 seconds, and the bios works fine.I have concluded my secondary hard disk may be broken.if i can fix it as i can barely afford to buy a new one (even knowing they are cheap).Basically if it had broken i would expect my PC would say so, seems to me that it is just waiting for a response and sitting around for hours to get it
I'm a bit kind of desperate now. I purchased a 2TB Western Digital Sata drive (WD20EARS) and an enclosure with USB2 and eSata interface (independent power supply).Everything was ok for almost 2 months till today it just suddenly stopped being detected at all.I wasn't doing anything in particular when this happened. I remember I restarted my laptop around the time this happened (I do not remember if it happened before or after this)When I attach it with the eSata cable, nothing happens. With USB, I hear the beep that "something" was attached but then again nothing. Nothing at all in Device Managre or Storage Management.
I just received my new WD Elements 3TB External drive and at find it worked fine and I was copy files to it and it seem to of froze and the files stopped copying (using TeraCopy) so I pressed cancel to stop the transfer and it wouldn't stop so I just unplugged the drive and now it doesn't show up in windows anymore. I went into Disk Management and it shows up but i cannot do anything to it. The Initilize disk pops up and I click GBP and it fails and says Media is write protected.
If the BIOS setting for the hard drive controller is AHCI it will not recognize the drive. (This was the default setting in the BIOS), If changed to IDE mode it recognizes the drive but come up with an "No operating system detected" message. If the hard drive is installed in a second lap top it works fine. If another hard drive is installed it works fine in AHCI mode. Only the combination of the original hard drive and the original lap top wont work.
My Seagate GoFlex 2 TB USB 3 drive has suddenly stopped working. When it happened, I was having many issues with Windows (for about 10 minutes and 3 reboots). It seems to have calmed down now but I am still having problems with USB devices. When I plug the external HD into the top USB ports (next to the wireless dongle for keybd/mouse), the keyboard stops working. In the system error logs I am getting this critical error: The driver DriverWUDFRd failed to load for the device RootSIDESHOW000. I am also noticing that I have an unknown device in my device manager. I am also having a message come up when I start the computer saying that Windows cannot connect to the Group Policy Controller. It says that it is timing out. [code]
I have a Windows 7 Laptop which i bought in January, at the same time i bought a WD 2TB external hard drive to back up all my files onto (last laptop broke and i lost everything so decided to keep everything off the laptop itself).
I am not able to access the HP v220W 16 GB Flash Drive is not working in my Windows 7 system it says " Windows has stopped this device because it has reported problems (Code 43)"
