DNS Error That Won't Fully Load Anything Or Open It Right
May 29, 2011
I have a HP G61 - 336NR Notebook and a Belkin wireless router. I keep getting DNS errors every single day. And its nonstop I have to sit here and refresh google like 10x just to connect to it. I have set my DNS manually to Open DNS and still no luck I've called my ISP and my Router company and still nothing. Sigh my laptop isn't the only one that can do it. I've done various restarts/factory restores and still doesn't work..
View 6 Replies
ADVERTISEMENT
Jun 5, 2012
I'm working on a neighbor's computer that had a number of viruses on it. I ran four different virus scanners that I placed on a boot DVD to get rid of them but it appears that the viruses may have roughened up the registry. The computer is an IBM Lenovo model A55 ThinkCentre with Windows 7 Ultimate installed. What is happening is after you click on either the Administrator or User icon to log in, you get a black background for a desktop, a mouse pointer, and a task window but nothing else. I have to close explorer.exe and re-load it in order to get Windows 7 to finish loading. Once I do that, everything appears fine except for the fact that I can't get any windows updates. I installed Comodo security suite offline from my thumb drive but it won't update either. I have already tried downloading and running the Windows 7 update readiness tool which says everything is fine with the registry. I then downloaded and burned a copy of SP1 from my computer to DVD and tried installing it but after the reboot, it says there was an error and couldn't complete and then gives the following code.... 0x800f0826.
View 9 Replies
View Related
Jan 7, 2013
and my sidebar only has lines . On google CHROME facebook works.Also I get a message saying hotkey has stoped working. Says doyou want to fix online but nothing happens.Went to Hotkey utility and you can't repair it..... only uninstall it.Hope I haven't deleted something I shouldn't have. I did systen restore and that doesn't help.that their is a black box with a red line where my clocketc on my desktop where it was. Tried putting them back on but just get the above.
View 9 Replies
View Related
Jul 5, 2011
Up to now I have found win 7 faultless but I can't find a work around this one.I have tried to load sp1 quite a few times and every time it gets to approx 15% loaded it reports it can't go any further and reverts back to previous settings.When windows loads up there is an error message "ERROR:error_sharing_violation(ox80070020).
View 6 Replies
View Related
Jul 21, 2012
it crashed and shut down , when i went to start up again it gave me this info:windows cannot verify the digital signature for this file.I have used the windows 7 start up disc and get to repair but, i get cannot repair automatically.show problem signature 01:
6.1.7600.16385
02: 6.1.7600.16385
03: unknown
04: 12
05:external
06: 1
07: missing Osloader
I have also used to CMD prompt bootrec /fixmbr bootrec /fix boot and bootrec /rebuildBCD to no avail.
View 5 Replies
View Related
Dec 13, 2009
When i first installed xp,vista and then Windows 7 This Game(Urban terror) always worked but after a while it stopped working giving me this error.
View 2 Replies
View Related
Oct 10, 2011
I am getting error 0xc00000a5 when trying to load skype. It appears it is pulling up the file location: C:ProgramDataSkypeAppslogin when clicking the login button. I am running windows 7 home premium. it is not running in compatibility mode. I have tried it both in compatibility mode and in non compatibility mode.
View 2 Replies
View Related
May 2, 2011
PC: Hewlett Packard P6360UK (Product # WE170AA-ABU)OS: Windows 7 Home Premium 64 bit SP1 Build #7601When any of the users of my home PC logs on, three warning popups appear. The two warnings associated with IAStorIcon.exe (related to Intel Rapid Recover Technology - part of Intel Matrix Storage Technology) and KiesHelper.exe (related to Samsung One-step program for managing mobile devices) are:c:WindowsMicrosoft.NETFrameworkv4.0.30319mscoreei.dll could not be loaded The warning associated with MOM.exe (part of ATI Technologies Catalyst Control Center) reports a different filepath(Framework64)c:WindowsMicrosoft.NETFram... could not be loaded I don't know whether or not I am losing any functionality or performance as a consequence of this error but, at the least, it is irritating to get these popups every time.
View 6 Replies
View Related
Dec 30, 2011
This morning I powered up my PC and got this error, 1234F:
Tried pressing 1 and nothing happened. Restarted and tried to get into the BIOS by pressing DEL, but the BIOS wouldn't load. Opened up the computer and unplugged all my hard drives and unneeded USB devices. Got into the BIOS fine after that. Powered down and reconnected the boot drive and everything booted up fine. Ran a quick test on the hard rive using the Seagate Seatools utility and it passed. Reconnected the other drives and again, everything checked out fine. I hope to run longer tests on my drives later this morning just to make sure.
I did have a Ubuntu live usb stick plugged in, but I have this plugged in often and have never had a problem. Tried recreating the problem by reconnecting everything and restarting but everything booted up fine.
The only things I have done to the PC is swap out two internal hard drives two days ago. I also have been having problems with my USB ports which I haven't figured out yet, this will probably be the subject of another thread!
So everything seems to be running fine now but I am a little worried about what might have caused my problem and if it is an indication of another problem? Is there anything I need to check?
Windows 7 SP1
Intel Core i7 930
12gb Ram
Asus p6t deluxe v2 motherboard
Nvidia GTX-260
XFX 650w PSU
View 2 Replies
View Related
Nov 18, 2012
I've decided to try and format my laptop today, however I have a frustrating error that keeps occurring and I don't really know what to do.I have an ASUS U43JC laptop. When I purchased the laptop, it didn't come with any CD/DVD's. I've tried to install some of the drivers from the ASUS website, with some of them saying I needed to download the x64 version because what I had downloaded was x32 (even though I'm pretty sure I downloaded the x64 file...).
There's one file that I had downloaded, yet I'm not sure what to do with it; it's called U43Jc.216. Anyhow, this is the error that pops up when I'm trying to reinstall Windows 7: "A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD or USB flash drive, please insert it now." If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step.
View 1 Replies
View Related
Jul 3, 2009
virtua tennis 2009 error on load up, every time i go to load this game i get error message.
View 6 Replies
View Related
Jul 11, 2011
I was checking emails today and I got a blue screen of death on Windows 7. I didn't take a screen capture, however the error message had to do with winSys32.exe, and then the usually memory dump messages. I rebooted into safe mode and tried running Spybot, but it came up with an error, so I downloaded and ran Malwarebytes anti-malware. It found 5 problems and I deleted them. I then ran Avast and it found no infections. Figuring it was a malware problem, I rebooted. Now Windows won't load. It gets to the Welcome screen, then goes to a blank black screen, with a mouse cursor. The cursor can be moved. I powered down the computer, pulled the battery, and booted it back up. This time I got a black screen, saying my disks had to be checked for inconsistencies. I ran the scan and it found no errors. Windows started to load, then stopped at the blank black screen again. I have my laptop set up with Ubuntu 11.04 on a sperate partion and I have not any problems with it, so I think the issue is related just to Windows, not hardware. My laptop is an Asus g72g, with an Intel Core 2 duo processor @ 2.53ghz, 6 gigs of ram and an Nvidia graphic card. Other then adding Ubuntu I have not done any upgrades to the system. Windows 7 was a installed at the factory, not an upgrade, and I haven't added any software in 6 months or so.
View 4 Replies
View Related
Nov 27, 2009
Went into the Windows 7 control panel to make a 'system repair disk' (boot disk), just in case I ever needed it. Making the disk went OK, with Windows 7 telling me it had successfully finished, and to label the CD.
I then put the boot CD into my DVD drive to make sure it worked OK. Computer boots from the CD and Windows 7 says it has started loading files. Then the pretty blue background screen started (just like the one in the F8 repair console), and then there was a long pause and then I get the error code shown on the photo below. Clicking OK reboots the computer, and no repair options ever load.
I made two separate boot disks to rule out a bad CD, but still get the same error #
This is a brand new Dell computer, both DVD drives work fine, and burn CDs without problems.
View 4 Replies
View Related
Jun 13, 2009
I have Win 7 on two of my machines, one is 32bit and the one I am using at the moment is 64bit. I have a rather unusual problem in that I can access my Router in FF on the 32bit machine (IE as well) but on the 64bit, Nothing
When I enter the IP address for my Router it just sits there and then comes up with a Page Load Error? this happens also in IE8. I have turned OFF the firewall, all the settings are the same in both machines, except the IP adress of course .
View 6 Replies
View Related
Dec 19, 2009
tracking down and getting rid of things that cause error to appear in event log. one of the few left is the rx filter failed to load issue. seems to be due to roxio program somehow and perhaps related to 32/64 bit issues. suggestions or ignore?
View 1 Replies
View Related
Jan 9, 2013
trying to install windows over Ubuntu , error cannot load
View 1 Replies
View Related
Sep 21, 2009
An error message has been bugging my lately, rather since I started using programs which use the remote access connection manager. One of them is songbird (the fire-foxy media player) which cannot listen to shared music, and SecondLife which uses it to make http calls, both of which make up pretty major parts of my day to day.
The actual error reads: "Network Connections
Cannot load the remote access connection manager service.
Error 711: the operation could not finish because it could not start the remote access connection manager service in time. Please try the operation again."
I found this weblink on microsoft support which explains that windows is stupid and I should load the following dependent services manually.
Telephony
Remote Access Connection Manager
Remote Access Auto Connection Manager
Telephony on my computer is already running, the Remote Access Auto Connection Manager depends on Remote Access Connection Manager, when I try to start the Remote Access Connection Manager service I get the error message: "Services Windows could not start the remote access connection manager service on local computer.
Error 1068: The dependancy Service or group failed to start."
The Remote Access Connection Manager depends on Telephony (already running) and Secure Socket Tunneling Protocol Service. When I try to manually start the Secure Socket Tunneling Protocol Service I get the following informative message: "Services
The Secure Socket Tunneling Protocol Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
View 9 Replies
View Related
May 3, 2012
It says:Engine.exethe exception unknown software exception (0xc0000417) occurred in the application at location 0x08f4f79c
View 3 Replies
View Related
Nov 24, 2009
when i try to connect on the network i found this message in front of me
''error 711 (cant load Remote Access Service Connection Manager)''
View 2 Replies
View Related
Apr 11, 2011
trying to play hoyle from disc , used to have no problem but now get cannot, says win 32 error.
View 1 Replies
View Related
Jun 19, 2012
I edited a 2 minute piece on AVID Express Pro. Downloaded the piece to a Sn Disc and took it to another PV that runs Windows &...I've tried to upload the video to You Tube and get the "no disc" error. The computer that I used to create the video is operated by Windows XP.
View 3 Replies
View Related
Dec 15, 2012
Ran Windows Update on wife's computer today (Biostar A75-MH mobo, AMD A8-3850, 8Gb DDR3-1600, 64Gb Samsung 830 SSD boot drive, Win7 x64) and upon restart it froze at 35% installing the updates. After it did nothing for 30 min I rebooted. It boots to the desktop but with an error box saying failed to load sortbls.nlp. Explorer isn't working, can run any programs, Start menu won't come up, just sits with the blue circle spinning. Tried to run system restore but the 11-15 one disappeared from the list when I tried to run it and now just shows the only restore point as Windows Update Critical Update from today which fails. Startup Repair says no problems.
View 3 Replies
View Related
May 15, 2009
I have used Windows 7 build 7057. But in that I was having problem that it keeps giving error 711 (cant load Remote Access Service Connection Manager) whose soln provided on net doesnt work as 'secure socket tunneling protocol' service starts and stops automatically and other services are dependent on it. So the only soln is to reinstall windows. So I switched to XP again and this problem doesnot occur in it.
Now I wasnt to ask that was that some build related problem or other coz i want to install Windows 7 RC now. If anyone have soln to that problem than plz provide it.
View 1 Replies
View Related
Jul 23, 2012
yesterday i was watching a show on my computer (sony vaio) and it kept freezing and lagging and wouldn't restart so i manually restarted it. when i tried to turn it on it would say "starting up windows" but it would take to long and it would restart again with error repair. when i would load error repair it would say it's loading files but only a background screen would show and no files.
View 7 Replies
View Related
Dec 16, 2012
Every time I boot up I get an error message that says, 'failed to load branding configuration'...what can I do
View 2 Replies
View Related
Apr 1, 2012
I want to remove my optical drive (ASUS dvd/rw) as I never use it, however after I disconnected it Windows wont load. It begins to load and then flashes a blue screen and restarts. If I plug my optical drive back in everything is boots up fine. how I can remove my drive and still be able to boot?
Things I have tried (with no success):
- Disabling and uninstalling the drive from the control panel
- checking boot priority (SSD is my boot drive), optical drive is now completely removed from boot sequence in BIOS (it was 3rd)
In windows repair (following the restart from blue screen) I found this:
Root cause found recent driver installation or uprgrade may be preventing the system from starting Repair Action: system files integrity check and repair Result: Failed Error Code: 0x490
View 1 Replies
View Related
Nov 8, 2012
i have 6gb ram ddr3,but win7 shows 3.4 only usable.what can i do?
View 4 Replies
View Related
Feb 11, 2011
I'm trying to get a Toshiba satellite L300D to start Win-7. It gives an error message:
"An error occurred while attempting to read the boot configuration data"
Not really sure what that means, but my guess is thats a file that it isn't finding. My pic isn't very clear, the Status is 0xc000000f, again not sure what that means. This machine has been running and well behaved for a long time.
View 8 Replies
View Related
Jul 27, 2012
I was watching netflix when randomly the internet window closed and ventrilo closed in the background. Then the computer shut off, much like if you restart the computer and the windows close. This time though it did not ask me to close any of them before it shut off. Then when I went to reboot my computer it got past the bios and some intro screens but then just got hung up on a black screen with a blinking cursor. It never reached the boot menu. It is seven 32 bit.
View 6 Replies
View Related
Sep 30, 2011
When I attempt to shut the computer down (Windows 7 Ultimate x64) it hangs at the Shutting Down screen... for hours... never actually shuts down. After 20-30 seconds there is no disk activity, so I just power it off or reset it and it's fine. Because of this method I worry about losing one of my disks, having already lost my backup storage disk as a result of this issue. In troubleshooting I have done the following: *Logged all the way out of all profiles and then with no one logged in clicked on shutdown, but I have the same issue, so I am thinking that it is a SYSTEM process that is causing the hang up. *Briefly checked Event Viewer and didn't notice anything. *There was a Microsoft FixIt that I applied that was related to this, but it did not fix the issue (can't remember the KB article number). So, I was hoping that someone could give me some advice on a good program or batch file to run that will do a good job at logging events during the shutdown process. Obviously Windows itself does this, but I was thinking more along the lines of logging specific Services as they are stopped.
View 1 Replies
View Related
Oct 9, 2011
My laptop will not turn on fully, the power comes on then immidately goes out why? what do i need to do what what might be the cuase of this?
View 4 Replies
View Related
