Connectivity Lost After Windows Update?
Jan 22, 2013
I recently did a fresh install on my gf's computer as it was suddenly unable to establish an online connection. The error showed in the connection status as the small yellow warning icon at the top left of the connection status icon, not the big red X that appears when the machine isn't connected at all.
Here are the specs:
OS: Windows 7 Ultimate x64
Mobo: Gigabyte GA-X58A-UD3R Rev.1
CPU: Intel i7 950
RAM: 12GB Corsair Dominator GT 2000mhz
The system is also not overclocked.
After trying many things (reinstalling network drivers, flushing DNS, trying a different ethernet cable, restoring all network settings to default) I gave up and did a fresh installation.
After installation, I installed all the usual official drivers, then performed a Windows update, but only the important updates. The connection was back! I then decided to install some optional stability updates, and after reboot, the network problem was back.
I did a system restore to before I installed the optional updates, but the problem persists. I have no idea which optional update is causing this, or which one to remove first to avoid creating more errors.
View 4 Replies
ADVERTISEMENT
Dec 21, 2010
I have Windows 7 on a Dell Inspiron 1545. Most of the time when I put my laptop to sleep and restart it Wifi network connectivity is lost and I have to click the 'Wifi Signal' icon in the system taskbar and click on my network name and click connect to regain connectivity. I have gone to 'Power Management' tab and cleared 'Allow Windows to turn off this device to save power' option as suggested by most posts but it has done nothing to help me. But sometimes even after a long sleep the laptop immediately connects back to the network and sometimes even if I just close the lid and open it after a few seconds network connectivity is lost.
View 15 Replies
View Related
Nov 1, 2011
I had my HTPC up and running last night, watched a movie, turned it off and went to bed. When I woke up this morning I found that I couldn't get any sound while playing videos through my web browsers, thinking it might be a video card issue I first checked some of my movies, but they also wouldn't play with sound so I deleted my nvidia files and reinstalled them. No luck, on one restart I lost my internet connection with my router. If I look inside the Buffalo's settings, I can see my HTPC's IP address (after running ipconfig /all on the htpc) I did a system restore but that didn't work. I even went so far as to do a clean install of Windows on the HTPC, but that also didn't work. I keep getting the yellow triangle and the message "unknown network" The HTPC tells me to check my router, which I have restarted a number of times unplugging the cable modem and the Buffalo. Turn on the cable modem get it online, then plug in the Buffalo, but nothing works. I have tried switching ethernet cables, ports, but no luck.
View 3 Replies
View Related
Nov 1, 2011
I had my HTPC up and running last night, watched a movie, turned it off and went to bed. When I woke up this morning I found that I couldn't get any sound while playing videos through my web browsers, thinking it might be a video card issue I first checked some of my movies, but they also wouldn't play with sound so I deleted my nvidia files and reinstalled them. No luck, on one restart I lost my internet connection with my router. If I look inside the Buffalo's settings, I can see my HTPC's IP address (after running ipconfig /all on the htpc) I did a system restore but that didn't work. I even went so far as to do a clean install of Windows on the HTPC, but that also didn't work. I keep getting the yellow triangle and the message "unknown network" The HTPC tells me to check my router, which I have restarted a number of times unplugging the cable modem and the Buffalo. Turn on the cable modem get it online, then plug in the Buffalo, but nothing works. I have tried switching ethernet cables, ports, but no luck.
View 8 Replies
View Related
Oct 13, 2012
The wireless adapter does NOT appear in ipconfig! but Ethernet does.Ethernet works properly.Unable to rollback/system restore as all deleted (don't know how or why).There is no wireless connectivity and with a USB wireless adapter the same problem. Hardware installs and says working OK, but unable to connect to wireless also.
Ipconfig is:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Jabberwocky
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
View 1 Replies
View Related
Feb 27, 2011
On the right hand side of the taskbar I have the icons for battery life, volume, internet connection, etc. When I used to put the mouse over the internet connection it would show me who I was connected too (SSID) , signal quality, and speed.I began having some issues so I had to remove my Netgear connection and then reconnect.Ever since I did this all that shows up now when I put the mouse over it is now only says: Netgear and Internet access.How do I get the information back. It shows up on my desktop, but not my laptop.
View 7 Replies
View Related
Feb 17, 2012
I had Windows 7 32-bit running on a Dell PC. About one week ago, I noticed Internet connectivity was gone and that there was "limited connectivity" as I was now connected to an "unidentified network". The other systems on the network are still connected and working perfect; the problem is isolated to this one system. The network uses a static IP scheme. "IPCONFIG /ALL" shows that the IP is assigned, is included on the correct subnet and has the correct gateway and DNS information. I've tried a host of solutions suggested on forums; from "route delete 0.0.0.0" to disabling my firewall to configuring for a dynamic IP. Nothing has worked. Reluctantly, I resorted to a fresh install as I began to worry that I may have picked something up. I completely wiped the hard drive and did a fresh Windows 7 32-bit installation all only to have the same problem. I assume that the NIC is functioning as it accepts all IP settings.
View 1 Replies
View Related
Aug 13, 2011
Lost favorites with Windows update
View 1 Replies
View Related
Oct 30, 2010
I seem to have lost admin rights/privileges on my account, even though it says I am an admin. I can't use windows update because of the following message. UAC is off. I created another account and swapped admin privileges to that, and everything was ok, but as soon as I swap the privileges back to my original account, i get various 'this action requires admin rights' etc. I don't want to keep logging into another admin account just so I can use windows update.
View 7 Replies
View Related
May 28, 2012
So my son was in the middle of one of his blood bowl league games this evening and a popup asked him if he wanted to install a Windows 7 update. He's only 12 and inexperienced enough that he didn't just tell the system to wait a few hours until he could finish his game, so he told it to go ahead and instal. The result was his near-instant loss of internet (as well as his game, as he was timed out and his opponent got the win).
Even more serious, after the update was finished and his computer was restarted, he still cannot get an internet connection. I've tried rebooting, complete shutdown and then reboot, and asking the computer's internet tools to diagnose/fix the problem, all to no avail.
I read about running a system restore (restoring to an earlier version of windows), but when I tried I learned that that aspect of his system had been shut off.
I know there must be SOME way to fix this problem, but I can't think of what it might be. Even if the problem is due to the new Windows version, he has no way to download a fix for it because he has no internet connection.
View 11 Replies
View Related
Nov 20, 2012
I did an update and got a BSOD. Message said "Check disc"' After completion, all my programs and settings are lost. I have done Acronis backups, but they are gone. I tried to do a restore, but only date it gives is today's. Can I use the Windows 7 disc to do a repair or will I have to do a complete re-install? Also, after screen came back, I kept getting a "Windows Validation Failed" even though I clicked Validate online and it said "Validation complete".
View 14 Replies
View Related
Nov 30, 2012
I wanted to install more RAM, but Supermicro support told me I needed to update BIOS (flash it) to enable it to accept higher RAM.After I did this, the BIOS seems to have lost the record that boots my Windows 7 installation. After going through the checks, it just comes up with "Operating System not found."So I thought that, since I have two SATA drives, I could try installing Windows on my redundant disk to see if that might generate a dual boot menu.I was able to successfully install a fresh copy of Windows on the 2nd disk, but it will only boot into that one. It seems my system has completely forgotten about my other, working, installation.Is there a process for recovering the boot information and setting it up such that I can go back to using my other installation?
View 2 Replies
View Related
Apr 8, 2011
I have a ipod touch and a toshiba laptop running win 7. I recently got an email to say that the latest version of the touch software is available. I clicked through and downloaded the update All was well, all music, video apps etc all as before. Pictures however have all gone! further more they have gone from the mypictures place on win 7!
I have tried rolling back the update, system restore etc but no joy. I can still see the shortcuts to the picture folders in recent places but cannot access the pictures.
Im not sure if this is an apple issue or a windows issue ill timed? Does anyone have any advise of how I might be able to access these pictures again? Ill try anything and of course i dont have a backup! (no one buys a house alarm until you get robbed!)
View 2 Replies
View Related
Jun 21, 2012
If I install the update, I lose my complete e-mail address/contact list. If I don't install the update I can't open my Live Mail at all. I miss Outlook Express SO much! I'm a senior and I don't need Live Essentials bells and whistles.
View 9 Replies
View Related
Jul 23, 2012
I lost a couple of parts of my Asus P7P55D Deluxe motherboard after a lightning storm. The board still works, but I lost the audio and the Ethernet ports. The closest replacement that I could get was the P7P55D-E deluxe (note the added -E). Lost the x4 PCI-E slot in that swap, but I'm not using it anymore. The system booted immediately with the new board and the old OS. But after I installed all of the drivers for that board in the Asus site, I lost the ability to safely remove SATA drives. Not only don't the internal drives show up, as they used to, but when I add a drive to one of my hotswap bays, it can't be stopped, either. The bays are attached to the southbridge ports, which have been set to AHCI mode.
My best guess is the Intel Rapid Storage Tech drivers. Installing these put an icon in my icon corral that continually informs me that the RST service is not started (even though Services shows it as running). I'm planning on falling back to my most recent OS backup, testing that I get the safe removal icon, and adding drivers one at a time until it goes away. Then blame the last driver.
View 3 Replies
View Related
Nov 1, 2009
Installed Windows 7 on two home-network computers. Everything appeared to be good, including networking, but I could not access printers (linked through each computer) with the opposite computer. Windows update offered an update for the Broadcom 802.11n network adapter, but when I installed the update I completely lost the network.
I had to revert to the old driver in order to reastablish the network. But the printers still are not recognized. The network adapter on the secondary computer is a Linksys WMP300N. I did try turning the router off for ten seconds with the updated driver but that had no effect.
Anyone had this problem?
View 0 Replies
View Related
Jul 26, 2011
how i connect windows ce with an internet connection?
View 1 Replies
View Related
Sep 26, 2012
I recently downloaded updates from MS and since rebooting I have lost all wireless connectivity. When I ran ipconfig /all in a command window it shows ethernet connection but not wireless. In network it shows wireless card is connected but there is no TCP/IPv4 or 6 connectivity. I am using Intel(R) WiFi Link 5100 AGN wireless adapter. I have updated to the latest drivers for the adapter but NO success!Diagnostic message is about windows not being able to bind to TCP stack etc.Tech Support Guy System Info Utility version 1.0.0.2OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bitProcessor: Intel(R) Core(TM)2 Duo CPU T6600 @ 2.20GHz, Intel64 Family 6 Model 23 Stepping 10Processor Count: 2RAM: 4090 MbGraphics Card: NVIDIA GeForce G 105M, 512 MbHard Drives: C: Total - 464838 MB, Free - 82861 MB; E: Total - 381554 MB, Free - 171085 MB; F: Total - 2861578 MB, Free - 510054 MB; G: Total - 476939 MB, Free - 64575 MB;Motherboard: Packard Bell, SJM50MVAntivirus: BullGuard Antivirus, Updated and Enabled
View 14 Replies
View Related
Jun 3, 2011
A friend has Windows 7 purchased last November but has not had on internet yet. Could get an ip address, but not connect. Had yellow warning icon. Had Norton icon but was not installed, most likely came with purchase. Also had problems connecting with ipod wirelessly. Could connect with Vista PC.
View 5 Replies
View Related
Feb 23, 2011
Several users are getting a delayed response when trying to open a network drive. There are several instances where it would take 15-30 seconds to open a network drive.Also users are having issues saving a document, receiving the error message "access denied you do not have rights to do this" seems like the network connection is breaking at some point to making the computer think there is another copy open.What I've done so far:
latest windows updates
latest word processing and client updates
View 1 Replies
View Related
Mar 23, 2012
I am having an intermittent problem with my network connection dropping out for no apparent reason.When it drops, I still see the lights blinking on the NIC card, but cannot pass packets even to the router.Windows does not report the connection or the cable as disconnected when this problem is occurring.The problem will persist until I disconnect and reconnect the CAT-5e wire, or disable and re-enable the NIC.As soon as I do one of those 2 things, connectivity immediately returns (and works for another hour or so).I am running a legitimate copy of Windows 7 Home Premium 64-bit on an HP Pavilion.All of the latest Windows updates and the latest firmware drivers are installed. My ethernet connection is a wired Local Area Connection with a static IP address, gateway and DNS.The IP address, gateway and DNS settings are accurate and work for several other computers here.
The Network Interface Card is a Realtek PCIe FE Family Controller (VEN_10EC / DEV_8136 / REV_05).NIC Power Management, Energy Efficient Ethernet, and Link Down Power Saving are all turned off.On the NIC, ARP/Large Send/IPv4,TCP,UDP Checksum/NS Offload, Flow Control, and are all on.Receive Buffer Size on the NIC is 64Kb (512 buffers). Receive Side Scaling on. 128 Transmit Buffers.Interrupt Moderation is turned on. Magic Packet features are turned off. Optimal Performance enabled. [code[
View 1 Replies
View Related
Jul 15, 2012
I have a HP Touchsmart 300-1060a (Home Premium Windows 7 64 BIT) which I bought few years back. Now for the last 6 months or so I started getting issues with my machine was not displaying anything at all after turning it on. So I had to hard reset my power from the machine and then was able to see it started displaying again.At first I suspected graphic card (NVIDIA GEFORCE) but then I did my diagnostic test and nothing was found.One day, I started re-imaging my machine as a fresh and then after this it never came back ONLINE. I read all HP forums & even HP Online support was unable to help me to find the cause.Because when I turn on my machine I can see the power light was on and could hear big fan noise but mo HDD activity at all.So at this stage, I suspected either motherboard or BIOS but wasn't 100% sure what could be the real cause because I was sure it was not due to graphic card.So first I re-setted by my BIOS to see if it helps but it didn't came up at all. So then I took my machine to a Computer repair shop (a friend of mine) and we detected it could be due to the regulator which supplies power to the CPU and motherboard.So we replaced that part and now my HP Touchsmart is running fin since then.But I have lost my HP Startup logo with options such as below: [code]
View 4 Replies
View Related
May 7, 2012
I have 2 PCs connected to my router. One has no issues whatsoever. The other, carrying windows 7 shows "limited or no connectivity" every 1 or 2 hours. This is resolved by rebooting. I think this only happens when using bit-torrent. Not 100% sure though. I read some posts saying that disabling "Receive Side Scaling" will work. It's found in : Local Area Connection>Properties>Configure>Advanced>Receive Side Scaling>Set to "Disable". The problem is that my machine doesn't have "Receive Side Scaling" there ...
View 4 Replies
View Related
Apr 6, 2011
I'm trying to fix my sisters laptop, which just wont connect to the Internet. I've checked everything I can find. Here's a description of the problem - When looking at the icon in the system tray that shows the connection bars, when I hover over it, it says "not connected - connections are available" . On the related pop-up window It does show my wireless connection. When trying to connect to that wireless network, it eventually says "the connection was unsuccessful - this computer has limited connectivity to "bthomehub.....".
At this point it gives an option to troubleshoot, when I select this it says - "problems found - there might be a problem with the driver for the wireless network connection adapter". If I look at the troubleshooting report from this window it says "windows couldn't automatically bind the IP protocol stack to the network adapter". In 'network and sharing centre' it shows the computer being connected to the homehub, but no connection from homehub to the Internet. Attempted to ping ebay, got this response - "ping request could not find host ebay.com please check then name and try again."
Under wireless connection status it says -
"ipv4 connectivity - no Internet access"
"ipv6 connectivity - no network access"
From looking around on the internet I have tried the following -
- netsh winsock reset catalog
- netsh int ip reset reset.log
- reinstalled drivers for wireless network connection adapter
- checked that windows has no restore points
- tried ipconfig /release at command prompt, got the error "the operation failed as no adapter is in the - - state permissible for this operation"
- tried ipconfig /renew at command prompt, got the error "the operation failed as no adapter is in the - state permissible for this operation"
I tried removing various antivirus/system protection apps...at this point I then got a yellow icon over the connection bars in the system tray, and it now says im 'connected'. but it says 'no internet access'. Its a new laptop running windows 7, it did work fine for a while and then suddenly stopped working while connected to the internet.
View 2 Replies
View Related
Jan 14, 2012
m using toshiba satellite L640 when i try 2 connect 2 internet it keeps on acquiring network address and shows limited connectivity in windows 7 home premium..
View 1 Replies
View Related
May 4, 2012
I am having a problem connecting to the internet in a public library where all other laptop users are connecting successfully. The curious part of the connectivity issue (to me, anyway) is that according to my computer I AM connected to the network. I have provided some screen caps of the issue (links below), and tried to run the Intel ProSet Wireless Tools diagnostic to troubleshoot the problem of connectivity. The test run by my computer indicated that my Ping Test failed Response: Default Gateway, DHCP server No Response.
View 3 Replies
View Related
Jun 11, 2009
This has been an issue since I upgraded to 7201. It isn't constant, and seems to be worse when I'm downloading large files, especially multiple files from one source (like an album in iTunes). It is fixed by release/renew (or just letting Diagnostics do that).
If I'm not using a lot of data (regular web browsing, working on a database online, etc), it seems perfectly fine. It is holding so far downloading one track at a time on iTunes, but if I do 2, it drops the connection.
I'm using the Home network config, router is working normally, and I can't recall this happening before 7201. I've reset the router, upgraded firmware, and it only happens on this PC. I've set WINS, tried all settings for TCP/IP 4 and 6, and using the other ethernet port on my motherboard.
More of an annoyance, really, but I can't figure it out and it is bugging the hell out of me.
EDIT: I can still get 1 mb/s on a single download, but trying 2, I get 600/400 for about 10-15 seconds until it disconnects.
View 5 Replies
View Related
Feb 2, 2011
All of a sudden, my wireless adaptor went offline and I wasn't able to detect any wireless networks in the area..
View 1 Replies
View Related
Feb 3, 2012
I just recently purchased my Asus X53SV-MH71 laptop. For the first week I was able to connect to internet/wifi at my school perfectly fine. But now it keeps coming up as "Limited Connectivity." I've read some solutions over the web but none have seem to solved my problem. At this moment I am currently connected through an ethernet cable. If anyone can help me that would be great. I will provide the "ipconfig /all" cmd below.
View 1 Replies
View Related
Mar 5, 2012
I have a COMPAQ Presario CQ62-215DX Notebook. This laptop ran very well until the day its internet suddenly failed. When I try to connect to my WiFi connection, it says "The computer currently has limited connectivity to X". I tried troubleshooting, and it said there was a problem with my network adapter. I went to Control Panel > Hardware & Sound> Device Manager. From there, I disabled and enabled all of my adapters, but my internet was still non-functional. The problem isn't my router, because my husband and kids are connected perfectly. Is there a way to solve this issue, or do I have to get an expert to EDIT: I saw on a thread that I should try uninstalling and re-installing an updated network adapter, but how am I supposed to do that without internet?
View 4 Replies
View Related
Jun 14, 2012
I just recently ran in to an extremely frustrating problem with my laptop. I have an asus laptop, it's one of the gaming models. Just recently, it has shown that wireless connectivity is turned off whenever i boot up my computer. The thing is, though, that the manual switch to enable wireless connectivity is switched on. Whenever i attempt to switch it off, then back on, the graphic that pops up on your screen showing that wireless connectivity is disabled pops up even when i switch it on. It does the same exact thing when i use fn + f2, only the graphic saying that it's disabled pops up every time i press it, and wireless connectivity stays disabled no matter what. I have absolutely no idea what to do, this literally just happened out of no where when i booted up my computer yesterday.
View 5 Replies
View Related
