Lost Admin Privileges - Cannot Use Windows Update / UAC Off

Oct 30, 2010

I seem to have lost admin rights/privileges on my account, even though it says I am an admin. I can't use windows update because of the following message. UAC is off. I created another account and swapped admin privileges to that, and everything was ok, but as soon as I swap the privileges back to my original account, i get various 'this action requires admin rights' etc. I don't want to keep logging into another admin account just so I can use windows update.

View 7 Replies


ADVERTISEMENT

Admin Privileges Gone

Dec 7, 2011

After setting up the Christmas tree the other night our breaker was thrown. After starting Windows up I no longer have admin privileges. Worse yet, no user does. Also, from my log in screen only one user is shown (the previous admin account). If I type other users names and passwords I can access them.

Since I can't change anyone's privileges above my own, what do I do?

View 7 Replies View Related

Getting Around The Admin Privileges

Jan 28, 2012

I know what this sounds like. Before you ban or block or post some smartass remark, hear me out. I'm trying to get around an adminstrator password on my work computer so I can install a couple of useful apps. Before I joined the company, most of the computers were fairly open. About a year ago, they hired an empolyee who took advantage of this an installed personal liscense software on her work computer for work-related use. Obviously this is illegal and the employee was warned. The employee persisted and eventually the company locked the computers down so that you could not install without administrator privileges. This applied to old and new employees. I started about 2 months ago and was given a locked computer. Shortly thereafter the employee who caused the lock down policy left for another position. During this time I began experiencing issues with my computer. This person explained why the computers were locked down when I expressed that it would waste less of his time if the computer wasn't locked. He then said, "Of course you know that there is a workaround right? You just need a windows boot disk. Then you don't need the password." This was the wink, wink, nudge, nudge way of saying as long as you don't do something stupid it's unofficially ok. My question is, is this true, can I use a boot disk and not have to get an admin password to install a program? I'm not looking to install pirated software or software that I own a personal liscense for, I'm looking to install useful tools such as CPU-Z or something similar and to make enhancements such as increasing the page file size. If it's true, how do I go about it? Are there other ways to achieve the same ends?

View 13 Replies View Related

Getting Around The Admin Privileges?

Jun 7, 2012

want to install office 2007 on win7 , but as administrator I can not. it will run until it's says you do not have privileges.have set system to fullcontrol and also administrator to fullcontrol with the same response

View 6 Replies View Related

Admin Has No Sufficient Privileges?

May 3, 2011

A virus, downgraded all my Privileges even though I'm set as Administrator. In order to fix my computer, I first need to reset all Privileges back to their defaults. The first "solution" said to install "subinacl.msi", and then run a cmd batch that calls subinacl.exe. Problem here is that "subinacl.msi" attempts to install to the System32 folder... which I naturally no longer have permission to access. Catch-22.

The second "solution" said to use "Takeown" to retake ownership of specific files & folders. But I don't have "Permission" to run "Takeown" either from the CLI. The third "solution" says to create the "hidden" Administrator account via "net user administrator /active:yes", but (you guessed it), I don't have "permission" to do that either. How to get my permissions back?

View 9 Replies View Related

Changing App To Admin Privileges?

Dec 18, 2011

Im trying to make it so that my son has the capability to run a program using admin, and only that one program, is there anyway to do that so i don't have to constantly put my password in to allow him to play?

View 2 Replies View Related

Windows 7 Reinstall - Setting Default User Account As Admin With Privileges

Apr 3, 2011

I'm getting pretty good at reinstalling Windows 7 (Clean) - However I do have a question: What is the best way to set myself up as the Administrator so I don't constantly have to work around those pesky "You need administrator privileges to do xxx". I would think that even with setting my default user account as an Administrator, there would be a way to really be an Administrator.

View 3 Replies View Related

Running Computer As Someone Without Admin Privileges?

Oct 7, 2012

Sony Vaio laptop/Windows 7
Windows 7 Service Pack 1 x64 NTFS
Internet Explorer 9.0.8112.16421
Firefox 15.0.1
avast! free antivirus; Spyware Blaster free.

Also for non-real time protection but for a 2nd opinion, sometimes do a scan with MBAM or Super AntiSpyware.And after learning about it thru this site, currently doing a free online ESET scan, which the one other time I used it found junk that none of the other programs did.I saw an article stating that most problems involving keyloggers, trojans, scareware, etc., could be prevented by my running my computer as someone without Administrative privileges - that this would prevent most programs from being able to take control, even if I unknowingly clicked on a downloader for a trojan/keylogger.I am in the USA and interested in some non-USA sports, so use free streaming sites a lot which sometimes contain various types of malware.I try to be careful, but occasionally, as tonight, I have to do a System Restore when scareware gets a program into my computer.

View 5 Replies View Related

System Hangs When Asking For Admin Privileges

Mar 15, 2011

I have an annoying issue and it only happens about half the time my computer is turned on. When I run a program in "admin mode", the screen goes black and hangs for about 5 seconds, the prompt comes up asking me to approve, I click yes, screen goes black for another 5 seconds then the program comes up. This also happens sometimes when I wake the computer from the screensaver. I also happens when I try to open task manager. With the specs of my computer, there's no reason this should be happening. The computer is only 2 months old. I have run CHKDSK, did sfc /scannow, all are supposedly clean now. I checked my registry for errors, repaired those. Ran an AVG scan, also clean. My graphics drivers are up to date. All of my other drivers should be up to date as well. If I go into the device manager, there are no dreaded "!" icons next to any devices.

View 3 Replies View Related

Admin Privileges In Batch Script?

Jun 6, 2011

I wrote a Script that uninstalls an application, move some files and install an Application.The Script is working if I start it as Admin (right click - run as Admin ...).Everything works fine.But I want to have it working without the "run as".The script is only used in a separated Test system, so there is no problem if the Admin user name and password is in the script.(also link wouldn't work, should also work if it moves to another station within the test domain)

View 6 Replies View Related

Allow User On Another Computer Admin Privileges Over A Net

Jan 4, 2013

I'm trying to allow a user account on my win 7 home laptop admin rights on my win 7 professional desktop so i can send it admin level commands over command prompt and generally do more when file sharing.

Both computers have an account called "Me" on them with exactly the same password.
The computer running win 7 professional is called ME-DESKTOP, and the computer running Win 7 home is called ME-LAPTOP. I heard that setting the usernames and passwords to the same should work on some other forums, but i get the feeling that was referring to computers both running win 7 home, as it has evidently not worked here.

I think the problem is I've got to add \ME-LAPTOPMe to the administrators group on ME-DESKTOP but i can't find how to as when i try and add a new location it won't find ME-LAPTOP for me to select even though ME-LAPTOP has network discovery turned on.

View 3 Replies View Related

Lost Explorer.exe, Msconfig,adm Privileges

Sep 27, 2012

last 7 days can not use msconfig or explorer.exe also my computer icon does not responds, actually when I tried to use anyone of these commands the program "load" but only for milliseconds and back to the desktop; I tried many things like AVG and malaware both report no infections I use safe boot and run sfc/scannow and no solution?

View 8 Replies View Related

Lost Access To Admin. Files?

Dec 10, 2012

I accidentally changed my admin. permissions lost privileges and now I don't have access to my user files. I created a new admin. account and still cant find my old files.

View 2 Replies View Related

Lost Of Drive C Permissions And Admin Features?

Jul 26, 2011

I was on the permissions for drive C, because I didn't want standard user changing setting on there and when I clicked OK windows came up with an error and then when I tried to go back on to the permission change window it said " access denied" and I Now can't Change it back, I Can't do anything with admin features and I can't system restore.

Computer info:

Acer Aspire 5536
Windows 7 Home Premium

View 5 Replies View Related

Lost Photos Changing Admin Authorization?

Feb 24, 2011

I was not able to edit my photos and was sent a link to look at my authorization level of my user. I have one user ADMIN and it seemed to be authorized in doing everything.

Anyway I chose a file folder with recent photo clicked on properties and then went to advance ....anyway don't remember what I clicked the file disappeared and I have not been able to retrieve it. I retrieved some of the photos by going to recent activity and that was a folder with in the folder that is now MIA.

Is if possible these photos are archived?? I just have no clue why the folder with these photos disappeared and more importantly why I can't find them on my C drive anywhere. I am using a Sony Vaio all in one.

View 1 Replies View Related

Cant Access Root Drive - Lost Admin Rights

Aug 18, 2009

I installed Windows7 recently. I was changing permissions and accidently denied authenticated users to C drive. I was logged in as admin which is the only account. Now I cant access anythig in C Drive and cant execute any thing. I tried through safe mode as well but of no use. How can I regain access or reset permissions.

View 9 Replies View Related

Lost Admin Account After Reboot, After Changing Setting In Lusrmgr?

Aug 18, 2012

I lost my main user account, after rebooting machine, I did change a setting while in lusrmgr...[netplwiz]. now the lost account shows the name but no full name and/or description in snapin. I am left with just a guest account in Homegroup Users.

View 8 Replies View Related

Admin Account Cannot Access Contol Panel Or Windows 7 Update?

Sep 26, 2012

I have a problem with my Administrator Accounts in that I cannot access the below although I CAN access them from a Standard User Account?


1:When I try to start Windows Update (START / ALL PROGRAMS / WINDOWS UPDATE get the following: Application not found

2:When I wish to access ANYTHING from the Control Panel (START / CONTROL PANEL / anything in Control Panel) or try to access START / DEVICES AND PRINTERS I get the following: a long string of numbers

3:When I try to get to Default Programs (START / DEFAULT PROGRAMS) I get the following: another long string of numbers.

Did try to attach screen shots but didn't work.I can however access everything from a STANDARD USER account?I am running Windows 7 Ultimate N I would appreciate any assistance as the only assistance on the web is of no use as I have tried the limited suggestions without success and am totally at a loss now!

View 1 Replies View Related

Connectivity Lost After Windows Update?

Jan 22, 2013

I recently did a fresh install on my gf's computer as it was suddenly unable to establish an online connection. The error showed in the connection status as the small yellow warning icon at the top left of the connection status icon, not the big red X that appears when the machine isn't connected at all.

Here are the specs:

OS: Windows 7 Ultimate x64
Mobo: Gigabyte GA-X58A-UD3R Rev.1
CPU: Intel i7 950
RAM: 12GB Corsair Dominator GT 2000mhz
The system is also not overclocked.

After trying many things (reinstalling network drivers, flushing DNS, trying a different ethernet cable, restoring all network settings to default) I gave up and did a fresh installation.

After installation, I installed all the usual official drivers, then performed a Windows update, but only the important updates. The connection was back! I then decided to install some optional stability updates, and after reboot, the network problem was back.

I did a system restore to before I installed the optional updates, but the problem persists. I have no idea which optional update is causing this, or which one to remove first to avoid creating more errors.

View 4 Replies View Related

Lost Favorites With Windows Update?

Aug 13, 2011

Lost favorites with Windows update

View 1 Replies View Related

Lost Internet Connection After Windows 7 Update?

May 28, 2012

So my son was in the middle of one of his blood bowl league games this evening and a popup asked him if he wanted to install a Windows 7 update. He's only 12 and inexperienced enough that he didn't just tell the system to wait a few hours until he could finish his game, so he told it to go ahead and instal. The result was his near-instant loss of internet (as well as his game, as he was timed out and his opponent got the win).

Even more serious, after the update was finished and his computer was restarted, he still cannot get an internet connection. I've tried rebooting, complete shutdown and then reboot, and asking the computer's internet tools to diagnose/fix the problem, all to no avail.

I read about running a system restore (restoring to an earlier version of windows), but when I tried I learned that that aspect of his system had been shut off.

I know there must be SOME way to fix this problem, but I can't think of what it might be. Even if the problem is due to the new Windows version, he has no way to download a fix for it because he has no internet connection.

View 11 Replies View Related

After Windows Update Got BSOD - All Programs And Settings Lost

Nov 20, 2012

I did an update and got a BSOD. Message said "Check disc"' After completion, all my programs and settings are lost. I have done Acronis backups, but they are gone. I tried to do a restore, but only date it gives is today's. Can I use the Windows 7 disc to do a repair or will I have to do a complete re-install? Also, after screen came back, I kept getting a "Windows Validation Failed" even though I clicked Validate online and it said "Validation complete".

View 14 Replies View Related

Flashing BIOS Firmware Update Has Lost Windows 7 Boot Record?

Nov 30, 2012

I wanted to install more RAM, but Supermicro support told me I needed to update BIOS (flash it) to enable it to accept higher RAM.After I did this, the BIOS seems to have lost the record that boots my Windows 7 installation. After going through the checks, it just comes up with "Operating System not found."So I thought that, since I have two SATA drives, I could try installing Windows on my redundant disk to see if that might generate a dual boot menu.I was able to successfully install a fresh copy of Windows on the 2nd disk, but it will only boot into that one. It seems my system has completely forgotten about my other, working, installation.Is there a process for recovering the boot information and setting it up such that I can go back to using my other installation?

View 2 Replies View Related

Lost All Photos After Ios 4.3 Update - Link Still In Recent Places

Apr 8, 2011

I have a ipod touch and a toshiba laptop running win 7. I recently got an email to say that the latest version of the touch software is available. I clicked through and downloaded the update All was well, all music, video apps etc all as before. Pictures however have all gone! further more they have gone from the mypictures place on win 7!

I have tried rolling back the update, system restore etc but no joy. I can still see the shortcuts to the picture folders in recent places but cannot access the pictures.

Im not sure if this is an apple issue or a windows issue ill timed? Does anyone have any advise of how I might be able to access these pictures again? Ill try anything and of course i dont have a backup! (no one buys a house alarm until you get robbed!)

View 2 Replies View Related

Lost Email Contacts After Live Essentials Update

Jun 21, 2012

If I install the update, I lose my complete e-mail address/contact list. If I don't install the update I can't open my Live Mail at all. I miss Outlook Express SO much! I'm a senior and I don't need Live Essentials bells and whistles.

View 9 Replies View Related

Lost "Safely Remove Hardware" In Mobo Swap / Update?

Jul 23, 2012

I lost a couple of parts of my Asus P7P55D Deluxe motherboard after a lightning storm. The board still works, but I lost the audio and the Ethernet ports. The closest replacement that I could get was the P7P55D-E deluxe (note the added -E). Lost the x4 PCI-E slot in that swap, but I'm not using it anymore. The system booted immediately with the new board and the old OS. But after I installed all of the drivers for that board in the Asus site, I lost the ability to safely remove SATA drives. Not only don't the internal drives show up, as they used to, but when I add a drive to one of my hotswap bays, it can't be stopped, either. The bays are attached to the southbridge ports, which have been set to AHCI mode.

My best guess is the Intel Rapid Storage Tech drivers. Installing these put an icon in my icon corral that continually informs me that the RST service is not started (even though Services shows it as running). I'm planning on falling back to my most recent OS backup, testing that I get the safe removal icon, and adding drivers one at a time until it goes away. Then blame the last driver.

View 3 Replies View Related

Admin Password - Unable To Logon To Admin Screen?

Mar 13, 2012

I recently changed my logon password and now can't remember it - am therefore unable to logon to my admin screen

View 8 Replies View Related

Administrator Privileges In Windows 7?

May 13, 2011

I've searched a number of other forums, looked under Admin privileges in the search panel, checked through the other threads as far as I could, and checked references to Naturally Speaking but cannot find a solution to this problem. I'm not at all technical so will need word of one syllable aI had a local company build me a new computer. I installed windows 7 on the blank disc with just one single user (me) who was classed as administrator. Until recently it worked fine. I installed Naturally Speaking on it and set up a profile. It worked fine from the initial session after installation but, after it had been closed, whenever I tried to restart it the program would load but any attempt to load my profile got the error message: The user file you have selected cannot be accessed. This could be because you do not have sufficient privileges to use it or because it is being accessed by another program."

Attempting to run the program as an administrator gets the message that it cannot be run in enhanced mode. I contacted Nuance (who make NS) and had a long correspondence with them.had no effect.After uninstalling and reinstalling a couple of times and ending up with the same result, I uninstalled it and ran a removal program from Nuance to clear every trace of it. Just recently - to solve a problem with windows that recently appeared - I reinstalled Windows 7 using the update facility on the Win7 installation disc. This worked fine and once again I only had the one single user who had administrator status. There were no working guest or other users.I tried Naturally speaking again with the same result. Once again I completely removed it from the system. I then set up a new user with Administrator privileges. Going into that user I installed NS again. This time it worked fine. I can start it from that user and it works well. If I go to the first user screen there is also an icon for Naturally Speaking but once again, if I start it I can't load my profile with the error message above.

It's not particularly convenient if I have to switch users to use NS. It all seems to be to do with Win 7 Administrator status. Can anyone suggest a way that the original Administrator (me) can get the same administrator privileges as the second user seems to have under his administrator status. It seems a ridiculous situation that one user can use it while the other can't.Sorry to have rambled on but I was trying to give as complete a picture as possible.[CODE]

View 7 Replies View Related

Get Sufficient Privileges Windows 7?

Nov 11, 2009

how to get sufficient privileges windows 7

View 16 Replies View Related

Windows 7 - Administrator Privileges To Deny For All

Apr 18, 2012

While attempting to set up a new computer on our network I seem to have lost access to many documents and lost permission to many folders. While setting up a new computer we began playing with what programs and documents the new computer could access. (The new machine is to be used for clients, and for internet/printing privileges) we did not want the computer to access anything on the network except the printer.

We did the above by right clicking on the public folders where we kept our documents, opening the security tab and restricting the permissions. We would then deny the new computer access via the ownership tab. This seemed to work as the new computer on the network had no access to our files but could still print to the printer on the shared network. I wasn't on the computer at the time, (my lackey status didn't permit as such) and I think somehow the other person managed remove our access to the programs/documents.

I think they did this by changing the admin privileges to deny for all. I am guessing that's what happened because now when I try and take ownership of the files I am unable to open them. It will let me take ownership of the files but then still says me access is denied when I try to open any of the selected files of documents. (does not prompt for password). In short, Is there a way to reestablish my admin privileges after what appears to be simple mistake on which account was selected?

View 2 Replies View Related

Telecharger Privileges Sufficient Windows 7

Oct 27, 2012

telecharger privileges sufficient windows 7

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved