I am unable to connect this webcam - this was working until recently. I receivde this message below when I tried to re install the software that came with the web camera or download other software. Can anyone advice me how to resolve this?"Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)"
have the same problem with my Canon G2 / Windows 7 home premium 64 bitsCamera is not recognised.Have downloaded a new DC WIA driver and still not recognised.Camera does not show up in computer or anywhere else. Will show under hardware stating driver not installed.
i am trying to solve issues with my canon camera on the computer. it can not open up and when i try to check the control panel it shows the yellow triangle sign of the device drivers missing.
Both the Windows Compatibility and Canon Compatibility sites state the Rebel XT is compatible with Windows 7. That is, no drivers need be downloaded.
The EOS utility which is used to establish communications between the Rebel XT and Windows 7 is only good for Vista and previous Windows operating systems (I tried it anyway with no luck, then removed it and conducted a shutdown - not a restart - to remove any traces).
When I plug the camera into the USB port the following appears: "Device detected, installing drivers" followed by "Device drivers not successfully installed". The Windows 7 troubleshooting utility comes up with "No drivers found".
On the other hand, my Canon Powershot SD950 IS was simply plug and play like the Rebel XT is supposed to be.
I have two HP laptops and a Canon SX130is digital camera. I am not using Canon's camera software -- I just want to download photos. Both computers are running Windows 7-64. Both are Home Premium Versions.On my HP Envy, USB recognizes, the camera, AutoPlay opens so I can select my action and I can also browse the memory card in Windows Explorer.On my HP DM4, USB recognizes the camera, but no AutoPlay on any USB port. SD memory cards and flash drives open AutoPlay, so the issue is about the camera on one computer.I have checked the AutoPlay settings, run net start shellhwdetect and the results are the same.
I have Windows 7. I also have a Canon Digital Rebel XT that I am trying to load the software onto my laptop. I have the original discs. Loaded them, plugged in the camera and got an error message that there is no driver for this camera. I downloaded the upgrades from Canon's website, still no luck. Windows states that this camera is compatible...
Upgraded from Windows XP to 7. When I plug the camera in, Windows Explorer "sees" it as "Canon Powershot A540" instead of "drive J:", so the Autoplay does not starteredThe LONG of it: Windows 7 won't recognize my camera as a drive, such as "drive J". Instead it sees it (in Windows Manager) as Canon Powershot A540, with subfolders "internal storage", and "external storage". Because of this, Autoplay doesn't come up when it is plugged in. My other camera, a Fuji A303, when plugged in, has the autoplay pop up, and is displayed as "drive J" in Windows Manager. If I take the SD card out of the Canon and put it in a USB card reader, the Autoplay pops up, and "sees" pictures, and Windows Manager calls the card Canon_DC (J A friend says the computer is seeing "plug and play" firmware in the Canon. Did I change something in the camera, or did some kind of software get on the SD card?
I have a new computer (Asus K53E) with Win 7 x64 - My camera is a Canon SD 750, and I'd like to use Photo Scape to work with my pics, not the Canon browser or the Windows Photo Gallery. So I've set my photos to import via Windows in Auto Play, and to auto delete afterward. The problem I'm seeing is that once the photos are imported into my computer and deleted from the camera, the little Windows pop up box that notifies me of the deleting process stays on the screen - it will not disappear until I either use Task Manager to stop it, or I reboot the computer. I really would like to continue using the simple and effective Windows process to import my camera's pics, and to continue using Photo Scape as my photo browser/editor.
How do I download a picture from my camera to my computer. Presently I am unable to do this. A friend advised me to download Canon software so that I can accomplish this task.
Vista x64 natively supported a bunch of canon printers with x64 drivers. For some printers this support has gone under Windows 7 x64. Perhaps this will help some people ... .
I mounted a Vista x64 ISO-image/source, extracted the folder with the canon printer drivers and installed the Colorpass Z40e driver under Windows 7 x64. In my case I used this driver für a Canon Colorpass Z400e (Canon CLC 1100).
Extraxct :
- use 7zip
- under options check "wim"
- open the install.wim an verify your vista version (important if there is a 64bit and 32 bit version on the same DVD, in my case there was only a 64bit on the systembuilder DVD)
- choose the right folder and extract the canon printer driver folder with 7zip
Upgraded desktop to 64-bit and discovered that my Canon LiDe80 and Canon PIXMA iP4000 drivers are incompatible. So after some research and not sure how accurate, I read that the professional version would allow more of the 32-bit drivers to work.
I have a office setup where two of the computers run on windows XP professional and the other two run on Windows 7 home edition. I want to connect all of them to a common printer through the port. Both the computers on win xp have been connected successfully but the other two on win 7 I am unable to connect, seems some patch is required.
I need to connect to a DNS Server over the internet. I have tried setting the DNS as the server IP but I really don't know what I'm doing when it comes to this. The server is running Server 2008.
I'm not sure if this is a Windows 7 problem or a Dell problem. My last 2 laptops were Gateway and I never had this issue, but I'm finding that A LOT of people are having this issue and no one seems to be able to help. I click on "find album info" to update my music library and the window pops up, but not much else. The little globe in the top left corner spins for a few seconds and my hourglass shows up until I move my cursor, but that's it. Just a blank white page.My browser of choice is Chrome, but I'm sure IE is default for this task.
1. I've made sure [URL] is listed in my trusted zone in internet options.
2. I've turned off wmp in "turn on or off features," rebooted and turned it back on again.
3. I've made sure in wmp I allow internet to replace missing info by going to organize - options - library
4. I never have "work offline" checked - ever - but I checked just to make sure.
5. I'm not 100% positive, but I'm sure my firewall settings are okay.
This has been driving me crazy for weeks. I really miss my Gateway that ran Vista because the player was a lot better and I miss the advance tag editor. And my last Gateway ran Windows 7 but I never ran into this problem. I'm wondering if this is a Dell problem. I just got this about a month ago and the 1st thing I tried to do was install Chrome because I abhor IE. But IE wouldn't let me download Chrome. Finally I found the .exe file on my last pc and was able to install that way. Could these issues be related? Maybe it's IE9.Also, some people get a script error when they click "update album info," but I (and a few others) just get a blank window.
Dell Inspiron Model: M5040 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: AMD E-450 APU with Radeon(tm) HD Graphics, AMD64 Family 20 Model 2 Stepping 0 Processor Count: 2
I have a Packard Bell EasyNote TJ71 laptop running windows 7. I use an HDMI cable to attatch to a flat screen TV and generally have no problem bringing up the second screen then changing over to the TV as the one screen when I watch a movie. I only need to do this as closing the lid on the portable switches it off.The problem I have is that I can not get the sound transferred to the TV,
I have a Dell Inspiron 1525 that I purchased in the USA, brought to the UK - had hard drive failure; which was replaced and then had Windows 7 OS installed (and now the laptop thinks it's a UK laptop too - ie: the @ symbol has moved - etc)... None of this has been a problem until recently when I moved back to the USA. I have a TV that I want to hook this laptop up to, so that we can view my video files on a bigger screen - but I've found that my laptop is displaying in PAL format - while the TV must have it in NTSC. I've been searching around and I cannot seem to find out where to change that over.... Should I put in an American DVD into the dvd player and switch regions?
When I connect my laptop to my LCD TV I can see windows 7 starting to load on the TV screen. As soon as Windows has installed the TV is not visible and windows can't detect it. Also some icons dissapear off my laptop screen.
I have purchase a switch to connect a laptop to a desktop computer, the first one having windows 7 (64 bits) and the second one having windows xp (sp 2 and 32 bits).have done the cables connection and nothing, absolutely nothing happens.The switch is OVISLINK EVO-FSH5C Fast Ethernet Switch
I have a Netgear Wireless Router WGR614-6VGUKS and a Netgear ADSL modem Router DG834 v4. Is it possible to connect to the Net wirelessly using these 2 and if so how? I have tried but with no success but not sure about order and connections. Looked on the Net but found info there confusing and not really answering my questions.
I have a hp 9810 us. Windows 7 os and Atheros AR5007 802.11b/g WiFi Adapter and a NVIDIA nForce Networking Controller/ I ran Combofix and when I boot up the computer The wi fi doesn't automaticly connect to the router. There is a switch on the front of the laptop with a indicator light red for off and blue for on. the switch is in the on position but I have to reset it in order for the computer to connect to the router.
I installed WINDOWS FIREWALL CONTROL on my Windows 7 system. I have Internet access with games but not with FIREFOX or MAIL WASHER PRO. I decided to not use WINDOWS FIREWALL CONTROL and deleted it from my computer (there was no uninstall entry). Now even though FIREFOX and MAILWASHER PRO is listed as being allowed by the Windows firewall I can not access the Internet. Should I use the system restore feature or am I missing something else. If I turn off the firewall I have access but of course that is not an option I want to go with
I have an HP laptop with Windows 7 on it and I just purchased a VGA cord in order to use my 50 inch Samsung Plasma TV as a monitor. (My main reason for doing this was to watch videos from HBO GO on it) I was able to get the hook up right and it does work; however, what is happening is that every once in a while, the picture on the TV screen disappears and it shifts back to my laptop screen. This lasts for about two or three seconds, then it shifts back to the TV screen. This does not appear to be happening at regular intervals; sometimes it happens ten times in a few minutes, sometimes it goes several minutes without happening.
My tv has a DVI-D "hdtv" input, and my Dell latitude d620 has a vga output, so I bought a vga to DVI-D adapter, but either my computer or tv still won't pick up each other's signal, and thus I am still left unable to view my computer on my TV. The TV doesn't have a vga input, nor does it say "computer" anywhere, as the newer tvs do.
I have an AOC 936swa LCD monitor and want to try and run my PS3 through it. The input into the monitor is via D-Sub and USB. I made the schoolboy error of thinking it was a DVI and buying an HDMI to DVI cable...face-to-palm moment there!
Is there an HDMI to D-Sub cable? I can't imagine the USB will be able to carry it. The output from from the PS3 is bog standard.
I've had windows 7 for about two weeks now, and when i first installed it every thing was fine, WMC was working the way it was suppost to with my 360. But one day it just stop working when ever i try to connect it says "contacting" then after waiting minute's for it to start it says "Connection failure".i don't know what could have stopped it from working but its driving me crazy trying to find out what the problem is. i tryeduninstalling my xbox extender from WMC, and setting it up, again with a new Setup Key.(i did this many many times now.)Disconnecting my router and connecting my 360 directly to my laptop (wired)
I've read posts on this but I still can't get it to work. I did have my Windows 7 connected to my XP, but it didn't work with XP to 7 so I started fiddling with my XP and now I can't access my XP through 7.I don't know if this affects anything but my XP is connected through an ethernet cord because the wireless was unreliable, but my Win 7 is wireless.When I pull up network places on my XP, all I get is a broken link that says 'My Web Sites on MSN', but when I was looking for my 7 from XP, I found it under all MSN network places but it was under a browse box so when I closed out from the browse box, I didn't find it.
