Unable To Install Canon Rebel XT Camera
Dec 30, 2009
Both the Windows Compatibility and Canon Compatibility sites state the Rebel XT is compatible with Windows 7. That is, no drivers need be downloaded.
The EOS utility which is used to establish communications between the Rebel XT and Windows 7 is only good for Vista and previous Windows operating systems (I tried it anyway with no luck, then removed it and conducted a shutdown - not a restart - to remove any traces).
When I plug the camera into the USB port the following appears: "Device detected, installing drivers" followed by "Device drivers not successfully installed". The Windows 7 troubleshooting utility comes up with "No drivers found".
On the other hand, my Canon Powershot SD950 IS was simply plug and play like the Rebel XT is supposed to be.
Any ideas?
View 1 Replies
ADVERTISEMENT
Jul 27, 2012
I can offload my pictures to an old WinXP computer, it isn't possible to lug that with us on vacation. I'm bringing my laptop.What can I do to get pictures on to my computer? The camera has only a 1GB CF Card, and I don't want to blow $30 on another card, or a card reader if it can be avoided.
View 4 Replies
View Related
May 8, 2011
my canon digital EOS Rebel will not download photos with my windows 7 hp..
View 2 Replies
View Related
Jul 8, 2012
Looking for a USB Driver for Windows 7 64 bit . For Canon Eos Rebel
View 2 Replies
View Related
Nov 18, 2011
Where can I get a download for my new computer for my Canon EOS Rebel DS6041 so I can transfer pictures to my computer?
View 3 Replies
View Related
Jun 10, 2012
I Need the Drivers for the canon rebel eos 300d.
View 1 Replies
View Related
Jun 26, 2011
have the same problem with my Canon G2 / Windows 7 home premium 64 bitsCamera is not recognised.Have downloaded a new DC WIA driver and still not recognised.Camera does not show up in computer or anywhere else. Will show under hardware stating driver not installed.
View 2 Replies
View Related
Jan 11, 2012
I am unable to connect this webcam - this was working until recently. I receivde this message below when I tried to re install the software that came with the web camera or download other software. Can anyone advice me how to resolve this?"Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)"
View 1 Replies
View Related
Jul 27, 2012
i am trying to solve issues with my canon camera on the computer. it can not open up and when i try to check the control panel it shows the yellow triangle sign of the device drivers missing.
View 1 Replies
View Related
Jan 24, 2012
I have two HP laptops and a Canon SX130is digital camera. I am not using Canon's camera software -- I just want to download photos. Both computers are running Windows 7-64. Both are Home Premium Versions.On my HP Envy, USB recognizes, the camera, AutoPlay opens so I can select my action and I can also browse the memory card in Windows Explorer.On my HP DM4, USB recognizes the camera, but no AutoPlay on any USB port. SD memory cards and flash drives open AutoPlay, so the issue is about the camera on one computer.I have checked the AutoPlay settings, run net start shellhwdetect and the results are the same.
View 1 Replies
View Related
Aug 31, 2011
I've a Canon SD1400 IS and my Gateway windows 7 operating system does not want to reconize it.What kind of software do I need to download?
View 1 Replies
View Related
Nov 16, 2012
I would like to download my Canon Power Shot SD1000 so I can send a picture to a friend I have windows 7.
View 1 Replies
View Related
Apr 23, 2010
I have Windows 7. I also have a Canon Digital Rebel XT that I am trying to load the software onto my laptop. I have the original discs. Loaded them, plugged in the camera and got an error message that there is no driver for this camera. I downloaded the upgrades from Canon's website, still no luck. Windows states that this camera is compatible...
View 7 Replies
View Related
Jan 20, 2012
Upgraded from Windows XP to 7. When I plug the camera in, Windows Explorer "sees" it as "Canon Powershot A540" instead of "drive J:", so the Autoplay does not starteredThe LONG of it: Windows 7 won't recognize my camera as a drive, such as "drive J". Instead it sees it (in Windows Manager) as Canon Powershot A540, with subfolders "internal storage", and "external storage". Because of this, Autoplay doesn't come up when it is plugged in. My other camera, a Fuji A303, when plugged in, has the autoplay pop up, and is displayed as "drive J" in Windows Manager. If I take the SD card out of the Canon and put it in a USB card reader, the Autoplay pops up, and "sees" pictures, and Windows Manager calls the card Canon_DC (J A friend says the computer is seeing "plug and play" firmware in the Canon. Did I change something in the camera, or did some kind of software get on the SD card?
View 1 Replies
View Related
Dec 27, 2012
I have a new computer (Asus K53E) with Win 7 x64 - My camera is a Canon SD 750, and I'd like to use Photo Scape to work with my pics, not the Canon browser or the Windows Photo Gallery. So I've set my photos to import via Windows in Auto Play, and to auto delete afterward. The problem I'm seeing is that once the photos are imported into my computer and deleted from the camera, the little Windows pop up box that notifies me of the deleting process stays on the screen - it will not disappear until I either use Task Manager to stop it, or I reboot the computer. I really would like to continue using the simple and effective Windows process to import my camera's pics, and to continue using Photo Scape as my photo browser/editor.
View 4 Replies
View Related
Nov 16, 2012
How do I download a picture from my camera to my computer. Presently I am unable to do this. A friend advised me to download Canon software so that I can accomplish this task.
View 1 Replies
View Related
Dec 13, 2009
How do I get Windows 7 to recognize my digital Rebel XT?
View 9 Replies
View Related
Apr 16, 2012
my system is not recognizing canon printer lbp 2900
View 1 Replies
View Related
Jan 2, 2013
My system is a windows 7 x64. it is connected via LAN cable to my wifi router (also used for internet). Prior to installing Canon Pixma MG5370 apps and driver, the windows works fine.My Canon printer is connected via WIFI to my router so in essence, I print through my router to the printer. No errors were encountered during the installation process.After all these, I noted that my windows will not shutdown anymore. After clicking shutdown, it will reach the screen where it shows "Shutting down" and a spinning disc like icon. and this is where it will remain and not power off at all.ard disk Led not blinking during this time. I had to do a HARD FORCE shutdown.
View 7 Replies
View Related
Jan 2, 2013
My system is a windows 7 x64. it is connected via LAN cable to my wifi router (also used for internet).Prior to installing Canon Pixma MG5370 apps and driver, the windows works fine.My Canon printer is connected via WIFI to my router so in essence, I print through my router to the printer.No errors were encountered during the installation process..After all these,I noted that my windows will not shutdown anymore. After clicking shutdown, it will reach the screen where it shows "Shutting down" and a spinning disc like icon. and this is where it will remain and not power off at all.hard disk Led not blinking during this time.I had to do a HARD FORCE shutdown.
View 3 Replies
View Related
Mar 7, 2012
How ican instal the web camera icon
View 2 Replies
View Related
Feb 12, 2012
i want to install samsung web camera in my system in windows 7 pl tell how todo
View 1 Replies
View Related
Aug 16, 2012
I installed my OS 7 ultimate few times and still can't install the camera device on lenovo ideapad z560 laptop even when I download the device from the official lenovo site. Itts says device not matched and when I open youcam it says there is no camera installed.
View 2 Replies
View Related
Jan 7, 2013
my video and voice call are not working in yahoo messenger
View 1 Replies
View Related
Oct 4, 2012
i want to install driver of camera in sony vaio laptop
View 1 Replies
View Related
Oct 20, 2012
i need software to install jvc digital video camera gr-d50 in win7
View 1 Replies
View Related
Feb 6, 2013
install web camera Eton for laptop Hp persario CQ61?
View 1 Replies
View Related
Oct 27, 2009
I have just installed Windows 7 64 bit dual booting with Windows Vista 32 bit.
I can't get drivers for my Canon CanoScan LiDE 50 Scanner to install on Windows 7 (works fine on Vista)
See on the Canon Website that they are not showing any Windows 7 drivers for this scanner which I can't get to work.
Tried LiDE 60 drivers but could not get these to install with my scanner.
Is there anything I can do to get this working. Or do I have to reboot Vista if I want to continue using this scanner?
View 9 Replies
View Related
Feb 16, 2009
I can't seem to get my Canon MP780 to install correctly on Windows 7 x64. I've tried running the installer as Admin, without UAC, and in compatibility mode.
Any ideas how to manually install the driver as I extracted the driver files but don't know how to apply them.
View 9 Replies
View Related
Jun 11, 2012
I cannot install my canon printer lp1000 on win7
View 2 Replies
View Related
Nov 10, 2010
I just wanted to relate my vexing problem and the ultimate solution which I dscovered after half a day, and it's something that Microsoft will probably never admit happens.I installed Windows 7 64 bit OS on my Toshiba Satellite, and could not get my Pixma iP3000 installed. I first tried the disc that came with, but I got messages to the effect that this will not work with my current sysytem. I looked all over the world at Canon download sites and could fine everything BUT the Windows 7 64 bit driver.Everywhere else I got the same tip: Just plug in your printer fresh into a recently re-started computer, and the system should recognize it and install the driver. Well, it attempted to do this the first time, but it notified me that it did not have the driver!Following another tip, I prompted Windows update to have a go. Surprise, it discovered some new updates to install. Lo and Behold, one of them was a Pixma iP3000 driver update! but DAMN, that one update failed to install, and after failing a retry it just would NOT attempt it again. The message was something to the effect of, "We decided you don't need that."The solution: I started from scratch. I re-installed Windows 7 64 bit after deleting the partition. I ran the first run of Windows update. Before installing anything else, I turned on and connected my printer. Again, it said, "Yes, we see this is a Pixma iP3000, but we don't have the driver." Then, keeping the device connected, I did Windows Update again, and several updates, including the Pixma iP3000 driver update, appeared. It installed correctly this time.
View 1 Replies
View Related
