Canon LiDE 50 Scanner Won't Install
I have just installed Windows 7 64 bit dual booting with Windows Vista 32 bit.
I can't get drivers for my Canon CanoScan LiDE 50 Scanner to install on Windows 7 (works fine on Vista)
See on the Canon Website that they are not showing any Windows 7 drivers for this scanner which I can't get to work.
Tried LiDE 60 drivers but could not get these to install with my scanner.
Is there anything I can do to get this working. Or do I have to reboot Vista if I want to continue using this scanner?
View Replies (Posted: 10-27-2009)
Sponsored Links:
Related Forum Messages for Windows 7:
Canon Lide 35 Scanner
Has anyone managed to get this working yet, I have tried xp/vista/32/64 bit drivers and can't get it to work, I have also tried compatibility mode etc.
Posted: Sunday, February 08, 2009 4:46 AM
View 11 Replies!
View Related
Canon LIDE 25 Scanner Issue
I had been running Windows 7 Ultimate RC, since July. When I plugged in my scanner, it went and found the correct software (CanoScan Toolbox), and my scanner worked perfectly. This weekend I installed Windows 7 Pro. When I plugged in the same scanner...nothing happened. So I installed the CanoScan toolbox, using the setup CD that came with the scanner. I didn't think much of it. Subsequently, I pushed a button on the scanner, and Windows Fax and Scan opened, and the scanner made a terrible noise. When I open the CanoScan toolbox, and try to scan, it says "unable to select TWAIN source." I have tried the troubleshooter, downloaded the driver and the entire CanoScan program (for 64-bit Vista) from Canon's website, and tried many other fixes.Â
Posted: Monday, September 21, 2009 1:40 AM
View 2 Replies!
View Related
Canon CanoScan LIDE 20 Scanner
I'm unable to get Win7 to recognize my CanoScan LIDE 20 scanner. any ideas how to make it work? I suspect that there are no 64-bit drivers available from Canon. is there a Win7 mode I can exploit?
Posted: Tuesday, July 28, 2009 6:16 PM
View 3 Replies!
View Related
Canon CanoScan LiDE 20 Scanner Issue
I got an old canon scanner, a lide20, and i run windows7 x64 edition.Canon doesn't release x64 drivers for this scanner so, in win7, i tried to install it in xp mode...all was perfect, scanner is attached, installed and working... even pretty fast. The problem is that, when you restart win7, xpmode don't auto attach the scanner, so you must, all the times, to launch the virtual machine, attach the scanner, close vm and launch scanning program.It will be really great to have the opportunity to decide what and what not to be defaulted attached to vm.
Posted: Wednesday, June 24, 2009 11:42 PM
View 4 Replies!
View Related
Problem With Canon Scanner LiDE 500F
I cannot scan with my Canon LiDE 500F from within Windows Fax and Scan. The following error message appears : No scanners were installed. If a scanner is installed, make sure that it is powered on and connected to the computer, and then try again. It is connected and powered via USB. It shows under devices in control panel - Right click on it's icon and then properties : it is working properly. - Right click on it's icon and then Scan Profiles or Scan Properties : I get an error message telling that I need a WIA driver. I cannot find a WIA driver for it on the Canon site. Does anybody have a WIA driver for this LiDE 500F ? Or does anybody have a workaround to make this work ?
Posted: Friday, August 14, 2009 2:50 PM
View 19 Replies!
View Related
Canon Scanner LiDE 500F Problem
I use my Canon scanner LiDE 500F with the latest Vista-software ScanGear & Toolbox from Canon (there are no specific Windows 7 versions available yet). I have installed the software in Vista compatibility mode and they work very well, until Windows 7 goes into the sleep mode. When I wake up Windows 7, the function-buttons of the scanner do not respond anymore. They normally start the Toolbox followed by the ScanGear driver in the corresponding button-mode.
Posted: Tuesday, August 04, 2009 3:14 PM
View 2 Replies!
View Related
Drivers For Scanner Canon LIDE 600F
Trying w7entrerprise parallel to vista, I wanted to install my scanner Canon LIDE 600F. So I phoned Canon to hear which drivers (vist?) I should use. The disappointing answer was: After the official start we give no answers. I think that this will happen with qa lot of other hardware. So no real chance to test w7. What is Your opinion?
Posted: Tuesday, September 15, 2009 8:07 AM
View 2 Replies!
View Related
Unable To Select TWAIN Source - Canon LIDE 25 Scanner Issue
I had been running Windows 7 Ultimate RC, since July. When I plugged in my scanner, it went and found the correct software (CanoScan Toolbox), and my scanner worked perfectly. This weekend I installed Windows 7 Pro. When I plugged in the same scanner...nothing happened. So I installed the CanoScan toolbox, using the setup CD that came with the scanner. I didn't think much of it. Subsequently, I pushed a button on the scanner, and Windows Fax and Scan opened, and the scanner made a terrible noise. When I open the CanoScan toolbox, and try to scan, it says "unable to select TWAIN source." I have tried the troubleshooter, downloaded the driver and the entire CanoScan program (for 64-bit Vista) from Canon's website, and tried many other fixes.
Posted: Monday, September 21, 2009 1:43 AM
View 3 Replies!
View Related
Epson NX400 Scanner Driver Won't Install
Tried installing the scanner both from the installation CD and updated Vista 64bit drivers, and I get an error asking me to restart and try again. After restart same problem happens. Printer drivers install fine, it's just the scanner drivers. Called Epson and they have no beta drivers for Windows 7. Anybody know of a work-around? If I can't find a solution soon, i may have to go back to Vista...
Posted: Thursday, January 22, 2009 7:31 PM
View 4 Replies!
View Related
Canon LiDe 80 And Canon PIXMA IP4000 Problem
Upgraded desktop to 64-bit and discovered that my Canon LiDe80 and Canon PIXMA iP4000 drivers are incompatible. So after some research and not sure how accurate, I read that the professional version would allow more of the 32-bit drivers to work. Is that correct?
Posted: Â Â Â Â Â 11-08-2009
View 4 Replies!
View Related
Installing Scanner CanoScan Lide 20
I upgraded my system from XP pro to Win7 64 Pro. My scanner is still resisting to is installation. Did not succeed yet I downloaded the Win7 driver from Canon site, but drivers is not installing. No message, no result, nothing.
Posted: 11-10-2009
View 9 Replies!
View Related
Canon Scan Lide 500F Not Working
I have a Canon Scan Lide 500F, plugged on Windows Vista computer with the following driver: Lide500fvst11220a_xpen. On Canoscan Toolbox when I press SCAN the scanner makes the processing noise and a window comes up saying: "processing calibration data from the scanner (about 1 to 2 minutes required) do not open." About 3 to 4 seconds later a new window pops up saying: "Calibration can not be performed. Pull out the film and place Place the Film Adapter Unit at Frame 1." On the FAU there is nothing plugged because I do not have one. and I dont know which film I am supposed to pull out. when I press "OK" on this window another window comes up saying: TWAIN data transfer error."
Posted: Thursday, November 26, 2009 9:30 PM
View 2 Replies!
View Related
XP And 7 Install Issues (Won't Boot Into Win 7 Install)
I have XP SP2 installed. I used EASEUS Partition Master to split my drive in half, one half being XP, the other half being a future install of Windows 7. Put DVD in, selected the blank partition, began the install. Once it gets to the first reboot, it will reboot and go straight into XP. There is no option to choose Windows 7. The XP boot.ini has only one entry for XP. Does anyone have any suggestions? I'm thinking I need to add an entry for Windows 7, but have no clue what to put and I'm also guessing I'd have to add a few special tags because it's booting into the setup process of Win 7.
Posted: 11-01-2009
View 7 Replies!
View Related
Can't Install Canon Image Class D340 Copier
Does anyone know how I could get my Canon Image Class D340 copier to work with Windows 7? I have the disk but it won't install the driver. We use this copier on our home network but my laptop which has win 7 on it won't recognize it at all. There are no update drivers. Is there a way to make this work? We have Vista on the main computer which networks the laptops and also a HP psc 1300 series printer/scanner which is the other printer we can't make it recognize. Having both printers that Win 7 won't recognize is the pits! Is there anyway around this problem?
Posted: Saturday, August 08, 2009 11:18 PM
View 8 Replies!
View Related
All Programs Won't Display And Speech Recognition Won't Start
My speech recogntiion won't start. I don't have a system restore that far back, but it hasn't been working since 3, maybe 4 updates back and I am now just getting around to it, since I have had other concerns lately. The error I get is "Speech recognition could not start because the language configuration is not supported. The recognizer language must match the language of the user interface. Please change the recognizer language in the Speech Recognition control panel under Advanced Options." I go there and press certain buttons and I sometimes get the error message "The requested task can not be carried out because the neccesary engine can not be created. Please select a different engine and/or audio device." I have tried changing the laguage and then restarting and it still won't work. I am using the same mic I was using before when it worked. I have not installed any new sound drivers when it stopped although I have looked for the sound drivers since and there are no new ones. I also had two other problems after the same Windows 7 update with the All Programs not displaying in the Start Menu, but I have dont a temporary fix with that, but it is still not working the way it is supposed to as I had to make a new sub folder in the Programs folder and change the location to that folder every time I start up Windows and so now I go into All Programs and then a second folder, which is ok for now, gonna write a batch file to do it for me anyway. The other problem is that my sidebar wouldn't start, but I think I fixed that last night. As my gadgets are now working.
Posted: Sunday, August 16, 2009 11:05 PM
View 5 Replies!
View Related
ATI Driver Won't Install
I have a Toshiba Satellite Laptop and I installed Windows 7 Build 7100 on it. However, Open GL games do not work, and I have the ATI 8.56 graphics driver installed and I am trying to upgrade it to the latest 8.61. However, after I run the installer, my screen does not blink and once installation is complete, I do not see a change in the driver version - and catalyst is not installed as well. However, when i am trying to re-install it says the drivers are already installed. Any ideas as to whats going wrong? Its a 32-bit OS. I cannot run any OpenGL games, they fail saying it could not load OpenGL.
Posted: 05-05-2009
View 1 Replies!
View Related
Network HP Printer Won't Install
Trying to install an HP 2100 tn printer through a Linksys router to a Win 7 62 Pro machine. Win 7 drivers for Asus MB, Marvell Card and latest firmware for Linksys router. Tried Win 7 printer installation routines a jillion times...and it couldn't find the printer (power cycled router and printer several times). Used HP latest network diagnostic but it can't find the printer. Used latest PCL 5, 6 and PS drivers from HP - nothing. Used netsniffer with HP diagnostic and it looks like the diagnostic sees the printer (reports the correct i.p. address) but doesn't identify it as a printer. Went back to XP where the printer works and found it is currently working with IPX protocol. Anyone have any ideas? I don't want to buy a new printer, or stick with XP.
Posted: 2 Weeks Ago
View 9 Replies!
View Related
Sigmatel Audio Drivers Won't Install
Have a tablet PC that I just installed Seven onto. Even though it's an old box, Windows update found nearly all of the drivers. The one it didn't find is for the AC97 Sigmatel audio. So, I grabbed the drivers I used for Vista (they're actually XP drivers) and tried to install them. Did this again and again, using different compatibility modes every time. Got no indications of failure, but never worked, either. Tried removing the device and having Windows Update search for a driver. No luck. Tried installing driver from selecting from list. Only Sigmatel driver in the list is for HD -- which I don't have. Even tried the MS WDM driver -- and it refused to install it. I read in another thread that there are supposedly generic AC97 drivers --but I can't figure out how to install them. The relevant driver files from Vista are STAC97.sys and staco.dll -- which tells me this is a STACS AC97 audio chip. But I just can't figure out how to get a driver installed.
Posted: 06-24-2009
View 7 Replies!
View Related
Conexant AC-Link Drivers Won't Install
I have a HP Pavilion zv600 (model zv6123cl). The drivers section for my computer on HP.com only lists XP drivers, which fail to install. The Vista section (http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=500261&lc=en&cc=us&dlc=en&lang=en&cc=us&y=6&x=8) only has drivers for the quick launch buttons. I've also downloaded the package suggested at http://social.technet.microsoft.com/Forums/en-US/w7itprohardware/thread/f4dfec8a-e2c9-44b0-ac8b-f8dcfe80ab4a, but these also fail, even when checked for running as admin in Vista compatibility mode. Windows Update doesn't have any downloads. Device manager lists the device as "Muiltimedia Audio Controller", with the little exclamation point. Does anyone have any other drivers for the Conexant CX20468-31 AC97 Audio that might work with Windows 7?
Posted: Friday, January 30, 2009 1:44 PM
View 2 Replies!
View Related
Adobe Flash Won't Install In Firefox 3
Have read previous threads on Flash, and made sure I'm the administrator: my first name (Barend) is shown as administrator. Still, I am often getting the msg "Page can only be viewed with Flash player- Install?". Instead of installing I only get the option to download. Starting the download first leads to failure, then the W7 msg "Do you want to start with the approriate settings?" and then I can choose between IE and Firefox. But it still doesn't install correctly, because empty pages and the msg as in line 2 keeps appearing.
Posted: Saturday, May 16, 2009 10:54 AM
View 5 Replies!
View Related
South Bridge Drivers Won't Install
I just built desktop with ASUS M4A78 Plus mobo and was getting BSODs constantly using windows 7 64-bit. I just installed XP 32-bit and ti's running fine. One thing I noticed is on XP the south bridge drivers installed but on Windows 7 whenever I tried to install them using catalyst manager or driver from ATI's site it would not install. It would attempt to install the north bridge drivers which the log would say successful but catalyst manger would always say they weren't installed. Has anyone experienced this problem or now a fix for it?
Posted: 01-07-2010 at 05:05:16 PM
View 2 Replies!
View Related
Windows Upgrade Advisor Won't Install
Trying to install Win 7 Upgrade Advisor on a two-year old Vista machine (DELL XPS 420). Clicking the setup icon to install gets me nothing. No installation screens, no warnings, no errors, nothing. I tried installing on an older XP laptop and the software installs there just fine. I've checked the other related topics and they seem to be related to problems installing on XP, not Vista. Any ideas what I'm missing? I've never encountered an installation that fails before it even starts.
Posted: Monday, October 26, 2009 11:24 AM
View 21 Replies!
View Related
Upgrade From Vista, Won't Finish Install
I've tried four times to upgrade my vista 64 bit to windows 7, everytime it gets to about 62% complete it just stays there. I'll leave it running for two days and it just won't finish. I've have over five thousand my lastest build, and it all runs great on Vista 64. The compatibility wizard shows no issue before I start the upgrade. If I boot to the CDrom first with the windows 7, it starts coping the disc and then I get the Friggin BLUE Screen, everytime. I've been building sytems for over fifteen years, I've owned every kind of windows ever made. I've probably paid for Bill Gates car (one of them anyway).I could do a clean install, but I don't want to pay for all the software I've installed again.
Posted: Wednesday, December 09, 2009 9:41 PM
View 4 Replies!
View Related
|
TRACKER
