Clean Install BSOD Suddenly When Loading Cubase Project
Jul 14, 2011
The blue screen seem to accour when trying to load a Cubase (music production program) file, randomly. Can work for hours without anything happening.Can someone plz tell me what file it's pointing to? Or if its hardware related.So far I only get blue screens when my firewire sound card is connected and I'm running Cubase. But I don't wanna blame the sound card - it's too expensive for that Before reinstalling windows last BSOD was pointing related to OrangeWare Corp. (usbehci.sys) - I have NO idia what this file is.Could it be my PSU? 2 years old 560w Hiper - Supposed to be high quiality.Should I run my memory using bios XMP profile? Tried it once, but the cpu got hotter so i disabled it.
I am still having issues with the webpage not responding ie9. I am using w7. I used the upgrade version w7 to change from vista, could I do a clean install using the upgrade version, where can I get the info on how to do this and what programs I need to back up?
When I try to do a clean install of Windows 7 I get the loading files white progress bar you normally get during an installation, it then goes directly to the scrolling progress bar that would normally appear before a Windows startup, and then goes to a blank Windows 7 desktop with only a cursor (that I can move).I have a computer with the following specs:[CODE]I have tried to install with every version I can get my hands on, both 32 and 64 bit. None of them are upgrade versions. I've tried installing on a fresh WD Raptor and an Intel G25 SSD. All other drives have been disconnected. I've moved my memory around and tried with one stick. My mainboard has the latest official BIOS, although there is a new beta.
I ran the Windows 7 compatibility test and didn't see anything that would cause this problem.I have searched the internet and have not been able to find a solution sonstalling Windows XP has never been a problem, just Windows 7, always with the same problem.This is one of the few times when I have not been able to look around a find an existing answer to a problem and I am stumped.
I have been having a lot of blue screens for the past few weeks. I have tried running a disk check and memcheck and those didn't find any problems. I just did a fresh install of windows 7 64 bit and have been having the same problems.
Windows 7 Pro x86 (32-bit) Original installed OS OEM Age of system (hardware): 2010 December Age of OS installation: Two days. I did complete SFC /SCANNOW without any errors. I've run a diagnostic on the memory that didn't turn up anything and my case is running cool. I have several others from the same lot that are all working well (including the one I'm on now). I did get my first BSOD this time around after install of SP1 install without restart yet. After installing AVG (I know...) it occurred again. I can't really give this computer to anyone until it doesn't crash randomly.
- x64 ? - the original installed OS on the system - full retail version - What is the age of system (hardware)? approx. 1 year, ssd drive new - What is the age of OS installation (have you re-installed the OS?) clean install
I have recently (4 days ago)aquired a new Crucial 128Gb ssd drive and performed a clean installation of windows 7 64bit, since then i have been experiencing random BSODs (3 times so far)All software is genuine. Have performed full malware and antivirus check. Results are clean.
So I was getting a lot of BSODs (one every 10 minutes once I logged in) and it was a DRIVER_POWER_STATE_FAILURE and I couldn't figure out which driver it was. Finally I bought a new SSD and took my old HDD out and did a clean install of Windows in hopes that the BSODs would stop. To my displeasure, they keep coming back. I have a Toshiba A505-S6975 and all of my drivers appear to be up to date according to Windows (although they all say they are from 2009).
at first i wanted to upgrade from 7000, but after the first reboot i saw blue... (BSOD)
then i thought, it would be better to do a clean install, burned the ISO on DVD and again saw BSOD even before installation progress has started (after Windows had collected information and first boot)...
now to my question:
is the BSOD caused by a bad ISO, or is anything wrong with my system?
I am trying to install windows 7 on a MSI PM8M3-V motherboard, but every time it gets to the "completing installation" step, it BSOD's and doesn't give me enough time to read the errors before it restarts. I have tried everything, I installed xp just fine, and ran the W7 upgrade advisor, and it says everything is fine. BIOS is updated, every setting in the BIOS has been fudged with to no avail. no memory problems, disk errors, etc. I tried installing with everything disconnected, and a different AGP video card, still nothing I've tried installing from DVD-ROM and USB, both give the same result The crazy thing is that this board, memory, HDD combo has had W7 installed and running fine before, it's just when I put it into a new case it is not installing.
I use a 1.5 year old aces aspire 5738z and I think it just died on me. Here is what happens. Whatever I do it cannot stay without a BSOD for more than 10 minutes. I tried reinstalling drivers and it did not change anything so I tried several things but finally just formated it and installed windows again. I actually got a BSOD while installing windows from an original CD so im pretty sure my problem is hardware related. I did a check of the ram with Memtest for approx 45 minutes (one full cycle) and found nothing. I did a quick test of the HD with an other program and it did not find anything either so im starting to think its the graphics card that is dying.
Here are some specs
Core Duo T4200 Mobile Intel GM45 Express 2x 2048MB
I have just installed windows 7 64-bit Ultimate. I have Tested RAM (MemTest), HDD (windows), SSD(windows), GPU (Furmark)
BSOD: 1. Running only windows update, no drivers or any other software installed. 2. Running windows update and using browser (Google Chrome), AV (Microsoft Security Essentials) 3. Booted in Safe Mode with network connection.
Spec: Asus P8Z-77-V-Pro HDD 500GB Segate baracuda SSD 60GB Corsair Force 3 (windows is installed here) 8GB RAM Corsair vengeance Nvidia GTX560 ti TOP factory overclocked Intel i5 2400s 3,7Ghz
So I received a solid state drive for Christmas last year and haven't had any luck with installing it. I'm doing everything I can to rule out that it was DOA considering that at this point it's probably past warranty and I don't really wanna drop the money on a new one.I've tried to replicate the crashes but have had no luck. There appears to be no conditions required for the system to crash, so my initial thought was some kind of hardware malfunction.
So i upgraded my motherboard/chip a month or so ago and everything seemed to be working great. The part that worried me was when I swapped out the Mobo/chip,I didnt do a clean install because i had no way to back up any information. (there was really nothing important to back up besides 20gb of music and my saved game files). So what I did was after the swap, I put in the reinstallation disc, chose custom options, installed a custom version of windows and copied over my User folder from the "windows.old" file in to the new User folder. Something didn't feel right, despite ecerything working jsut fine, so I made this post a while back:
[URL]
Now, last night, I finally recieved my 32GB flash drive in the mail so I can do everything the correct way. I copied my User file over to the flash drive and found a guide on-line with screenshots on how to correctly do a clean install. 1 hour later I had a new version of Windows on my HDD and alomst instantly I started to have BSODs, one after another!!
Most, if not all BSODs had the 0x00000124 code. After doing a simple google search, I found that this is a vague hardware issue Yes, I OC'd my cpu. Its a i7 2600k. Why wouldn't I? NO, I didn't revert my mobo to the default settings before doing the clean install. Can this be part of the issue?
Random thoughts/information:
-After the clean install, I used the mobo disc to install drivers
-After the clean install, I used the EVGA disc to install drivers, as well as went to their website to get the lastest (i got the driver dated 2/21/2012)
-I use a wireless mouse and wireless keyboards (logitech) and the dongles were left in while doing the clean install
-My HDD is 1 TB in capacity. For some reason it says only 931GB in the control panel. (this is big concern, because before I did the mobo swap/custom install, i could have sworn it said 1024GB
-Am I looking at needing to wipe the drive entirely? Using DBAN or something rather than just a clean install?
I have installed all betas I could find, all were/are running fine. But the RC is a lot of pain. It fails into BSOD at the last step of the install "Completing installation". The error reads BAD_POOL_HEADER. I tried 64bit only.
I verified the ISO checksums, I have read the recommendations here, tried Safe mode, disabled display, installed from disc or from inside Windows, from HDD, changed BIOS settings to safe defaults... No luck. I even tried to integrate newest video drivers from nvidia.com using vLite.
My PC is Q6600, Gigabyte P35ds3l, 6Gb ram, evga Nvidia 8800gts, old WD Raptor 74Gb, USB mouse and kbd, Dell lcd.
I'm a new user for cubase 5. When I play back what I have recorded it seems that I hear the track in about 1/2 - 1 second delay than where the cursor is pointing. Also, if I record with metronome clicks I hear the high pitch click (which is supposed to be the first on out of each 4 beats) on the second beat.
I have a fairly new laptop that suddenly, for two weeks ago went VERY slow. The start up time has increased from about 1 minute, to about 5-6 minutes. And it is generally slower, and freezing occasionally (The ones that freeze the most are programs like flash player (while browsing) and "explorer".) Although it gets faster after a while, it hasn't been as fast as when I got it. And not only that, for about 4 days ago when I was about to go to bed, I turned the "sleep mode" on. (It takes about an hour or so for it to run faster, and not freeze as much.) Anyways, it usually takes some time for the sleep mode to turn on, because of the laptop being as slow as it is. So I had fallen to sleep before the bsod had occurred
I have an emu 1820m soundcard installed in my computer. It seems to be functioning perfectly. I can play dvd'd, cd's, iTunes, etc and the sound plays through my speakers without a problem. I want to record some sounds from a dvd but i cant get anything to record. Recording device is set to Wave EMU DSP as the default device. Im using Audacity to record and have set the recording preference device to be Wave (E-MU _-DSP). When I hit record I get an error 'Error while opening sound device. Please check the input device settings and the project template'And I cant record anything.In the built in Windows sound recorder, when I hit record, I get this error 'An audio recording device cannot be found' Everything seems to be functioning perfectly, yet i just cant record anything.
i followed the same issues and solution shown here:[URL]..but the problem is, when i go to that folder using command prompt, i dont see any cachecat.cache file, only driver.rtl in codeintegrity.
I'm not sure steam had anything to do with the crash the computer was idle and not really being stressed. The computer and its parts are all relatively new, some parts up to a year old. All drivers are up to date, as far as im aware. I think the bsod code was something lik 0x000000124. Any idea what caused it ? Driver or hardware related?
While loading windows 7 64 bits ultimate i have several, if not many, crashes. Although loading my other system (XP SP3 32bit) don't have any crash by loading it (sometimes).i'm kinda tired of this problem, it annoys me and keeps me wasting time
When I get the login screen, I just see the buffer LED glowing for 1 minute. Then it calms down. Then after logging in, the buffer LED keeps glowing for 5 minutes and my computer is terribly slow. If I do nothing through all this operation and just wait, all will be okay. So usually I can use my laptop after 8 minutes from turning it on.On the other hand, if i directly start opening applications before the buffer LED turns off (sometime only firefox), I directly get the bsod. Each time I get a different code for it. Why is this happening? Please find below the laptop specs and things that I have tried. [code]
I have a computer which gives me a blue screen when I turn it on. Sometimes this will happen 4 times in a row and others I can't even get the blue screen. I didn't record the error code down but I am trying to replicate the issue and when I get the screen I will update this post.
- x86 (32-bit) or x64 ? x86 - the original installed OS on the system? Windows 7 Enterprise - an OEM or full retail version? OEM - What is the age of system (hardware)? 3 years - What is the age of OS installation (have you re-installed the OS?) 2 months
while I was on wireless, which I think the problem might originate from, I had 3 BSODs within a span of 30 minutes. Two of the BSODs were linked to opening Netflix on Firefox and the other was caused by opening a Flash app on Chrome. If I recall correctly, the last BSOD error was something akin to Driver not less or equal? Regarding the dump files, when I went to double check that a dump file was created upon BSOD, I noticed that the option to have it overwrite was checked, so I'm not sure if the previous two BSOD dump files were recorded. Some of my previous older BSODs (which the issue was solved) were included in the folder, I believe, since the program just captured everything in the minidump folder.
PC Specs: Windows 7 64Bit OEM- Original Unmodified 1TB HDD 8GB RAM NVIDIA Geforce GTX 550 Ti - Driver Version 285.62 (also tried beta 290.53) AMD FX -6100 Six-Core Processor ~3.3GHz System and Hardware = 9 Days old 23" LED Screen
Portal 2 starts up normally, gets to the loading screen where it says Portal 2, then Crashes/Blue Screens the Computer
I've recently built a new PC, it's my first build and I've managed to solve most problems that have occurred but I'm stuck on this one. It will load games fine if i load them straight from turning on the PC but if i run it for a while then load a game it resets itself, and doesn't leave and mini/memory dumps. The system runs fine normally and even with some old games but if i load a new game such as civilization 5 on steam or try running examples in UDK it resets.
Specs:
Mobo: Asus Maximus IV Extreme CPU: Intel Core i7 - 2600k Ram: 8GB G.Skill RipjawsX Graphics: Sapphire Radeon HD 7970 3GB PSU: Antec High Current Pro HCP -750 SSD: Samsung 830 256GB HD: Seagate Barracuda 2TB Cooling: Antec Kuhler H20 920 OS: Windows 7 64bit Home Premium
At first i thought it was overheating but I've checked and the CPU and graphics card don't reach anywhere near a hot temperature before it crashes. I've also taken it to a local computer repair shop and the tests they ran all passed (i don't know what the tests they ran are but i'm going to call them tomorrow and find out / tell them it still crashes)
tell me if a re-install from a system image file on my notebook is as good as a clean install from say a retail disk.I can not format all my drive and start a fresh. Can my System image file become glitchy or infected with a virus.?
I'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
