BSOD After Clean Windows Install?
Jul 31, 2012I have a home build that was running excellently for 6 months until I decided to reinstall Windows 7 Pro. Since then I have had constant blue screens.
View 3 Replies
ADVERTISEMENT
Windows 7 BSOD During Clean Install
Mar 18, 2011I am trying to install windows 7 on a MSI PM8M3-V motherboard, but every time it gets to the "completing installation" step, it BSOD's and doesn't give me enough time to read the errors before it restarts. I have tried everything, I installed xp just fine, and ran the W7 upgrade advisor, and it says everything is fine. BIOS is updated, every setting in the BIOS has been fudged with to no avail. no memory problems, disk errors, etc. I tried installing with everything disconnected, and a different AGP video card, still nothing I've tried installing from DVD-ROM and USB, both give the same result The crazy thing is that this board, memory, HDD combo has had W7 installed and running fine before, it's just when I put it into a new case it is not installing.
View 1 Replies View RelatedFormat, Clean Windows Install - Still Same BSOD
Jan 6, 2012I use a 1.5 year old aces aspire 5738z and I think it just died on me. Here is what happens. Whatever I do it cannot stay without a BSOD for more than 10 minutes. I tried reinstalling drivers and it did not change anything so I tried several things but finally just formated it and installed windows again. I actually got a BSOD while installing windows from an original CD so im pretty sure my problem is hardware related. I did a check of the ram with Memtest for approx 45 minutes (one full cycle) and found nothing. I did a quick test of the HD with an other program and it did not find anything either so im starting to think its the graphics card that is dying.
Here are some specs
Core Duo T4200
Mobile Intel GM45 Express
2x 2048MB
BSOD Windows 7 64bit Clean Install
Sep 3, 2012I have just installed windows 7 64-bit Ultimate. I have Tested RAM (MemTest), HDD (windows), SSD(windows), GPU (Furmark)
BSOD:
1. Running only windows update, no drivers or any other software installed.
2. Running windows update and using browser (Google Chrome), AV (Microsoft Security Essentials)
3. Booted in Safe Mode with network connection.
Spec:
Asus P8Z-77-V-Pro
HDD 500GB Segate baracuda
SSD 60GB Corsair Force 3 (windows is installed here)
8GB RAM Corsair vengeance
Nvidia GTX560 ti TOP factory overclocked
Intel i5 2400s 3,7Ghz
Dump's files is attached...
Numerous BSOD After Clean Install Of Windows 7
Feb 28, 2012So i upgraded my motherboard/chip a month or so ago and everything seemed to be working great. The part that worried me was when I swapped out the Mobo/chip,I didnt do a clean install because i had no way to back up any information. (there was really nothing important to back up besides 20gb of music and my saved game files). So what I did was after the swap, I put in the reinstallation disc, chose custom options, installed a custom version of windows and copied over my User folder from the "windows.old" file in to the new User folder. Something didn't feel right, despite ecerything working jsut fine, so I made this post a while back:
[URL]
Now, last night, I finally recieved my 32GB flash drive in the mail so I can do everything the correct way. I copied my User file over to the flash drive and found a guide on-line with screenshots on how to correctly do a clean install. 1 hour later I had a new version of Windows on my HDD and alomst instantly I started to have BSODs, one after another!!
Most, if not all BSODs had the 0x00000124 code. After doing a simple google search, I found that this is a vague hardware issue Yes, I OC'd my cpu. Its a i7 2600k. Why wouldn't I? NO, I didn't revert my mobo to the default settings before doing the clean install. Can this be part of the issue?
Random thoughts/information:
-After the clean install, I used the mobo disc to install drivers
-After the clean install, I used the EVGA disc to install drivers, as well as went to their website to get the lastest (i got the driver dated 2/21/2012)
-I use a wireless mouse and wireless keyboards (logitech) and the dongles were left in while doing the clean install
-My HDD is 1 TB in capacity. For some reason it says only 931GB in the control panel. (this is big concern, because before I did the mobo swap/custom install, i could have sworn it said 1024GB
-Am I looking at needing to wipe the drive entirely? Using DBAN or something rather than just a clean install?
BSOD After Clean Install?
Nov 7, 2012I have been having a lot of blue screens for the past few weeks. I have tried running a disk check and memcheck and those didn't find any problems. I just did a fresh install of windows 7 64 bit and have been having the same problems.
View 9 Replies View RelatedBSOD 41(63), Second Clean Install?
Jan 24, 2012Windows 7 Pro x86 (32-bit) Original installed OS OEM Age of system (hardware): 2010 December Age of OS installation: Two days. I did complete SFC /SCANNOW without any errors. I've run a diagnostic on the memory that didn't turn up anything and my case is running cool. I have several others from the same lot that are all working well (including the one I'm on now). I did get my first BSOD this time around after install of SP1 install without restart yet. After installing AVG (I know...) it occurred again. I can't really give this computer to anyone until it doesn't crash randomly.
View 5 Replies View RelatedBSOD After Clean Install On New SSD Drive
Jun 28, 2012Is Windows 7
- x64 ?
- the original installed OS on the system
- full retail version
- What is the age of system (hardware)? approx. 1 year, ssd drive new
- What is the age of OS installation (have you re-installed the OS?) clean install
I have recently (4 days ago)aquired a new Crucial 128Gb ssd drive and performed a clean installation of windows 7 64bit, since then i have been experiencing random BSODs (3 times so far)All software is genuine. Have performed full malware and antivirus check. Results are clean.
BSOD Keeps Happening After Clean Install
Aug 28, 2012So I was getting a lot of BSODs (one every 10 minutes once I logged in) and it was a DRIVER_POWER_STATE_FAILURE and I couldn't figure out which driver it was. Finally I bought a new SSD and took my old HDD out and did a clean install of Windows in hopes that the BSODs would stop. To my displeasure, they keep coming back. I have a Toshiba A505-S6975 and all of my drivers appear to be up to date according to Windows (although they all say they are from 2009).
Here is some information:
ntoskrnl.exentoskrnl.exe+e96c2fffff800`02a1d000fffff800`030050000x005e80000x4fa390f35/4/2012 3:18:59 AMMicrosoft� Windows� Operating SystemNT Kernel & System6.1.7601.17835 (win7sp1_gdr.120503-2030)Microsoft CorporationC:Windowssystem32
toskrnl.exe
and
atikmdag.sysatikmdag.sys+562f00fffff880`040db000fffff880`046f20000x006170000x4a8a1a8b8/17/2009 10:05:47 PM
Attached are my dump files.
BSOD RC 7100 X64 At Clean Install
May 2, 2009i just downloaded windows 7 rc x64.
at first i wanted to upgrade from 7000, but after the first reboot i saw blue... (BSOD)
then i thought, it would be better to do a clean install, burned the ISO on DVD and again saw BSOD even before installation progress has started (after Windows had collected information and first boot)...
now to my question:
is the BSOD caused by a bad ISO, or is anything wrong with my system?
by the way: Beta 1 Build 7000 x64 works fine.
BSOD Ntoskrnlexe Clean Install Corruption
Oct 31, 2011So I received a solid state drive for Christmas last year and haven't had any luck with installing it. I'm doing everything I can to rule out that it was DOA considering that at this point it's probably past warranty and I don't really wanna drop the money on a new one.I've tried to replicate the crashes but have had no luck. There appears to be no conditions required for the system to crash, so my initial thought was some kind of hardware malfunction.
View 4 Replies View RelatedWin7 7100 Clean Install - BSOD BAD_POOL_HEADER
May 7, 2009I have installed all betas I could find, all were/are running fine. But the RC is a lot of pain. It fails into BSOD at the last step of the install "Completing installation". The error reads BAD_POOL_HEADER. I tried 64bit only.
I verified the ISO checksums, I have read the recommendations here, tried Safe mode, disabled display, installed from disc or from inside Windows, from HDD, changed BIOS settings to safe defaults... No luck. I even tried to integrate newest video drivers from nvidia.com using vLite.
My PC is Q6600, Gigabyte P35ds3l, 6Gb ram, evga Nvidia 8800gts, old WD Raptor 74Gb, USB mouse and kbd, Dell lcd.
Clean Install BSOD Suddenly When Loading Cubase Project
Jul 14, 2011The blue screen seem to accour when trying to load a Cubase (music production program) file, randomly. Can work for hours without anything happening.Can someone plz tell me what file it's pointing to? Or if its hardware related.So far I only get blue screens when my firewire sound card is connected and I'm running Cubase. But I don't wanna blame the sound card - it's too expensive for that Before reinstalling windows last BSOD was pointing related to OrangeWare Corp. (usbehci.sys) - I have NO idia what this file is.Could it be my PSU? 2 years old 560w Hiper - Supposed to be high quiality.Should I run my memory using bios XMP profile? Tried it once, but the cpu got hotter so i disabled it.
View 5 Replies View RelatedCannot Install 0x80070714 When Try To Install Windows 7 Into Clean Disk / Installation Just Stops
Feb 13, 2013I am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..
View 3 Replies View RelatedBSOD After Clean Windows 7
Feb 23, 2012first I would like to apologize for not writing this thread according to BSOD post instructions but my problem is so specific that I am not able to comply with them. My problem follow thread I have posted here a week ago, I have purchased new SSD from Kingston (SSDNow V200 128GB) a few weeks ago. But I was not able to install Windows 7 on it (BSOD all the time). I thought that I have got damaged SSD, so I claimed it in my vendor. The claim was solved in the way that I have got new same SSD (only exchange for new one was performed). So i tried to perform clean install of Windows 7 32 bit CZ Pro SP1 on it, but again, during installation process I have got a lot of BSODs. So I changed mode from AHCI to ATA in BIOS. After that I successfully performed installation and booted into win 7. I changed back mode to AHCI according to this tutorial: Improve SATA hard disk performance (Convert from IDE to AHCI) and everything was ok. I started to install updates (via windows update), but after installation and reboot I got BSOD again.
View 9 Replies View RelatedIDT Audio Drivers Won't Install - Windows 7x64, Clean Install?
Jan 30, 2012I'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
Performance Difference Between Windows 7 Clean Install And Upgrade Install
Feb 3, 2010Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
View 3 Replies View RelatedIs Clean Install Still A Way To Install Windows 7 With Upgrade Disc On A New Hdd
Jun 29, 2010I have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
View 9 Replies View RelatedUnable To Install Windows 7 - Clean Install
Jan 31, 2010I'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:
Intel Core 2 Duo 3.12 Ghz
nVidia GeForce 9800 GTX 512 MB PCI-e
320 GB Western Digital HD SATA
1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM
I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.
edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.
Clean Install Of XP Over Windows 7?
Apr 6, 2012i've had enough of 7, I use my PC for music and after months of installing/uninstalling/re installing/researching/driver checking etc. i've decided i'm just not going to get things working with 7.
I have my XP disc and i'm ready to do a clean install, but i'm struggling to get it going... what do I do!? Inserting the XP disc brings up the autopay but the option to install is greyed out, which I understand as it's a step down. However, when I press f12 on booting to try to boot my pc from disc it just locks on the boot menu. What can I do to get a clean install of XP going?
Can't Do Clean Install Windows 7
Jun 18, 2012I have been having numerous problems over the past wk. The firewall won't stay on, can't do windows updates etc. I have run Vipre as my anti virus and also mbam and superantispyware and everything is coming back clean. Today I decided to just backup my documents etc and then do a clean install. Now the problem is that the DVD burner doesn't show up in the BIOS. It shows up in my computer and it's running fine. If I format it out of the computer can I get windows to install from that DVD drive?
View 2 Replies View RelatedClean Install Windows 7?
Aug 10, 2009i wanna Format my C:/ drive and Clean install Windows 7 beta..
im inserted W7 DVD and restarted my computer.. bt doesn't Boot From Windows 7 DVD .My first boot Devise is DVD rom.second Boot Devise is HDD...
Clean Install Of Windows 7 Pro Going As Bad As Possible
Feb 26, 2010I didn't notice until I tried 2 burns. Then I resorted to downloading elsewhere and after 3 more downloads I got the right file(verified by hash) for 64 bit Windows Pro English. Burned the iso to my thumb drive fine, seemed to install fine and fast on this system: [code] Have 2 500GB spinpoint F3s in raid 0 and 1(setup in bios correctly and in raid menu bios fine)190GB raid 0, 375GB raid 1 using Intel raid after mostly done with install it said it had to restart so it did, but since I used a USB thumb drive it tried booting from that again instead of finishing install. I redid the install after fixing partitions and it seemed to go fine this time I removed the drive when it restarted. I was actually finally in windows 7!After installing a couple drivers I needed I restarted then things went bad.Could no longer enter windows normally because once it loaded the screen went blank.It automatically installed gfx drivers but the monitor drivers aren't installed and I was incapable of installing them after 1-2 hours trying to figure out a way. Monitor didn't show up in device manager.Monitor is an Acer2051w.I could get into safemode and try to mess with stuff.I was able to uninstall video drivers then boot into windows normally but it would automatically install the same driver and I wouldn't be able to get back in again. Automatic driver installation was off by the way.
So I couldn't fix this so I decided to reinstall Windows 7. The install went through fine, said it had to restart to finish up and after restarting the screen would stay blank forever. Doesn't seem to be installing properly now.So I can't get it installed again, and when it was it wasn't working properly. I have the monitor drivers even but no way of installing them so Windows is screwing up setting a bad resolution/ settings for the display that I can't fix hence the blank screen issue.
Clean Install Of Windows 7
Apr 11, 2011I have a retail Upgrade DVD for Windows 7 Home Premium which I purchased. I did a clean install by wiping my hard drive using the format partition option on the Windows 7 DVD. I had Vista installed on the HDD before the upgrade so the installation program could "SEE" that I had a qualifying version of Windows to validate the upgrade key.Activation was successful.Now, I want to start a clean slate. However, I don't have Vista installed anymore, just Windows 7.Can I reinstall with an upgrade key on a blank, reformatted hard drive? Will activation pass?Or do I need to reformat with the installation program on the DVD?Finally, I made an image of my Vista operating system before I upgraded, do I need to restore the image so my Win 7 DVD can once again "SEE" the qualifying Windows version?There are forums out there that say different things, yes you can, no you can't, well it depends.
View 3 Replies View RelatedClean Install Windows 7 Pro On New SSD
Apr 5, 2012I have a new, 120gb solid state drive I want to install windows 7 pro, 64-bit on. Does windows 7 take care of whatever formatting is needed automatically? Does it let me pick allocation size and type of formatting (e.g. NTSF versus another type)?
View 5 Replies View RelatedClean Re-install Of Windows 7 X64?
Aug 10, 2010I recently had my system crash after a bad update for my graphics card and I've tried to re-install windows a number of times and have had no luck.I have tried a few of the tutorials here and formatted my HDD to try for a new clean install. I get through the first part of the install, but once my PC reboots it keeps trying to load from the disk and then I get into windows boot manager. I try to select the start windows normally option and then I get an error message saying 'Windows failed to load because the system registry file is missing or corrupt'.I have the original windows X64 product disk.
View 3 Replies View RelatedClean Install Of Windows 7
Sep 21, 2010I am about to migrate over to Windows 7 Pro this week, just waiting for a new video card. I have XP Pro (Sp3) now. I will be using a Win 7 Pro upgrade disk. I want to start with a fresh formatted HD, I will being using a second hd (D) with XP PRO installed, will I be able to use C, or must it be installed on the same HD partition(D)? I seem to recall something about having to be on the same partition.
View 9 Replies View RelatedWindows 7 32 To 64 Bit Clean Install?
Nov 7, 2010if I am already running Windows 7 32 bit on a 2Core, can I suubsequently do a clean install of Windows 7 64 bit?
what are the main advantages of 64 over 32 bit?
Windows 7 Clean Re-install From COA Key?
Aug 1, 2011I am preparing to do a clean install on my HP laptop, as the HP Windows 7 (that came from the factory) is bloated and messed up...So, I have backed up everything and am ready to insert the retail disk and install Windows 7. I am going to use the COA key on the bottom of the laptop. Using this key, during the installation menu, will it work fine and accept it? Will I have to call Microsoft
View 7 Replies View RelatedWhat To Do After A Clean Install Of Windows 7
Mar 30, 2012I just did a clean install of Win 7. I have the intel network driver so I'm online but that's it. I have no drivers or programmes at all. What to do next.Yes I forgot to do a backup. It did create an oldwindows folder.I have genuinely activated my Win HP.I have a HP Dv7t 64-bit.
View 6 Replies View RelatedCan't Do Clean Install Of Windows 7 On New HDD
Sep 29, 2012i have tried to install windows 7 on a brand new HD and it comes up with:"windows setup could not configure windows to run on this computers hardware" i have tried 3 times and still get the same error message. i have put the HD into another machine and installed windows 7 successfully so it can't be the new HD- the recovery disks appear to have no surface damage.i have previously installed windows 7 on new HD's on this machine before using the same recovery disks with success-what has gone wrong this time? is my computer damaged somehow? before i put in the new HD my computer was infected with a virus but this could only damage the old HD?
View 9 Replies View Related
