Change Icons For Dvd And Hard Disk Drives

May 8, 2009

how to change icons for dvd drives? hard disk drives? I used to do that with Tune Up Utilities under Vista but it doesn't work on Windows 7...

View 5 Replies


ADVERTISEMENT

Change Dynamic Hard-disk To Basic Hard-disk?

Nov 26, 2012

i can not install dual-both window7 and window8 on my computer.i think that may be my hard is dynamite.not basic.

View 13 Replies View Related

How To Disable Hard Disk Drives

Oct 22, 2011

how put password for "MyComputer"

View 2 Replies View Related

Cannot Change Boot Priority Among Hard Drives?

Aug 12, 2011

Originally I had a small solid-state hard drive on this set up. I added a non-solid-state hard drive later. Recently, my solid-state drive, the C Dr., became too full to upgrade certain software programs such as Dragon NaturallySpeaking. I purchased a second solid-state hard drive.I "mirrored" that second solid-state hard drive. To make sure that Windows was operating appropriately, I rebooted and hit F10. I then showed the new solid-state hard drive. Everything booted perfectly and the new solid-state hard drive was noted as the C Dr.When I rebooted into bios to change the hard drive boot order so that the new second solid-state hard drive would be the first in the priority, when I highlighted it and exited from it,it still showed the original solid-state hard drive as the first hard drive.I have never had this problem before. I now have to go into F10 every time I boot into my computer and highlight the new solid-state hard drive.

View 5 Replies View Related

Merging Partition Or Hard Disk Drives

Jun 4, 2009

i installed windows 7 and i don't know what i did wrong, but this is what i end up with

C: 1.66 GB free of 9.44 , where as i have total of 80 GB hard drive. and then i have drive "E" which has 64 GB hard drive.

so how can i merge this two drive?

View 2 Replies View Related

Set Up Did Not Find Any Hard Disk Drives During Installation?

Feb 20, 2012

Set up did not find any hard disk drives during installation?

View 1 Replies View Related

Drive Letters Change When Swapping Hard Drives?

Sep 30, 2012

I have two 1TB drives, each containing 4 partitions, used for backing up 4 computers. These drives are regularly switched between buildings as part of our backup strategy, always having one off-site. I have assigned drive letters M,N,O,P to respective partitions. When I swap the drives, the drive letters get reset and have to be manually reassigned. assigning the drive letters, including USBDM, but get no results.

Computers: HP Compaq 8200 Elite - CMT - 1 x Core i5 2500 / 3.3 GHz - RAM 4 GB - SSD 1 x 160 GB - DVD�RW (�R DL) / DVD-RAM - HD Graphics 2000 - Gigabit Ethernet - Windows 7 Professional 64-bit - Intel vPro Technology Docking Stations: ICY DOCK MB877SK Hard Drives: SAMSUNG Spinpoint F3 HD103SJ 1TB

View 8 Replies View Related

Cannot See Hard Drives In Disk Management Or In Device Manager

Jun 11, 2010

I have completely formatted my hard disk with seagate seatool. Then I have installed windows xp sp3. I have made 4 partitions at that time i.e. c,d,e,f. After that I have installed windows 7 now I can't see my hdd in disk management or in device manager. Both device manager & disk management are showing me my external drives like pen drive.

View 9 Replies View Related

Can't Find 2nd Internal Drive Listed Under Hard Disk Drives

Jun 21, 2010

I am running windows 7 home 64 bit (build 7600). I have a gateway fx7026. It has two internal hard drives. When I look under device manager they are both listed and they are both listed under the bios menu. When I look in my computer though under hard disk drives it only shows the one that I have the OS on. When I had Vista it showed both of them. Is this something I should be worried about. The drives are listed as WDC WD3200AAJS-22B4A0 DRIVE 1 and WDC WD3200AAJS-22B4A0 DRIVE 0.

View 7 Replies View Related

Can't Find Drives On Installing Windows 7 & Hard Disk Test Failed?

Sep 6, 2012

I have a HP Probook 4530swith Windows 7 Home Premium 64 bit. When I turn on the PC the windows does'nt start and give a option of starting windows manually, which does'nt work, and repair windows. Repairing windows with windows 7I then decided to reinstall windows 7, but while installing, on the select disk page, it shows a error saying no drives found.I then performed a Hard Disk Test which resulted in failure saying:Failure ID : UC7WX0-5NB67S-XD6V5G-60TF03

View 2 Replies View Related

EIDE Hard Drives Connected And Show In BIOS But Not In Disk Manger

Nov 12, 2012

I have two 250gb drives that are connected to my one Eide connection on my Asus P5Q deluxe Mobo. They show in the bios and on startup, but not in my computer or drive manager? How can I get them to show up so I can format and use them as extra space.

View 3 Replies View Related

Disk Management No Longer Automatically Assigning Drive Letters To External Usb Hard Drives

Aug 14, 2011

I use a lot of different usb hard drives in my shop. I have two basic enclosures, a generic one that uses pata drives on a usb 2.0 cable and an Apricon USB SATA 2.0 adapter.Suddenly when I plug in a new drive device manager does see the drive and installs it in device manager. I can see the drive in Disk Management but it has no drive letter assigned, and therefore doesn't show up in Computer. I can easily just assign a letter in Disk Management and the drive immediately becomes usable. However, I would like to get Windows 7 to resume automatically assigning a drive letter.

I have tried a program called USB DriveCleanup. What it appears to have done is remove all installations of prior USB drives and when I plug in a drive that has been in the machine previously it then goes thru the install again. Yet still no drive letter. I think the program is doing what would manually be done by going into safe mode and cleaning out all the entries that build up there that don't appear in normal mode, then removes them. Basically it seems like a shortcut to manually doing it.

I also tried a registry fix that essentially asked me to delete the upper and lower filters. This seems similiar to fix for CD/DVD drives that no longer appear in Computer. This fix also didn't work.I tried removing and reinstalling the chipset drivers. Still no go.Running Windows 7 Pro SP1, H55 chipset.

View 1 Replies View Related

Hard Disk Icon Change?

Jul 31, 2011

iwant to change my partation icon so how can i change

View 1 Replies View Related

Keep Getting "not Enough Disk Space" With 2 Hard Drives

Sep 19, 2012

I have to harddrives, drive :C/ and drive D :/ drive c has the basic miniums and came with 16 gbs of space which is completely full with windows , then drive d has 136gbs and is 103gb of free space left ANYTHING i try to download i try to make it go to Drive D but none the less i keep getting the error "not enough disk space"

this is a brand new system, that a friend whos good with computers built for me for my gaming needs, i have a intel r core tom 2 quad cpu 6600 @ 2.40GHz 4 gb ram 64 bit operating system..

View 2 Replies View Related

Hard-drives Apparently Corrupted After Attempted To Install A Second Hard Drive?

Oct 8, 2011

make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?

View 5 Replies View Related

Red "x" On Disk Icons, Desktop Icons Changed?

Mar 12, 2010

Finally I have found the place where my problem might get solved.Thing is: 1.There is a big "X" on 3 out of 4 disks I got(except "C" disk) as shown in the picture below: 2.Desktop icons are changed as well but not all of them.This is the second time this kind of crap happens to me. Last time it happened was after I clicked system backup. I couldn't stand the problem so I reinstalled my windows 7 pro 32bit and at first it was all ok. It came back after I rebooted which I couldn't figure out why. The only diffrence is last time all the desktop icons were changed, but this time as you can see some of the icons aren't changed.

View 6 Replies View Related

Hard Disk Boot Failure Insert System Disk Press Enter

Mar 29, 2012

im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.

View 6 Replies View Related

Hard Disk Error 'disk Structure Is Corrupted And Unreadable'

Sep 10, 2012

I have IOmega 1 TB hard drive. 2 days ago, my comp restarted suddenly after which my external drive is corrupted.I get the error 'H: is not accessble' The disk structure is corrupted and unreadable.It shows up in the disk management as RAW file system,I have almost 700 GB of important documents, pictures & files that I don't want to lose.Does anybody know of any good recovery software that can help.

View 5 Replies View Related

Optical Disk Installation Of Windows 8 After A Hard Disk Crash?

Oct 22, 2012

I purchased a new PC with Windows 7 in June 2012. It came with a Samsung optical disk containing Windows 7. I am eligible for the $14.99 USD upgrade to Windows 8.Will there be an installation disk for Windows 8 available at this price and if not, then how much more will it cost?If not, then how should I ensure that I can easily install Windows 8 after a hard disk crash? Do I have to keep my Samsung optical disk of Windows 7?

View 5 Replies View Related

Hard Disk Is Empty And Windows 7 Os Shows Disk Usage Is 75%

Jul 20, 2011

in my hardisk with G: size 465gb xp shows that 74.86 gb is remaining space......while space used is 0 , there are no hidden files, nothing in the disk K: size 186gb same as above and remaining is 35 gb according to windows xp i: size 196gb .in this only 9 gb is used and xp shows that 10gb is remaining//

i remember, last week everything was ok and all of sudden this problem has occurred. all other drives are ok only these three are way over their own heads.

my system is

Intel Core i5-2300 cpu@2.8ghz
2.79ghz,3.48 GB of RAM
and windows is 32 bit/

View 2 Replies View Related

Can I Install Win7 On A New Hard Disk Using A Upgrade Disk ?

Nov 13, 2009

I have few questions on Windows 7 Upgrade. Currently I'm using windows vista home premium 64 bit and I bought an windows 7 home premium 64 bit upgrade disk.

first thing is I want to format my previous operating system and all the data in my laptop and install windows 7 in it using the Upgrade disk.

second thing is I don't have my vista installation disk with, my laptop was pre-installed with vista so in future if I want to switch can I get back VISTA using system restore.

third is can i install windows 7 on a new hard disk using a windows 7 Upgrade disk?

View 4 Replies View Related

Cant Find Any Disk Drives?

Nov 9, 2011

have used ATI for a long time with no problems on various machines, including my Windows 7 Ultimate, x86 computer. this machine has a WD black caviar sata lll 500gig hdd, but is connected on sata ll (mobo doesn't support sata lll). have just got a new machine which is running windows 7 ultimate x64. it has the same hdd as the machine mentioned above, but is connected as sata lll on the mobo. ATI told me that it couldn't find any disk drives, so i couldn't back up the hdd. i discovered that WD put out their own version of ATI, so i downloaded it, installed it and made a recovery cd. this gives me the same error that it cant find any disk drives so i still cant back up the hdd. didn't see why but thought it may be the o/c settings, i reverted back to stock but no difference. windows backup works, but produces a hell of a big file compared to ATI.

View 6 Replies View Related

Two Hard Drives Same CPU?

Apr 6, 2011

i built me a gaming computer with windows 7, its up and running. I have a old Dell with Windows Xp that i have had for 5 years. I want to put that hard drive in my new computer. is this possible? will there be any conflicts? I want to make it so maybe in bios i can select witch OS to boot up. Or maybe it defaults to Win7 and i can switch to WinXp whenever i wanted.

View 5 Replies View Related

Use 2 PC Hard Drives?

May 16, 2011

I've recently purchased a PC with 1 64GB SSD and 1TB HD. Contrary to instructions the seller uploaded everything onto the SSD at C: and not just the OS. He now says I should use a disk partitioner to transfer the files. Also to reset my BIOS.

View 5 Replies View Related

Win 7 And 2 Hard Drives

Dec 16, 2009

I currently have a dual boot of Windows Vista Ultimate on one hard drive and Windows 7 RC1 on the other and was planning on

upgrading to Windows 7 ultimate. I have could either upgrade my Vista hard drive which would be easy or I could upgrade the release candidate Windows 7 which is a fresh install on a new drive. Which should I put Windows 7 on?

View 4 Replies View Related

How To Use 2 Hard Drives As 1

Feb 5, 2013

If I Format my Hard drives ,do I lose all my systems ,Like Windows???

View 4 Replies View Related

Computer Won't Recognize Disk Drives

Jun 15, 2011

I have switched CPUs in order to upgrade my system, but I have copied over all the important files from my old computer. The current CPU was used by my dad before me and worked perfectly. It runs on Windows 7. However, since unplugging the tower and moving it back to my room, it no longer recognizes any of my CD/DVD drives. They are both functioning, turning on and opening and closing, but they are not listed under COMPUTER. I have tried several fixes on this site including merging my registry with a file on Notepad and running a program called cdgone but it still doesn't work. When my computer boots up I go to a screen with F2 that allows me to view my system. The drivers are listed as off but when I switch them over the computer will not let me. [code]

View 1 Replies View Related

How To Change Icons In My Pictures

Oct 21, 2012

how do I change the icons in My Pictures to a mini version of the photo rather than the default non descript form that is there now?

View 2 Replies View Related

Can't Change Taskbar Icons

Mar 20, 2011


So I found a cool theme and icons to go with it. I understand how to change icons and such but I am having trouble with some. (the official Microsoft icons)

Here's my situation.

So I found in the tutorials how to change the icons. I was able to change the libraries icon assuming that when had it on the taskbar, it would change the icon as well.

I was able to change the libraries icon to what I want. I created a library shortcut. then when i pinned it to the taskbar, it changed back to the default, but only on the taskbar

Also, when i try to change the wmplayer.exe and explorer.exe icon through the properties, explorer.exe crashes as soon as I apply.

View 8 Replies View Related

How To Change Icons Of Some Programs

Sep 22, 2011

The programs I cannot change are skype, my documents, my pictures, my downloads and my music. I am also using windows 7 home 64 bit. I just need to know how to fix Skype now.

View 5 Replies View Related

Program To Change Icons

Oct 13, 2009

Has anyone written a simple program to allow for changing program icons ion Windows 7? I set VLC as the default program for .iso files, and each one shows up at that stupid traffic cone. I want to choose a custom icon.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved